Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelit

Adipic acid is an intermediate in the manufacture of
(A) Perspex
(B) Nylon-66
(C) Polystyrene
(D) Bakelit
by

1 Answer

Answer :

(B) Nylon-66
by

Related questions

Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite

Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite

Last Answer : (B) Nylon-66

Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these

Description : Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these

Last Answer : (A) Hexamethylene diamine and adipic acid

Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol

Description : Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol

Last Answer : (A) Adipic acid and Hexamethylene diamine

Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin

Description : Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin

Last Answer : (B) Nylon-66

The organic acid monomer in nylon-66 is (A) Sebacic acid (B) Terephthalic acid (C) Adipic acid (D) Benzoic acid

Description : The organic acid monomer in nylon-66 is (A) Sebacic acid (B) Terephthalic acid (C) Adipic acid (D) Benzoic acid

Last Answer : (C) Adipic acid

In nylon-66, the first and second numbers (i.e., 6) respectively designate the number of carbon atoms present in the (A) Hexamethylene diamine and the ring (B) Hexamethylene diamine and the adipic acid (C) Adipic acid and the ring (D) None of these

Description : In nylon-66, the first and second numbers (i.e., 6) respectively designate the number of carbon atoms present in the (A) Hexamethylene diamine and the ring (B) Hexamethylene diamine and the adipic acid (C) Adipic acid and the ring (D) None of these

Last Answer : (B) Hexamethylene diamine and the adipic acid

Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol

Description : Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol

Last Answer : (A) Hexamethylene diamine and adipic acid

The polymer obtained by the condensation of hexamethylene diamine and adipic acid is – (1) Nylon 66 (2) Terylene (3) Tollen's (4) Bakelite

Description : The polymer obtained by the condensation of hexamethylene diamine and adipic acid is – (1) Nylon 66 (2) Terylene (3) Tollen's (4) Bakelite

Last Answer : (1) Nylon 66 Explanation: Polymers are very high molecular mass substances each molecule of which consists of very large number of simple structural units joined together though covalent bonds ... the repeating structural unit is derived from two monomer units - hexamethylenediamine and adipic acid.

The polymer obtained by the condensation of hexamethylene diamine and adipic acid is : (1) Nylon 66 (2) Terylene (3) Tollen’s (4) Bakelite

Description : The polymer obtained by the condensation of hexamethylene diamine and adipic acid is : (1) Nylon 66 (2) Terylene (3) Tollen’s (4) Bakelite

Last Answer : Nylon 66

Synthetic polymer produced by using terephthalic acid and ethylene glycol is (A) Terylene (B) Nylon-66 (C) PVC (D) Polystyrene

Description : Synthetic polymer produced by using terephthalic acid and ethylene glycol is (A) Terylene (B) Nylon-66 (C) PVC (D) Polystyrene

Last Answer : (A) Terylene

__________ is not a condensation polymer. (A) Teflon (B) Nylon-66 (C) Dacron (D) Polystyrene

Description : __________ is not a condensation polymer. (A) Teflon (B) Nylon-66 (C) Dacron (D) Polystyrene

Last Answer : (A) Teflon

Bristles of tooth brushes are made of (A) Nylon-6 (B) Nylon-66 (C) Polystyrene (D) PVC

Description : Bristles of tooth brushes are made of (A) Nylon-6 (B) Nylon-66 (C) Polystyrene (D) PVC

Last Answer : (B) Nylon-66

Which of the following has the weakest intermolecular forces? (A) Polyisoprene (B) Nylon-66 (C) Polystyrene (D) Bakelite

Description : Which of the following has the weakest intermolecular forces? (A) Polyisoprene (B) Nylon-66 (C) Polystyrene (D) Bakelite

Last Answer : (A) Polyisoprene

The plastic material commonly used for making gear wheels is – (1) Polyesters (2) Nylons (3) Bakelit (4) Polystyrene

Description : The plastic material commonly used for making gear wheels is – (1) Polyesters (2) Nylons (3) Bakelit (4) Polystyrene

Last Answer : (2) Nylons Explanation: Popular materials for plastic gears are acetal resins such as DELRIN, Duracon M90; nylon resins such as ZYTEL, NYLATRON, MC901 and acetal copolymers such as ... vary with regard to strength, rigidity, dimensional stability, lubrication requirements, moisture absorption, etc.

