Ordinary water is not used as a moderator because, it (A) Has a low absorption cross-section (B) Has a low scattering cross-section (C) Absorbs neutrons (D) Does not absorb neutrons

Ordinary water is not used as a moderator because, it
(A) Has a low absorption cross-section
(B) Has a low scattering cross-section
(C) Absorbs neutrons
(D) Does not absorb neutrons
by

1 Answer

Answer :

(C) Absorbs neutrons
by

Related questions

A moderator __________ the neutrons. (A) Slows down (B) Absorbs (C) Accelerates (D) Reflects

Description : A moderator __________ the neutrons. (A) Slows down (B) Absorbs (C) Accelerates (D) Reflects

Last Answer : (A) Slows down

Absorption/scattering cross-section of an element is expressed in "barn", which is equivalent to (A) 10 -24 cm2 (B) 10 -12 cm (C) 1 Angstrom (D) 10 -24 cm

Description : Absorption/scattering cross-section of an element is expressed in "barn", which is equivalent to (A) 10 -24 cm2 (B) 10 -12 cm (C) 1 Angstrom (D) 10 -24 cm

Last Answer : (A) 10 -24 cm

Which of the following pairs is not correctly matched? (A) Uranium - 233 : Fertile material (B) Binding energy : Mass defect (C) Scattering: Absorption cross-section (D) Number of nucleons : Mass number

Description : Which of the following pairs is not correctly matched? (A) Uranium - 233 : Fertile material (B) Binding energy : Mass defect (C) Scattering: Absorption cross-section (D) Number of nucleons : Mass number

Last Answer : (A) Uranium - 233 : Fertile material

The ability of an atom to absorb neutrons is its neutron capture cross section. The unit of measurement for neutron capture cross section is: w) the nucleus volume x) capture capacity y) resonance quotient z) barn

Description : The ability of an atom to absorb neutrons is its neutron capture cross section. The unit of measurement for neutron capture cross section is: w) the nucleus volume x) capture capacity y) resonance quotient z) barn

Last Answer : ANSWER: Z -- BARN

(3) checking the penetration of ultra-violet rays to the earth Explanation: Ozone in the ozone layer filters out sunlight wavelengths from about 200 nm UV rays to 315 nm, with ozone peak absorption at about 250 nm. This ozone UV absorption is important to life, since it extends the absorption of UV by ordinary oxygen and nitrogen in air (which absorbs all wavelengths < 200 nm) through the lower UV-C (200 nm-280 nm) and the entire UV-B band (280 nm-315 nm).

Description : (3) checking the penetration of ultra-violet rays to the earth Explanation: Ozone in the ozone layer filters out sunlight wavelengths from about 200 nm UV rays to 315 nm, with ozone peak absorption at about 250 nm. This ... the lower UV-C (200 nm-280 nm) and the entire UV-B band (280 nm-315 nm).

Last Answer : The advantage of detergents over soaps is – (1) Detergents are soluble in water (2) Detergents could not give much lather (3) Detergents give lather even with hard water (4) Soaps give lather with only soft water

(3) checking the penetration of ultra-violet rays to the earth Explanation: Ozone in the ozone layer filters out sunlight wavelengths from about 200 nm UV rays to 315 nm, with ozone peak absorption at about 250 nm. This ozone UV absorption is important to life, since it extends the absorption of UV by ordinary oxygen and nitrogen in air (which absorbs all wavelengths < 200 nm) through the lower UV-C (200 nm-280 nm) and the entire UV-B band (280 nm-315 nm).

Description : (3) checking the penetration of ultra-violet rays to the earth Explanation: Ozone in the ozone layer filters out sunlight wavelengths from about 200 nm UV rays to 315 nm, with ozone peak absorption at about 250 nm. This ... the lower UV-C (200 nm-280 nm) and the entire UV-B band (280 nm-315 nm).

Last Answer : The advantage of detergents over soaps is – (1) Detergents are soluble in water (2) Detergents could not give much lather (3) Detergents give lather even with hard water (4) Soaps give lather with only soft water

Heavy water is preferred over ordinary water as a coolant, because it. (A) Acts both as an efficient coolant as well as a moderator (B) Can be heated to a higher temperature without pressurizing (C) Is less prone to radiation damage (D) All (A), (B) and (C)

Description : Heavy water is preferred over ordinary water as a coolant, because it. (A) Acts both as an efficient coolant as well as a moderator (B) Can be heated to a higher temperature without pressurizing (C) Is less prone to radiation damage (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Sound is heard over longer distances on rainy days because – (1) sound travels slowly in moist air (2) sound travels faster in moist air (3) moist air does not absorb sound (4) moist air absorbs sound

Description : Sound is heard over longer distances on rainy days because – (1) sound travels slowly in moist air (2) sound travels faster in moist air (3) moist air does not absorb sound (4) moist air absorbs sound

Last Answer : (2) sound travels faster in moist air Explanation: The speed of sound in a medium is inversely proportional to the square root of its density. Higher is the humidity in the air, greater will be the velocity ... of trains and others are heard up to longer distances on a rainy day than on a dry day.

