The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate(B) Pressure(C) Both (A) & (B)(D) Neither (A) nor (B

The cake resistance increases steadily with the time of filtration in a
plate and frame filter employing constant __________ filtration.
(A) Rate
(B) Pressure
(C) Both (A) & (B)
(D) Neither (A) nor (B
by

1 Answer

Answer :

(C) Both (A) & (B)
by

Related questions

Filtration capacity of a rotary drum vacuum filter depends upon the (A) Cake thickness (B) Characteristics of the feed slurry (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Filtration capacity of a rotary drum vacuum filter depends upon the (A) Cake thickness (B) Characteristics of the feed slurry (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Shell and leaf filter as compared to plate and frame filter (A) Entails less labor cost(B) Facilitates filtration under higher pressure(C) Provides more effective washing(D) All (A), (B) & (C)

Description : Shell and leaf filter as compared to plate and frame filter (A) Entails less labor cost (B) Facilitates filtration under higher pressure (C) Provides more effective washing (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Filtration rate through a filter cake is proportional to (where, S = filtering surface R = specific cake resistance μ = viscosity of the filtrate) (A) S (B) 1/R (C) 1/μ (D) All (A), (B) & (C)

Description : Filtration rate through a filter cake is proportional to (where, S = filtering surface R = specific cake resistance μ = viscosity of the filtrate) (A) S (B) 1/R (C) 1/μ (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Filtration of water in a paper mill is done by a/an __________ filter. (A) Open sand (B) Plate and frame (C) Vacuum leaf (D) Sparkler

Description : Filtration of water in a paper mill is done by a/an __________ filter. (A) Open sand (B) Plate and frame (C) Vacuum leaf (D) Sparkler

Last Answer : (A) Open sand

Pick out the wrong statement. (A) For the compressible cake, voidage & the specific resistance of the cake can be assumed to be constant (B) Cake resistance is independent of the pressure drop (C) Crushing of explosive materials are done by employing dry-grinding (D) Gyratory crusher is a coarse crusher

Description : Pick out the wrong statement. (A) For the compressible cake, voidage & the specific resistance of the cake can be assumed to be constant (B) Cake resistance is independent of the pressure ... Crushing of explosive materials are done by employing dry-grinding (D) Gyratory crusher is a coarse crusher

Last Answer : (B) Cake resistance is independent of the pressure drop

In case of a plate and frame filter press, filtrate flow through the cake follows __________ flow. (A) Plug (B) Turbulent (C) Laminar (D) None of these

Description : In case of a plate and frame filter press, filtrate flow through the cake follows __________ flow. (A) Plug (B) Turbulent (C) Laminar (D) None of these

Last Answer : (C) Laminar

Flow of filtrate through the cake in a plate and frame filter press is best described by the __________ equation. (A) Kozeny-Carman (B) Hagen-Poiseuille’s (C) Fanning's (D) Kremser

Description : Flow of filtrate through the cake in a plate and frame filter press is best described by the __________ equation. (A) Kozeny-Carman (B) Hagen-Poiseuille’s (C) Fanning's (D) Kremser

Last Answer : (A) Kozeny-Carman

Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is (A) Added to the feed slurry (B) Pre-coated on the filter medium prior to filtration (C) Separated from the cake by dissolving solids or by burning it off (D) All 'a', 'b' & 'c'

Description : Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is (A) Added to the feed slurry (B) Pre ... the cake by dissolving solids or by burning it off (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Filtration should be stopped in a filter press, if the (A) Cake becomes very dense (B) Liquor stops flowing out to the discharge (C) Filtration pressure rises suddenly (D) Both (B) & (C

Description : Filtration should be stopped in a filter press, if the (A) Cake becomes very dense (B) Liquor stops flowing out to the discharge (C) Filtration pressure rises suddenly (D) Both (B) & (C

Last Answer : (D) Both (B) & (C

Filter aid is used to (A) Increase the rate of filtration (B) Decrease the pressure drop (C) Increase the porosity of the cake (D) Act as a support base for the septum

Description : Filter aid is used to (A) Increase the rate of filtration (B) Decrease the pressure drop (C) Increase the porosity of the cake (D) Act as a support base for the septum

Last Answer : (C) Increase the porosity of the cake

. In filtration, the use of 'filter aid' helps in (A) Reducing the filtration pressure (B) Accelerating the rate of filtration (C) Deplugging the filter medium (D) Enhancing the cake porosity in case of a dense impermeable cake

