The different angles of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitter is known as ________. A. refraction B. sensor C. mode D. emitter

The different angles of entry of light into an optical fiber when the diameter of the core is
many times the wavelength of the light transmitter is known as ________.
A. refraction
B. sensor
C. mode
D. emitter
by

1 Answer

Answer :

C. mode
by

Related questions

Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. a. Acceptance angle b. Modes c. Sensors d. Aperture

Description : Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. a. Acceptance angle b. Modes c. Sensors d. Aperture

Last Answer : b. Modes

Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. ∙ a. Acceptance angle ∙ b. Modes ∙ c. Sensors ∙ d. Aperture

Description : Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. ∙ a. Acceptance angle ∙ b. Modes ∙ c. Sensors ∙ d. Aperture

Last Answer : b. Modes

The core of the optical fiber has ______. A. A medium index of refraction B. A lower index of refraction than the cladding C. A lower index of refraction than air D. A higher index of refraction than the cladding

Description : The core of the optical fiber has ______. A. A medium index of refraction B. A lower index of refraction than the cladding C. A lower index of refraction than air D. A higher index of refraction than the cladding

Last Answer : D. A higher index of refraction than the cladding

________ dispersion is caused by the difference in the propagation times of light rays that take different paths down a fiber. a. Material dispersion b. Wavelength dispersion c. Modal dispersion d. Delay dispersion

Description : ________ dispersion is caused by the difference in the propagation times of light rays that take different paths down a fiber. a. Material dispersion b. Wavelength dispersion c. Modal dispersion d. Delay dispersion

Last Answer : c. Modal dispersion

A single mode optical fiber has a core diameter of _____ nm. ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.2 ∙ d. 0.05

Description : A single mode optical fiber has a core diameter of _____ nm. ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.2 ∙ d. 0.05

Last Answer : a. 0.1

What is a specific path the light takes in an optical fiber corresponding to a certain angle and number of reflection a. Mode b. Grade c. Numerical Aperture d. Dispersion

Description : What is a specific path the light takes in an optical fiber corresponding to a certain angle and number of reflection a. Mode b. Grade c. Numerical Aperture d. Dispersion

Last Answer : a. Mode

Which of the following is used as an optical transmitter on the Fiber Optical Communications? a. APD b. LSA diode c. PIN diode d. LED

Description : Which of the following is used as an optical transmitter on the Fiber Optical Communications? a. APD b. LSA diode c. PIN diode d. LED

Last Answer : d. LED

The core of an optical fiber has a a. Lower refracted index than air b. Lower refractive index than the cladding c. Higher refractive index than the cladding d. Similar refractive index with the cladding

Description : The core of an optical fiber has a a. Lower refracted index than air b. Lower refractive index than the cladding c. Higher refractive index than the cladding d. Similar refractive index with the cladding

Last Answer : c. Higher refractive index than the cladding

What is the insertion loss of connector type splices for a single mode optical fiber? A. 0.51 dB B. 0.49 dB C. 0.31 dB D. 0.38 db

Description : What is the insertion loss of connector type splices for a single mode optical fiber? A. 0.51 dB B. 0.49 dB C. 0.31 dB D. 0.38 db

Last Answer : D. 0.38 db

A mode filter is a device that attenuates specific modes propagating in the core of an optical fiber. What mode propagating along single mode fibers do mode filters eliminate?

Description : A mode filter is a device that attenuates specific modes propagating in the core of an optical fiber. What mode propagating along single mode fibers do mode filters eliminate?

Last Answer : Second-order mode.

A type of index of an optical fiber that has no cladding and whose central core has a non-uniform refractive index. ∙ A. graded index ∙ B. multimode ∙ C. single mode ∙ D. step-index

Description : A type of index of an optical fiber that has no cladding and whose central core has a non-uniform refractive index. ∙ A. graded index ∙ B. multimode ∙ C. single mode ∙ D. step-index

Last Answer : ∙ A. graded index

A type of index profile of an optical fiber that has a central core and outside cladding with a uniform refractive index ∙ A. multimode ∙ B. graded index ∙ C. step-index ∙ D. single mode

Description : A type of index profile of an optical fiber that has a central core and outside cladding with a uniform refractive index ∙ A. multimode ∙ B. graded index ∙ C. step-index ∙ D. single mode

Last Answer : ∙ C. step-index

The graded-index multimode optical fiber has a core diameter of _____ nm. ∙ a. 0.5 ∙ b. 0.05 ∙ c. 0.0005 ∙ d. 5

