Description : Poly-methyl-methacrylate (PMMA) is known as (A) Bakelite (B) Teflon (C) Perspex (D) Nylon-6
Last Answer : (C) Perspex
Description : Which of the following is not the commercial name of poly-methyl methacrylate (PMMA)? (A) Styrofoam (B) Lucite (C) Perspex (D) Plexiglass
Last Answer : (A) Styrofoam
Description : Lavatory cisterns are normally made of (A) Expanded polystyrene (B) Saturated polyester (C) Perspex (D) PVC
Last Answer : (A) Expanded polystyrene
Description : Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent
Last Answer : (B) Thermosetting
Description : Perspex can be used as a substitute of glass. Its monomer is (A) Methyl methacrylate (B) DMT (C) Butadiene (D) Tetrafluoroethylene
Last Answer : (A) Methyl methacrylate
Description : Flexible plastic pipes are made of (A) High density polyethylene (HDPE) (B) Low density polyethylene (LDPE) (C) Polypropylene (D) Unsaturated polyester
Last Answer : (B) Low density polyethylene (LDPE)
Description : __________ is normally used for the manufacture of refrigerator components and transistor parts. (A) Polypropylene (B) Polystyrene (C) Polyester (D) Polyurethane
Last Answer : (B) Polystyrene
Description : Which of the following is not a condensation polymer? (A) Bakelite (B) Melamine polymer (C) Poly-methyl-methacrylate (PMMA) (D) None of these
Last Answer : (C) Poly-methyl-methacrylate (PMMA)
Description : Poly-methyl-methacrylate, which is an acrylic resin, is also called (A) Thiokol (B) Plexiglass or Lucite (C) Dacron (D) Teflon
Last Answer : (B) Plexiglass or Lucite
Description : Orlan fibre which is used as a wool substitute is (A) An amorphous polymer (B) A natural polymeric fibre (C) Polyacrylonitrile (D) Poly-methyl-methacrylate (PMMA)
Last Answer : (C) Polyacrylonitrile
Description : The most commonly used resin for making reinforced plastic is (A) Unsaturated polyester (B) Polypropylene
Last Answer : (A) Unsaturated polyester
Description : Polymethyl methacrylate (PMMA) is known as (A) Bakelite (B) Teflon (C) Perspex (D) Nylon-6
Description : Window panes of aeroplanes are normally made of (A) Perspex (PMMA) (B) Teflon (PTFE) (C) Bakelite (phenol formaldehyde) (D) Polystyrene
Last Answer : Option A
Description : Hot drink (e.g., tea) cups are usually made of (A) Polystyrene (B) Polythene (C) Polypropylene (D) PVC
Last Answer : (A) Polystyrene
Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite
Last Answer : (B) Nylon-66
Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelit
Description : Which of the following is not the commercial name of poly-methylmethacrylate (PMMA)? (A) Perspex (B) Lucite (C) Plexiglass (D) Teflon
Last Answer : (D) Teflon
Description : Which of the following is a copolymer? (A) Polystyrene (B) SBR (C) PTFE (D) Polypropylene
Last Answer : (B) SBR
Description : Benzoyl chloride is not used as a catalyst in the manufacture of (A) Polystyrene (B) Polyvinyl acetate (C) Polypropylene (D) Polyvinyl chloride-co-vinyl acetate
Last Answer : (C) Polypropylene
Description : Which of the following is not a polyolefin? (A) Polystyrene (B) Polypropylene (C) Neoprene (D) None of these
Last Answer : (C) Neoprene
Description : Identify the group in which all the polymers mentioned can be used to make fibres. (A) Butadiene copolymers, Polyamides, Urea-formaldehyde (B) Cellulose derivatives, Polyisoprene, Polyethylene (C) Cellulose derivatives, Polyamides, Polyurethane (D) Polypropylene, Poly vinyl chloride, Silicon
Last Answer : (B) Cellulose derivatives, Polyisoprene, Polyethylene
Description : Nylon is made up of : (1) Polyamide (2) Polyester (3) Polyethylene (4) Polypropylene
Last Answer : (1) Polyamide Explanation: Nylon is a generic designation for a family of synthetic polymers known generically as aliphatic polyamides. It is one of the most commonly used polymers.
Last Answer : Polyamide
Description : Which of the following is used as no coating for Cooking utensils? (1) Perspex (2) Styrofoam (3) Polystyrene (4) (4)Teflon
Last Answer : (4)Teflon Explanation: The non-stick coating used mainly for coating cooking utensils is made using PTFE (polytetrafluoroethylene) that is also known by the name Teflon. Teflon is an inert polymer ... containing substances wet it and it has one of the lowest coefficients of friction of any solid.