The plastic material commonly used for making gear wheels is (1) Polyesters (2) Nylons (3) Bakelit (4) Polystyrene

Description : The plastic material commonly used for making gear wheels is (1) Polyesters (2) Nylons (3) Bakelit (4) Polystyrene

Last Answer : Nylons

Lavatory cisterns are normally made of (A) Expanded polystyrene (B) Saturated polyester (C) Perspex (D) PVC

Description : Lavatory cisterns are normally made of (A) Expanded polystyrene (B) Saturated polyester (C) Perspex (D) PVC

Last Answer : (A) Expanded polystyrene

Contact lenses for eyes are made of Perspex, which is nothing but (A) poly-methyl-methacrylate (B) Polystyrene (C) Unsaturated polyester (D) Polypropylene

Description : Contact lenses for eyes are made of Perspex, which is nothing but (A) poly-methyl-methacrylate (B) Polystyrene (C) Unsaturated polyester (D) Polypropylene

Last Answer : (A) poly-methyl-methacrylate

Window panes of aeroplanes are normally made of (A) Perspex (PMMA) (B) Teflon (PTFE) (C) Bakelite (phenol formaldehyde) (D) Polystyrene

Description : Window panes of aeroplanes are normally made of (A) Perspex (PMMA) (B) Teflon (PTFE) (C) Bakelite (phenol formaldehyde) (D) Polystyrene

Last Answer : Option A

Nylon-6 is manufactured from (A) Caprolactam (B) Adipic acid and Hexamethylenediamine (C) Maleic anhydride and Hexamethylenediamine (D) Sebacic acid and Hexamethylenediamine

Description : Nylon-6 is manufactured from (A) Caprolactam (B) Adipic acid and Hexamethylenediamine (C) Maleic anhydride and Hexamethylenediamine (D) Sebacic acid and Hexamethylenediamine

Last Answer : (A) Caprolactam

Nylon-6 is manufactured from (A) Caprolactam (B) Hexamethylene diamine and adipic acid (C) Hexamethylene diamine and Maleic anhydride (D) Hexamethylene diamine and Sebacic acid

Description : Nylon-6 is manufactured from (A) Caprolactam (B) Hexamethylene diamine and adipic acid (C) Hexamethylene diamine and Maleic anhydride (D) Hexamethylene diamine and Sebacic acid

Last Answer : (A) Caprolactam

Which of the following is used as no coating for Cooking utensils? (1) Perspex (2) Styrofoam (3) Polystyrene (4) (4)Teflon

Description : Which of the following is used as no coating for Cooking utensils? (1) Perspex (2) Styrofoam (3) Polystyrene (4) (4)Teflon

Last Answer : (4)Teflon Explanation: The non-stick coating used mainly for coating cooking utensils is made using PTFE (polytetrafluoroethylene) that is also known by the name Teflon. Teflon is an inert polymer ... containing substances wet it and it has one of the lowest coefficients of friction of any solid.

Which of the following is used as non-stick coating for cooking utensils? (1) Perspex (2)Styrofoam (3) Polystyrene (4)Teflon

Description : Which of the following is used as non-stick coating for cooking utensils? (1) Perspex (2)Styrofoam (3) Polystyrene (4)Teflon

Last Answer : Teflon

Adipic acid reacts with hexamethylene diamine to form (a) Bakelite (b) Nylon-6,6 (c) Terylene (d) Nylon-6,8

Description : Adipic acid reacts with hexamethylene diamine to form (a) Bakelite (b) Nylon-6,6 (c) Terylene (d) Nylon-6,8

