Filtrate flow rate in case of a rotary drum vacuum filter (in which Rm < < Rc ) is proportional to __________ and the cycle time (where, μ = filtrate viscosity Rm = filter medium resistance Rc = cake resistance). (A) √μ (B) 1/√μ (C) 1/μ (D) 1/μ

Filtrate flow rate in case of a rotary drum vacuum filter (in which Rm <
< Rc
) is proportional to __________ and the cycle time (where, μ = filtrate
viscosity Rm = filter medium resistance Rc = cake resistance).
(A) √μ
(B) 1/√μ
(C) 1/μ
(D) 1/μ
by

1 Answer

Answer :

(B) 1/√μ
by

Related questions

Filtration rate through a filter cake is proportional to (where, S = filtering surface R = specific cake resistance μ = viscosity of the filtrate) (A) S (B) 1/R (C) 1/μ (D) All (A), (B) & (C)

Description : Filtration rate through a filter cake is proportional to (where, S = filtering surface R = specific cake resistance μ = viscosity of the filtrate) (A) S (B) 1/R (C) 1/μ (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

The controlling resistance in a rotary drum vacuum filter is the __________ resistance.(A) Piping (B) Cake (C) Filter medium (D) None of these

Description : The controlling resistance in a rotary drum vacuum filter is the __________ resistance. (A) Piping (B) Cake (C) Filter medium (D) None of these

Last Answer : (B) Cake

According to Poiseuille's law, the permeability for gas flow through a capillary is proportional to (where, μ = gas viscosity) (A) μ (B) 1/μ (C) √μ (D) μ

Description : According to Poiseuille's law, the permeability for gas flow through a capillary is proportional to (where, μ = gas viscosity) (A) μ (B) 1/μ (C) √μ (D) μ

Last Answer : (B) 1/μ

For laminar flow of Newtonian fluids through a circular pipe, for a given pressure drop and length & diameter of pipe, the velocity of fluid is proportional to (where, μ = fluid viscosity ) (A) μ (B) 1/μ (C) √μ (D) 1/√μ

Description : For laminar flow of Newtonian fluids through a circular pipe, for a given pressure drop and length & diameter of pipe, the velocity of fluid is proportional to (where, μ = fluid viscosity ) (A) μ (B) 1/μ (C) √μ (D) 1/√μ

Last Answer : (B) 1/μ

Filtration capacity of a rotary drum vacuum filter depends upon the (A) Cake thickness (B) Characteristics of the feed slurry (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Filtration capacity of a rotary drum vacuum filter depends upon the (A) Cake thickness (B) Characteristics of the feed slurry (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Vacuum is applied in __________ zone, in case of a general type continuous rotary drum vacuum filter(A) Filtering(B) Washing(C) Drying(D) All (A), (B) & (C).

Description : Vacuum is applied in __________ zone, in case of a general type continuous rotary drum vacuum filter. (A) Filtering (B) Washing (C) Drying (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

In case of a plate and frame filter press, filtrate flow through the cake follows __________ flow. (A) Plug (B) Turbulent (C) Laminar (D) None of these

Description : In case of a plate and frame filter press, filtrate flow through the cake follows __________ flow. (A) Plug (B) Turbulent (C) Laminar (D) None of these

Last Answer : (C) Laminar

During filtration operation, the filtrate encounters the resistance of the (A) Filter medium (B) Cake (C) Channel carrying the slurry to the upstream side of the cake and filtrate away from the filter medium (D) All (A), (B) and (C)

Description : During filtration operation, the filtrate encounters the resistance of the (A) Filter medium (B) Cake (C) Channel carrying the slurry to the upstream side of the cake and filtrate away from the filter medium (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The speed of a rotary drum vacuum filter may be about __________ rpm. (A) 1 (B) 50 (C) 100 (D) 500

Description : The speed of a rotary drum vacuum filter may be about __________ rpm. (A) 1 (B) 50 (C) 100 (D) 500

Last Answer : (A) 1

__________ is used for producing a thick suspension from a thin slurry. (A) Cartridge filter (B) Rotary drum vacuum filter (C) Pressure filter thickener (D) Plate and frame filter press

Description : __________ is used for producing a thick suspension from a thin slurry. (A) Cartridge filter (B) Rotary drum vacuum filter (C) Pressure filter thickener (D) Plate and frame filter press

Last Answer : (C) Pressure filter thickener

For separation of sugar solution from settled out mud, we use a __________ filter. (A) Sparkler (B) Plate and frame (C) Centrifugal (D) Rotary drum vacuum

Description : For separation of sugar solution from settled out mud, we use a __________ filter. (A) Sparkler (B) Plate and frame (C) Centrifugal (D) Rotary drum vacuum

