Carbon disulphide is mainly used in the production of(A) Viscose rayon
(B) Corundum
(C) Plasticiser for unsaturated polyester
(D) Paints

1 Answer

Answer :

(A) Viscose rayon

Related questions

Description : Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) ... fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Last Answer : (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning

Description : The main use of butadiene is (A) As a plasticiser for unsaturated polyester (B) In the manufacture of synthetic rubber (C) As an anti-skimming agent in paint (D) None of these

Last Answer : (B) In the manufacture of synthetic rubber

Description : Aryl benzene sulphonate (ABS) is a (A) Detergent (B) Plasticiser for unsaturated polyester (C) Starting material for the synthesis of glycerine (D) Coating ingredient for photographic film

Last Answer : (A) Detergent

Description : The major use of butadiene is (A) As a plasticiser for unsaturated polyester (B) In the manufacture of synthetic rubber (C) As an anti-skinning agent in paint (D) None of these

Last Answer : (B) In the manufacture of synthetic rubber

Description : Example of natural plant fibre: a. Silk b. Cotton c. Viscose rayon d. Polyester

Last Answer : b. Cotton

Description : For spinning viscose rayon, the extrusion spinnerettes are made of (A) Platinum or gold alloys (B) High carbon steel (C) Aluminium (D) Nickel

Last Answer : (A) Platinum or gold alloys

Description : Which of the following is not a natural fibre? (A) Silk (B) Viscose rayon (C) Wool (D) Cotton

Last Answer : (B) Viscose rayon

Description : In case of wet spinning of polymers, the polymer solution is forced through spinnerates into, a coagulating bath to give a filament form. Wet spinning is not used in case of the __________ fibres. (A) Viscose rayon (B) Acrylic (C) Polyvinyl acetate (D) Saturated polyeste

Last Answer : (D) Saturated polyeste

Description : Viscose rayon is (A) Cellulose nitrate (B) Regenerated cellulose nitrate (C) Regenerated cellulose acetate (D) None of these

Last Answer : (D) None of these

Description : Viscose rayon (A) Cannot be made from sulphite pulp (B) Utilises H2SO4 , NaOH and CS2 during its manufacture (C) Cannot yield textile grade fibre (D) None of these

Last Answer : (B) Utilises H2SO4 , NaOH and CS2 during its manufacture

Description : In the manufacture of viscose rayon, the raw material used industrially is (A) Eucalyptus wood (B) Bamboo (C) Bagasse (D) Fine teak wood

Last Answer : (D) Fine teak wood

Description : Viscose rayon is chemically (A) Cellulose nitrate (B) Regenerated cellulose nitrate (C) Cellulose acetate (D) Regenerated cellulose acetate

Last Answer : (D) Regenerated cellulose acetate

Description : Viscose rayon is (A) Cellulose nitrate (B) Regenerated cellulose nitrate (C) Regenerated cellulose acetate (D) None of these

Last Answer : (D) None of these

Last Answer : Cotton lintus , bamboo pulp , wood pulp

Last Answer : Viscose rayon regenerated cellulosic fiber. That is to make cellulose cellulose with chemicals again. Some other regenerated fibers are modal , tensile.

Description : A polymeric substance used to make parachute is – (1) Rayon (2) Viscose (3) Cotton (4) Terylene

Last Answer : (2) Viscose Explanation: Viscose is a viscous organic liquid used to make rayon and cellophane. Viscose is also used as shorthand for Viscose Rayon, thus becoming synonymous with rayon, a soft man-made fibre commonly used in dresses, linings shirts, shorts, coats, jackets, and other outer wear.

Description : Retting is used in the processing of which of the following fibres: a. Cotton b. Linen c. Silk d. Viscose rayon

Last Answer : b. Linen

Description : A polymeric substance used to make parachute is (1) Rayon (2) Viscose (3) Cotton (4) Terylene

Last Answer : Viscose

Description : Rayon is a __________ fibre. (A) Cellulosic (B) Polyamide (C) Polyester (D) Natural

Last Answer : (A) Cellulosic

Description : Glyptal used in the manufacture of paints & lacquers is a __________ polymer. (A) Polyamide (B) Polystyrene (C) Polyester (D) Polyacrylonitril

Last Answer : (C) Polyester

Description : Can I get this polyester rayon blend to shrink in the wash?

Last Answer : answer:Polyestere does not shrink. Rayon usually shrinks like crazy. I have a feeling with that ratio the garment won't shrink much, not sure. Throw it in the dryer after you wash it, see what happens. ... a lot, deoending on the rayon, but I doubt that will be a problem with all that polyester.

Description : The first synthetic fibre made by man was- (1) Rayon (2) Nylon (3) Polyester (4) Terycott

Last Answer : (2) Nylon Explanation: Nylon, the first synthetic fiber in the "fully synthetic" sense of that term, was developed by Wallace Carothers, an American researcher at the chemical firm DuPont in the 1930s.

