What is the optimum reverberation time at 500 Hz for a cinema? A. 0.8 – 1.2 sec. B. 0.9 – 1.3 sec. C. 0.6 – 0.8 sec. D. 0.45 – 0.55 sec.

What is the optimum reverberation time at 500 Hz for a cinema?
A. 0.8 – 1.2 sec.
B. 0.9 – 1.3 sec.
C. 0.6 – 0.8 sec.
D. 0.45 – 0.55 sec.
by

1 Answer

Answer :

A. 0.8 – 1.2 sec.
by

Related questions

What is the optimum reverberation time at 500 to 1000 Hz of an auditorium? A. 0.9 to 1.1 s B. 1.4 to 1.6 s C. 1.5 to 1.6 s D. 1.6 to 1.8 s

Description : What is the optimum reverberation time at 500 to 1000 Hz of an auditorium? A. 0.9 to 1.1 s B. 1.4 to 1.6 s C. 1.5 to 1.6 s D. 1.6 to 1.8 s

Last Answer : D. 1.6 to 1.8 s

The reverberation time of a 184.2 cubic meters broadcast studio is 0.84 sec. Find the absorption effect of the materials used in metric sabines. A. 35.3 B. 10.96 C. 379.8 D. 109.6

Description : The reverberation time of a 184.2 cubic meters broadcast studio is 0.84 sec. Find the absorption effect of the materials used in metric sabines. A. 35.3 B. 10.96 C. 379.8 D. 109.6

Last Answer : A. 35.3

For a cinema, the optimum volume per person required is A. 3.1 B. 2.8 C. 7.1 D. 4.2

Description : For a cinema, the optimum volume per person required is A. 3.1 B. 2.8 C. 7.1 D. 4.2

Last Answer : A. 3.1

Calculate the reverberation time of a living room 8 ft high, 13 ft wide and 20 ft long. The total absorption of the building structure inside the room is 180.7 sabines with four persons present in the room. A. 0.5 ms B. 0.05 s C. 0.5 s D. 5 ms

Description : Calculate the reverberation time of a living room 8 ft high, 13 ft wide and 20 ft long. The total absorption of the building structure inside the room is 180.7 sabines with four persons present in the room. A. 0.5 ms B. 0.05 s C. 0.5 s D. 5 ms

Last Answer : C. 0.5 s

What is the channel spacing for MF-HF voice frequencies? A. 2.8 kHz B. 500 Hz C. 3.5 kHz D. 3 kHz

Description : What is the channel spacing for MF-HF voice frequencies? A. 2.8 kHz B. 500 Hz C. 3.5 kHz D. 3 kHz

Last Answer : D. 3 kHz

In acoustics, _____ is the apparent change in frequency or pitch when a sound source moves either toward or away from a listener. A. flanking B. reverberation C. Doppler effect D. echo

Description : In acoustics, _____ is the apparent change in frequency or pitch when a sound source moves either toward or away from a listener. A. flanking B. reverberation C. Doppler effect D. echo

Last Answer : C. Doppler effect

Which of the following is NOT an acoustical defect to be avoided in acoustical designs? A. Reverberation B. Flutter echo C. Distortion D. Sound concentration

Description : Which of the following is NOT an acoustical defect to be avoided in acoustical designs? A. Reverberation B. Flutter echo C. Distortion D. Sound concentration

Last Answer : A. Reverberation

What do you call the perceptible sound repetition? A. Reverberation B. Echo C. Reflection D. Masking

Description : What do you call the perceptible sound repetition? A. Reverberation B. Echo C. Reflection D. Masking

Last Answer : B. Echo

_______ is the transmission of sound from one room to an adjacent room thru common walls, floors or ceilings. A. Reverberation B. Refraction C. Flanking transmission D. Reflection

Description : _______ is the transmission of sound from one room to an adjacent room thru common walls, floors or ceilings. A. Reverberation B. Refraction C. Flanking transmission D. Reflection

Last Answer : C. Flanking transmission

What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Description : What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Last Answer : C. 125,000

What is the channel spacing for SITOR frequencies? A. 500 Hz B. 170 Hz C. 300 Hz D. 3 kHz

