Primary purpose of a __________ nuclear reactor is to supply a high
neutron flux of the order of 10
13
to 10
14neutrons/cm2 second.
(A) Research
(B) Power
(C) Breeder
(D) Homogeneous

1 Answer

Answer :

(A) Research

Related questions

Description : Which of the following reactors is operated at high neutron flux and low power level? (A) Breeder reactor (B) Research reactor (C) Heterogeneous reactor (D) Liquid metal (e.g., molten sodium) cooled reactor

Last Answer : (B) Research reactor

Description : Research reactors are normally meant for (A) Producing high neutron flux 10 12 -10 13 neutrons/cm2 , sec and studying the effect of neutron bombardment on different materials (B) Accelerating the neutrons (C) Power generation (D) None of these

Last Answer : (A) Producing high neutron flux 10 12 -10 13 neutrons/cm2 , sec and studying the effect of neutron bombardment on different materials

Description : Candu reactor is a __________ nuclear reactor. (A) Natural uranium fuelled heavy water cooled & moderated (B) Highly enriched uranium (85% U-235) fuelled (C) Homogeneous (D) Fast breeder

Last Answer : (A) Natural uranium fuelled heavy water cooled & moderated

Description : Liquid metal (e.g., molten sodium) is preferred as a coolant in case of a/an __________ reactor. (A) Homogeneous (B) Graphite moderated (C) Fast breeder (D) Enriched uranium (3% U-235) fuelled

Last Answer : (C) Fast breeder

Description : Nuclear power reactor located at Tarapur is of __________ type. (A) Fast breeder (B) Pressurised water (C) Boiling water (D) Gas cooled

Last Answer : (C) Boiling water

Description : Molten sodium is used as a coolant in a fast breeder reactor, because of its (A) Excellent moderating properties (B) Neutron breeding capability (C) Faster heat removal capability from the core (D) Capability to increase the reaction rate in the core

Last Answer : (C) Faster heat removal capability from the core

Description : Which of the following may not need a moderator? (A) Candu reactor (B) Fast breeder reactor (C) Homogeneous reactor (D) Pressurised water reactor

Last Answer : (B) Fast breeder reactor

Description : India's first fast breeder neutron reactor was?

Last Answer : Kamini

Description : In a breeder reactor, new fuel is formed as non-fuel uranium-238 absorbs a neutron and ultimately becomes which of the following fissionable atoms: w) uranium-235 x) plutonium-239 y) uranium-239 z) neptunium-239

Last Answer : ANSWER: X -- PLUTONIUM-239

Description : Thorium-232 is converted into uranium-233 in a/an __________ nuclear reactor. (A) Thermal (B) Fast breeder (C) Heavy water moderated (D) Enriched uranium

Last Answer : (B) Fast breeder

Description : If a nuclear reactor produces more fissile nuclear fuel than it consumes, then it is called a __________ reactor. (A) Critical (B) Breeder (C) Fertile (D) Heterogeneous

Last Answer : (B) Breeder

Description : __________ gas is normally not used as a coolant in a nuclear reactor, because of its high neutron capture cross-section. (A) Nitrogen (B) Hydrogen (C) Helium (D) Carbon dioxide

Last Answer : (A) Nitrogen

Description : A thermal nuclear reactor compared to a fast breeder reactor (A) Uses slower neutrons for fission (B) Uses faster neutrons for fission (C) Gives higher power density (D) Requires less fuel to run at the same power level

Last Answer : (A) Uses slower neutrons for fission

Description : In which of the electric power generation system, the operating cost is minimum? (A) Thermal (B) Nuclear (C) Hydroelectric (D) Fast breeder reactor

Last Answer : (C) Hydroelectric

Description : Pressure of CO2 gas (which is a coolant) in the Calder-Hall nuclear reactor is __________ kgf/cm2 . (A) 0.2 (B) 7 (C) 35 (D) 50