Last Answer : Nylon-6,6

Nylon-6,6 is obtained from : (a) Adipic acid and hexamethylene diamine (b) Tetrafluoroethylene (c) Vinyl cyanide (d) Vinylbenzene

Description : Nylon-6,6 is obtained from : (a) Adipic acid and hexamethylene diamine (b) Tetrafluoroethylene (c) Vinyl cyanide (d) Vinylbenzene

Last Answer : Adipic acid and hexamethylene diamine

Poly-methyl-methacrylate (PMMA) is known as (A) Bakelite (B) Teflon (C) Perspex (D) Nylon-6

Description : Poly-methyl-methacrylate (PMMA) is known as (A) Bakelite (B) Teflon (C) Perspex (D) Nylon-6

Last Answer : (C) Perspex

Polymethyl methacrylate (PMMA) is known as (A) Bakelite (B) Teflon (C) Perspex (D) Nylon-6

Description : Polymethyl methacrylate (PMMA) is known as (A) Bakelite (B) Teflon (C) Perspex (D) Nylon-6

Last Answer : (C) Perspex

Which of the following polymers has the tendency of decomposing before melting? (A) Polystyrene (B) Nylon (C) PVC (D) None of these

Description : Which of the following polymers has the tendency of decomposing before melting? (A) Polystyrene (B) Nylon (C) PVC (D) None of these

Last Answer : (C) PVC

In nylon-66, the first and second numbers (i.e., 6) respectively designate the number of carbon atoms present in the (A) Diamine and the ring (B) Dibasic acid and the ring (C) Diamine and the dibasic acid (D) None of these

Description : In nylon-66, the first and second numbers (i.e., 6) respectively designate the number of carbon atoms present in the (A) Diamine and the ring (B) Dibasic acid and the ring (C) Diamine and the dibasic acid (D) None of these

Last Answer : (C) Diamine and the dibasic acid

__________ is normally used for the manufacture of refrigerator components and transistor parts. (A) Polypropylene (B) Polystyrene (C) Polyester (D) Polyurethane

Description : __________ is normally used for the manufacture of refrigerator components and transistor parts. (A) Polypropylene (B) Polystyrene (C) Polyester (D) Polyurethane

Last Answer : (B) Polystyrene

In step growth polymerisation, generally only one type of reaction & some basic mechanism is involved. Step growth polymerisation reaction is not involved in the manufacture of (A) Cross linked polystyrene (B) Phenol formaldehyde resins (C) Polyesters (D) Polyamides

Description : In step growth polymerisation, generally only one type of reaction & some basic mechanism is involved. Step growth polymerisation reaction is not involved in the manufacture of (A) Cross linked polystyrene (B) Phenol formaldehyde resins (C) Polyesters (D) Polyamides

Last Answer : (A) Cross linked polystyrene

Benzoyl chloride is not used as a catalyst in the manufacture of (A) Polystyrene (B) Polyvinyl acetate (C) Polypropylene (D) Polyvinyl chloride-co-vinyl acetate

Description : Benzoyl chloride is not used as a catalyst in the manufacture of (A) Polystyrene (B) Polyvinyl acetate (C) Polypropylene (D) Polyvinyl chloride-co-vinyl acetate

Last Answer : (C) Polypropylene

Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Description : Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Last Answer : (D) Polyhexamethylene adipamide

Glyptal used in the manufacture of paints & lacquers is a __________ polymer. (A) Polyamide (B) Polystyrene (C) Polyester (D) Polyacrylonitril

Description : Glyptal used in the manufacture of paints & lacquers is a __________ polymer. (A) Polyamide (B) Polystyrene (C) Polyester (D) Polyacrylonitril

Last Answer : (C) Polyester

Nylon-66 compared to nylon-6 has (A) Lower melting point (B) More abrasion resistant properties (C) Higher hardness (D) All (A), (B) and (C)

Description : Nylon-66 compared to nylon-6 has (A) Lower melting point (B) More abrasion resistant properties (C) Higher hardness (D) All (A), (B) and (C)

