What is the optimum reverberation time at 500 to 1000 Hz of an auditorium? A. 0.9 to 1.1 s B. 1.4 to 1.6 s C. 1.5 to 1.6 s D. 1.6 to 1.8 s

What is the optimum reverberation time at 500 to 1000 Hz of an auditorium?
A. 0.9 to 1.1 s
B. 1.4 to 1.6 s
C. 1.5 to 1.6 s
D. 1.6 to 1.8 s
by

1 Answer

Answer :

D. 1.6 to 1.8 s
by

Related questions

What is the optimum reverberation time at 500 Hz for a cinema? A. 0.8 – 1.2 sec. B. 0.9 – 1.3 sec. C. 0.6 – 0.8 sec. D. 0.45 – 0.55 sec.

Description : What is the optimum reverberation time at 500 Hz for a cinema? A. 0.8 – 1.2 sec. B. 0.9 – 1.3 sec. C. 0.6 – 0.8 sec. D. 0.45 – 0.55 sec.

Last Answer : A. 0.8 – 1.2 sec.

Calculate the reverberation time of a living room 8 ft high, 13 ft wide and 20 ft long. The total absorption of the building structure inside the room is 180.7 sabines with four persons present in the room. A. 0.5 ms B. 0.05 s C. 0.5 s D. 5 ms

Description : Calculate the reverberation time of a living room 8 ft high, 13 ft wide and 20 ft long. The total absorption of the building structure inside the room is 180.7 sabines with four persons present in the room. A. 0.5 ms B. 0.05 s C. 0.5 s D. 5 ms

Last Answer : C. 0.5 s

The reverberation time of a 184.2 cubic meters broadcast studio is 0.84 sec. Find the absorption effect of the materials used in metric sabines. A. 35.3 B. 10.96 C. 379.8 D. 109.6

Description : The reverberation time of a 184.2 cubic meters broadcast studio is 0.84 sec. Find the absorption effect of the materials used in metric sabines. A. 35.3 B. 10.96 C. 379.8 D. 109.6

Last Answer : A. 35.3

What is the standard test tone used for audio measurements? A. 100 Hz B. 500 Hz C. 1000 Hz D. 2000 Hz

Description : What is the standard test tone used for audio measurements? A. 100 Hz B. 500 Hz C. 1000 Hz D. 2000 Hz

Last Answer : C. 1000 Hz

What is the channel spacing for MF-HF voice frequencies? A. 2.8 kHz B. 500 Hz C. 3.5 kHz D. 3 kHz

Description : What is the channel spacing for MF-HF voice frequencies? A. 2.8 kHz B. 500 Hz C. 3.5 kHz D. 3 kHz

Last Answer : D. 3 kHz

A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz

Description : A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz

Last Answer : C. 999.8 kHz, 1000 kHz, and 1000.2 kHz

A frequency of 3000 Hz has how many octaves above 1000 Hz? A. 1.6 octaves B. 2.1 octaves C. 1 octave D. 3 octaves

Description : A frequency of 3000 Hz has how many octaves above 1000 Hz? A. 1.6 octaves B. 2.1 octaves C. 1 octave D. 3 octaves

Last Answer : A. 1.6 octaves

In acoustics, _____ is the apparent change in frequency or pitch when a sound source moves either toward or away from a listener. A. flanking B. reverberation C. Doppler effect D. echo

Description : In acoustics, _____ is the apparent change in frequency or pitch when a sound source moves either toward or away from a listener. A. flanking B. reverberation C. Doppler effect D. echo

Last Answer : C. Doppler effect

Which of the following is NOT an acoustical defect to be avoided in acoustical designs? A. Reverberation B. Flutter echo C. Distortion D. Sound concentration

Description : Which of the following is NOT an acoustical defect to be avoided in acoustical designs? A. Reverberation B. Flutter echo C. Distortion D. Sound concentration

Last Answer : A. Reverberation

What do you call the perceptible sound repetition? A. Reverberation B. Echo C. Reflection D. Masking