Description : . In filtration, the use of 'filter aid' helps in (A) Reducing the filtration pressure (B) Accelerating the rate of filtration (C) Deplugging the filter medium (D) Enhancing the cake porosity in case of a dense impermeable cake

Last Answer : (C) Deplugging the filter medium

Filtration rate does not depend upon the (A) Pressure drop & area of filtering surface (B) Resistance of the cake & the septum (C) Properties of the cake & the filtrate (D) None of these

Description : Filtration rate does not depend upon the (A) Pressure drop & area of filtering surface (B) Resistance of the cake & the septum (C) Properties of the cake & the filtrate (D) None of these

Last Answer : (D) None of these

In a trickling filter A. Filtration process is used B. Biological action is used C. Neither A. nor B. D. Both A. and B.

Description : In a trickling filter A. Filtration process is used B. Biological action is used C. Neither A. nor B. D. Both A. and B.

Last Answer : ANS: B

During filtration operation, the filtrate encounters the resistance of the (A) Filter medium (B) Cake (C) Channel carrying the slurry to the upstream side of the cake and filtrate away from the filter medium (D) All (A), (B) and (C)

Description : During filtration operation, the filtrate encounters the resistance of the (A) Filter medium (B) Cake (C) Channel carrying the slurry to the upstream side of the cake and filtrate away from the filter medium (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

. In constant pressure filtration, (A) Resistance decreases with time (B) Rate of filtration is constant(C) Rate of filtration increases with time(D) Rate of filtration decreases with time

Description : . In constant pressure filtration, (A) Resistance decreases with time (B) Rate of filtration is constant (C) Rate of filtration increases with time (D) Rate of filtration decreases with time

Last Answer : (D) Rate of filtration decreases with time

During the washing of cake (A) All the resistances are constant (B) Filter medium resistance increases (C) Filter medium resistance decreases (D) Cake resistance decreases

Description : During the washing of cake (A) All the resistances are constant (B) Filter medium resistance increases (C) Filter medium resistance decreases (D) Cake resistance decreases

Last Answer : (A) All the resistances are constant

Addition of filter aid to the slurry before filtration is done to __________ of the cake. (A) Increase the porosity (B) Increase the compressibility co-efficient (C) Decrease the porosity (D) Decrease the compressibility co-efficient

Description : Addition of filter aid to the slurry before filtration is done to __________ of the cake. (A) Increase the porosity (B) Increase the compressibility co-efficient (C) Decrease the porosity (D) Decrease the compressibility co-efficient

Last Answer : (A) Increase the porosity

For removal of very small amounts of precipitate from large volume of water, the most suitable filter is the __________ filter. (A) Plate & frame (B) Shell & lea(C) Sand(D) Rotary vacuum

Description : For removal of very small amounts of precipitate from large volume of water, the most suitable filter is the __________ filter. (A) Plate & frame (B) Shell & lea (C) Sand (D) Rotary vacuum

Last Answer : (C) Sand

The most suitable filter for the removal of very small amount of precipitate from very large volumes of water is the __________ filter. (A) Vacuum (B) Sand (C) Plate & frame (D) Rotary

Description : The most suitable filter for the removal of very small amount of precipitate from very large volumes of water is the __________ filter. (A) Vacuum (B) Sand (C) Plate & frame (D) Rotary

Last Answer : (B) Sand

__________ is used for producing a thick suspension from a thin slurry. (A) Cartridge filter (B) Rotary drum vacuum filter (C) Pressure filter thickener (D) Plate and frame filter press

Description : __________ is used for producing a thick suspension from a thin slurry. (A) Cartridge filter (B) Rotary drum vacuum filter (C) Pressure filter thickener (D) Plate and frame filter press

Last Answer : (C) Pressure filter thickener

During washing of filter at the end of constant pressure filtration, the rate of washing equals the rate of filtration (A) At time zero (B) At the end of filtration

Description : During washing of filter at the end of constant pressure filtration, the rate of washing equals the rate of filtration (A) At time zero (B) At the end of filtration

Last Answer : (B) At the end of filtration

The ratio of Murphree plate efficiency to point efficiency is always > 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The ratio of Murphree plate efficiency to point efficiency is always > 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Plug