Description : What is the channel spacing for SITOR frequencies? A. 500 Hz B. 170 Hz C. 300 Hz D. 3 kHz

Last Answer : A. 500 Hz

What is the standard test tone used for audio measurements? A. 100 Hz B. 500 Hz C. 1000 Hz D. 2000 Hz

Description : What is the standard test tone used for audio measurements? A. 100 Hz B. 500 Hz C. 1000 Hz D. 2000 Hz

Last Answer : C. 1000 Hz

Flicker noise is a poorly understood form of noise which may be completely ignored about above ____. A.100 Hz B. 200 Hz C. 400 Hz D. 500 Hz

Description : Flicker noise is a poorly understood form of noise which may be completely ignored about above ____. A.100 Hz B. 200 Hz C. 400 Hz D. 500 Hz

Last Answer : D. 500 Hz

What is the typical frequency used for communicating to submerged submarines? A. 100 Hz B. 500 Hz C. 4 kHz D. 200 Hz

Description : What is the typical frequency used for communicating to submerged submarines? A. 100 Hz B. 500 Hz C. 4 kHz D. 200 Hz

Last Answer : A. 100 Hz

What is the channel bandwidth of a standard analogue telephone system? A. 300-500 Hz B. 1200 kHz C. 100-300 Hz D. 300-3400 Hz

Description : What is the channel bandwidth of a standard analogue telephone system? A. 300-500 Hz B. 1200 kHz C. 100-300 Hz D. 300-3400 Hz

Last Answer : D. 300-3400 Hz

A radio communications link is to be established via the ionosphere. The maximum virtual height of the layer is 100 km at the midpoint of the path and the critical frequency is 2 MHz. The distance between stations is 600 km. determine the optimum working frequency? A. 6.32 MHz B. 2.1 MHz C. 5.4 MHz D. 1.8 MHz

Description : A radio communications link is to be established via the ionosphere. The maximum virtual height of the layer is 100 km at the midpoint of the path and the critical frequency is 2 MHz. The distance between stations is 600 ... optimum working frequency? A. 6.32 MHz B. 2.1 MHz C. 5.4 MHz D. 1.8 MHz

Last Answer : C. 5.4 MHz

In India, which one of the following should be considered the right combination of the age in days and live body weight in kg for a lamb for its weaning ? (A) 20 days to 30 days and 6 kg to 7 kg (B) 45 days to 60 days and 8 kg to 10 kg (C) 105 days to 120 days and 18 kg to 21 kg (D) 75 days to 90 days and 12 kg to 15 kg (E) 55 days to 70 days and 9 kg to 11 kg

Description : In India, which one of the following should be considered the right combination of the age in days and live body weight in kg for a lamb for its weaning ? (A) 20 days to 30 days and 6 kg to 7 kg (B) 45 days to 60 ... (D) 75 days to 90 days and 12 kg to 15 kg (E) 55 days to 70 days and 9 kg to 11 kg

Last Answer : (C) 105 days to 120 days and 18 kg to 21 kg

The laser frequency when the light has the wavelength 800 nm is a. 375 x 10^12 Hz b. 475 x 10^15 Hz c. 375 x 10^9 Hz d. 375 x 10^18 Hz

Description : The laser frequency when the light has the wavelength 800 nm is a. 375 x 10^12 Hz b. 475 x 10^15 Hz c. 375 x 10^9 Hz d. 375 x 10^18 Hz

Last Answer : a. 375 x 10^12 Hz

What is the optimum volume per person of rooms for speech? A. 2.8 B. 3.1 C. 4.2 D. 5.1

Description : What is the optimum volume per person of rooms for speech? A. 2.8 B. 3.1 C. 4.2 D. 5.1

Last Answer : A. 2.8

A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz

Description : A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz

Last Answer : C. 999.8 kHz, 1000 kHz, and 1000.2 kHz

What is the photon energy for an infrared wave with frequency of 1012 Hz? a. 10.6 x 1034 joules b. 6.63 x 10-34 joules c. 6.63 x 10-22 joules d. 10.6 x 1022 joules

Description : What is the photon energy for an infrared wave with frequency of 1012 Hz? a. 10.6 x 1034 joules b. 6.63 x 10-34 joules c. 6.63 x 10-22 joules d. 10.6 x 1022 joules