Description : What do you call the perceptible sound repetition? A. Reverberation B. Echo C. Reflection D. Masking

Last Answer : B. Echo

_______ is the transmission of sound from one room to an adjacent room thru common walls, floors or ceilings. A. Reverberation B. Refraction C. Flanking transmission D. Reflection

Description : _______ is the transmission of sound from one room to an adjacent room thru common walls, floors or ceilings. A. Reverberation B. Refraction C. Flanking transmission D. Reflection

Last Answer : C. Flanking transmission

Reference noise is ___________. A. a 1000 Hz, -90 dBm tone B. a noise that creates the same interfering effect as a 1000Hz, -90dBm tone C. a noise that creates zero dBrn in a voice channel D. B and C above

Description : Reference noise is ___________. A. a 1000 Hz, -90 dBm tone B. a noise that creates the same interfering effect as a 1000Hz, -90dBm tone C. a noise that creates zero dBrn in a voice channel D. B and C above

Last Answer : D. B and C above

What is the reference frequency of CCIT phosphomeric noise measurement? A. 800 HzB. 1000 Hz C. 1500 Hz D. 3400 Hz

Description : What is the reference frequency of CCIT phosphomeric noise measurement? A. 800 Hz B. 1000 Hz C. 1500 Hz D. 3400 Hz

Last Answer : A. 800 Hz

The agreed standard for measuring loudness is the loudness sensation produced by a 1000 Hz sine wave _____ dB above the listener’s threshold of hearing. A. 80 B. 50 C. 30 D. 40

Description : The agreed standard for measuring loudness is the loudness sensation produced by a 1000 Hz sine wave _____ dB above the listener’s threshold of hearing. A. 80 B. 50 C. 30 D. 40

Last Answer : D. 40

What is the reference frequency of CCITT psophometric noise measurement? A. 800 Hz B. 1500 Hz C. 3400 Hz D. 1000 Hz

Description : What is the reference frequency of CCITT psophometric noise measurement? A. 800 Hz B. 1500 Hz C. 3400 Hz D. 1000 Hz

Last Answer : A. 800 Hz

What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Description : What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Last Answer : C. 125,000

What is the channel spacing for SITOR frequencies? A. 500 Hz B. 170 Hz C. 300 Hz D. 3 kHz

Description : What is the channel spacing for SITOR frequencies? A. 500 Hz B. 170 Hz C. 300 Hz D. 3 kHz

Last Answer : A. 500 Hz

Flicker noise is a poorly understood form of noise which may be completely ignored about above ____. A.100 Hz B. 200 Hz C. 400 Hz D. 500 Hz

Description : Flicker noise is a poorly understood form of noise which may be completely ignored about above ____. A.100 Hz B. 200 Hz C. 400 Hz D. 500 Hz

Last Answer : D. 500 Hz

What is the typical frequency used for communicating to submerged submarines? A. 100 Hz B. 500 Hz C. 4 kHz D. 200 Hz

Description : What is the typical frequency used for communicating to submerged submarines? A. 100 Hz B. 500 Hz C. 4 kHz D. 200 Hz

Last Answer : A. 100 Hz

What is the channel bandwidth of a standard analogue telephone system? A. 300-500 Hz B. 1200 kHz C. 100-300 Hz D. 300-3400 Hz

Description : What is the channel bandwidth of a standard analogue telephone system? A. 300-500 Hz B. 1200 kHz C. 100-300 Hz D. 300-3400 Hz

Last Answer : D. 300-3400 Hz

If the frequency spectrum of a signal has a bandwidth of500 Hz with thehighest frequency at 600 Hz, what shouldbe the samplingrate, according to the Nyquist theorem? A) 200 samples/s B) 500 samples/s C) 1000 samples/s D) 1200 samples/s

Description : If the frequency spectrum of a signal has a bandwidth of500 Hz with thehighest frequency at 600 Hz, what shouldbe the samplingrate, according to the Nyquist theorem? A) 200 samples/s B) 500 samples/s C) 1000 samples/s D) 1200 samples/s

