Secondary cooling circuit is a must in molten sodium cooled fast breeder reactor for (A) Achieving high degree of superheat in the steam (B) Faster heat removal rate from the core(C) Lowering the coolant circulation pressure(D) Avoiding the mixing of water with radioactive sodium, as it may causeexplosion

Secondary cooling circuit is a must in molten sodium cooled fast
breeder reactor for
(A) Achieving high degree of superheat in the steam
(B) Faster heat removal rate from the core
(C) Lowering the coolant circulation pressure
(D) Avoiding the mixing of water with radioactive sodium, as it may cause
explosion
by

1 Answer

Answer :

(D) Avoiding the mixing of water with radioactive sodium, as it may cause
explosion
by

Related questions

Molten sodium is used as a coolant in a fast breeder reactor, because of its (A) Excellent moderating properties (B) Neutron breeding capability (C) Faster heat removal capability from the core (D) Capability to increase the reaction rate in the core

Description : Molten sodium is used as a coolant in a fast breeder reactor, because of its (A) Excellent moderating properties (B) Neutron breeding capability (C) Faster heat removal capability from the core (D) Capability to increase the reaction rate in the core

Last Answer : (C) Faster heat removal capability from the core

Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Description : Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Last Answer : (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water

Use of molten metal as a coolant in fast breeder reactor helps in (A) Rapid heat transfer from the core (B) Accelerating the reaction rate in the core (C) Breeding neutrons (D) Accelerating the neutrons

Description : Use of molten metal as a coolant in fast breeder reactor helps in (A) Rapid heat transfer from the core (B) Accelerating the reaction rate in the core (C) Breeding neutrons (D) Accelerating the neutrons

Last Answer : (A) Rapid heat transfer from the core

A fast breeder reactor employs (A) Graphite as moderator (B) Water as coolant (C) Molten sodium as coolant as well as moderator (D) U-235 as fuel

Description : A fast breeder reactor employs (A) Graphite as moderator (B) Water as coolant (C) Molten sodium as coolant as well as moderator (D) U-235 as fuel

Last Answer : (D) U-235 as fuel

Coolant used in a fast breeder reactor is (A) Molten sodium (B) Heavy water (C) Ordinary water (D) Helium

Description : Coolant used in a fast breeder reactor is (A) Molten sodium (B) Heavy water (C) Ordinary water (D) Helium

Last Answer : (A) Molten sodium

Which of the following has the lowest Prandtl number? (A) Molten sodium (a coolant used in fast breeder reactor) (B) Water (C) Transformer oil (D) Dilute H2SO4

Description : Which of the following has the lowest Prandtl number? (A) Molten sodium (a coolant used in fast breeder reactor) (B) Water (C) Transformer oil (D) Dilute H2SO4

Last Answer : (A) Molten sodium (a coolant used in fast breeder reactor)

A fast breeder reactor (A) Utilises fast neutrons for causing fission (B) Converts fertile material (e.g., U-238) into fissile material (Pu-239) (C) Normally employs molten sodium as coolant (D) All (A), (B) and (C)

Description : A fast breeder reactor (A) Utilises fast neutrons for causing fission (B) Converts fertile material (e.g., U-238) into fissile material (Pu-239) (C) Normally employs molten sodium as coolant (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Liquid metal (e.g., molten sodium) is preferred as a coolant in case of a/an __________ reactor. (A) Homogeneous (B) Graphite moderated (C) Fast breeder (D) Enriched uranium (3% U-235) fuelled

Description : Liquid metal (e.g., molten sodium) is preferred as a coolant in case of a/an __________ reactor. (A) Homogeneous (B) Graphite moderated (C) Fast breeder (D) Enriched uranium (3% U-235) fuelled

Last Answer : (C) Fast breeder

Centrifugal pump can't be used to pump (A) Molten sodium (used as a coolant in Fast Breeder Reactor) (B) Moderately viscous vegetable oil used in soap industry (C) Thick molten soap at 80°C (D) None of the above

Description : Centrifugal pump can't be used to pump (A) Molten sodium (used as a coolant in Fast Breeder Reactor) (B) Moderately viscous vegetable oil used in soap industry (C) Thick molten soap at 80°C (D) None of the above