The ratio of Murphree plate efficiency to point efficiency is 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The ratio of Murphree plate efficiency to point efficiency is 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Perfectly mixed

After a projectile is fired horizontally near the earth's surface, the horizontal component of its velocity, neglecting any air resistance: w) increases steadily x) decreases steadily y) first decreases, then increases z) remains constant

Description : After a projectile is fired horizontally near the earth's surface, the horizontal component of its velocity, neglecting any air resistance: w) increases steadily x) decreases steadily y) first decreases, then increases z) remains constant

Last Answer : ANSWER: Z -- REMAINS CONSTANT 

. A Rotameter works on the principle of __________ pressure drop. (A) Constant(B) Variable(C) Both (A) & (B)(D) Neither (A) nor (B)

Description : . A Rotameter works on the principle of __________ pressure drop. (A) Constant (B) Variable (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Constant

Filtrate flow rate in case of a rotary drum vacuum filter (in which Rm < < Rc ) is proportional to __________ and the cycle time (where, μ = filtrate viscosity Rm = filter medium resistance Rc = cake resistance). (A) √μ (B) 1/√μ (C) 1/μ (D) 1/μ

Description : Filtrate flow rate in case of a rotary drum vacuum filter (in which Rm < < Rc ) is proportional to __________ and the cycle time (where, μ = filtrate viscosity Rm = filter medium resistance Rc = cake resistance). (A) √μ (B) 1/√μ (C) 1/μ (D) 1/μ

Last Answer : (B) 1/√μ

For classification of potable (drinking) water, we use a __________ filter. (A) Gravity sand (B) Plate and frame (C) Vacuum leaf (D) Rotary vacuum

Description : For classification of potable (drinking) water, we use a __________ filter. (A) Gravity sand (B) Plate and frame (C) Vacuum leaf (D) Rotary vacuum

Last Answer : (A) Gravity sand

For separation of sugar solution from settled out mud, we use a __________ filter. (A) Sparkler (B) Plate and frame (C) Centrifugal (D) Rotary drum vacuum

Description : For separation of sugar solution from settled out mud, we use a __________ filter. (A) Sparkler (B) Plate and frame (C) Centrifugal (D) Rotary drum vacuum

Last Answer : (C) Centrifugal

Gelatinous solid (which plug the septum) can be filtered by a __________ filter. (A) Sparkler (B) Plate and frame (C) Vacuum leaf (D) Pre-coat

Description : Gelatinous solid (which plug the septum) can be filtered by a __________ filter. (A) Sparkler (B) Plate and frame (C) Vacuum leaf (D) Pre-coat

Last Answer : (D) Pre-coat

Introduction of slurry in a plate and frame filter press is done through a plate in each frame. The plate of this filter has a __________ surface. (A) Plane (B) Curved (C) Ribbed (D) Either (A) or (B)

Description : Introduction of slurry in a plate and frame filter press is done through a plate in each frame. The plate of this filter has a __________ surface. (A) Plane (B) Curved (C) Ribbed (D) Either (A) or (B)

Last Answer : (C) Ribbed

For __________ drying, the effects of velocity, temperature and humidity of the gas and the thickness of the solid are the same. (A) Unsaturated surface (B) Constant rate (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : For __________ drying, the effects of velocity, temperature and humidity of the gas and the thickness of the solid are the same. (A) Unsaturated surface (B) Constant rate (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

In washing type plate and frame filter press, the ratio of washing rate to the final filtrate rate is (A) 4 (B) 1/4 (C) 1 (D) 1/2

Description : In washing type plate and frame filter press, the ratio of washing rate to the final filtrate rate is (A) 4 (B) 1/4 (C) 1 (D) 1/2

Last Answer : (B) 1/4

__________ increases with increase in pressure. (A) The melting point of wax (B) The boiling point of a liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : __________ increases with increase in pressure. (A) The melting point of wax (B) The boiling point of a liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Cake resistance is (A) Important in the beginning of filtration (B) Decreased with the time of filtration (C) Independent of pressure drop (D) None of these

Description : Cake resistance is (A) Important in the beginning of filtration (B) Decreased with the time of filtration (C) Independent of pressure drop (D) None of these

Last Answer : (D) None of these

With increase in drum speed, in a rotary drum filter, the filtration rate (A) Increases(B) Increases linearly(C) Decreases(D) Is not affected

