An ungrounded antenna near the ground A. acts as a single antenna of twice the height B. is unlikely to need an earth mat C. acts as antenna array D. must be horizontally polarized

An ungrounded antenna near the ground
A. acts as a single antenna of twice the height
B. is unlikely to need an earth mat
C. acts as antenna array
D. must be horizontally polarized
by

1 Answer

Answer :

C. acts as antenna array
by

Related questions

Anungrounded antennanearthe ground a. acts as a single antenna of twice the height b. is unlikely to need a ground screen c. acts as anantennaarray d. must be horizontally polarized

Description : Anungrounded antennanearthe ground a. acts as a single antenna of twice the height b. is unlikely to need a ground screen c. acts as anantennaarray d. must be horizontally polarized

Last Answer : c. acts as anantennaarray

The antenna radiates _____ polarized waves when the transmitter antenna is horizontally installed. A. Vertically B. negatively C. horizontally D. circularly

Description : The antenna radiates _____ polarized waves when the transmitter antenna is horizontally installed. A. Vertically B. negatively C. horizontally D. circularly

Last Answer : C. horizontally

A horizontal antenna is _____. A. vertically polarized B. horizontally polarized C. centrally polarized D. circularly polarized

Description : A horizontal antenna is _____. A. vertically polarized B. horizontally polarized C. centrally polarized D. circularly polarized

Last Answer : B. horizontally polarized

A horizontal antenna is A. centrally polarized B. vertically polarized C. horizontally polarized D. perpendicularly polarized

Description : A horizontal antenna is A. centrally polarized B. vertically polarized C. horizontally polarized D. perpendicularly polarized

Last Answer : C. horizontally polarized

When antennas are closed to the ground, _______ polarization is ideal A. horizontally polarized B. vertically polarized C. circularly polarized D. both A and B

Description : When antennas are closed to the ground, _______ polarization is ideal A. horizontally polarized B. vertically polarized C. circularly polarized D. both A and B

Last Answer : B. vertically polarized

One of the following is not a reason for the use of an earth mat A. impossibility of a good ground connection B. provision of an earth for the antenna C. protection of personnel working underneath D. improvement of the radiation pattern of the antenna

Description : One of the following is not a reason for the use of an earth mat A. impossibility of a good ground connection B. provision of an earth for the antenna C. protection of personnel working underneath D. improvement of the radiation pattern of the antenna

Last Answer : C. protection of personnel working underneath

What is meant by referring to electromagnetic waves as horizontally polarized? A. The electric field is parallel to the earth. B. The magnetic field is parallel to the earth. C. Both the electric and magnetic fields are horizontal D. Both the electric and magnetic fields are vertical

Description : What is meant by referring to electromagnetic waves as horizontally polarized? A. The electric field is parallel to the earth. B. The magnetic field is parallel to the earth. C. Both the electric and magnetic fields are horizontal D. Both the electric and magnetic fields are vertical

Last Answer : A. The electric field is parallel to the earth.

What is meant by referring to electromagnetic waves as horizontally polarized? A. The electric field is parallel to the earth B. Both the electric and magnetic fields are vertical C. Both the electric and magnetic fields are horizontal D. The magnetic fields is parallel to the earth

Description : What is meant by referring to electromagnetic waves as horizontally polarized? A. The electric field is parallel to the earth B. Both the electric and magnetic fields are vertical C. Both the electric and magnetic fields are horizontal D. The magnetic fields is parallel to the earth

Last Answer : A. The electric field is parallel to the earth

In what range of frequencies are most omnidirectional horizontally polarized antennas used? A. VHF, UHF B. VLF, LF C. SH, EHF D. MF, HF

Description : In what range of frequencies are most omnidirectional horizontally polarized antennas used? A. VHF, UHF B. VLF, LF C. SH, EHF D. MF, HF

Last Answer : A. VHF, UHF

What is a device that detects both vertically and horizontally polarized signals simultaneously? A. Orthomode transducer B. Crystal detector C. Optoisolator D. Isomode detector