Sound is heard over longer distances on rainy days because (1) sound travels slowly in moist air (2) sound travels faster in moist air (3) moist air does not absorb sound (4) moist air absorbs sound

Description : Sound is heard over longer distances on rainy days because (1) sound travels slowly in moist air (2) sound travels faster in moist air (3) moist air does not absorb sound (4) moist air absorbs sound

Last Answer : sound travels faster in moist air

Pick up the correct statement from the following: (A) Phytoplankton contains photosynthetically active pigment (B) An increase of phytoplankton increases the back scattering in the green region (C) An increase of phytoplankton absorbs the bule region rapidly (D) An increase of phytoplankton decreases the back scattering in the green region

Description : Pick up the correct statement from the following: (A) Phytoplankton contains photosynthetically active pigment (B) An increase of phytoplankton increases the back scattering in the green region ( ... rapidly (D) An increase of phytoplankton decreases the back scattering in the green region

Last Answer : Answer: Option D

The danger signals are red while the eye is more sensitive to yellow because – (1) absorption in red is less than yellow and hence red is visible from a distance (2) scattering in yellow light is less than red (3) the wavelength of red light is more than yellow light (4) none of the above reasons

Description : The danger signals are red while the eye is more sensitive to yellow because – (1) absorption in red is less than yellow and hence red is visible from a distance (2) scattering in yellow light is less than red (3) the wavelength of red light is more than yellow light (4) none of the above reasons

Last Answer : (3) the wavelength of red light is more than yellow light

Stars appear twinkling because of ______ of light. (1) Reflection (2) Scattering (3) Emission (4) Absorption

Description : Stars appear twinkling because of ______ of light. (1) Reflection (2) Scattering (3) Emission (4) Absorption

Last Answer : (2) Scattering Explanation: The stars' light must travel through the Earth's multi-layered atmosphere, and as it does so it is refracted (bent) multiple times and in random directions. The phenomenon of ... star wink as though it is in motion. It is this action that our eyes translate as twinkling.

Stars appear twinkling because of ......... of light. (1) Reflection (2) Scattering (3) Emission (4) Absorption

Description : Stars appear twinkling because of ......... of light. (1) Reflection (2) Scattering (3) Emission (4) Absorption

Last Answer : Scattering

Name the chemical element that is eleventh in the Lanthanide Series in the periodic table. Because of the metal's high thermal-neutron-absorption cross section, it has been of much interest in terms of use in nuclear reactor hardware. The chemical symbol for this element is Er.

Description : Name the chemical element that is eleventh in the Lanthanide Series in the periodic table. Because of the metal's high thermal-neutron-absorption cross section, it has been of much interest in terms of use in nuclear reactor hardware. The chemical symbol for this element is Er.

Last Answer : ANSWER: ERBIUM

Which of the following is used as a moderator in nuclear reactors? (1) Thorium (2) Graphite (3) Ordinary water (4) Radium

Description : Which of the following is used as a moderator in nuclear reactors? (1) Thorium (2) Graphite (3) Ordinary water (4) Radium

Last Answer : (2) Graphite Explanation: Graphite is used a moderator in nuclear reactors.

The moderator used in a nuclear reactor is – (1) Uranium (2) Radium (3) Ordinary water (4) Graphite

Description : The moderator used in a nuclear reactor is – (1) Uranium (2) Radium (3) Ordinary water (4) Graphite

Last Answer : (3) Ordinary water Explanation: Light water (ordinary water) is used as the moderator in U.S. reactors as well as the cooling agent. It acts as the means by which heat is removed to produce steam for turning the turbines of the electric generators.

In a light-water reactor, the coolant is ordinary water. What is the moderator?

Description : In a light-water reactor, the coolant is ordinary water. What is the moderator?