Description : The graded-index multimode optical fiber has a core diameter of _____ nm. ∙ a. 0.5 ∙ b. 0.05 ∙ c. 0.0005 ∙ d. 5

Last Answer : ∙ a. 0.5

A step-index multimode optical fiber has a core diameter of _____ nm. ∙ a. 0.02 ∙ b. 0.2 ∙ c. 2 ∙ d. 0.002

Description : A step-index multimode optical fiber has a core diameter of _____ nm. ∙ a. 0.02 ∙ b. 0.2 ∙ c. 2 ∙ d. 0.002

Last Answer : b. 0.2

The index of refraction measures the speed of light in an optical fiber. Will light travel faster in an optically dense material or in one that is less dense?

Description : The index of refraction measures the speed of light in an optical fiber. Will light travel faster in an optically dense material or in one that is less dense?

Last Answer : Light will travel faster in an optical material that is less dense.

A popular light wavelength in fiber-optic cable is a. 0.7 um b. 1.3 um c. 1.5 um d. 1.8 um

Description : A popular light wavelength in fiber-optic cable is a. 0.7 um b. 1.3 um c. 1.5 um d. 1.8 um

Last Answer : b. 1.3 um

What law does a light traveling in air optical fiber follow? A. Millman B. Snell’s C. Maxwell D. Huygen

Description : What law does a light traveling in air optical fiber follow? A. Millman B. Snell’s C. Maxwell D. Huygen

Last Answer : B. Snell’s

A device that reduces the intensity of light in fiber optics communication systems. A. Reducer B. Quality factor C. Optical attenuator D. Compressor

Description : A device that reduces the intensity of light in fiber optics communication systems. A. Reducer B. Quality factor C. Optical attenuator D. Compressor

Last Answer : C. Optical attenuator

Light rays that are emitted simultaneously from an LED and propagated down an optical fiber do not arrive at the far end of the fiber at the same time results to ∙ A. intramodal dispersion ∙ B. pulse length dispersion ∙ C. modal dispersion ∙ D. wavelength dispersion

Description : Light rays that are emitted simultaneously from an LED and propagated down an optical fiber do not arrive at the far end of the fiber at the same time results to ∙ A. intramodal dispersion ∙ B. pulse length dispersion ∙ C. modal dispersion ∙ D. wavelength dispersion

Last Answer : D. wavelength dispersion

The operation of the fiber-optic cable is based on the principle of a. Refraction b. Reflection c. Dispersion d. Absorption

Description : The operation of the fiber-optic cable is based on the principle of a. Refraction b. Reflection c. Dispersion d. Absorption

Last Answer : b. Reflection

What is the device used in fiber optic communication which consist of a receiver transmitter use to clean up and amplify digital data moving in one direction and another in the opposite direction? A. Optic compressors B. Optic retarders C. Optic isolator D. Optic regenerators

Description : What is the device used in fiber optic communication which consist of a receiver transmitter use to clean up and amplify digital data moving in one direction and another in the opposite direction? A. Optic compressors B. Optic retarders C. Optic isolator D. Optic regenerators

Last Answer : D. Optic regenerators

A simple half-wavelength antenna radiates the strongest signal A. at 45 degrees to its axis B. parallel to its axis C. at right angles to its axis D. at 60 degrees to its axis

Description : A simple half-wavelength antenna radiates the strongest signal A. at 45 degrees to its axis B. parallel to its axis C. at right angles to its axis D. at 60 degrees to its axis

Last Answer : C. at right angles to its axis

________ generates light beam at a specific visible frequency. A. Glass fiber B. Infrared C. Light waves D. Laser

Description : ________ generates light beam at a specific visible frequency. A. Glass fiber B. Infrared C. Light waves D. Laser

Last Answer : D. Laser

A light ray incident on the optical fiber core is propagated along the fiber. Is the angle of incidence of the light ray entering the fiber larger or smaller than the acceptance angle

Description : A light ray incident on the optical fiber core is propagated along the fiber. Is the angle of incidence of the light ray entering the fiber larger or smaller than the acceptance angle

Last Answer : Smaller.