Description : With increase in drum speed, in a rotary drum filter, the filtration rate (A) Increases (B) Increases linearly (C) Decreases (D) Is not affected

Last Answer : (A) Increases

In case of constant underflow extraction operation, the __________ atall solute concentration.(A) Solids are drained to the same extent(B) Ratio of the insoluble to solution is constant(C) Both (A) & (B)(D) Neither (A) nor (B)

Description : In case of constant underflow extraction operation, the __________ atall solute concentration. (A) Solids are drained to the same extent (B) Ratio of the insoluble to solution is constant (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

With increase in temperature, the equilibrium __________ rises in case of endothermic reaction. (A) Constant (B) Conversion (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : With increase in temperature, the equilibrium __________ rises in case of endothermic reaction. (A) Constant (B) Conversion (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Conversion

For a constant volume process __________ by the system is used only to increase the internal energy. (A) Heat absorbed (B) Work done (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : For a constant volume process __________ by the system is used only to increase the internal energy. (A) Heat absorbed (B) Work done (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Work done

The inlet pressure in a constant rate filtration (A) Increases continuously (B) Decreases gradually (C) Remains constant (D) None of these

Description : The inlet pressure in a constant rate filtration (A) Increases continuously (B) Decreases gradually (C) Remains constant (D) None of these

Last Answer : (A) Increases continuously

The filtrate flow rate in constant pressure filtration (A) Continuously increases (B) Continuously decreases (C) Remain constant throughout (D) May increase or decrease; depends on the pressure

Description : The filtrate flow rate in constant pressure filtration (A) Continuously increases (B) Continuously decreases (C) Remain constant throughout (D) May increase or decrease; depends on the pressure

Last Answer : (B) Continuously decreases

Gaseous diffusion co-efficient increases with increase in the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Gaseous diffusion co-efficient increases with increase in the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Temperature

With diminishing cross-sectional area in case of subsonic flow in a converging nozzle, the (A) Velocity increases (B) Pressure decreases (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : With diminishing cross-sectional area in case of subsonic flow in a converging nozzle, the (A) Velocity increases (B) Pressure decreases (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

In the desorption of highly soluble gas from the liquid, the main resistance will be in the __________ phase. (A) Gas (B) Liquid (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In the desorption of highly soluble gas from the liquid, the main resistance will be in the __________ phase. (A) Gas (B) Liquid (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Liquid

In the absorption of ammonia in water, the main resistance to absorption is by the __________ phase. (A) Liquid (B) Gas (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In the absorption of ammonia in water, the main resistance to absorption is by the __________ phase. (A) Liquid (B) Gas (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Gas

Filter medium resistance is important during the __________ of filtration. (A) Early stages (B) Final stages (C) Entire process (D) None of these

Description : Filter medium resistance is important during the __________ of filtration. (A) Early stages (B) Final stages (C) Entire process (D) None of these

Last Answer : (A) Early stages

High magnesia lime is added to hot sugar cane juice (during the manufacture of sugar) to (A) Flocculate the impurities(B) Facilitate fast filtration(C) Both (A) and (B)(D) Neither (A) nor (B)

Description : High magnesia lime is added to hot sugar cane juice (during the manufacture of sugar) to (A) Flocculate the impurities (B) Facilitate fast filtration (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

In a packed tower, the value of HETP equals HTUOG, when the equilibrium and the operating lines are (where, HETP = height equivalent to a theoretical plate HTUOG = overall gas phase height of a transfer unit). (A) Straight (B) Parallel (C) Both (A) & (B) (D) Neither (A) nor (B

Description : In a packed tower, the value of HETP equals HTUOG, when the equilibrium and the operating lines are (where, HETP = height equivalent to a theoretical plate HTUOG = overall gas phase height of a transfer unit). (A) Straight (B) Parallel (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

If the overall efficiency and Murphree plate efficiency are equal, then both the equilibrium and operating lines are: (A) Straight (B) Parallel (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : If the overall efficiency and Murphree plate efficiency are equal, then both the equilibrium and operating lines are: (A) Straight (B) Parallel (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Mass velocity in case of steady flow and through a constant cross￾section conduit is independent of the (A) Temperature (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Mass velocity in case of steady flow and through a constant cross￾section conduit is independent of the (A) Temperature (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)