Last Answer : ANSWER: WATER or THE SAME WATER

The moderator used in a nuclear reactor is (1) Uranium (2) Radium (3) Ordinary water (4) Graphite

Description : The moderator used in a nuclear reactor is (1) Uranium (2) Radium (3) Ordinary water (4) Graphite

Last Answer : Ordinary water

Which of the following is used as a moderator in nuclear reactors ? (1) Thorium (2) Graphite (3) Ordinary water (4) Radium

Description : Which of the following is used as a moderator in nuclear reactors ? (1) Thorium (2) Graphite (3) Ordinary water (4) Radium

Last Answer : Graphite

Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Description : Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Last Answer : Moderator is a material which is used to slow down the neutrons produced during nuclear fission ... neutrons C. magnetic neutrons D. electric neutrons

Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Description : Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Last Answer : Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The ... water B. Graphite C. Beryllium D. Sodium

Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Description : Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Last Answer : Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The ... mass number only D. be all the above three

Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Description : Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en

Last Answer : Moderator is a material which is used to slow down the neutrons produced during nuclear fission ... . absorbs thermal energy. Produced in the reactors

In a nuclear reactor the moderator is usually made of graphite placed between the fuel rods used to slow down neutrons all of the above none of the above?

Description : In a nuclear reactor the moderator is usually made of graphite placed between the fuel rods used to slow down neutrons all of the above none of the above?

Last Answer : Feel Free to Answer

Neutrons are slowed down in a nuclear reactor by – (1) Fissionable Material (2) Moderator (3) Control rods (4) Cooling system

Description : Neutrons are slowed down in a nuclear reactor by – (1) Fissionable Material (2) Moderator (3) Control rods (4) Cooling system

Last Answer : (2) Moderator Explanation: In thermal nuclear reactors, the coolant acts as a moderator that must slow down the neutrons before they can be efficiently absorbed by the fuel. It allows neutrons to slow down to energies where they can easily cause a nucleus to fission.

A moderator is used in nuclear reactor in order to ? A. Accelerate the neutrons B. Slow down the speed of the neutrons (Answer) C. Increase the number of elections D. Decrease the number of electrons E. None of these

Description : A moderator is used in nuclear reactor in order to ? A. Accelerate the neutrons B. Slow down the speed of the neutrons (Answer) C. Increase the number of elections D. Decrease the number of electrons E. None of these

Last Answer : B. Slow down the speed of the neutrons (Answer)

Which of the following terms refers to a material which slows neutrons? w) retarder x) moderator y) buffer z) bottleneck

Description : Which of the following terms refers to a material which slows neutrons? w) retarder x) moderator y) buffer z) bottleneck

Last Answer : ANSWER: X -- MODERATOR

Neutrons are slowed down in a nuclear reactor by (1) Fissionable material (2) Moderator (3) Control rods (4) Cooling system

Description : Neutrons are slowed down in a nuclear reactor by (1) Fissionable material (2) Moderator (3) Control rods (4) Cooling system

Last Answer : Moderator

Thermal shield is used in high powered nuclear reactors to (A) Protect the walls of the reactor from radiation damageB) Absorb the fast neutrons(C) Slow down the secondary neutrons(D) Protect the fuel element from coming in contact with the coolant

Description : Thermal shield is used in high powered nuclear reactors to (A) Protect the walls of the reactor from radiation damage B) Absorb the fast neutrons (C) Slow down the secondary neutrons (D) Protect the fuel element from coming in contact with the coolant

Last Answer : (A) Protect the walls of the reactor from radiation damage

The function of moderators in nuclear reactor is to (A) Slow down the secondary neutrons (B) Absorb the secondary neutrons (C) Control the chain reaction (D) None of these

Description : The function of moderators in nuclear reactor is to (A) Slow down the secondary neutrons (B) Absorb the secondary neutrons (C) Control the chain reaction (D) None of these

Last Answer : (A) Slow down the secondary neutrons

Rutherford's scattering experiment proved the presence of – (1) atoms in all matter (2) electrons in atoms (3) neutrons in atoms (4) nucleus in atoms

Description : Rutherford's scattering experiment proved the presence of – (1) atoms in all matter (2) electrons in atoms (3) neutrons in atoms (4) nucleus in atoms

Last Answer : (4) nucleus in atoms Explanation: On the basis of his experiment, Rutherford put forward the model of an atom, which had the following features: There is a positively charged centre in an atom called the nucleus.