Last Answer : (C) Thick molten soap at 80°C

Which of the following reactors is operated at high neutron flux and low power level? (A) Breeder reactor (B) Research reactor (C) Heterogeneous reactor (D) Liquid metal (e.g., molten sodium) cooled reactor

Description : Which of the following reactors is operated at high neutron flux and low power level? (A) Breeder reactor (B) Research reactor (C) Heterogeneous reactor (D) Liquid metal (e.g., molten sodium) cooled reactor

Last Answer : (B) Research reactor

The type of pump used for the recirculation of molten sodium coolant in liquid metal cooled reactor is a/an __________ pump. (A) Electromagnetic (B) Reciprocating (C) Centrifugal (D) Volute

Description : The type of pump used for the recirculation of molten sodium coolant in liquid metal cooled reactor is a/an __________ pump. (A) Electromagnetic (B) Reciprocating (C) Centrifugal (D) Volute

Last Answer : (A) Electromagnetic

_________ nuclear reactor does not require a heat exchanger tosupply steam to power turbine.(A) Molten sodium cooled(B) Helium cooled(C) Boiling water(D) Pressurised water

Description : _________ nuclear reactor does not require a heat exchanger tosupply steam to power turbine. (A) Molten sodium cooled (B) Helium cooled (C) Boiling water (D) Pressurised water

Last Answer : (C) Boiling water

Fast breeder reactors do not (A) Use Th-232 as fissile fuel (B) Convert fertile material to fissile material (C) Use fast neutrons for fission (D) Use molten sodium as coolant

Description : Fast breeder reactors do not (A) Use Th-232 as fissile fuel (B) Convert fertile material to fissile material (C) Use fast neutrons for fission (D) Use molten sodium as coolant

Last Answer : (A) Use Th-232 as fissile fuel

Coolant present in the primary circuit of a pressurised water reactor is high pressure (A) Sub cooled water (B) Saturated water (C) Superheated steam (D) Saturated steam

Description : Coolant present in the primary circuit of a pressurised water reactor is high pressure (A) Sub cooled water (B) Saturated water (C) Superheated steam (D) Saturated steam

Last Answer : (B) Saturated wate

Which of the following types of nuclear reactors is most prone to radioactive hazards? (A) Pressurised water reactor (B) Gas cooled reactor (C) Molten sodium cooled reactor (D) Boiling water reactor

Description : Which of the following types of nuclear reactors is most prone to radioactive hazards? (A) Pressurised water reactor (B) Gas cooled reactor (C) Molten sodium cooled reactor (D) Boiling water reactor

Last Answer : (D) Boiling water reactor

Pressure in a Pressurised Water Reactor (PWR) is used for (A) Maintaining constant pressure in the primary cooling circuit under varying loads (B) Superheating the steam (C) Pressurising the water in the primary coolant circuit (D) None of these

Description : Pressure in a Pressurised Water Reactor (PWR) is used for (A) Maintaining constant pressure in the primary cooling circuit under varying loads (B) Superheating the steam (C) Pressurising the water in the primary coolant circuit (D) None of these

Last Answer : (A) Maintaining constant pressure in the primary cooling circuit under varying loads

Which of the following nuclear reactors is the most efficient thermodynamically while operating between the same temperature and pressure limits of the reactor? (A) Molten sodium cooled (B) CO2 gas cooled (C) Pressurised water (D) Boiling water

Description : Which of the following nuclear reactors is the most efficient thermodynamically while operating between the same temperature and pressure limits of the reactor? (A) Molten sodium cooled (B) CO2 gas cooled (C) Pressurised water (D) Boiling water

Last Answer : (D) Boiling water

Fast breeder test reactor at Kalpakkam (INDIA) is designed for using (A) Thorium as a fertile material (B) U-238 as a fertile material (C) Helium as a coolant (D) Uranium ore directly as a fuel

Description : Fast breeder test reactor at Kalpakkam (INDIA) is designed for using (A) Thorium as a fertile material (B) U-238 as a fertile material (C) Helium as a coolant (D) Uranium ore directly as a fuel

Last Answer : (A) Thorium as a fertile material

Nuclear power reactor located at Tarapur is of __________ type. (A) Fast breeder (B) Pressurised water (C) Boiling water (D) Gas cooled

Description : Nuclear power reactor located at Tarapur is of __________ type. (A) Fast breeder (B) Pressurised water (C) Boiling water (D) Gas cooled