Description : What is a device that detects both vertically and horizontally polarized signals simultaneously? A. Orthomode transducer B. Crystal detector C. Optoisolator D. Isomode detector

Last Answer : A. Orthomode transducer

An electromagnetic wave is ________ polarized when the electric field lies wholly in one plane containing the direction of propagation. A. Horizontally B. Linearly C. Circularly D. Vertically

Description : An electromagnetic wave is ________ polarized when the electric field lies wholly in one plane containing the direction of propagation. A. Horizontally B. Linearly C. Circularly D. Vertically

Last Answer : B. Linearly

______ is a device that detects both vertically and horizontally polarized signals simultaneously. A. Crystal B. Orthomode transducer C. Light transducer D. Optoisolator

Description : ______ is a device that detects both vertically and horizontally polarized signals simultaneously. A. Crystal B. Orthomode transducer C. Light transducer D. Optoisolator

Last Answer : B. Orthomode transducer

When a transmission line uses ground return, it is called a/an __________ line. A. ungrounded B. balanced C. unbalanced D. grounded

Description : When a transmission line uses ground return, it is called a/an __________ line. A. ungrounded B. balanced C. unbalanced D. grounded

Last Answer : C. unbalanced

If the current ratios of the two or more elements must be held 5% and the phase angle to 3° the antenna is called a A. end fire array B. critical phased array C. broadband array D. wideband array

Description : If the current ratios of the two or more elements must be held 5% and the phase angle to 3° the antenna is called a A. end fire array B. critical phased array C. broadband array D. wideband array

Last Answer : B. critical phased array

What is the gain of four identically polarized antennas stacked one above the other and fed in phase? A. 3 dB over the gain of one antenna B. 10 dB over the gain of one antenna C. 4 dB over the gain of one antenna D. 6 dB over the gain of one antenna

Description : What is the gain of four identically polarized antennas stacked one above the other and fed in phase? A. 3 dB over the gain of one antenna B. 10 dB over the gain of one antenna C. 4 dB over the gain of one antenna D. 6 dB over the gain of one antenna

Last Answer : D. 6 dB over the gain of one antenna

A theoretical reference antenna that provides a comparison for antenna measurements. A. Marconi antenna B. Isotropic radiator C. Yagi-Uda array D. Whip antenna

Description : A theoretical reference antenna that provides a comparison for antenna measurements. A. Marconi antenna B. Isotropic radiator C. Yagi-Uda array D. Whip antenna

Last Answer : B. Isotropic radiator

______ is an antenna array which is highly directional at right angles to the plane of the array? A. Broadside array B. End-fire array C. Turnstile array D. Log-periodic array

Description : ______ is an antenna array which is highly directional at right angles to the plane of the array? A. Broadside array B. End-fire array C. Turnstile array D. Log-periodic array

Last Answer : A. Broadside array

In order to get maximum radiation to all surrounding points in the horizontal plane, the antenna used is a A. vertical loop B. vertical quarter-wavelength rod C. array which includes parasitic elements D. a horizontal Hertz dipole

Description : In order to get maximum radiation to all surrounding points in the horizontal plane, the antenna used is a A. vertical loop B. vertical quarter-wavelength rod C. array which includes parasitic elements D. a horizontal Hertz dipole

Last Answer : B. vertical quarter-wavelength rod

_____ is an antenna with a number of half-wave antenna on it. A. Antenna array B. Tower C. Omni-directional D. Rhombic

Description : _____ is an antenna with a number of half-wave antenna on it. A. Antenna array B. Tower C. Omni-directional D. Rhombic

Last Answer : A. Antenna array

Which is a non-resonant antenna? A. Rhombic antenna B. Folded dipole C. End-fire array D. Yagi-Uda antenna

Description : Which is a non-resonant antenna? A. Rhombic antenna B. Folded dipole C. End-fire array D. Yagi-Uda antenna