Rutherford’s scattering experiment proved the presence of - (1) atoms in all matter (2) electrons in atoms (3) neutrons in atoms (4) nucleusin atoms

Description : Rutherford’s scattering experiment proved the presence of - (1) atoms in all matter (2) electrons in atoms (3) neutrons in atoms (4) nucleusin atoms

Last Answer : (4) nucleusin atoms Explanation: Ernest Rutherford and his fellows Geiger and Marsden proved between 1911 and 1913 the existence of the atomic nucleus. This scattering experirnent led to the development of the Rutherford model (planetary model) of the atom, and eventually to the Bohr model.

Rutherford’s scattering experiment proved the presence of (1) atoms in all matter (2) electrons in atoms (3) neutrons in atoms (4) nucleus in atoms

Description : Rutherford’s scattering experiment proved the presence of (1) atoms in all matter (2) electrons in atoms (3) neutrons in atoms (4) nucleus in atoms

Last Answer : nucleus in atoms

A control rod (A) Should have small absorption cross-section (B) Is generally made of boron, hafnium or cadmium (C) Should have large absorption cross-section (D) Both (B) and (C)

Description : A control rod (A) Should have small absorption cross-section (B) Is generally made of boron, hafnium or cadmium (C) Should have large absorption cross-section (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Which of the following can be used to absorb neutrons to control the chain reaction during nuclear fission? (1) Boron (2) Heavy water (3) Uranium (4) Plutonium

Description : Which of the following can be used to absorb neutrons to control the chain reaction during nuclear fission? (1) Boron (2) Heavy water (3) Uranium (4) Plutonium

Last Answer : (1) Boron Explanation: Boron shielding is used as a control for nuclear reactors, taking advantage of its high cross-section for neutron capture. Elemental boron is rare and ... aluminium. Crystalline boron is chemicallyinert and resistant to attack by boiling hydrofluoric or hydrochloric acid.

Which of the following can be used to absorb neutrons to control the chain reaction during nuclear fission ? (1) Boron (2) Heavy water (3) Uranium (4) Plutonium

Description : Which of the following can be used to absorb neutrons to control the chain reaction during nuclear fission ? (1) Boron (2) Heavy water (3) Uranium (4) Plutonium

Last Answer : Boron

Which is are used nuclear reactors to absorb neutrons?

Description : Which is are used nuclear reactors to absorb neutrons?

Last Answer : control rods

wo elements which are used to absorb neutrons to control the chain reaction during nuclear fission are - (1) Boron and Cadmium (2) Boron and Plutonium (3) Cadmium and Uranium (4) Uranium and Boron

Description : wo elements which are used to absorb neutrons to control the chain reaction during nuclear fission are - (1) Boron and Cadmium (2) Boron and Plutonium (3) Cadmium and Uranium (4) Uranium and Boron

Last Answer : (1) Boron and Cadmium Explanation: Since the continued chain reaction of a nuclear fission reactor depends upon at least one neutron from each fission being absorbed by another fissionable nucleus, the ... and then the control rods are slowly lifted until a chain reaction can just be sustained.

The two elements which are used to absorb the neutrons in nuclear fission during chain reaction

Description : The two elements which are used to absorb the neutrons in nuclear fission during chain reaction

Last Answer : Boran and Cadmium

In the nuclear reactors, moderators are used to : (1) Accelerate neutrons (2) Absorb the neutrons (3) Slow down the neutrons (4) Generate neutrons

Description : In the nuclear reactors, moderators are used to : (1) Accelerate neutrons (2) Absorb the neutrons (3) Slow down the neutrons (4) Generate neutrons

Last Answer : Slow down the neutrons

Two elements which are used to absorb neutrons to control the chain reaction during nuclear fission are (1) Boron and Cadmium (2) Boron and Plutonium (3) Cadmium and Uranium (4) Uranium and Boron

Description : Two elements which are used to absorb neutrons to control the chain reaction during nuclear fission are (1) Boron and Cadmium (2) Boron and Plutonium (3) Cadmium and Uranium (4) Uranium and Boron

Last Answer :  Boron and Cadmium

The blue colour of water in the sea is due to – (1) absorption of other colours except blue by water molecules (2) scattering of blue light by water molecules (3) reflection of blue light by impurities in sea water (4) reflection of blue sky by sea water

Description : The blue colour of water in the sea is due to – (1) absorption of other colours except blue by water molecules (2) scattering of blue light by water molecules (3) reflection of blue light by impurities in sea water (4) reflection of blue sky by sea water

Last Answer : (1) absorption of other colours except blue by water molecules Explanation: Almost all sunlight that enters the ocean is absorbed, except very close to the coast. The red, yellow, and green ... to the absorption and scattering of light. The blue wavelengths of light are scattered, similar to the

