Description : wo elements which are used to absorb neutrons to control the chain reaction during nuclear fission are - (1) Boron and Cadmium (2) Boron and Plutonium (3) Cadmium and Uranium (4) Uranium and Boron
Last Answer : (1) Boron and Cadmium Explanation: Since the continued chain reaction of a nuclear fission reactor depends upon at least one neutron from each fission being absorbed by another fissionable nucleus, the ... and then the control rods are slowly lifted until a chain reaction can just be sustained.
Description : Which of the following can be used to absorb neutrons to control the chain reaction during nuclear fission? (1) Boron (2) Heavy water (3) Uranium (4) Plutonium
Last Answer : (1) Boron Explanation: Boron shielding is used as a control for nuclear reactors, taking advantage of its high cross-section for neutron capture. Elemental boron is rare and ... aluminium. Crystalline boron is chemicallyinert and resistant to attack by boiling hydrofluoric or hydrochloric acid.
Description : Which of the following can be used to absorb neutrons to control the chain reaction during nuclear fission ? (1) Boron (2) Heavy water (3) Uranium (4) Plutonium
Last Answer : Boron
Description : The two elements which are used to absorb the neutrons in nuclear fission during chain reaction
Last Answer : Boran and Cadmium
Description : Of the following, which non-fissioning element is used in the cooling water of nuclear power plants to help control the rate of the fission reaction by absorbing neutrons: w) zirconium x) boron y) krypton z) cesium
Last Answer : ANSWER: X -- BORON
Description : The element which is commonly used in nuclear for producing electricity by nuclear fission is – (1) Radium (2) Plutonium (3) Uranium (4) Deuterium
Last Answer : (3) Uranium Explanation: Uranium is used to produce a chemical and nuclear reaction which makes a lot of heat.
Description : The element which is commonly used in nuclear for producing electricity by nuclear fission is (1) Radium (2) Plutonium (3) Uranium (4) Deuterium
Last Answer : (3) Uranium It is the most common element used to get nuclear energy Hope this will you
Description : What substance was used as a moderator for the chain reaction in the first nuclear reactor? w) graphite x) boron y) water z) cadmium
Last Answer : ANSWER: W -- GRAPHITE
Description : The function of moderators in nuclear reactor is to (A) Slow down the secondary neutrons (B) Absorb the secondary neutrons (C) Control the chain reaction (D) None of these
Last Answer : (A) Slow down the secondary neutrons
Description : The main purpose of control rod in a nuclear reactor is to control the (A) Chain reaction and hence the power output by regulating the number of secondary neutrons causing fission (B) ... radiation (C) Conversion of fissile material into fertile material (D) Velocity of the secondary neutrons
Last Answer : (A) Chain reaction and hence the power output by regulating the number of secondary neutrons causing fission
Description : Heat is generated in a nuclear reactor (thermal) by (A) Combustion of a nuclear fuel e.g. uranium (B) Fusion of atoms of uranium (C) Absorption of neutrons in uranium atoms (D) Fission of U-235 by neutrons
Last Answer : (D) Fission of U-235 by neutrons
Description : Name the particle that is most essential to continue the chain reaction during the fission of uranium - (1) Electron (2) Proton (3) Neutron (4) Positron
Last Answer : (3) Neutron Explanation: Nuclear fission is either a nuclear reaction or a radioactive decay process in which the nucleus of an atom splits into smaller parts (lighter nuclei), often producing ... in the modern world is usually a deliberately produced manmade nuclear reaction induced by a neutron.
Description : Name the particle that is most essential to continue the chain reaction during the fission of uranium- (1) Electron (2) Proton (3) Neutron (4) Positron
Last Answer : Neutron
Description : __________ is not used as the control rod material in a nuclear reactor. (A) Cobalt (B) Hafnium (C) Cadmium (D) Boron
Last Answer : (A) Cobalt
Description : The long range potential of nuclear energy in India depends on its reserves of – (1) thorium (2) uranium (3) plutonium (4) radium
Last Answer : (2) uranium Explanation: India's domestic uranium reserves are small and the country is dependent on uranium imports to fuel its nuclear power industry. Since early 1990s, Russia has been a major supplier of nuclear fuel-to India.
Description : Nuclear energy is a mineralbased energy source. It is derived from (1) uranium (2) thorium (3) plutonium (4) All of the above
Last Answer : uranium
Description : The long range potential of nuclear energy in India depends on its reserves of (1) thorium (2) uranium (3) plutonium (4) radium
Description : Which of the following elements is not radioactive? (1) Radium (2) Plutonium (3) Zirconium (4) Uranium
Last Answer : (3) Zirconium Explanation: Zireonium is a lustrous, greywhite, strong transition metal that resembles titanium. Zirconium is mainly used as a refractory and pacifier, although it is used in small amounts as an alloying agent for its strong resistance to corrosion.
Description : Which of the following elements is nonradioactive? (1) Uranium (2) Thorium (3) Plutonium (4) Zirconium
Last Answer : (4) Zirconium Explanation: Zirconium is non-radioactive. It is a chemical element with the symbol Zr, atomic number 40 and atomic mass of 91.224. The name of zirconium is taken from the ... important source of zirconium. It is a lustrous, grey-white, strong transition metal that resembles titanium.
