_______ is the transmission of sound from one room to an adjacent room thru common walls, floors or ceilings. A. Reverberation B. Refraction C. Flanking transmission D. Reflection

_______ is the transmission of sound from one room to an adjacent room thru common
walls, floors or ceilings.
A. Reverberation
B. Refraction
C. Flanking transmission
D. Reflection
by

1 Answer

Answer :

C. Flanking transmission
by

Related questions

In acoustics, _____ is the apparent change in frequency or pitch when a sound source moves either toward or away from a listener. A. flanking B. reverberation C. Doppler effect D. echo

Description : In acoustics, _____ is the apparent change in frequency or pitch when a sound source moves either toward or away from a listener. A. flanking B. reverberation C. Doppler effect D. echo

Last Answer : C. Doppler effect

What do you call the perceptible sound repetition? A. Reverberation B. Echo C. Reflection D. Masking

Description : What do you call the perceptible sound repetition? A. Reverberation B. Echo C. Reflection D. Masking

Last Answer : B. Echo

Calculate the reverberation time of a living room 8 ft high, 13 ft wide and 20 ft long. The total absorption of the building structure inside the room is 180.7 sabines with four persons present in the room. A. 0.5 ms B. 0.05 s C. 0.5 s D. 5 ms

Description : Calculate the reverberation time of a living room 8 ft high, 13 ft wide and 20 ft long. The total absorption of the building structure inside the room is 180.7 sabines with four persons present in the room. A. 0.5 ms B. 0.05 s C. 0.5 s D. 5 ms

Last Answer : C. 0.5 s

The tendency of the sound energy to spread. A. Rarefaction B. Reflection C. Refraction D. Diffraction

Description : The tendency of the sound energy to spread. A. Rarefaction B. Reflection C. Refraction D. Diffraction

Last Answer : D. Diffraction

Tendency of sound energy to spread. A. Reflection B. Diffraction C. Rarefaction D. Refraction

Description : Tendency of sound energy to spread. A. Reflection B. Diffraction C. Rarefaction D. Refraction

Last Answer : B. Diffraction

Which of the following is NOT an acoustical defect to be avoided in acoustical designs? A. Reverberation B. Flutter echo C. Distortion D. Sound concentration

Description : Which of the following is NOT an acoustical defect to be avoided in acoustical designs? A. Reverberation B. Flutter echo C. Distortion D. Sound concentration

Last Answer : A. Reverberation

The ratio of speed of light in air to the speed of light in another substance is called the a. Speed factor b. Index of reflection c. Index of refraction d. Dielectric constant

Description : The ratio of speed of light in air to the speed of light in another substance is called the a. Speed factor b. Index of reflection c. Index of refraction d. Dielectric constant

Last Answer : c. Index of refraction

Refraction is the a. Bending of light waves b. Reflection of light waves c. Distortion of light waves d. Diffusion of light waves

Description : Refraction is the a. Bending of light waves b. Reflection of light waves c. Distortion of light waves d. Diffusion of light waves

Last Answer : a. Bending of light waves

The operation of the fiber-optic cable is based on the principle of a. Refraction b. Reflection c. Dispersion d. Absorption

Description : The operation of the fiber-optic cable is based on the principle of a. Refraction b. Reflection c. Dispersion d. Absorption

Last Answer : b. Reflection

Longitudinal waves do not exhibit a. Polarization b. Refraction c. Reflection d. Diffraction

Description : Longitudinal waves do not exhibit a. Polarization b. Refraction c. Reflection d. Diffraction

Last Answer : a. Polarization

What phenomenon causes the radio-path horizon distance to exceed the geometric horizon? A. Diffraction B. Ducting C. Reflection D. Refraction

Description : What phenomenon causes the radio-path horizon distance to exceed the geometric horizon? A. Diffraction B. Ducting C. Reflection D. Refraction

Last Answer : D. Refraction

Which of the following phenomena is possible is free space medium? A. Reflection of radio wave B. Diffraction of radio wave C. Refraction of radio wave D. Attenuation of radio wave

Description : Which of the following phenomena is possible is free space medium? A. Reflection of radio wave B. Diffraction of radio wave C. Refraction of radio wave D. Attenuation of radio wave

Last Answer : D. Attenuation of radio wave

When waves bend away from straight lines of travel, it is called _________. A. Refraction B. Reflection C. Rarefaction D. Diffraction

Description : When waves bend away from straight lines of travel, it is called _________. A. Refraction B. Reflection C. Rarefaction D. Diffraction

Last Answer : A. Refraction

ECE Board Exam March 1996 ___________ occurs when the microwave beam is at point of grazing over an obstacle. A. Diffraction B. Refraction C. Absorption D. Reflection