Last Answer : (C) Higher hardness

Polyhexamethylene adipamide is also known as (A) Bakelite (B) Nylon-66 (C) Epoxy resin (D) Silicone rubber

Description : Polyhexamethylene adipamide is also known as (A) Bakelite (B) Nylon-66 (C) Epoxy resin (D) Silicone rubber

Last Answer : (B) Nylon-66

Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite

Description : Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite

Last Answer : (B) Teflon

Polycaprolactam is (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon

Description : Polycaprolactam is (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon

Last Answer : (A) Nylon-6

__________ is a homopolymer. (A) Neoprene (B) Bakelite (C) Nylon-66 (D) Terylene

Description : __________ is a homopolymer. (A) Neoprene (B) Bakelite (C) Nylon-66 (D) Terylene

Last Answer : (A) Neoprene

Polycaprolactam is also known as (A) Nylon-66 (B) Nylon-6 (C) Teflon (D) SBR

Description : Polycaprolactam is also known as (A) Nylon-66 (B) Nylon-6 (C) Teflon (D) SBR

Last Answer : (B) Nylon-6

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Polycaprolactam is nothing but (A) Orlon (B) Nylon-66 (C) Nylon-6 (D) Saran

Description : Polycaprolactam is nothing but (A) Orlon (B) Nylon-66 (C) Nylon-6 (D) Saran

Last Answer : (C) Nylon-6

The inter particle forces between linear chains in nylon-66 are __________ bonds. (A) Hydrogen (B) Covalent (C) Ionic (D) None of these

Description : The inter particle forces between linear chains in nylon-66 are __________ bonds. (A) Hydrogen (B) Covalent (C) Ionic (D) None of these

Last Answer : (A) Hydrogen

__________ is a copolymer. (A) Nylon-66 (B) Polypropylene (C) PVC

Description : __________ is a copolymer. (A) Nylon-66 (B) Polypropylene (C) PVC

Last Answer : (A) Nylon-66

Nylon-6 as compared to nylon 66 has lower (A) Abrasion resistance (B) Thermal stability (C) Adhesion to rubber (D) Hardness

Description : Nylon-6 as compared to nylon 66 has lower (A) Abrasion resistance (B) Thermal stability (C) Adhesion to rubber (D) Hardness

Last Answer : (A) Abrasion resistance

Nylon-6 as compared to nylon-66 is (A) Harder (B) More abrasion resistant (C) Having higher melting point (D) None of these

Description : Nylon-6 as compared to nylon-66 is (A) Harder (B) More abrasion resistant (C) Having higher melting point (D) None of these

Last Answer : (D) None of these

Polycaprolactam is commercially known as (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon

Description : Polycaprolactam is commercially known as (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon

Last Answer : (A) Nylon-6

Nylon-66 is so named because the (A) Average degree of polymerisation of the polymer is 1966 (B) Number of carbon atoms between two nitrogen atoms are 6 (C) Number of nitrogen atoms between two carbon atoms are 6 (D) Polymer was first synthesised in 1966

Description : Nylon-66 is so named because the (A) Average degree of polymerisation of the polymer is 1966 (B) Number of carbon atoms between two nitrogen atoms are 6 (C) Number of nitrogen atoms between two carbon atoms are 6 (D) Polymer was first synthesised in 1966

Last Answer : (A) Average degree of polymerisation of the polymer is 1966

P.T.F.E. (Poly tetra fluoro ethylene) is commercially known as (A) Bakelite (B) Neoprene (C) Teflon (D) Nylon-66

Description : P.T.F.E. (Poly tetra fluoro ethylene) is commercially known as (A) Bakelite (B) Neoprene (C) Teflon (D) Nylon-66

Last Answer : (C) Teflon

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Nylon-6 as compared to Nylon-66 is having higher (A) Hardness (B) Abrasion/resistance (C) Melting point (D) None of these

Description : Nylon-6 as compared to Nylon-66 is having higher (A) Hardness (B) Abrasion/resistance (C) Melting point (D) None of these

Last Answer : (D) None of these