Last Answer : (B) 7

Description : In a homogeneous nuclear reactor, the __________ are mixed together. (A) Fuel & coolant (B) Fuel & moderator (C) Coolant & moderator (D) None of these

Last Answer : (B) Fuel & moderator

Description : Fuel for a fast breeder nuclear reactor is (A) Plutonium (B) Uranium (C) Radium (D) Neptunium

Last Answer : (A) Plutonium

Description : Which of the following gases has very high neutron capture cross￾section, making it unsuitable as a coolant in nuclear reactor? (A) N2 (B) He (C) CO2 (D) H2

Last Answer : (A) N2

Description : The effectiveness factor for large value of Thiele modulus [L√(K/D1 )] of a solid catalysed first order reaction is equal to (where, L = length of the reactor, cm, D1 = diffusion co-efficient, cm2 /second). (A) L √(K/D1 ) (B) 1/[L√(K/D1 )] (C) 1 (D) ∞

Last Answer : (B) 1/[L√(K/D1 )]

Description : Name the chemical element that is eleventh in the Lanthanide Series in the periodic table. Because of the metal's high thermal-neutron-absorption cross section, it has been of much interest in terms of use in nuclear reactor hardware. The chemical symbol for this element is Er.

Last Answer : ANSWER: ERBIUM

Description : Heavy water (D2O) in a nuclear reactor serves as a (A) Coolant (B) Moderator (C) Both (A) & (B) (D) Neutron absorber

Last Answer : (C) Both (A) & (B)

Description : A nuclear reactor can't be used for (A) The production of radioisotopes (B) Supplying intense fields or beams of neutron for scientific experiments (C) Marine ship propulsion (D) None of these

Last Answer : (D) None of these

Description : Graphite is used in nuclear reactor as (A) Insulation lining of the reactor (B) Fuel (C) Lubricant (D) Retarder of neutron velocity

Last Answer : (D) Retarder of neutron velocity

Description : A homogeneous reactor is the one, in which the (A) Fissile atoms are evenly distributed throughout the mass of nuclear reactor (B) Same substance (e.g. heavy water) is used as moderator & coolant (C) The fuel and the moderator is mixed to form a homogeneous material (D) All (A), (B) and (C)

Last Answer : (C) The fuel and the moderator is mixed to form a homogeneous material

Description : __________ moderator is used in a fast breeder reactor. (A) Graphite (B) Heavy water (C) Beryllium (D) No

Last Answer : (D) No

Description : Thorium can be converted into U-233 in a __________ reactor. (A) Liquid metal cooled (B) Fast breeder (C) Thermal (D) Swimming pool

Last Answer : (B) Fast breeder

Description : Critical energy should be __________ the neutron binding energy of the atom in order to initiate a nuclear fission. (A) Equal to (B) Less than (C) More than (D) Either more or less

Last Answer : (C) More than

Description : Liquid diffusivity is of the order of __________ cm2 /second. (A) 0.01 (B) 0.1 (C) 10 -5 to 10 -6 (D) > 1

Last Answer : (C) 10 -5 to 10

Description : Gaseous diffusivity at atmospheric pressure is of the order of __________ cm2 /second. (A) 1 (B) 1 to 5 (C) 5 to 10 (D) > 10

Last Answer : (A) 1

Description : Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Last Answer : (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water

Description : Secondary cooling circuit is a must in molten sodium cooled fast breeder reactor for (A) Achieving high degree of superheat in the steam (B) Faster heat removal rate from the core (C) ... circulation pressure (D) Avoiding the mixing of water with radioactive sodium, as it may cause explosion

Last Answer : (D) Avoiding the mixing of water with radioactive sodium, as it may cause explosion

Description : Fast breeder nuclear reactors using enriched uranium as fuel may contain upto a maximum of __________ percent of U-235 (i.e. fissile material). (A) 15 (B) 45 (C) 65 (D) 85

Last Answer : (D) 85

Description : Vegetable oils are hydrogenated in a __________ reactor. (A) Slurry (B) Plug flow (C) Homogeneous catalytic (D) None of these