Last Answer : (C) Centrifugal

Flow of filtrate through the cake in a plate and frame filter press is best described by the __________ equation. (A) Kozeny-Carman (B) Hagen-Poiseuille’s (C) Fanning's (D) Kremser

Description : Flow of filtrate through the cake in a plate and frame filter press is best described by the __________ equation. (A) Kozeny-Carman (B) Hagen-Poiseuille’s (C) Fanning's (D) Kremser

Last Answer : (A) Kozeny-Carman

As per Newton's law of viscosity, the shear stress for a given rate of angular deformation of fluid is proportional to (where, μ = fluid viscosity) (A) 1/μ (B) μ (C) μ 2 (D) 1/μ

Description : As per Newton's law of viscosity, the shear stress for a given rate of angular deformation of fluid is proportional to (where, μ = fluid viscosity) (A) 1/μ (B) μ (C) μ 2 (D) 1/μ

Last Answer : (B) μ

Percentage of drum submerged in the slurry in case of rotary drum filter is (A) 3 (B) 30 (C) 85 (D) 25

Description : Percentage of drum submerged in the slurry in case of rotary drum filter is (A) 3 (B) 30 (C) 85 (D) 25

Last Answer : (B) 30

A straight line is obtained on plotting reciprocal of filtration rate vs. the volume of filtrate for __________ flow of filtrate. (A) Compressible cakes and laminar (B) Incompressible cake and laminar (C) Compressible cake and turbulent (D) Incompressible cake and turbulent

Description : A straight line is obtained on plotting reciprocal of filtration rate vs. the volume of filtrate for __________ flow of filtrate. (A) Compressible cakes and laminar (B) Incompressible cake and laminar (C) Compressible cake and turbulent (D) Incompressible cake and turbulent

Last Answer : (B) Incompressible cake and laminar

With increase in drum speed, in a rotary drum filter, the filtration rate (A) Increases(B) Increases linearly(C) Decreases(D) Is not affected

Description : With increase in drum speed, in a rotary drum filter, the filtration rate (A) Increases (B) Increases linearly (C) Decreases (D) Is not affected

Last Answer : (A) Increases

. In filtration, the use of 'filter aid' helps in (A) Reducing the filtration pressure (B) Accelerating the rate of filtration (C) Deplugging the filter medium (D) Enhancing the cake porosity in case of a dense impermeable cake

Description : . In filtration, the use of 'filter aid' helps in (A) Reducing the filtration pressure (B) Accelerating the rate of filtration (C) Deplugging the filter medium (D) Enhancing the cake porosity in case of a dense impermeable cake

Last Answer : (C) Deplugging the filter medium

In continuous filtration (at a constant pressure drop), filtrate flow rate varies inversely as the (A) Square root of the velocity (B) Square of the viscosity (C) Filtration time only (D) Washing time only

Description : In continuous filtration (at a constant pressure drop), filtrate flow rate varies inversely as the (A) Square root of the velocity (B) Square of the viscosity (C) Filtration time only (D) Washing time only

Last Answer : (A) Square root of the velocity

For classification of potable (drinking) water, we use a __________ filter. (A) Gravity sand (B) Plate and frame (C) Vacuum leaf (D) Rotary vacuum

Description : For classification of potable (drinking) water, we use a __________ filter. (A) Gravity sand (B) Plate and frame (C) Vacuum leaf (D) Rotary vacuum

Last Answer : (A) Gravity sand

For removal of very small amounts of precipitate from large volume of water, the most suitable filter is the __________ filter. (A) Plate & frame (B) Shell & lea(C) Sand(D) Rotary vacuum

Description : For removal of very small amounts of precipitate from large volume of water, the most suitable filter is the __________ filter. (A) Plate & frame (B) Shell & lea (C) Sand (D) Rotary vacuum

Last Answer : (C) Sand

The most suitable filter for the removal of very small amount of precipitate from very large volumes of water is the __________ filter. (A) Vacuum (B) Sand (C) Plate & frame (D) Rotary

Description : The most suitable filter for the removal of very small amount of precipitate from very large volumes of water is the __________ filter. (A) Vacuum (B) Sand (C) Plate & frame (D) Rotary

Last Answer : (B) Sand

Filtration rate does not depend upon the (A) Pressure drop & area of filtering surface (B) Resistance of the cake & the septum (C) Properties of the cake & the filtrate (D) None of these

Description : Filtration rate does not depend upon the (A) Pressure drop & area of filtering surface (B) Resistance of the cake & the septum (C) Properties of the cake & the filtrate (D) None of these

Last Answer : (D) None of these

The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate(B) Pressure(C) Both (A) & (B)(D) Neither (A) nor (B