Description : Which of the following is used as non-stick coating for cooking utensils? (1) Perspex (2)Styrofoam (3) Polystyrene (4)Teflon
Last Answer : Teflon
Description : Transistor parts and refrigerator components are normally made of (A) Polystyrene (B) Polyester (C) High density polythene (D) Polyurethane
Description : Plexiglass (also called Lucite) because of its high optical transparency is used for making lenses. It is chemically (A) Polymethyl methacrylate (PMMA) (B) Polytetrafluroethylene (PTFE) (C) Polycarbonates (D) Phenolic resins
Last Answer : (A) Polymethyl methacrylate (PMMA)
Description : Most of the fibre forming polymers are crystalline in nature, one of the exceptions being __________ which is amorphous in nature. (A) Nylon (B) Polyacrylonitrile (C) Polypropylene (D) Polyester
Last Answer : (B) Polyacrylonitrile
Description : Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter ... the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene
Last Answer : (A) Acrylic
Description : The method of addition polymerization is used for obtaining: (A) Polystyrene (B) Polypropylene (C) Polyvinylchloride (D) All of thesea
Last Answer : Answer: Option D
Description : Main constituent of natural rubber is (A) Polystyrene (B) Polyisoprene (C) Polybutadiene (D) Poly chloroprene
Last Answer : (B) Polyisoprene
Description : Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide
Last Answer : (D) Polyhexamethylene adipamide
Description : Which of the following is produced by condensation polymerisation? (A) Bakelite (B) Polythene (C) Poly vinyl chloride (D) Polystyrene
Last Answer : (A) Bakelite
Description : Thermocol is a spongy, porous, rigid or flexible foamed plastic, obtained by blowing gas/air through molten (A) Saturated polyester (B) Polyurethane (C) Polystyrene (D) Either (B) or (C)
Last Answer : (D) Either (B) or (C)
Description : Glyptal used in the manufacture of paints & lacquers is a __________ polymer. (A) Polyamide (B) Polystyrene (C) Polyester (D) Polyacrylonitril
Last Answer : (C) Polyester
Description : Perspex is nothing but (A) Acrylic sheet (B) An elastomer (C) An alloy of lead and tin (D) Aluminium foil clad with Bakelite
Last Answer : (A) Acrylic sheet
Description : Which of the following is used to make light weight, but strong plastic? (1) Nylon (2) Polythene (3) Polyvinyl Chloride (4) Methyl Methacrylate
Last Answer : (3) Polyvinyl Chloride Explanation: Polyvinyl chloride (PVC) is a common, strong but lightweight plastic that is used in making tough plastic. It is used for flexible applications such ... cables. It is the third-most widely produced synthetic plastic polymer, after polyethylene and polypropylene.
Description : Which of the following is used to make light weight, but strong plastic ? (1) Nylon (2) Polythene (3) Polyvinyl Chloride (4) Methyl Methacrylate
Last Answer : Polyvinyl Chloride
Description : How much does a gallon of Methyl methacrylate weigh?
Last Answer : The weight of 1 US gallon is approx 40.7 newtons.
Description : Acrylic is the name of (A) Cellulose resin (B) Alkyd resin (C) Methyl methacrylate (D) Cumarone-indene
Last Answer : Answer: Option C
Description : The powder component of IRM is essentially A. EBA with methyl methacrylate B. Zinc oxide with EBA C. Zinc oxide and aluminum oxide D. Zinc oxide and methyl methacrylate E. Zinc oxide and ethyl methacrylate
Last Answer : D. Zinc oxide and methyl methacrylate
Description : Which of the following is stretched into fibres? (A) Saturated polyester (B) Unsaturated polyester (C) Isoprene (D) Bakelite
Last Answer : (A) Saturated polyester
Description : Dacron is a/an (A) Polyester (B) Unsaturated polyester (C) Polyamide (D) Inorganic polyme
Last Answer : (A) Polyeste
Description : __________ are produced by reacting polybasic acid (e.g. Phthalic anhydride) with polyhydric alcohol (e.g., glycerol). (A) Unsaturated polyester (B) Alkyd resins (C) Saturated polyester (D) Amino resins
Last Answer : (B) Alkyd resins
Description : The main use of butadiene is (A) As a plasticiser for unsaturated polyester (B) In the manufacture of synthetic rubber (C) As an anti-skimming agent in paint (D) None of these
Last Answer : (B) In the manufacture of synthetic rubber
Description : Dacron is a/an (A) Polyester (B) Unsaturated polyester (C) Polyamide (D) Inorganic polymer
Last Answer : (A) Polyester
Description : Aryl benzene sulphonate (ABS) is a (A) Detergent (B) Plasticiser for unsaturated polyester (C) Starting material for the synthesis of glycerine (D) Coating ingredient for photographic film
Last Answer : (A) Detergent
Description : The major use of butadiene is (A) As a plasticiser for unsaturated polyester (B) In the manufacture of synthetic rubber (C) As an anti-skinning agent in paint (D) None of these
Description : Carbon disulphide is mainly used in the production of(A) Viscose rayon (B) Corundum (C) Plasticiser for unsaturated polyester (D) Paints
Last Answer : (A) Viscose rayon
Description : Predominant fatty acids in meat are (A) Saturated (B) Monounsaturated (C) Polyunsaturated (D) Mono and poly-unsaturated
Last Answer : Answer : A