The claddingwhichsurroundsthe fiber core a. is used to reduce optical interference b. is used to protect the fiber c. acts to help guide the light in the core d. ensures that the refractive index remains constant

Description : The claddingwhichsurroundsthe fiber core a. is used to reduce optical interference b. is used to protect the fiber c. acts to help guide the light in the core d. ensures that the refractive index remains constant

Last Answer : c. acts to help guide the light in the core

Light is confined within the core of a simple optical fiber by:

Description : Light is confined within the core of a simple optical fiber by:  (1) Refraction. (2) Total internal reflection at the outer edge of the cladding. (3) Total internal reflection at the core cladding boundary. (4) Reflection from the fiber's plastic coating.

Last Answer : Light is confined within the core of a simple optical fiber by: Total internal reflection at the core cladding boundary. 

Modal dispersion is caused by the ∙ a. Dependence of wavelength on index of refraction ∙ b. Dependence of propagation constant on index of refraction ∙ c. Dependence of the propagation constant on the wavelength ∙ d. Dependence of the propagation constant on the mode number

Description : Modal dispersion is caused by the ∙ a. Dependence of wavelength on index of refraction ∙ b. Dependence of propagation constant on index of refraction ∙ c. Dependence of the propagation constant on the wavelength ∙ d. Dependence of the propagation constant on the mode number

Last Answer : d. Dependence of the propagation constant on the mode number

Material dispersion is caused by the ∙ a. Wavelength dependence of the index of refraction ∙ b. Wavelength independence of the index of refraction ∙ c. Dependence of the propagation constant on the mode number ∙ d. Independence of the propagation constant on the mode number

Description : Material dispersion is caused by the ∙ a. Wavelength dependence of the index of refraction ∙ b. Wavelength independence of the index of refraction ∙ c. Dependence of the propagation constant on the mode number ∙ d. Independence of the propagation constant on the mode number

Last Answer : d. Independence of the propagation constant on the mode number

A basic touch screen has three main components. It includes touch sensor, controller and ________ A. transmitter B. receiver C. software driver D. None of the Above

Description : A basic touch screen has three main components. It includes touch sensor, controller and ________ A. transmitter B. receiver C. software driver D. None of the Above

Last Answer : C. software driver

What is a specific path the light takes in an optical fiber corresponding to a certain angle and number of reflection ∙ a. Mode ∙ b. Grade ∙ c. Numerical Aperture ∙ d. Dispersion

Description : What is a specific path the light takes in an optical fiber corresponding to a certain angle and number of reflection ∙ a. Mode ∙ b. Grade ∙ c. Numerical Aperture ∙ d. Dispersion

Last Answer : a. Mode

The speed of light through a single-mode optical fiber is approximately: w) c (equal to 3 x 108 m/s) x) 70 percent of c y) 80 percent of c z) 90 percent of c

Description : The speed of light through a single-mode optical fiber is approximately: w) c (equal to 3 x 108 m/s) x) 70 percent of c y) 80 percent of c z) 90 percent of c

Last Answer : ANSWER: X -- 70 PERCENT OF c

Optical fibers for telecommunications are typically about _____ mils thick and consists of a glass core, a glass cladding of lower index of refraction, and a protective coating ∙ a. 5 ∙ b. 6 ∙ c. 7 ∙ d. 8

Description : Optical fibers for telecommunications are typically about _____ mils thick and consists of a glass core, a glass cladding of lower index of refraction, and a protective coating ∙ a. 5 ∙ b. 6 ∙ c. 7 ∙ d. 8

Last Answer : ∙ a. 5

Noise always affects the signal in a communications systems at the ________. A. transmitter B. channel C. information source D. destination

Description : Noise always affects the signal in a communications systems at the ________. A. transmitter B. channel C. information source D. destination

Last Answer : B. channel

Optical fiber works on the A. principle of refraction B. total internal reflection C. scattering D. interference

Description : Optical fiber works on the A. principle of refraction B. total internal reflection C. scattering D. interference

Last Answer : B. total internal reflection

Which part of a fiber optic transmitter converts the processed electrical signal to an optical signal?

Description : Which part of a fiber optic transmitter converts the processed electrical signal to an optical signal?

Last Answer : The optical source.