Description : The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is (A) Added to the feed slurry (B) Pre-coated on the filter medium prior to filtration (C) Separated from the cake by dissolving solids or by burning it off (D) All 'a', 'b' & 'c'

Description : Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is (A) Added to the feed slurry (B) Pre ... the cake by dissolving solids or by burning it off (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

During the washing of cake (A) All the resistances are constant (B) Filter medium resistance increases (C) Filter medium resistance decreases (D) Cake resistance decreases

Description : During the washing of cake (A) All the resistances are constant (B) Filter medium resistance increases (C) Filter medium resistance decreases (D) Cake resistance decreases

Last Answer : (A) All the resistances are constant

Removal of activated carbon from glycerine is done by (A) Plate and frame filter (B) Rotary vacuum filter (C) Batch basket centrifuge (D) None of these

Description : Removal of activated carbon from glycerine is done by (A) Plate and frame filter (B) Rotary vacuum filter (C) Batch basket centrifuge (D) None of these

Last Answer : (A) Plate and frame filter

Which of the following is a vacuum filter? (A) Filter press (B) Rotary disc filter (C) Batch basket centrifuge (D) Tank filter (Nutsche filter)

Description : Which of the following is a vacuum filter? (A) Filter press (B) Rotary disc filter (C) Batch basket centrifuge (D) Tank filter (Nutsche filter)

Last Answer : (B) Rotary disc filter

. For laminar flow of filtrate through the cake deposited on septum, which of the following will be valid? (A) Kozeny-Carman equation (B) Leva's equation (C) Blake-Plummer equation (D) None of these

Description : . For laminar flow of filtrate through the cake deposited on septum, which of the following will be valid? (A) Kozeny-Carman equation (B) Leva's equation (C) Blake-Plummer equation (D) None of these

Last Answer : (A) Kozeny-Carman equation

Free flowing granular materials can be best dried in a __________ drier. (A) Rotary (B) Cylinder (C) Drum (D) Freeze

Description : Free flowing granular materials can be best dried in a __________ drier. (A) Rotary (B) Cylinder (C) Drum (D) Freeze

Last Answer : (A) Rotary

In washing type plate and frame filter press, the ratio of washing rate to the final filtrate rate is (A) 4 (B) 1/4 (C) 1 (D) 1/2

Description : In washing type plate and frame filter press, the ratio of washing rate to the final filtrate rate is (A) 4 (B) 1/4 (C) 1 (D) 1/2

Last Answer : (B) 1/4

Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity(C) Surface tension(D) Density

Description : Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity (C) Surface tension (D) Density

Last Answer : (D) Density

Bag filter design is predominantly dependent on gas temperature, as it affects the gas density & viscosity and the selection of filtering material. The pressure drop in a bag filter is (A) Inversely proportional to viscosity of gas (B) Proportional to the viscosity & density of the gas (C) Proportional to the pressure of the gas (D) Both (B) and (C)

Description : Bag filter design is predominantly dependent on gas temperature, as it affects the gas density & viscosity and the selection of filtering material. The pressure drop in a bag filter is (A) Inversely proportional to ... the gas (C) Proportional to the pressure of the gas (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Vacuum filter is most suitable for the (A) Removal of fines from liquid (B) Liquids having high vapour pressure (C) Liquids of very high viscosity (D) None of these

Description : Vacuum filter is most suitable for the (A) Removal of fines from liquid (B) Liquids having high vapour pressure (C) Liquids of very high viscosity (D) None of these

Last Answer : (D) None of these

In case of end to end connection of two or more pipes in series, the __________ each pipe.(A) Same rate of flow passes through (B) Head loss is same through (C) Rate of flow in each pipe is proportional to the length of (D) Total flow rate is the sum of flow rate in

Description : In case of end to end connection of two or more pipes in series, the __________ each pipe. (A) Same rate of flow passes through (B) Head loss is same through (C) Rate of flow in each pipe is proportional to the length of (D) Total flow rate is the sum of flow rate in

Last Answer : (A) Same rate of flow passes through

The force exerted by a moving fluid on an immersed body is directly proportional to the rate of change of momentum due to the presence of the body. This statement is called (A) Newton's law of motion (B) Newton's law of cooling (C) Newton's law of viscosity (D) Newton's law of resistance

Description : The force exerted by a moving fluid on an immersed body is directly proportional to the rate of change of momentum due to the presence of the body. This statement is called (A) Newton's law of motion (B) Newton's law of cooling (C) Newton's law of viscosity (D) Newton's law of resistance

Last Answer : Answer: Option D

A compressible cake has the (A) Maximum porosity at the upstream side (B) Maximum porosity at the filter medium (C) Same porosity throughout the cake thickness (D) None of these