Last Answer : 1200 samples/s

The bandwidth of C-band satellite frequency band in U.S. A. 500 GHz B. 1000 GHz C. 1000 MHz D. 500 MHz

Description : The bandwidth of C-band satellite frequency band in U.S. A. 500 GHz B. 1000 GHz C. 1000 MHz D. 500 MHz

Last Answer : D. 500 MHz

A radio communications link is to be established via the ionosphere. The maximum virtual height of the layer is 100 km at the midpoint of the path and the critical frequency is 2 MHz. The distance between stations is 600 km. determine the optimum working frequency? A. 6.32 MHz B. 2.1 MHz C. 5.4 MHz D. 1.8 MHz

Description : A radio communications link is to be established via the ionosphere. The maximum virtual height of the layer is 100 km at the midpoint of the path and the critical frequency is 2 MHz. The distance between stations is 600 ... optimum working frequency? A. 6.32 MHz B. 2.1 MHz C. 5.4 MHz D. 1.8 MHz

Last Answer : C. 5.4 MHz

If the input to T-flipflop is 100 Hz signal, the final output of the three T-flipflops in cascade is (A) 1000 Hz (B) 500 Hz (C) 333 Hz (D) 12.5 Hz.

Description : If the input to T-flipflop is 100 Hz signal, the final output of the three T-flipflops in cascade is (A) 1000 Hz (B) 500 Hz (C) 333 Hz (D) 12.5 Hz.

Last Answer : (D) 12.5 Hz.

How many voice signals (4 kHz max.) would fit into a 5 MHz spectrum? A. 1250 B. 500 C. 1000 D. 1500

Description : How many voice signals (4 kHz max.) would fit into a 5 MHz spectrum? A. 1250 B. 500 C. 1000 D. 1500

Last Answer : A. 1250

What is the bandwidth available in the commercial C-band? A. 1000 MHz B. 36 MHz C. 250 MHz D. 500 MHz

Description : What is the bandwidth available in the commercial C-band? A. 1000 MHz B. 36 MHz C. 250 MHz D. 500 MHz

Last Answer : D. 500 MHz

At what distance is VHF propagation normally limited? A. Around 500 miles B. Around 1500 miles C. Around 2000 miles D. Around 1000 miles

Description : At what distance is VHF propagation normally limited? A. Around 500 miles B. Around 1500 miles C. Around 2000 miles D. Around 1000 miles

Last Answer : A. Around 500 miles

At what distance is VHF propagation normally limited? A. Around 500 miles B. Around 1500 miles C. Around 2000 miles D. Around 1000 miles

Description : At what distance is VHF propagation normally limited? A. Around 500 miles B. Around 1500 miles C. Around 2000 miles D. Around 1000 miles

Last Answer : A. Around 500 miles

A car having a mass of 1000 kg deflects its springs 4 cm under its load. Determine the natural frequency of the car in vertical direction. A 5 Hz B 4.67 Hz C 9.8 Hz D 2.49 Hz

Description : A car having a mass of 1000 kg deflects its springs 4 cm under its load. Determine the natural frequency of the car in vertical direction. A 5 Hz B 4.67 Hz C 9.8 Hz D 2.49 Hz

Last Answer : D 2.49 Hz

A car having a mass of 1000 kg deflects its springs 4 cm under its load. Determine the natural frequency of the car in vertical direction. A 5 HzB 4.67 Hz C 9.8 Hz D 2.49 Hz

Description : A car having a mass of 1000 kg deflects its springs 4 cm under its load. Determine the natural frequency of the car in vertical direction. A 5 HzB 4.67 Hz C 9.8 Hz D 2.49 Hz

Last Answer : D 2.49 Hz

A car having a mass of 1000 kg deflects its springs 4 cm under its load. D Determine the natural frequency of the car in vertical direction. (A)5 Hz (B) 4.67 Hz (C) 9.8 Hz (D) 2.49 Hz

Description : A car having a mass of 1000 kg deflects its springs 4 cm under its load. D Determine the natural frequency of the car in vertical direction. (A)5 Hz (B) 4.67 Hz (C) 9.8 Hz (D) 2.49 Hz