Last Answer : A. Rhombic antenna

What circuit is responsible in activating and deactivating adjacent antenna elements in a mobile satellite array? A. Radial divider B. Divider/combiner C. Radial combiner D. Radial multiplexer

Description : What circuit is responsible in activating and deactivating adjacent antenna elements in a mobile satellite array? A. Radial divider B. Divider/combiner C. Radial combiner D. Radial multiplexer

Last Answer : A. Radial divider

In a typical mobile satellite array antenna if three elements are activated, how many elements are deactivated? A. 3 B. 11 C. 5 D. 9

Description : In a typical mobile satellite array antenna if three elements are activated, how many elements are deactivated? A. 3 B. 11 C. 5 D. 9

Last Answer : B. 11

The reflector and director of an antenna array are considered as A. Parasitic elements B. Transcendental elements C. Feed-points D. Driven elements

Description : The reflector and director of an antenna array are considered as A. Parasitic elements B. Transcendental elements C. Feed-points D. Driven elements

Last Answer : A. Parasitic elements

Which is the non-resonant antenna? A. Broadside Antenna B. Folded Dipole C. Rhombic antenna D. End fire array

Description : Which is the non-resonant antenna? A. Broadside Antenna B. Folded Dipole C. Rhombic antenna D. End fire array

Last Answer : C. Rhombic antenna

A type of array antenna which consists of one half-wave driven dipole, one reflector and one director A. Hertzian dipole B. Yagi-uda C. Broadside collinear D. Log periodic dipole array

Description : A type of array antenna which consists of one half-wave driven dipole, one reflector and one director A. Hertzian dipole B. Yagi-uda C. Broadside collinear D. Log periodic dipole array

Last Answer : B. Yagi-uda

It consists of a number of dipoles of equal size, equally spaced along a straight line with all dipoles fed in the same phase from the same source. A. Log-periodic antenna B. Yagi antenna C. End-fire array D. Broadside array

Description : It consists of a number of dipoles of equal size, equally spaced along a straight line with all dipoles fed in the same phase from the same source. A. Log-periodic antenna B. Yagi antenna C. End-fire array D. Broadside array

Last Answer : D. Broadside array

If a transmitting antenna is placed close to the ground, how should the antenna be polarized to give the greatest signal strength?

Description : If a transmitting antenna is placed close to the ground, how should the antenna be polarized to give the greatest signal strength?

Last Answer : Vertically polarized.

The angle of elevation of the antenna beam is 20°. Calculate the transmission-path distance for an ionospheric transmission that utilizes a layer of virtual height 200 km. Use flat-earth approximation. A. 966 km B. 2100 km C. 1100 km D. 405 km

Description : The angle of elevation of the antenna beam is 20°. Calculate the transmission-path distance for an ionospheric transmission that utilizes a layer of virtual height 200 km. Use flat-earth approximation. A. 966 km B. 2100 km C. 1100 km D. 405 km

Last Answer : C. 1100 km

Indicate which of the following reasons for using metal counterpoise with antennas is false. A. Impossibly of a good ground connection B. Protection of personnel working underneath C. Provision of an earth for the antenna D. Rockiness of the ground itself

Description : Indicate which of the following reasons for using metal counterpoise with antennas is false. A. Impossibly of a good ground connection B. Protection of personnel working underneath C. Provision of an earth for the antenna D. Rockiness of the ground itself

Last Answer : B. Protection of personnel working underneath

A disadvantage of using a trap antenna. A. It will radiate harmonics B. It can only be used for single-bad operation C. It is too sharply directional at lower frequencies D. It must be neutralized

Description : A disadvantage of using a trap antenna. A. It will radiate harmonics B. It can only be used for single-bad operation C. It is too sharply directional at lower frequencies D. It must be neutralized