Description : Which of the following elements is not radio-active ? (1) Radium (2) Plutonium (3) Zirconium (4) Uranium
Last Answer : Zirconium
Description : Which of the following elements is non-radioactive ? (1) Uranium (2) Thorium (3) Plutonium (4) Zirconium
Description : Safety rods provided in nuclear reactors to guard against accidents, in case of earthquake are made of (A) High carbon steel (B) Molybdenum (C) Zircaloy (D) Boron or cadmium
Last Answer : (D) Boron or cadmium
Description : Plutonium Plutonium is used as _____. A. Fuel for Nuclear Fission B. Fuel for Nuclear Fusion C. Source of Chemical Energy D. Source of Light Energy
Last Answer : ANSWER: A
Description : Plutonium is used as _____. A. Fuel for Nuclear Fission B. Fuel for Nuclear Fusion C. Source of Chemical Energy D. Source of Light Energy
Description : Spent fuel from the nuclear thermal reactor contains (A) Fission products (B) Plutonium (C) Unused fuel (D) All (A), (B) & (C
Last Answer : (D) All (A), (B) & (C
Description : In a nuclear reactor the material use for absorbing neutrons is – (1) zinc (2) radium (3) lead (4) cadmium
Last Answer : (4) cadmium Explanation: One isotope of cadmium, 113Cd, absorbs neutrons with very high probability if they have an energy below the cadmium cut-off and transmits them otherwise. The cadmium ... below the cut-off are deemed slow neutrons, distinguishing them from intermediate and fast neutrons.
Description : In a nuclear reactor the material use for absorbing neutrons is (1) zinc (2) radium (3) lead (4) cadmium
Last Answer : cadmium
Description : Which of the following nuclear materials is fissile? (A) Uranium-238 (B) Thorium-232 (C) Plutonium-239 (D) None of these
Last Answer : (C) Plutonium-239
Description : Nuclear fuel usually used in a Boiling Water Reactor (BWR) is (A) Plutonium (B) Enriched uranium (C) Natural uranium (D) Thorium
Last Answer : (B) Enriched uranium
Description : The most commonly used nuclear fuel in boiling water reactor is (A) Enriched uranium (B) Natural uranium (C) Plutonium
Last Answer : (A) Enriched uranium
Description : Fuel for a nuclear reactor (thermal) is (A) Uranium (B) Plutonium (C) Radium (D) None of these
Last Answer : (A) Uranium
Description : Which of the following is not a naturally occurring nuclear fuel? (A) Uranium-238 (B) Thorium-233 (C) Plutonium-239 (D) None of these
Description : Fuel for a fast breeder nuclear reactor is (A) Plutonium (B) Uranium (C) Radium (D) Neptunium
Last Answer : (A) Plutonium
Description : The particle required to continue the chain process of Uranium fission is – (1) Electron (2) Proton (3) Neutron (4) Positron
Last Answer : (3) Neutron Explanation: Fission as encountered in the modern world is usually a deliberately produced man-made nuclear reaction induced by a neutron. The nuclear fuels undergo fission when struck by fission ... rate in a nuclear reactor or at a very rapid uncontrolled rate in a nuclear weapon.
Description : The particle required to continue the chain process of Uranium fission is : (1) Electron (2) Proton (3) Neutron (4) Positron
Description : Reactors in commercial nuclear power plants in the U.S. are often referred to as thermal reactors. A thermal reactor uses: w) fissionable plutonium-239 as fuel. x) a relatively low heat output. y) neutrons moderated to relatively low energies. z) liquid sodium as a coolant.
Last Answer : ANSWER: Y -- NEUTRONS MODERATED TO RELATIVELY LOW ENERGIES.
Description : Fuel used in a nuclear reactor is (a) Uranium (b) Heavy water (c) Barium (d) Cadmium
Last Answer : Ans:(a)
Description : Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The neutrons from the source are of high speed and en
Last Answer : Moderator is a material which is used to slow down the neutrons produced during nuclear fission ... neutrons C. magnetic neutrons D. electric neutrons
Last Answer : Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The ... water B. Graphite C. Beryllium D. Sodium
Last Answer : Moderator is a material which is used to slow down the neutrons produced during nuclear fission. The ... mass number only D. be all the above three
Last Answer : Moderator is a material which is used to slow down the neutrons produced during nuclear fission ... . absorbs thermal energy. Produced in the reactors
Description : The part of the nuclear reactor that controls the speed of neutrons released during nuclear fission is
Last Answer : moderator.
Description : A control rod (A) Should have small absorption cross-section (B) Is generally made of boron, hafnium or cadmium (C) Should have large absorption cross-section (D) Both (B) and (C)
Last Answer : (D) Both (B) and (C)
Description : A nuclear reactor harnesses nuclear energy by A. Nuclear fusion B. Spontaneous fission C. Uncontrolled chain reaction D. Controlled chain reaction
Last Answer : ANSWER: D
Description : What is the difference between nuclear fission and fission chain reaction.
Last Answer : The process of splitting of nucleus into two almost equal fragments accompanied by re¬lease of heat is nuclear fission. Self sustained, continuing, sequence of fission reactions in a con¬trolled manner is fission chain reaction.
Description : Because uranium 235 isn't found naturally in large quantities, engineers increase its concentration in nuclear fuel so that a chain reaction is more likely to occur. What is the name of this process?
Last Answer : Enrichment
Description : Nuclear fission of one atom of uranium-235 produces the energy equivalent to about __________ MeV. (A) 20 (B) 200 (C) 500 (D) 2000
Last Answer : (B) 200
Description : Which is are used nuclear reactors to absorb neutrons?
Last Answer : control rods