Description : ECE Board Exam March 1996 ___________ occurs when the microwave beam is at point of grazing over an obstacle. A. Diffraction B. Refraction C. Absorption D. Reflection

Last Answer : A. Diffraction

The reverberation time of a 184.2 cubic meters broadcast studio is 0.84 sec. Find the absorption effect of the materials used in metric sabines. A. 35.3 B. 10.96 C. 379.8 D. 109.6

Description : The reverberation time of a 184.2 cubic meters broadcast studio is 0.84 sec. Find the absorption effect of the materials used in metric sabines. A. 35.3 B. 10.96 C. 379.8 D. 109.6

Last Answer : A. 35.3

What is the optimum reverberation time at 500 Hz for a cinema? A. 0.8 – 1.2 sec. B. 0.9 – 1.3 sec. C. 0.6 – 0.8 sec. D. 0.45 – 0.55 sec.

Description : What is the optimum reverberation time at 500 Hz for a cinema? A. 0.8 – 1.2 sec. B. 0.9 – 1.3 sec. C. 0.6 – 0.8 sec. D. 0.45 – 0.55 sec.

Last Answer : A. 0.8 – 1.2 sec.

What is the optimum reverberation time at 500 to 1000 Hz of an auditorium? A. 0.9 to 1.1 s B. 1.4 to 1.6 s C. 1.5 to 1.6 s D. 1.6 to 1.8 s

Description : What is the optimum reverberation time at 500 to 1000 Hz of an auditorium? A. 0.9 to 1.1 s B. 1.4 to 1.6 s C. 1.5 to 1.6 s D. 1.6 to 1.8 s

Last Answer : D. 1.6 to 1.8 s

What is the effect in over modulated amplitude modulated radio broadcasting transmission? A. Interference to adjacent channel B. Higher fidelity C. Increase noise D. Higher audio signal

Description : What is the effect in over modulated amplitude modulated radio broadcasting transmission? A. Interference to adjacent channel B. Higher fidelity C. Increase noise D. Higher audio signal

Last Answer : A. Interference to adjacent channel

The local loop of the telephone system is understood to be A. a single piece of wire connecting the subscriber’s telephone set to another telephone set in an adjacent room B. a two-wire or four-wire communication circuit between the customer’s premise and central office C. a four-wire circuit connecting a facsimile machine to a computer D. a group of wires connecting a telephone set to a modem

Description : The local loop of the telephone system is understood to be A. a single piece of wire connecting the subscriber's telephone set to another telephone set in an adjacent room B. a two-wire or four- ... a facsimile machine to a computer D. a group of wires connecting a telephone set to a modem

Last Answer : B. a two-wire or four-wire communication circuit between the customer’s premise and central office

Which of these words best describes adjacent walls in a square room?

Description : Which of these words best describes adjacent walls in a square room?

Last Answer : A+

If you stand in a room, where two adjacent walls are covered with plane mirrors, the total number of your images formed will be (a) 2 (b) 3 (c) 4 (d) Infinite

Description : If you stand in a room, where two adjacent walls are covered with plane mirrors, the total number of your images formed will be (a) 2 (b) 3 (c) 4 (d) Infinite

Last Answer : Ans:(b)

The splitting of white light into its components is due to: (1) Reflection (2) Refraction (3) Transmission (4) Dispersion

Description : The splitting of white light into its components is due to: (1) Reflection (2) Refraction (3) Transmission (4) Dispersion

Last Answer : (4) Dispersion Explanation: Dispersion is used to separate a beam of white light into its constituent spectrum of colours. This phenomenon leads to rainbow.

The Brewster angle is the angle of a) Incidence b) Reflection c) Refraction d) Transmission

Description : The Brewster angle is the angle of a) Incidence b) Reflection c) Refraction d) Transmission

Last Answer : a) Incidence

When a CD (Compact Disc used in audio and Video system) is seen in sunlight, rainbow like colours are seen. This can be explained on the basis of phenomenon of 1) reflection and diffraction 2) reflection and transmission 3) diffraction and transmission 4) refraction, diffraction and transmission

Description : When a CD (Compact Disc used in audio and Video system) is seen in sunlight, rainbow like colours are seen. This can be explained on the basis of phenomenon of 1) reflection and diffraction 2) reflection and transmission 3) diffraction and transmission 4) refraction, diffraction and transmission

Last Answer : 4) refraction, diffraction and transmission

The splitting of white light into its components is due to: (1) reflection (2) refraction (3) transmission (4) dispersion

Description : The splitting of white light into its components is due to: (1) reflection (2) refraction (3) transmission (4) dispersion