Last Answer : c. 6.63 x 10-22 joules

A frequency of 3000 Hz has how many octaves above 1000 Hz? A. 1.6 octaves B. 2.1 octaves C. 1 octave D. 3 octaves

Description : A frequency of 3000 Hz has how many octaves above 1000 Hz? A. 1.6 octaves B. 2.1 octaves C. 1 octave D. 3 octaves

Last Answer : A. 1.6 octaves

Assume postal rates for 'light letters' are: $0.25 up to 10 grams; $0.35 up to 50 grams; $0.45 up to 75 grams; $0.55 up to 100 grams. Which test inputs (in grams) would be selected using boundary value analysis? A. 0, 9,19, 49, 50, 74, 75, 99,100 B. 10, 50, 75,100, 250, 1000 C. 0, 1,10,11, 50, 51, 75, 76,100,101 D. 25, 26, 35, 36, 45, 46, 55, 56

Description : Assume postal rates for 'light letters' are: $0.25 up to 10 grams; $0.35 up to 50 grams; $0.45 up to 75 grams; $0.55 up to 100 grams. Which test inputs (in grams) would be selected using boundary value analysis? A. 0, 9,19, ... C. 0, 1,10,11, 50, 51, 75, 76,100,101 D. 25, 26, 35, 36, 45, 46, 55, 56

Last Answer : C. 0, 1,10,11, 50, 51, 75, 76,100,101

At what loudness level do pitch (in mels) and frequency (in Hz) are numerically equal? A. 0 dB B. 20 dB C. 60 dB D. 40 dB

Description : At what loudness level do pitch (in mels) and frequency (in Hz) are numerically equal? A. 0 dB B. 20 dB C. 60 dB D. 40 dB

Last Answer : D. 40 dB

The lowest frequency produced by an instrument. A. Harmonic B. Fundamental C. Midrange D. 0 Hz

Description : The lowest frequency produced by an instrument. A. Harmonic B. Fundamental C. Midrange D. 0 Hz

Last Answer : B. Fundamental

A voice-grade circuit using the PTN has an ideal passband of A. 0 to 4 Hz B. 0 to 4 kHz C. 0 to 4 GHz D. 0 to 4 MHz

Description : A voice-grade circuit using the PTN has an ideal passband of A. 0 to 4 Hz B. 0 to 4 kHz C. 0 to 4 GHz D. 0 to 4 MHz

Last Answer : B. 0 to 4 kHz

A loudspeaker cabinet has an internal volume of 5,184 in3 (84,950 cm3 ). It has a port area on the baffle of 50 in2 (322.58cm2 ) and a thickness of 0.70 in (18 mm). What is the Helmholtz resonance, in hertz, of this loudspeaker enclosure? A. 250 Hz B. 245 Hz C. 240 Hz D. 255 Hz

Description : A loudspeaker cabinet has an internal volume of 5,184 in3 (84,950 cm3 ). It has a port area on the baffle of 50 in2 (322.58cm2 ) and a thickness of 0.70 in (18 mm). What is the Helmholtz resonance, in hertz, of this loudspeaker enclosure? A. 250 Hz B. 245 Hz C. 240 Hz D. 255 Hz

Last Answer : C. 240 Hz

What is the optimum pH range for the cultivation of onion? a. 3.2-4.0 b. 5.8-6.5 c. 4.2-5.0 d. 8.9-10.6

Description : What is the optimum pH range for the cultivation of onion? a. 3.2-4.0 b. 5.8-6.5 c. 4.2-5.0 d. 8.9-10.6

Last Answer : b. 5.8-6.5

What is the optimum pH range for the cultivation of onion? a. 3.2-4.0 b. 5.8-6.5 c. 4.2-5.0 d. 8.9-10.6

Description : What is the optimum pH range for the cultivation of onion? a. 3.2-4.0 b. 5.8-6.5 c. 4.2-5.0 d. 8.9-10.6

Last Answer : b. 5.8-6.5

A spring mass system has time period of oscillation of 0.25 sec. What will be the natural frequency of the system? A 1 Hz B 2 rad sec C 4 rad/sec D 4 Hz

Description : A spring mass system has time period of oscillation of 0.25 sec. What will be the natural frequency of the system? A 1 Hz B 2 rad sec C 4 rad/sec D 4 Hz

Last Answer : D 4 Hz

A 50 Hz, 4-pole, 500 MVA, 22 kV turbo-generator is delivering rated megavolt amperes at 0.8 power factor.