Description : Which of the following is stretched into fibres? (A) Saturated polyester (B) Unsaturated polyester (C) Isoprene (D) Bakelite

Last Answer : (A) Saturated polyester

Description : Contact lenses for eyes are made of Perspex, which is nothing but (A) poly-methyl-methacrylate (B) Polystyrene (C) Unsaturated polyester (D) Polypropylene

Last Answer : (A) poly-methyl-methacrylate

Description : Dacron is a/an (A) Polyester (B) Unsaturated polyester (C) Polyamide (D) Inorganic polyme

Last Answer : (A) Polyeste

Description : Flexible plastic pipes are made of (A) High density polyethylene (HDPE) (B) Low density polyethylene (LDPE) (C) Polypropylene (D) Unsaturated polyester

Last Answer : (B) Low density polyethylene (LDPE)

Description : __________ are produced by reacting polybasic acid (e.g. Phthalic anhydride) with polyhydric alcohol (e.g., glycerol). (A) Unsaturated polyester (B) Alkyd resins (C) Saturated polyester (D) Amino resins

Last Answer : (B) Alkyd resins

Description : The most commonly used resin for making reinforced plastic is (A) Unsaturated polyester (B) Polypropylene

Last Answer : (A) Unsaturated polyester

Description : Dacron is a/an (A) Polyester (B) Unsaturated polyester (C) Polyamide (D) Inorganic polymer

Last Answer : (A) Polyester

Description : A minimum boiling azeotrope is exemplified by (A) Toluene-benzene (B) Acetone-carbon disulphide (C) Water-isobutyl alcohol (D) None of these

Last Answer : (B) Acetone-carbon disulphide

Description : Which of the following binary systems is an example of a maximum boiling azeotrope? (A) Water-hydrochloric acid (B) Acetone-carbon disulphide (C) Water-ethyl alcohol (D) n-heptane-n-octane

Last Answer : (A) Water-hydrochloric acid

Description : Out of the following, TLV of __________ is maximum (about 500 ppm). (A) Carbon dioxide (B) Toluene (C) Carbon disulphide (D) Acetaldehyde

Last Answer : (A) Carbon dioxide

Description : Unreacted core model' represents the reaction involving (A) Combustion of coal particles (B) Roasting of sulphide ores (C) Manufacture of carbon disulphide from elements (D) None of these

Last Answer : (B) Roasting of sulphide ores

Description : Calcareous & argillaceous materials are used in the manufacture of (A) Lead (B) Cement (C) Carbon disulphide (D) None of these

Last Answer : (B) Cement

Description : Which allotrope of sulphur is insoluble in carbon disulphide? (A) Rhombic sulphur (B) Monoclinic sulphur (C) Plastic sulphur (D) Milk of sulphur

Last Answer : (C) Plastic sulphur

Description : Gum formation in stored gasoline is mainly due to the (A) Alkylation of unsaturated (B) Presence of sulphur (C) Oxidation & polymerisation of unsaturated (D) Higher aromatic content

Last Answer : (B) Presence of sulphur

Description : Polyvinyl chloride (PVC) (A) Is produced by Polycondensation reaction (B) Uses either emulsion or suspension polymerisation methods (C) Can be made thermosetting by adding a plasticiser (D) Softening temperature is 200°C

Last Answer : (B) Uses either emulsion or suspension polymerisation methods

Description : Plasticisers are high boiling liquids added to plastic polymers to impart toughness and flexibility at ordinary temperature. Which of the following is not a plasticiser? (A) Ethylene glycol (B) Stearic acid estors (C) Tricresyl phosphate (D) Esters of phthalic acid

Last Answer : (A) Ethylene glycol

Description : Alkyd resin cannot be used for making (A) Plasticiser (B) Paint & varnish (C) Fibres (D) Film forming materials

Last Answer : (C) Fibres

Description : Alkyd resin e.g., glyptal resin formed by Phthalic anhydride and glycerine is not used (A) For surface coating of automobiles & air crafts (B) For fibre making (C) As plasticiser for PVC & nitrocellulose (D) For film forming materials

Last Answer : (B) For fibre making

Description : Margarine is a/an (A) Fat (B) Explosive (C) Plasticiser (D) Rocket propellant

Last Answer : (A) Fat

Description : Pick out the correct combination about the role of various additives used in polymers. (A) Plasticiser: increases the polymer strength (B) Heat stabiliser: increases the maximum service ... property of polymer but increases its weight (D) Lubricants: increases the flexibility of polymers

Last Answer : Option C

Description : The substance used in the production of nylon; rayon; explosives; fertilizers and dyes?

Last Answer : Ammonia

Description : Phenol reacts with bromine in carbon disulphide at low temperature to give

Last Answer : Phenol reacts with bromine in carbon disulphide at low temperature to give A. m-bromophenol B. o-and p ... C. p-bromophenol D. 2, 4,6-tribromophenol

Description : Blood analysis of a patient reveals an unusually high quantity of carboxyhaemoglobin content. Which of the following conclusions is most likely to be correct? The patient has been inhaling polluted air ... content of (a) carbon disulphide (b) chloroform (c) carbon dioxide (d) carbon monoxide.

Last Answer : (d) carbon monoxide.

Description : Bitumen may be dissolved in (A) Carbondioxide (B) Water (C) Sodium chloride (D) Carbon disulphide

Last Answer : Answer: Option D

Description : Which of the following is the hardest material? (A) Calcite (B) Quartz (C) Corundum (D) Gypsum

Last Answer : (C) Corundum

Description : Which of the following is the softest material? (A) Talc (B) Feldspar (C) Corundum (D) Calcite

Last Answer : (A) Talc

Description : The hardest material just prior to diamond in Mho's scale is (A) Topaz (B) Carborundum (C) Corundum (D) Calcite

Last Answer : (C) Corundum

Description : The hardest material just prior to diamond in Mhos scale is (A) Topaz (B) Carborundum (C) Corundum (D) Calcite

Last Answer : (C) Corundum