Last Answer : dispersion

In a fiber-optic cable, the signal is propagatedalong theinner core by _______. A) reflection B) refraction C) modulation D) none of the above

Description : In a fiber-optic cable, the signal is propagatedalong theinner core by _______. A) reflection B) refraction C) modulation D) none of the above

Last Answer : reflection

When a beam of light travels through media of two different densities, if theangle of incidence isgreater than the critical angle, _______ occurs. A) reflection B) refraction C) incidence D) criticism

Description : When a beam of light travels through media of two different densities, if theangle of incidence isgreater than the critical angle, _______ occurs. A) reflection B) refraction C) incidence D) criticism

Last Answer : reflection

The white light after falling on prism gets split into seven colours due to _______ of light. a) reflection b)refraction c)dispersion d)bend

Description : The white light after falling on prism gets split into seven colours due to _______ of light. a) reflection b)refraction c)dispersion d)bend

Last Answer : c)dispersion

A man is sitting by the side of a large lake. He hears the utterances of bathers with their mouth close to water surface more clearly than if they were at same distance away on land. This effect is due to sound waves undergoing (a) Reflection (b) Refraction (c) Dispersion (d) Total internal reflection

Description : A man is sitting by the side of a large lake. He hears the utterances of bathers with their mouth close to water surface more clearly than if they were at same distance away on land. This ... due to sound waves undergoing (a) Reflection (b) Refraction (c) Dispersion (d) Total internal reflection

Last Answer : Ans:(c)

Which phenomenon is responsible for the echo of sound wave? (1) Reflection (2) Refraction (3) Interference (4) Polarization

Description : Which phenomenon is responsible for the echo of sound wave? (1) Reflection (2) Refraction (3) Interference (4) Polarization

Last Answer : (1) Reflection Explanation: Reflection of sound waves off of surfaces lead to one of two phenomena - an echo or a reverberation. The echo is produced due to hitting of the sound waves with the ... reflected sound wave reaches the ear more than 0.1 seconds after the original sound wave was heard.

When a vibrating tuning fork is placed on a table, a loud sound is heard. This is due to – (1) reflection (2) refraction (3) forced vibrations (4) damped vibrations

Description : When a vibrating tuning fork is placed on a table, a loud sound is heard. This is due to – (1) reflection (2) refraction (3) forced vibrations (4) damped vibrations

Last Answer : (3) forced vibrations Explanation: The tendency of one object to force another adjoining or interconnected object into vibrational motion is referred to as a forced vibration. In the case of the ... forced into vibration. This causes an increase in the amplitude and thus loudness of the sound.

Echo is a ------ of sound? A. Reflection (Answer) B. Refraction C. Interference D. None

Description : Echo is a ------ of sound? A. Reflection (Answer) B. Refraction C. Interference D. None

Last Answer : A. Reflection (Answer)

Which phenomenon is responsible for the echo of sound wave? (1) Reflection (2) Refraction (3) Interference (4) Polarisation

Description : Which phenomenon is responsible for the echo of sound wave? (1) Reflection (2) Refraction (3) Interference (4) Polarisation

Last Answer : Reflection

When a vibrating tuning fork is placed on a table, a loud sound is heard. This is due to : (1) reflection (2) refraction (3) forced vibrations (4) damped vibrations

Description : When a vibrating tuning fork is placed on a table, a loud sound is heard. This is due to : (1) reflection (2) refraction (3) forced vibrations (4) damped vibrations

Last Answer : forced vibrations

White ceilings when painting a room

Description : I want to paint the rooms in color and leave the white ceilings. How big to leave the white edges under the ceiling?

Last Answer : We still have white under the ceiling 17 cm and it looks great. I recommend

The sound which continues even after its source is cut off, is called (A) Reverberation (B) Echo (C) Intensity of sound (D) Interferenc

Description : The sound which continues even after its source is cut off, is called (A) Reverberation (B) Echo (C) Intensity of sound (D) Interferenc

Last Answer : Answer: Option A

What did the veteran regiments flanking the new troops that were running away begin to do Red badge of courage?

Description : What did the veteran regiments flanking the new troops that were running away begin to do Red badge of courage?