Last Answer : A. It will radiate harmonics

The reddish hue of the Sun at sunset is due to the fact that (a) Sunlight is polarized horizontally when scattered by molecules of the atmosphere (b) Light of short wavelength is scattered more effectively by the atmosphere than light of long wavelength (c) Light of short wavelength is scattered less effectively than light of long wavelength (d) Sunlight is polarized vertically when scattered by molecules of the atmosphere

Description : The reddish hue of the Sun at sunset is due to the fact that (a) Sunlight is polarized horizontally when scattered by molecules of the atmosphere (b) Light of short wavelength is ... than light of long wavelength (d) Sunlight is polarized vertically when scattered by molecules of the atmosphere

Last Answer : Ans:(b)

Why grounding mat is important near ground switch operating handle and disconnecting switch operating handle?

Description : Why grounding mat is important near ground switch operating handle and disconnecting switch operating handle?

Last Answer : Equipment operating handles deserve special attention because of the higher probability for co-incidence of adverse factors. For example, a. Hand operation equipment such as grounding switches and disconnecting ... both in order to bring down the values of touch potential and step potential.  

For a shortened vertical antenna, where should a loading coil be placed to minimize losses and produce the most effective performance? A. As low as possible on the vertical radiator B. Near the center of the vertical radiator C. As close to the transmitter as possible D. At a voltage node

Description : For a shortened vertical antenna, where should a loading coil be placed to minimize losses and produce the most effective performance? A. As low as possible on the vertical radiator B. Near the center of the vertical radiator C. As close to the transmitter as possible D. At a voltage node

Last Answer : B. Near the center of the vertical radiator

Where the voltage node of a half-wave antenna does exists? A. At feed point B. Near the center C. At center D. Near the feed point

Description : Where the voltage node of a half-wave antenna does exists? A. At feed point B. Near the center C. At center D. Near the feed point

Last Answer : A. At feed point

Known as the technique for adding a series inductor at or near the center of an antenna element in order to cancel the capacitive reactance of an antenna. A. Dipole B. Center loading C. Reflector D. loading coil

Description : Known as the technique for adding a series inductor at or near the center of an antenna element in order to cancel the capacitive reactance of an antenna. A. Dipole B. Center loading C. Reflector D. loading coil

Last Answer : D. loading coil

Where do the maximum current and minimum voltage values on a resonant Hertz dipole exist? A. Center of the antenna B. Near the end of the antenna C. Near the center of the antenna D. Ends of the antenna

Description : Where do the maximum current and minimum voltage values on a resonant Hertz dipole exist? A. Center of the antenna B. Near the end of the antenna C. Near the center of the antenna D. Ends of the antenna

Last Answer : A. Center of the antenna

A man lifts a stone weighting 300 g from the ground to a height of 2m and throws it horizontally with a velocity of 6 m/sec. The work done by the man is a.7.686 J b.11.286 J c.5.886 J d.8.343 J e.Tapered bearing

Description : A man lifts a stone weighting 300 g from the ground to a height of 2m and throws it horizontally with a velocity of 6 m/sec. The work done by the man is a.7.686 J b.11.286 J c.5.886 J d.8.343 J e.Tapered bearing

Last Answer : b. 11.286 J

Factors that determine the radiation resistance of an antenna A. Transmission line length and height of antenna B. The location of the antenna with respect to nearby objects C. It is a constant for all antennas since it is physical D. Sunspot activity and the time of day

Description : Factors that determine the radiation resistance of an antenna A. Transmission line length and height of antenna B. The location of the antenna with respect to nearby objects C. It is a constant for all antennas since it is physical D. Sunspot activity and the time of day

Last Answer : B. The location of the antenna with respect to nearby objects

Actual height of antenna should be at least A. one wavelength B. half wavelength C. quarter wavelength D. three-fourth wavelength

Description : Actual height of antenna should be at least A. one wavelength B. half wavelength C. quarter wavelength D. three-fourth wavelength

Last Answer : C. quarter wavelength

Top loading is used in an antenna in order to increase its ______. A. practical height B. beamwidth C. effective height D. input capacitance