Last Answer : (D) 2.49 Hz

What is the optimum volume per person of rooms for speech? A. 2.8 B. 3.1 C. 4.2 D. 5.1

Description : What is the optimum volume per person of rooms for speech? A. 2.8 B. 3.1 C. 4.2 D. 5.1

Last Answer : A. 2.8

The laser frequency when the light has the wavelength 800 nm is a. 375 x 10^12 Hz b. 475 x 10^15 Hz c. 375 x 10^9 Hz d. 375 x 10^18 Hz

Description : The laser frequency when the light has the wavelength 800 nm is a. 375 x 10^12 Hz b. 475 x 10^15 Hz c. 375 x 10^9 Hz d. 375 x 10^18 Hz

Last Answer : a. 375 x 10^12 Hz

For a cinema, the optimum volume per person required is A. 3.1 B. 2.8 C. 7.1 D. 4.2

Description : For a cinema, the optimum volume per person required is A. 3.1 B. 2.8 C. 7.1 D. 4.2

Last Answer : A. 3.1

A 10 Kg mass suspended by spring of stiffness 1000 N/m. the natural frequency of the system after giving excitation will be A. 0 Hz B. 1.59 Hz C. 2 Hz D. 15.9 Hz

Description : A 10 Kg mass suspended by spring of stiffness 1000 N/m. the natural frequency of the system after giving excitation will be A. 0 Hz B. 1.59 Hz C. 2 Hz D. 15.9 Hz

Last Answer : B. 1.59 Hz

A loudspeaker cabinet has an internal volume of 5,184 in3 (84,950 cm3 ). It has a port area on the baffle of 50 in2 (322.58cm2 ) and a thickness of 0.70 in (18 mm). What is the Helmholtz resonance, in hertz, of this loudspeaker enclosure? A. 250 Hz B. 245 Hz C. 240 Hz D. 255 Hz

Description : A loudspeaker cabinet has an internal volume of 5,184 in3 (84,950 cm3 ). It has a port area on the baffle of 50 in2 (322.58cm2 ) and a thickness of 0.70 in (18 mm). What is the Helmholtz resonance, in hertz, of this loudspeaker enclosure? A. 250 Hz B. 245 Hz C. 240 Hz D. 255 Hz

Last Answer : C. 240 Hz

What is the optimum pH range for the cultivation of onion? a. 3.2-4.0 b. 5.8-6.5 c. 4.2-5.0 d. 8.9-10.6

Description : What is the optimum pH range for the cultivation of onion? a. 3.2-4.0 b. 5.8-6.5 c. 4.2-5.0 d. 8.9-10.6

Last Answer : b. 5.8-6.5

What is the optimum pH range for the cultivation of onion? a. 3.2-4.0 b. 5.8-6.5 c. 4.2-5.0 d. 8.9-10.6

Description : What is the optimum pH range for the cultivation of onion? a. 3.2-4.0 b. 5.8-6.5 c. 4.2-5.0 d. 8.9-10.6

Last Answer : b. 5.8-6.5

What is the photon energy for an infrared wave with frequency of 1012 Hz? a. 10.6 x 1034 joules b. 6.63 x 10-34 joules c. 6.63 x 10-22 joules d. 10.6 x 1022 joules

Description : What is the photon energy for an infrared wave with frequency of 1012 Hz? a. 10.6 x 1034 joules b. 6.63 x 10-34 joules c. 6.63 x 10-22 joules d. 10.6 x 1022 joules

Last Answer : c. 6.63 x 10-22 joules

The frequency of a wave travelling at a speed of 500 ms-1 is 25 Hz. Its time period will be ______. (i) 20 s (ii) 0.05 s (iii) 25 s (iv) 0.04 s

Description : The frequency of a wave travelling at a speed of 500 ms-1 is 25 Hz. Its time period will be ______. (i) 20 s (ii) 0.05 s (iii) 25 s (iv) 0.04 s