Last Answer : Need answer

Man-made noise is usually from _______. A. transmission over power lines and by ground wave B. sky-wave C. space-wave D. troposphere

Description : Man-made noise is usually from _______. A. transmission over power lines and by ground wave B. sky-wave C. space-wave D. troposphere

Last Answer : A. transmission over power lines and by ground wave

In data communication the transmission of binary signals will require _______. A. Same bandwidth as analog B. More bandwidth than analog C. Less bandwidth than analog D. Bigger cable diameter

Description : In data communication the transmission of binary signals will require _______. A. Same bandwidth as analog B. More bandwidth than analog C. Less bandwidth than analog D. Bigger cable diameter

Last Answer : B. More bandwidth than analog

Space diversity transmission means transmitting and receiving on _______. A. Two or more antennas operating on two different frequencies B. Two or more identical frequencies C. Two or more antennas operating on the same frequency D. Two or more different frequency

Description : Space diversity transmission means transmitting and receiving on _______. A. Two or more antennas operating on two different frequencies B. Two or more identical frequencies C. Two or more antennas operating on the same frequency D. Two or more different frequency

Last Answer : C. Two or more antennas operating on the same frequency

Coherent light of a single frequency passes through a double slit with a separation d, to produce a pattern on a screen as distance D from the slits. What would cause the separation between adjacent minima on the screen to increase? A. A. increase the index of refraction of the medium in which the setup is immersed B. increase the separation d between the slits C. increase the distance D. increase the frequency of the incident light

Description : Coherent light of a single frequency passes through a double slit with a separation d, to produce a pattern on a screen as distance D from the slits. What would cause the separation between adjacent ... d between the slits C. increase the distance D. increase the frequency of the incident light

Last Answer : B. increase the separation d between the slits

What type of angle do construction workers use when building to make sure that the walls and floors of a building are perpendicular?

Description : What type of angle do construction workers use when building to make sure that the walls and floors of a building are perpendicular?

Last Answer : They use a right angle!

Pick up the correct statement in case of water supply. (A) Pipes laid in trenches and pipes fixed to walls are measured separately (B) Cutting through walls and floors are included with the item (C) Pipes are classified according to their sizes and quality (D) All the above

Description : Pick up the correct statement in case of water supply. (A) Pipes laid in trenches and pipes fixed to walls are measured separately (B) Cutting through walls and floors are included with the item (C) Pipes are classified according to their sizes and quality (D) All the above

Last Answer : (D) All the above

What is the amount of sound reduction provided by a barrier – wall, floor, or ceiling called? A. Sound Attenuation B. Transmission loss C. Sound absorption D. Barrier loss

Description : What is the amount of sound reduction provided by a barrier – wall, floor, or ceiling called? A. Sound Attenuation B. Transmission loss C. Sound absorption D. Barrier loss

Last Answer : B. Transmission loss

A third symbol radio emission which represent telephone transmission including sound broadcasting. A. W B. F C. C D. E

Description : A third symbol radio emission which represent telephone transmission including sound broadcasting. A. W B. F C. C D. E

Last Answer : D. E

____________ is the average rate of transmission of sound energy in a given direction through a cross sectional area of 1 sq.m. at right angle to the direction. A. Sound pressure B. Sound intensity C. Pressure variation D. Loudness

Description : ____________ is the average rate of transmission of sound energy in a given direction through a cross sectional area of 1 sq.m. at right angle to the direction. A. Sound pressure B. Sound intensity C. Pressure variation D. Loudness

Last Answer : B. Sound intensity

What circuit is responsible in activating and deactivating adjacent antenna elements in a mobile satellite array? A. Radial divider B. Divider/combiner C. Radial combiner D. Radial multiplexer

Description : What circuit is responsible in activating and deactivating adjacent antenna elements in a mobile satellite array? A. Radial divider B. Divider/combiner C. Radial combiner D. Radial multiplexer

Last Answer : A. Radial divider

What mathematical plane figure is ideal in cellular system design and engineering it graphically and functionally depicts overlapping radio coverage between and among adjacent cell base stations? A. Hexagon B. Octagon C. Pentagon D. Nonagon

Description : What mathematical plane figure is ideal in cellular system design and engineering it graphically and functionally depicts overlapping radio coverage between and among adjacent cell base stations? A. Hexagon B. Octagon C. Pentagon D. Nonagon

Last Answer : A. Hexagon

What is the typical center frequency spacing between adjacent channels (transponders) in satellites? A. 36 MHz B. 40 MHz C. 500 MHz D. 4 MHz

Description : What is the typical center frequency spacing between adjacent channels (transponders) in satellites? A. 36 MHz B. 40 MHz C. 500 MHz D. 4 MHz

Last Answer : B. 40 MHz

What is a frequency discriminator? A. A circuit for filtering two closely adjacent signals B. A circuit for detecting FM signals C. An FM generator D. An automatic bandswitching circuit.

Description : What is a frequency discriminator? A. A circuit for filtering two closely adjacent signals B. A circuit for detecting FM signals C. An FM generator D. An automatic bandswitching circuit.

Last Answer : B. A circuit for detecting FM signals