Last Answer : (C) Boiling water

Candu reactor is a __________ nuclear reactor. (A) Natural uranium fuelled heavy water cooled & moderated (B) Highly enriched uranium (85% U-235) fuelled (C) Homogeneous (D) Fast breeder

Description : Candu reactor is a __________ nuclear reactor. (A) Natural uranium fuelled heavy water cooled & moderated (B) Highly enriched uranium (85% U-235) fuelled (C) Homogeneous (D) Fast breeder

Last Answer : (A) Natural uranium fuelled heavy water cooled & moderated

Thorium can be converted into U-233 in a __________ reactor. (A) Liquid metal cooled (B) Fast breeder (C) Thermal (D) Swimming pool

Description : Thorium can be converted into U-233 in a __________ reactor. (A) Liquid metal cooled (B) Fast breeder (C) Thermal (D) Swimming pool

Last Answer : (B) Fast breeder

Heavy water is used as a moderator in a (A) Pressurised water reactor (PWR) (B) Boiling water reactor (BWR) (C) Candu reactor (D) Molten sodium cooled reactor

Description : Heavy water is used as a moderator in a (A) Pressurised water reactor (PWR) (B) Boiling water reactor (BWR) (C) Candu reactor (D) Molten sodium cooled reactor

Last Answer : (C) Candu reactor

A boiling water reactor is the one, in which the (A) Coolant water is allowed to boil in the core of the reactor (B) Coolant water, after being heated in the reactor core, generates steam in a boiler (C) Pressurised water is pumped into the core (D) Fuel and the coolant are thoroughly mixed to form a homogeneous solution

Description : A boiling water reactor is the one, in which the (A) Coolant water is allowed to boil in the core of the reactor (B) Coolant water, after being heated in the reactor core, generates steam ... water is pumped into the core (D) Fuel and the coolant are thoroughly mixed to form a homogeneous solution

Last Answer : (A) Coolant water is allowed to boil in the core of the reactor

A thermal nuclear reactor compared to a fast breeder reactor (A) Uses slower neutrons for fission (B) Uses faster neutrons for fission (C) Gives higher power density (D) Requires less fuel to run at the same power level

Description : A thermal nuclear reactor compared to a fast breeder reactor (A) Uses slower neutrons for fission (B) Uses faster neutrons for fission (C) Gives higher power density (D) Requires less fuel to run at the same power level

Last Answer : (A) Uses slower neutrons for fission

In a gas-liquid shell and tube heat exchanger, the(A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure gases are corrosive in nature (C) Gases to be heated/cooled is normally routed through the shell side, because the corrosion caused by the cooling water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Description : In a gas-liquid shell and tube heat exchanger, the (A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure ... water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Thermal shield is used in high powered nuclear reactors to (A) Protect the walls of the reactor from radiation damageB) Absorb the fast neutrons(C) Slow down the secondary neutrons(D) Protect the fuel element from coming in contact with the coolant

Description : Thermal shield is used in high powered nuclear reactors to (A) Protect the walls of the reactor from radiation damage B) Absorb the fast neutrons (C) Slow down the secondary neutrons (D) Protect the fuel element from coming in contact with the coolant

Last Answer : (A) Protect the walls of the reactor from radiation damage

In a high-temperature gas-cooled reactor, what gas ma be used for a coolant?

Description : In a high-temperature gas-cooled reactor, what gas ma be used for a coolant?

Last Answer : ANSWER: HELIUM or CARBON DIOXIDE

Water hammer is caused in steam carrying pipelines, because of (A) Partial condensation of steam (B) Vibration of the pipeline (C) High degree of superheat of steam (D) Its exposure to torrential rain

Description : Water hammer is caused in steam carrying pipelines, because of (A) Partial condensation of steam (B) Vibration of the pipeline (C) High degree of superheat of steam (D) Its exposure to torrential rain

Last Answer : (A) Partial condensation of steam

Pump used for the transportation of molten sodium in a fast breader reactor is a/an __________ pump. (A) Reciprocating (B) Plunger (C) Electromagnetic (D) Gear

Description : Pump used for the transportation of molten sodium in a fast breader reactor is a/an __________ pump. (A) Reciprocating (B) Plunger (C) Electromagnetic (D) Gear

Last Answer : (C) Electromagnetic

One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Description : One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Last Answer : (B) Evaporate the water