Last Answer : (A) Slurry

Description : The main purpose of control rod in a nuclear reactor is to control the (A) Chain reaction and hence the power output by regulating the number of secondary neutrons causing fission (B) ... radiation (C) Conversion of fissile material into fertile material (D) Velocity of the secondary neutrons

Last Answer : (A) Chain reaction and hence the power output by regulating the number of secondary neutrons causing fission

Description : Fuel for a fast breeder reactor is (A) Plutonium (B) Uranium (C) Radium (D) Neptunium

Last Answer : (A) Plutonium

Description : Fast breeder Test Reactor (FBTR) is located at (A) Kalpakkam (near Madras) (B) Kota (in Rajasthan) (C) BARC (Trombay) (D) Tarapur (in Maharashtra)

Last Answer : (A) Kalpakkam (near Madras)

Description : A fast breeder reactor (A) Utilises fast neutrons for causing fission (B) Converts fertile material (e.g., U-238) into fissile material (Pu-239) (C) Normally employs molten sodium as coolant (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : Fast breeder test reactor at Kalpakkam (INDIA) is designed for using (A) Thorium as a fertile material (B) U-238 as a fertile material (C) Helium as a coolant (D) Uranium ore directly as a fuel

Last Answer : (A) Thorium as a fertile material

Description : A fast breeder reactor (A) Uses natural uranium as fuel (B) Does not require a moderator (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) Does not require a moderator

Description : A fast breeder reactor employs (A) Graphite as moderator (B) Water as coolant (C) Molten sodium as coolant as well as moderator (D) U-235 as fuel

Last Answer : (D) U-235 as fuel

Description : Coolant used in a fast breeder reactor is (A) Molten sodium (B) Heavy water (C) Ordinary water (D) Helium

Last Answer : (A) Molten sodium

Description : Use of molten metal as a coolant in fast breeder reactor helps in (A) Rapid heat transfer from the core (B) Accelerating the reaction rate in the core (C) Breeding neutrons (D) Accelerating the neutrons

Last Answer : (A) Rapid heat transfer from the core

Description : Which of the following has the lowest Prandtl number? (A) Molten sodium (a coolant used in fast breeder reactor) (B) Water (C) Transformer oil (D) Dilute H2SO4

Last Answer : (A) Molten sodium (a coolant used in fast breeder reactor)

Description : Centrifugal pump can't be used to pump (A) Molten sodium (used as a coolant in Fast Breeder Reactor) (B) Moderately viscous vegetable oil used in soap industry (C) Thick molten soap at 80°C (D) None of the above

Last Answer : (C) Thick molten soap at 80°C

Description : Corona discharge is related to the operation of a/an (A) Induction motor (B) Electrostatic precipitator (C) Fast breeder reactor (D) Magneto hydrodynamic generator (MHD)

Last Answer : Option B

Description : Most of the nuclear power plants operating in the United States are: w) pressurized water reactors x) boiling water reactors y) high-temperature gas-cooled reactors z) liquid-metal fast breeder reactors

Last Answer : ANSWER: W -- PRESSURIZED WATER REACTORS 

Description : Pressure maintained in the high pressure primary tower of a three stage crude oil distillation system is about __________ kg/cm2 . (A) 1.5 (B) 3 (C) 6 (D) 12

Last Answer : (B) 3

Description : Biological shield is provided in a nuclear power reactor to protect the __________ from radiation damage. (A) Fuel elements (B) Operating personnels (C) Walls of the reactor (D) None of these

Last Answer : (B) Operating personnels

Description : Biological shield is provided in a nuclear power reactor to protect the __________ from radiation damage. (A) Fuel elements (B) Operating personnels (C) Walls of the reactor (D) None of these

Last Answer : (B) Operating personnels

Description : What is big advantage of fast breeder reactor ?

Last Answer : It has rapid self breeding of fissile fuel during the operation of the reactor, and thus, it offers about sixty times the output with same natural uranium resources through ordinary non-breeder nuclear reactor.