Description : A 50 Hz, 4-pole, 500 MVA, 22 kV turbo-generator is delivering rated megavolt amperes at 0.8 power factor. Suddenly a fault occurs reducing in electric power output by 40%. Neglect losses and assume constant power input to the ... the time of fault will be  (A) 1.528 (B) 1.018 (C) 0.848 (D) 0.509

Last Answer : A 50 Hz, 4-pole, 500 MVA, 22 kV turbo-generator is delivering rated megavolt amperes at 0.8 power factor. Suddenly a fault occurs reducing in electric power output by 40%. Neglect losses and assume ... the shaft. The accelerating torque in the generator in MNm at the time of fault will be 1.018 

Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. A 21 rad/sec B 25.62 rad/sec C 20.22 Hz D 3.15 Hz

Description : Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. A 21 rad/sec B 25.62 rad/sec C 20.22 Hz D 3.15 Hz

Last Answer : B 25.62 rad/sec

A 1 kg mass is suspended by a spring having a stiffness of 0.4 N/mm. Determine the natural frequency. A 20 rad/sec B 30 rad/sec C 20 Hz D 30 Hz

Description : A 1 kg mass is suspended by a spring having a stiffness of 0.4 N/mm. Determine the natural frequency. A 20 rad/sec B 30 rad/sec C 20 Hz D 30 Hz

Last Answer : B 30 rad/sec

What does OMB stand for? A. Optical media board B. Organization of medical biologist C. Optical medium board D. Optimum main board

Description : What does OMB stand for? A. Optical media board B. Organization of medical biologist C. Optical medium board D. Optimum main board

Last Answer : A. Optical media board

To obtain the most reliable sky wave propagation the ____ should be used. A. Lowest useable frequency (LUF). B. Maximum useable frequency (MUF). C. Optimum useable frequency (OUF). D. Critical frequency

Description : To obtain the most reliable sky wave propagation the ____ should be used. A. Lowest useable frequency (LUF). B. Maximum useable frequency (MUF). C. Optimum useable frequency (OUF). D. Critical frequency

Last Answer : C. Optimum useable frequency (OUF).

What is the electrical wavelength of a 500 MHz signal? A. 60 centimeters B. 6 meters C. 0.06 meter D. 60 meters

Description : What is the electrical wavelength of a 500 MHz signal? A. 60 centimeters B. 6 meters C. 0.06 meter D. 60 meters

Last Answer : A. 60 centimeters

What is the wavelength of a signal at 500 MHz? A. 0.062 cm B. 6 meters C. 60 cm D. 60 meters

Description : What is the wavelength of a signal at 500 MHz? A. 0.062 cm B. 6 meters C. 60 cm D. 60 meters

Last Answer : C. 60 cm

The sound intensity received from the nearby jet plane is 12.6 µW/m2 and that from another jet plane some distance away is 0.45 µW/m2 . Find the relative loudness of the two. A. 14.0 dB B. 14.5dB C. 12.5 D. 14.5

Description : The sound intensity received from the nearby jet plane is 12.6 µW/m2 and that from another jet plane some distance away is 0.45 µW/m2 . Find the relative loudness of the two. A. 14.0 dB B. 14.5dB C. 12.5 D. 14.5

Last Answer : B. 14.5dB

What is the gain of an antenna over a half-wavelength dipole when it has 6 dB gain over an isotropic radiator? A. 6.0 dB B. 8.1 dB C. 3.9 dB D. 10.0 dB

Description : What is the gain of an antenna over a half-wavelength dipole when it has 6 dB gain over an isotropic radiator? A. 6.0 dB B. 8.1 dB C. 3.9 dB D. 10.0 dB

Last Answer : C. 3.9 dB

What is the typical velocity factor of coaxial cables? A. 0.6 to 0.8 B. 0.3 to 0.5 C. 0.5 to 0.9 D. 0.4 to 0.6