Which of the following may not need a moderator? (A) Candu reactor (B) Fast breeder reactor (C) Homogeneous reactor (D) Pressurised water reactor

Description : Which of the following may not need a moderator? (A) Candu reactor (B) Fast breeder reactor (C) Homogeneous reactor (D) Pressurised water reactor

Last Answer : (B) Fast breeder reactor

Most of the nuclear power plants operating in the United States are: w) pressurized water reactors x) boiling water reactors y) high-temperature gas-cooled reactors z) liquid-metal fast breeder reactors

Description : Most of the nuclear power plants operating in the United States are: w) pressurized water reactors x) boiling water reactors y) high-temperature gas-cooled reactors z) liquid-metal fast breeder reactors

Last Answer : ANSWER: W -- PRESSURIZED WATER REACTORS 

____________is the difference between the saturation temperature for the given pressure and the actual sub cooled liquid temperature.  a) Degrees of Superheat, °SH  b) Degrees of Sub cooled, °SB  c) Both a and b  d) None of the above

Description : ____________is the difference between the saturation temperature for the given pressure and the actual sub cooled liquid temperature.  a) Degrees of Superheat, °SH  b) Degrees of Sub cooled, °SB  c) Both a and b  d) None of the above

Last Answer : Degrees of Sub cooled, °SB

_____________ is the difference between the actual temperature of superheated vapor and the saturation temperature for the existing pressure.  a) Degrees of Superheat, °SH  b) Degrees of Sub cooled, °SB  c) Both a and b  d) None of the above

Description : _____________ is the difference between the actual temperature of superheated vapor and the saturation temperature for the existing pressure.  a) Degrees of Superheat, °SH  b) Degrees of Sub cooled, °SB  c) Both a and b  d) None of the above

Last Answer : Degrees of Superheat, °SH

Reactors in commercial nuclear power plants in the U.S. are often referred to as thermal reactors. A thermal reactor uses: w) fissionable plutonium-239 as fuel. x) a relatively low heat output. y) neutrons moderated to relatively low energies. z) liquid sodium as a coolant.

Description : Reactors in commercial nuclear power plants in the U.S. are often referred to as thermal reactors. A thermal reactor uses: w) fissionable plutonium-239 as fuel. x) a relatively low heat output. y) neutrons moderated to relatively low energies. z) liquid sodium as a coolant.

Last Answer : ANSWER: Y -- NEUTRONS MODERATED TO RELATIVELY LOW ENERGIES.

In a pressurised water reactor (PWR), the (A) Fuel is natural uranium and heavy water acts both as moderator & coolant (B) Coolant water boils in the core of the reactor (C) Coolant water is pressurised to prevent bulk boiling of water in the core (D) Use of moderator is not required

Description : In a pressurised water reactor (PWR), the (A) Fuel is natural uranium and heavy water acts both as moderator & coolant (B) Coolant water boils in the core of the reactor (C) Coolant water is pressurised to prevent bulk boiling of water in the core (D) Use of moderator is not required

Last Answer : (C) Coolant water is pressurised to prevent bulk boiling of water in the core

The efficiency of superheat Rankine cycle is higher than that of simple Rankine cycle because [GATE-2002] (a) The enthalpy of main steam is higher for superheat cycle (b) The mean temperature of heat addition is higher for superheat cycle (c) The temperature of steam in the condenser is high (d) The quality of stem in the condenser is low

Description : The efficiency of superheat Rankine cycle is higher than that of simple Rankine cycle because [GATE-2002] (a) The enthalpy of main steam is higher for superheat cycle (b) The mean temperature of heat ... temperature of steam in the condenser is high (d) The quality of stem in the condenser is low 

Last Answer :  (b) The mean temperature of heat addition is higher for superheat cycle  

Coolant used in a boiling water reactor is (A) Hydrogen gas (B) Water (C) Steam (D) A mixture of water & steam

Description : Coolant used in a boiling water reactor is (A) Hydrogen gas (B) Water (C) Steam (D) A mixture of water & steam

Last Answer : (D) A mixture of water & steam

Thorium-232 is converted into uranium-233 in a/an __________ nuclear reactor. (A) Thermal (B) Fast breeder (C) Heavy water moderated (D) Enriched uranium