Description : A compressible cake has the (A) Maximum porosity at the upstream side (B) Maximum porosity at the filter medium (C) Same porosity throughout the cake thickness (D) None of these

Last Answer : (A) Maximum porosity at the upstream side

The porosity of a compressible cake is(A) Minimum at the filter medium(B) Minimum at the upstream face(C) Maximum at the filter medium(D) Same throughout the thickness of cake

Description : The porosity of a compressible cake is (A) Minimum at the filter medium (B) Minimum at the upstream face (C) Maximum at the filter medium (D) Same throughout the thickness of cake

Last Answer : (A) Minimum at the filter medium

A Bingham fluid of viscosity μ = 10 Pa.s and yield stress, τ0 = 10 KPa, is shared between flat parallel plates separated by a distance of 10 -3 m. The top plate is moving with a velocity of 1 m/s. The shear stress on the plate is (A) 10 KPa (B) 20 KPa (C) 30 KPa (D) 40 KPa

Description : A Bingham fluid of viscosity μ = 10 Pa.s and yield stress, τ0 = 10 KPa, is shared between flat parallel plates separated by a distance of 10 -3 m. The top plate is moving with a velocity of 1 m/s. The shear stress on the plate is (A) 10 KPa (B) 20 KPa (C) 30 KPa (D) 40 KPa

Last Answer : (B) 20 KPa

Filter medium resistance is important during the __________ of filtration. (A) Early stages (B) Final stages (C) Entire process (D) None of these

Description : Filter medium resistance is important during the __________ of filtration. (A) Early stages (B) Final stages (C) Entire process (D) None of these

Last Answer : (A) Early stages

Calcium ammonium nitrate (a fertiliser) is dried in a __________ dryer. (A) Rotary (B) Vacuum (C) Tunnel (D) Tray

Description : Calcium ammonium nitrate (a fertiliser) is dried in a __________ dryer. (A) Rotary (B) Vacuum (C) Tunnel (D) Tray

Last Answer : (A) Rotary

Drying of refractory is normally carried out in a __________ dryer. (A) Open pan (B) Tray (C) Rotary vacuum (D) Truck/tunnel

Description : Drying of refractory is normally carried out in a __________ dryer. (A) Open pan (B) Tray (C) Rotary vacuum (D) Truck/tunnel

Last Answer : (D) Truck/tunnel

Large quantity of silica gel is normally dried in a __________ dryer. (A) Freeze (B) Through circulation (C) Rotary vacuum (D) Tray

Description : Large quantity of silica gel is normally dried in a __________ dryer. (A) Freeze (B) Through circulation (C) Rotary vacuum (D) Tray

Last Answer : (B) Through circulation

Large scale drying of wheat is done in a __________ dryer. (A) Fluidised bed (B) Spouted bed (C) Tray (D) Vacuum rotary

Description : Large scale drying of wheat is done in a __________ dryer. (A) Fluidised bed (B) Spouted bed (C) Tray (D) Vacuum rotary

Last Answer : (B) Spouted bed

A mono pump is a __________ pump. (A) Centrifugal (B) Piston (C) Positive acting rotary (D) A group of vacuum

Description : A mono pump is a __________ pump. (A) Centrifugal (B) Piston (C) Positive acting rotary (D) A group of vacuum

Last Answer : (C) Positive acting rotary

Rotary vacuum pumps can reduce the absolute pressure to as low as __________ mm Hg. (A) 1 (B) 0.1 (C) 0.01 (D) 0.001

Description : Rotary vacuum pumps can reduce the absolute pressure to as low as __________ mm Hg. (A) 1 (B) 0.1 (C) 0.01 (D) 0.001

Last Answer : (C) 0.01

To handle smaller quantity of fluid at higher discharge pressure, use a __________ pump. (A) Reciprocating (B) Centrifugal (C) Volute (D) Rotary vacuum

Description : To handle smaller quantity of fluid at higher discharge pressure, use a __________ pump. (A) Reciprocating (B) Centrifugal (C) Volute (D) Rotary vacuum

Last Answer : (A) Reciprocating

Moore filter is a __________ filter. (A) Leaf (B) Press (C) Rotary (D) Sand

Description : Moore filter is a __________ filter. (A) Leaf (B) Press (C) Rotary (D) Sand

Last Answer : (A) Leaf

According to Newton's law of viscosity, the shear stress on a layer of a fluid is __________ to the rate of shear strain. (A) Equal to (B) Directly proportional (C) Inversely proportional (D) None of these

Description : According to Newton's law of viscosity, the shear stress on a layer of a fluid is __________ to the rate of shear strain. (A) Equal to (B) Directly proportional (C) Inversely proportional (D) None of these

Last Answer : Answer: Option B