Description : What is the typical velocity factor of coaxial cables? A. 0.6 to 0.8 B. 0.3 to 0.5 C. 0.5 to 0.9 D. 0.4 to 0.6

Last Answer : A. 0.6 to 0.8

The velocity factor in transmission lines vary from ___ to ___. A. 0.6 to 0.8 B. 0.3 to 0.5 C.0.5 to 0.9 D. 0.8 to 0.9

Description : The velocity factor in transmission lines vary from ___ to ___. A. 0.6 to 0.8 B. 0.3 to 0.5 C.0.5 to 0.9 D. 0.8 to 0.9

Last Answer : C.0.5 to 0.9

The maximum velocity of a body in SHM with amplitude of 150 mm and a frequency 2 vibrations/sec is equal to a.1.885 m/sec b.0.01885 m/sec c.0.1885 m/sec d.18.55 m/sec e.185.5 m/sec

Description : The maximum velocity of a body in SHM with amplitude of 150 mm and a frequency 2 vibrations/sec is equal to a.1.885 m/sec b.0.01885 m/sec c.0.1885 m/sec d.18.55 m/sec e.185.5 m/sec

Last Answer : a. 1.885 m/sec

The total noise power present in a 1-Hz bandwidth . A. Noise density B. Noise figure C. Noise limit D. Noise intensity

Description : The total noise power present in a 1-Hz bandwidth . A. Noise density B. Noise figure C. Noise limit D. Noise intensity

Last Answer : A. Noise density

Reference noise is ___________. A. a 1000 Hz, -90 dBm tone B. a noise that creates the same interfering effect as a 1000Hz, -90dBm tone C. a noise that creates zero dBrn in a voice channel D. B and C above

Description : Reference noise is ___________. A. a 1000 Hz, -90 dBm tone B. a noise that creates the same interfering effect as a 1000Hz, -90dBm tone C. a noise that creates zero dBrn in a voice channel D. B and C above

Last Answer : D. B and C above

What is the reference frequency of CCIT phosphomeric noise measurement? A. 800 HzB. 1000 Hz C. 1500 Hz D. 3400 Hz

Description : What is the reference frequency of CCIT phosphomeric noise measurement? A. 800 Hz B. 1000 Hz C. 1500 Hz D. 3400 Hz

Last Answer : A. 800 Hz

The international pitch A is equivalent to ___ Hz. A. 435 B. 440 C. 260 D. 255

Description : The international pitch A is equivalent to ___ Hz. A. 435 B. 440 C. 260 D. 255

Last Answer : A. 435

The American concert pitch A is equivalent to which if the following frequencies? A. 440 Hz B. 435 Hz C. 260 Hz D. 255 Hz

Description : The American concert pitch A is equivalent to which if the following frequencies? A. 440 Hz B. 435 Hz C. 260 Hz D. 255 Hz

Last Answer : A. 440 Hz

What bandwidth is needed to support a capacity of 128 kbps when the signal power to noise power ratio in decibels is 100? A. 19224 Hz B. 3853 Hz C. 19244 Hz D. 3583 Hz

Description : What bandwidth is needed to support a capacity of 128 kbps when the signal power to noise power ratio in decibels is 100? A. 19224 Hz B. 3853 Hz C. 19244 Hz D. 3583 Hz

Last Answer : B. 3853 Hz

In acoustics, if the volume of the room is 200 m3 then at what frequency the coefficient of absorption is measured? A. 120 kHz B. 120 Hz C. 100 Hz D. 150 Hz

Description : In acoustics, if the volume of the room is 200 m3 then at what frequency the coefficient of absorption is measured? A. 120 kHz B. 120 Hz C. 100 Hz D. 150 Hz

Last Answer : B. 120 Hz

What is considered the threshold of audibility at 3000 Hz? A. 10-12 W/m2 B. 10-16 W/m2 C. 10-12 W/cm2 D. 10-15 W/cm2

Description : What is considered the threshold of audibility at 3000 Hz? A. 10-12 W/m2 B. 10-16 W/m2 C. 10-12 W/cm2 D. 10-15 W/cm2

Last Answer : A. 10-12 W/m2