The blueness of the sky is mainly due to -------? A. The scattering of sunlight by air molecules (Answer) B. The presence of water vapor C. Absorption of blue light by the air D. Emission of blue light by the atmosphere

Description : The blueness of the sky is mainly due to -------? A. The scattering of sunlight by air molecules (Answer) B. The presence of water vapor C. Absorption of blue light by the air D. Emission of blue light by the atmosphere

Last Answer : A. The scattering of sunlight by air molecules (Answer)

The optical property of a water body depends on: (A) Absorption by the dissolved material (B) Absorption by the suspended particulate matter (C) Scattering by the suspended particulate matter (D) All of these

Description : The optical property of a water body depends on: (A) Absorption by the dissolved material (B) Absorption by the suspended particulate matter (C) Scattering by the suspended particulate matter (D) All of these

Last Answer : Answer: Option D

On nephelometry turbidity unit (NTU) is equal to the turbidity produced by (a) 1 mg SiO2 dissolved in 1 l of distilled water with the test being run according to absorption principle (b) 1 mg SiO2 dissolved in 1 l of distilled water with the test being run according t scattering principle (c) 1 mg Formazin dissolved in 1 l of distilled water with the test being run according to absorption principle (d) 1 mg Formazin dissolved in 1 l o f distilled water with the test being run according to scattering principle.

Description : On nephelometry turbidity unit (NTU) is equal to the turbidity produced by (a) 1 mg SiO2 dissolved in 1 l of distilled water with the test being run according to absorption principle (b) 1 ... Formazin dissolved in 1 l o f distilled water with the test being run according to scattering principle.

Last Answer : (d) 1 mg Formazin dissolved in 1 l o f distilled water with the test being run according to scattering principle.

The blue colour of water in the sea is due to (1) absorption of other colours except blue by water molecules (2) scattering of blue light by water molecules (3) reflection of blue light by impurities in sea water (4) reflection of blue sky by sea water

Description : The blue colour of water in the sea is due to (1) absorption of other colours except blue by water molecules (2) scattering of blue light by water molecules (3) reflection of blue light by impurities in sea water (4) reflection of blue sky by sea water

Last Answer : absorption of other colours except blue by water molecules

Pick out the wrong statement. (A) Isotopes have the same number of protons & electrons, but different number of neutrons (B) Hydrogen has two isotopes (C) In ordinary hydrogen, 1H1 and 1H2 are present in the ratio 6400:1 (D) None of these

Description : Pick out the wrong statement. (A) Isotopes have the same number of protons & electrons, but different number of neutrons (B) Hydrogen has two isotopes (C) In ordinary hydrogen, 1H1 and 1H2 are present in the ratio 6400:1 (D) None of these

Last Answer : (B) Hydrogen has two isotopes

In which of the following layer of atmosphere the absorption and scattering of the solar ultraviolet radiation takes place? (1) Troposphere (2) Stratosphere (3) Mesosphere (4) Thermosphere

Description : In which of the following layer of atmosphere the absorption and scattering of the solar ultraviolet radiation takes place? (1) Troposphere (2) Stratosphere (3) Mesosphere (4) Thermosphere

Last Answer : (2) Stratosphere Explanation: Solar ultraviolet radiation undergoes absorption and scattering as it passes through the stratospheric layer of the earth's atmosphere. The ozone layer, a region of Earth's ... result, no UV radiation at wavelengths shorter than 290 nm reaches the surface of the earth.

Fibre optics work on the principle of - (1) scattering of light (2) total internal absorption (3) total internal reflection (4) option rotation

Description : Fibre optics work on the principle of - (1) scattering of light (2) total internal absorption (3) total internal reflection (4) option rotation

Last Answer : (3) total internal reflection Explanation: An optical fibre is a cylindrical dielectric waveguide (non-conducting waveguide) that transmits light along its axis, by the process of total internal reflection.

Fibre optics work on the principle of – (1) Scattering of light (2) Total internal absorption (3) Total internal reflection (4) Optical rotation

Description : Fibre optics work on the principle of – (1) Scattering of light (2) Total internal absorption (3) Total internal reflection (4) Optical rotation

Last Answer : (3) Total internal reflection Explanation: An optical fiber (or optical fibre) is a flexible, transparent fiber made of glass (silica) or plastic, slightly thicker than a human hair. It ... science and engineering concerned with the design and application of optical fibers is known as fiber optics.