How do you transmit through multiplexing, a thousand of voice channel information over a single fiber optic using on e wavelength? A. Polar division B. Time division C. Fiber division D. Frequency division

Description : How do you transmit through multiplexing, a thousand of voice channel information over a single fiber optic using on e wavelength? A. Polar division B. Time division C. Fiber division D. Frequency division

Last Answer : B. Time division

A quarter wavelength devices made of crystalline calcite that changes polarization in the optic fiber communication. A. Isolator B. Retarder C. Polarizer D. Filters

Description : A quarter wavelength devices made of crystalline calcite that changes polarization in the optic fiber communication. A. Isolator B. Retarder C. Polarizer D. Filters

Last Answer : B. Retarder

What are electromagnetic waves? A. Alternating currents in the core of an electromagnet B. A wave consisting of two electric fields at right angles to each other C. A wave consisting of an electric field and a magnetic field at right angles to each other D. A wave consisting of two magnetic fields at right angles to each other

Description : What are electromagnetic waves? A. Alternating currents in the core of an electromagnet B. A wave consisting of two electric fields at right angles to each other C. A wave consisting of an electric field ... to each other D. A wave consisting of two magnetic fields at right angles to each other

Last Answer : C. A wave consisting of an electric field and a magnetic field at right angles to each other

What are electromagnetic waves? A. A wave consisting of two magnetic fields at right angles to each other B. A wave consisting of an electric field and a magnetic field at right angles to each other. C. Alternating currents in the core of an electromagnet D. A wave consisting of two electric fields at right angles to each other

Description : What are electromagnetic waves? A. A wave consisting of two magnetic fields at right angles to each other B. A wave consisting of an electric field and a magnetic field at right angles to each ... core of an electromagnet D. A wave consisting of two electric fields at right angles to each other

Last Answer : B. A wave consisting of an electric field and a magnetic field at right angles to each other.

In a fiber-optic cable, the signal is propagatedalong theinner core by _______. A) reflection B) refraction C) modulation D) none of the above

Description : In a fiber-optic cable, the signal is propagatedalong theinner core by _______. A) reflection B) refraction C) modulation D) none of the above

Last Answer : reflection

Which of the following is used as an optical receiver in fiber optics communications a. APD b. Tunnel diode c. Laser diode d. LED

Description : Which of the following is used as an optical receiver in fiber optics communications a. APD b. Tunnel diode c. Laser diode d. LED

Last Answer : a. APD

The bandwidth of optical fiber a. 900MHz b. 900PHz c. 900THz d. 900EHz

Description : The bandwidth of optical fiber a. 900MHz b. 900PHz c. 900THz d. 900EHz

Last Answer : c. 900THz

______ dispersion is caused by the difference in the propagation times of light rays that take different paths down a fiber. ∙ a. Material dispersion ∙ b. Wavelength dispersion ∙ c. Modal dispersion

Description : ______ dispersion is caused by the difference in the propagation times of light rays that take different paths down a fiber. ∙ a. Material dispersion ∙ b. Wavelength dispersion ∙ c. Modal dispersion

Last Answer : ∙ c. Modal dispersion

The core of a fiber optic is surrounded by a. Wire braid shield b. Kevlar c. Cladding d. Plastic insulation

Description : The core of a fiber optic is surrounded by a. Wire braid shield b. Kevlar c. Cladding d. Plastic insulation

Last Answer : c. Cladding

The core of a fiber optic cable is made of a. Air b. Glass c. Diamond d. Quartz

Description : The core of a fiber optic cable is made of a. Air b. Glass c. Diamond d. Quartz

Last Answer : b. Glass

The inner portion of the fiber cable is called a. Cladding b. Coating c. Inner conductor d. Core

Description : The inner portion of the fiber cable is called a. Cladding b. Coating c. Inner conductor d. Core

Last Answer : d. Core

EMD is best described by which statement? ∙ A. 70 percent of the core diameter and 70% of the fiber NA should be filled with light. ∙ B. 70 percent of the fiber diameter and 70% of the cone of acceptance should be filled with light. ∙ C. 70 percent of input light should be measured at the output. ∙ D. 70 percent of the unwanted wavelengths should be attenuated by the fiber.

Description : EMD is best described by which statement? ∙ A. 70 percent of the core diameter and 70% of the fiber NA should be filled with light. ∙ B. 70 percent of the fiber diameter and 70% of the ... be measured at the output. ∙ D. 70 percent of the unwanted wavelengths should be attenuated by the fiber.

Last Answer : 70 percent of the core diameter and 70% of the fiber NA should be filled with light.

Which type of fiber-optic cable is the best for very high speed data? a. Single-mode step-index b. Multimode step-index c. Single-mode graded-index d. Multimode graded-index

Description : Which type of fiber-optic cable is the best for very high speed data? a. Single-mode step-index b. Multimode step-index c. Single-mode graded-index d. Multimode graded-index

Last Answer : a. Single-mode step-index