Last Answer : (iv) 0.04 s

At what loudness level do pitch (in mels) and frequency (in Hz) are numerically equal? A. 0 dB B. 20 dB C. 60 dB D. 40 dB

Description : At what loudness level do pitch (in mels) and frequency (in Hz) are numerically equal? A. 0 dB B. 20 dB C. 60 dB D. 40 dB

Last Answer : D. 40 dB

The lowest frequency produced by an instrument. A. Harmonic B. Fundamental C. Midrange D. 0 Hz

Description : The lowest frequency produced by an instrument. A. Harmonic B. Fundamental C. Midrange D. 0 Hz

Last Answer : B. Fundamental

A voice-grade circuit using the PTN has an ideal passband of A. 0 to 4 Hz B. 0 to 4 kHz C. 0 to 4 GHz D. 0 to 4 MHz

Description : A voice-grade circuit using the PTN has an ideal passband of A. 0 to 4 Hz B. 0 to 4 kHz C. 0 to 4 GHz D. 0 to 4 MHz

Last Answer : B. 0 to 4 kHz

A 50 Hz, 4-pole, 500 MVA, 22 kV turbo-generator is delivering rated megavolt amperes at 0.8 power factor.

Description : A 50 Hz, 4-pole, 500 MVA, 22 kV turbo-generator is delivering rated megavolt amperes at 0.8 power factor. Suddenly a fault occurs reducing in electric power output by 40%. Neglect losses and assume constant power input to the ... the time of fault will be  (A) 1.528 (B) 1.018 (C) 0.848 (D) 0.509

Last Answer : A 50 Hz, 4-pole, 500 MVA, 22 kV turbo-generator is delivering rated megavolt amperes at 0.8 power factor. Suddenly a fault occurs reducing in electric power output by 40%. Neglect losses and assume ... the shaft. The accelerating torque in the generator in MNm at the time of fault will be 1.018 

What does OMB stand for? A. Optical media board B. Organization of medical biologist C. Optical medium board D. Optimum main board

Description : What does OMB stand for? A. Optical media board B. Organization of medical biologist C. Optical medium board D. Optimum main board

Last Answer : A. Optical media board

To obtain the most reliable sky wave propagation the ____ should be used. A. Lowest useable frequency (LUF). B. Maximum useable frequency (MUF). C. Optimum useable frequency (OUF). D. Critical frequency

Description : To obtain the most reliable sky wave propagation the ____ should be used. A. Lowest useable frequency (LUF). B. Maximum useable frequency (MUF). C. Optimum useable frequency (OUF). D. Critical frequency

Last Answer : C. Optimum useable frequency (OUF).

What is the electrical wavelength of a 500 MHz signal? A. 60 centimeters B. 6 meters C. 0.06 meter D. 60 meters

Description : What is the electrical wavelength of a 500 MHz signal? A. 60 centimeters B. 6 meters C. 0.06 meter D. 60 meters

Last Answer : A. 60 centimeters

What is the wavelength of a signal at 500 MHz? A. 0.062 cm B. 6 meters C. 60 cm D. 60 meters

Description : What is the wavelength of a signal at 500 MHz? A. 0.062 cm B. 6 meters C. 60 cm D. 60 meters

Last Answer : C. 60 cm

What is the typical velocity factor of coaxial cables? A. 0.6 to 0.8 B. 0.3 to 0.5 C. 0.5 to 0.9 D. 0.4 to 0.6

Description : What is the typical velocity factor of coaxial cables? A. 0.6 to 0.8 B. 0.3 to 0.5 C. 0.5 to 0.9 D. 0.4 to 0.6

Last Answer : A. 0.6 to 0.8

The velocity factor in transmission lines vary from ___ to ___. A. 0.6 to 0.8 B. 0.3 to 0.5 C.0.5 to 0.9 D. 0.8 to 0.9

Description : The velocity factor in transmission lines vary from ___ to ___. A. 0.6 to 0.8 B. 0.3 to 0.5 C.0.5 to 0.9 D. 0.8 to 0.9

Last Answer : C.0.5 to 0.9