Description : Top loading is used in an antenna in order to increase its ______. A. practical height B. beamwidth C. effective height D. input capacitance

Last Answer : C. effective height

For a space wave transmission, the radio horizon distance of a receiving antenna with a height of 64 meters is approximately A. 8 km B. 32 km C. 64 km D. 256 km

Description : For a space wave transmission, the radio horizon distance of a receiving antenna with a height of 64 meters is approximately A. 8 km B. 32 km C. 64 km D. 256 km

Last Answer : B. 32 km

The antenna effective height is ____ to ____ of the actual height. A. ½ to 2/3 B. ½ to ¾ C. ¼ to 2/3 D. ¼ to ¾

Description : The antenna effective height is ____ to ____ of the actual height. A. ½ to 2/3 B. ½ to ¾ C. ¼ to 2/3 D. ¼ to ¾

Last Answer : A. ½ to 2/3

A receiver is located 64 km from a space wave transmitting antenna that is 100 meters high. Find the required height of the receiving antenna. A. 36 meters high B. 64 meters high C. 100 meters high D. 182.25 meters high

Description : A receiver is located 64 km from a space wave transmitting antenna that is 100 meters high. Find the required height of the receiving antenna. A. 36 meters high B. 64 meters high C. 100 meters high D. 182.25 meters high

Last Answer : A. 36 meters high

For a space wave transmission, the radio horizon distance of a transmitting antenna with a height of 100 meters is approximately:A. 10 km B. 40 km C. 100 km D. 400 km

Description : For a space wave transmission, the radio horizon distance of a transmitting antenna with a height of 100 meters is approximately: A. 10 km B. 40 km C. 100 km D. 400 km

Last Answer : B. 40 km

One of the following prevents a transmitter from emitting a signal that interferes with other stations on frequency during the test. A. Use of low height antenna B. Use of grounded antenna C. Use of dummy antenna D. Use of shielded antenna radiator

Description : One of the following prevents a transmitter from emitting a signal that interferes with other stations on frequency during the test. A. Use of low height antenna B. Use of grounded antenna C. Use of dummy antenna D. Use of shielded antenna radiator

Last Answer : C. Use of dummy antenna

The advantage of periscope antenna in microwave A. Minimize interference to and from other neighboring stations B. Shorten waveguide link C. Reduce tower height D. All of these

Description : The advantage of periscope antenna in microwave A. Minimize interference to and from other neighboring stations B. Shorten waveguide link C. Reduce tower height D. All of these

Last Answer : B. Shorten waveguide link

Top loading is used in an antenna in order to increase its ___________. A. input capacitance B. beamwidth C. bandwidth D. effective height

Description : Top loading is used in an antenna in order to increase its ___________. A. input capacitance B. beamwidth C. bandwidth D. effective height

Last Answer : D. effective height

Which of the following represents a characteristic of an ungrounded electrical distribution system? A. Accidental contact between one line and ground does not cause an outage. B. Double ground faults on different phases will not cause an outage. C. Ground detection systems are unnecessary. D. Accidental contact between one line and ground will always cause an outage.

Description : Which of the following represents a characteristic of an ungrounded electrical distribution system? A. Accidental contact between one line and ground does not cause an outage. B. Double ground faults on ... unnecessary. D. Accidental contact between one line and ground will always cause an outage.

Last Answer : Answer: A

Which of the following statements is correct concerning the circuits in a sound powered telephone system? A. The ringing circuit is composed of only one common wire to ground. B. The common talking circuit is composed of two ungrounded wires. C. The ringing circuit has two grounded wires connected to each station. D. The talking and calling circuits are electrically dependent upon each other.

Description : Which of the following statements is correct concerning the circuits in a sound powered telephone system? A. The ringing circuit is composed of only one common wire to ground. B. The common ... connected to each station. D. The talking and calling circuits are electrically dependent upon each other.

Last Answer : Answer: B