Description : Thorium-232 is converted into uranium-233 in a/an __________ nuclear reactor. (A) Thermal (B) Fast breeder (C) Heavy water moderated (D) Enriched uranium

Last Answer : (B) Fast breeder

__________ moderator is used in a fast breeder reactor. (A) Graphite (B) Heavy water (C) Beryllium (D) No

Description : __________ moderator is used in a fast breeder reactor. (A) Graphite (B) Heavy water (C) Beryllium (D) No

Last Answer : (D) No

Fuel for a fast breeder reactor is (A) Plutonium (B) Uranium (C) Radium (D) Neptunium

Description : Fuel for a fast breeder reactor is (A) Plutonium (B) Uranium (C) Radium (D) Neptunium

Last Answer : (A) Plutonium

Fast breeder Test Reactor (FBTR) is located at (A) Kalpakkam (near Madras) (B) Kota (in Rajasthan) (C) BARC (Trombay) (D) Tarapur (in Maharashtra)

Description : Fast breeder Test Reactor (FBTR) is located at (A) Kalpakkam (near Madras) (B) Kota (in Rajasthan) (C) BARC (Trombay) (D) Tarapur (in Maharashtra)

Last Answer : (A) Kalpakkam (near Madras)

A fast breeder reactor (A) Uses natural uranium as fuel (B) Does not require a moderator (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : A fast breeder reactor (A) Uses natural uranium as fuel (B) Does not require a moderator (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) Does not require a moderator

Fuel for a fast breeder nuclear reactor is (A) Plutonium (B) Uranium (C) Radium (D) Neptunium

Description : Fuel for a fast breeder nuclear reactor is (A) Plutonium (B) Uranium (C) Radium (D) Neptunium

Last Answer : (A) Plutonium

In which of the electric power generation system, the operating cost is minimum? (A) Thermal (B) Nuclear (C) Hydroelectric (D) Fast breeder reactor

Description : In which of the electric power generation system, the operating cost is minimum? (A) Thermal (B) Nuclear (C) Hydroelectric (D) Fast breeder reactor

Last Answer : (C) Hydroelectric

Corona discharge is related to the operation of a/an (A) Induction motor (B) Electrostatic precipitator (C) Fast breeder reactor (D) Magneto hydrodynamic generator (MHD)

Description : Corona discharge is related to the operation of a/an (A) Induction motor (B) Electrostatic precipitator (C) Fast breeder reactor (D) Magneto hydrodynamic generator (MHD)

Last Answer : Option B

Choose the correct statement (a) A refrigerant should have low latent heat (b) If operating temperature of system is low, then refrigerant with low boiling point should be used (c) Pre-cooling and sub-cooling bf refrigerant are same (d) Superheat and sensible heat of a. refrigerant are same

Description : Choose the correct statement (a) A refrigerant should have low latent heat (b) If operating temperature of system is low, then refrigerant with low boiling point should be used (c) Pre-cooling and sub-cooling bf refrigerant are same (d) Superheat and sensible heat of a. refrigerant are same

Last Answer : Ans: b

The part of a nuclear power plant that prevents thermal pollution of lakes or rivers is the: w) reactor x) coolant/moderator y) cooling tower z) control rod

Description : The part of a nuclear power plant that prevents thermal pollution of lakes or rivers is the: w) reactor x) coolant/moderator y) cooling tower z) control rod

Last Answer : ANSWER: Y -- COOLING TOWER

In a co-current double pipe heat exchanger used for condensing saturated steam over the inner tube, if the entrance and exit conditions of the coolant are interchanged, then the rate of condensation will (A) Increase (B) Decrease (C) Remain unchanged (D) Either increase or decrease; depends on the coolant flow rate

Description : In a co-current double pipe heat exchanger used for condensing saturated steam over the inner tube, if the entrance and exit conditions of the coolant are interchanged, then the rate of condensation ... Decrease (C) Remain unchanged (D) Either increase or decrease; depends on the coolant flow rate

Last Answer : (C) Remain unchanged

Which of the following is not used as a moderator in nuclear reactor? (A) Molten sodium (B) Light water (C) Beryllium (D) Boron hydride

Description : Which of the following is not used as a moderator in nuclear reactor? (A) Molten sodium (B) Light water (C) Beryllium (D) Boron hydride

Last Answer : (A) Molten sodium