What is the amount of sound reduction provided by a barrier – wall, floor, or ceiling called? A. Sound Attenuation B. Transmission loss C. Sound absorption D. Barrier loss

What is the amount of sound reduction provided by a barrier – wall, floor, or ceiling called?
A. Sound Attenuation
B. Transmission loss
C. Sound absorption
D. Barrier loss
by

1 Answer

Answer :

B. Transmission loss
by

Related questions

The loss in signal power as light travels down a fiber is called a. Dispersion b. Scattering c. Absorption d. Attenuation

Description : The loss in signal power as light travels down a fiber is called a. Dispersion b. Scattering c. Absorption d. Attenuation

Last Answer : d. Attenuation

Loss due to the diffraction of light when it strikes on the irregularities formed during the manufacturing process of the fiber optics. A. Absorption loss B. Attenuation C. Bending loss D. Rayleigh scattering loss

Description : Loss due to the diffraction of light when it strikes on the irregularities formed during the manufacturing process of the fiber optics. A. Absorption loss B. Attenuation C. Bending loss D. Rayleigh scattering loss

Last Answer : D. Rayleigh scattering loss

ECE Board Exam November 1996 The loss in signal power as light travels down a fiber is A. attenuation B. propagation C. absorption D. scattering

Description : ECE Board Exam November 1996 The loss in signal power as light travels down a fiber is A. attenuation B. propagation C. absorption D. scattering

Last Answer : A. attenuation

The presence of standing waves on a transmission line is the result of A. a high level of attenuation on the line. B. terminating the line by a resistive load equal in value to the surge impedance C. reducing the input power to below its critical level. D. an impedance mismatch between the load and the line.

Description : The presence of standing waves on a transmission line is the result of A. a high level of attenuation on the line. B. terminating the line by a resistive load equal in value to the surge impedance ... input power to below its critical level. D. an impedance mismatch between the load and the line.

Last Answer : D. an impedance mismatch between the load and the line.

Cable attenuation is usually expressed in terms of a. Loss per foot b. dB/km c. intensity per mile d. voltage drop per inch

Description : Cable attenuation is usually expressed in terms of a. Loss per foot b. dB/km c. intensity per mile d. voltage drop per inch

Last Answer : b. dB/km

Reduction of signal strength during transmission is called attenuation. -Technology

Description : Reduction of signal strength during transmission is called attenuation. -Technology

Last Answer : TrueDuring transmission, the signal strength is reduced, this phenomenon is called attenuation.

The loss in signal power as light travels down a fiber is called ∙ a. Dispersion ∙ b. Scattering ∙ c. Absorption ∙ d. Attenuation

Description : The loss in signal power as light travels down a fiber is called ∙ a. Dispersion ∙ b. Scattering ∙ c. Absorption ∙ d. Attenuation

Last Answer : ∙ d. Attenuation

Band loss is ∙ a. A reduction in transmitter power caused by earth’s surface curvature ∙ b. A reduction in strength of the signal caused by folded dipole bends ∙ c. An attenuation increase caused by bends radiating from the side of the fiber ∙ d. All of these

Description : Band loss is ∙ a. A reduction in transmitter power caused by earth’s surface curvature ∙ b. A reduction in strength of the signal caused by folded dipole bends ∙ c. An attenuation increase caused by bends radiating from the side of the fiber ∙ d. All of these

Last Answer : c. An attenuation increase caused by bends radiating from the side of the fiber

Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog conversion at the start of a long distance transmission? A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above

Description : Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog ... A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above

Last Answer : Modem

A porous material is far more efficient at high than low frequency absorption. How to improve sound absorption at lower frequencies using this absorber? A. Increase the thickness B. Decrease the thickness C. Mount with and airspace behind D. Both A and C above

Description : A porous material is far more efficient at high than low frequency absorption. How to improve sound absorption at lower frequencies using this absorber? A. Increase the thickness B. Decrease the thickness C. Mount with and airspace behind D. Both A and C above

Last Answer : D. Both A and C above

An entity, relying on the transmission, switching and local distribution facilities of local exchange and inter-exchange operators, and overseas carriers, offers enhanced services beyond those ordinarily provided by such carriers. A. International carrier B. Value-added service provided C. Inter-exchange carrier D. Local exchange carrier

Description : An entity, relying on the transmission, switching and local distribution facilities of local exchange and inter-exchange operators, and overseas carriers, offers enhanced services beyond those ordinarily ... B. Value-added service provided C. Inter-exchange carrier D. Local exchange carrier

Last Answer : B. Value-added service provided

The upper pulse rate and information carrying capacity of a cable is limited by a. Pulse shortening b. Attenuation c. Light leakage d. Modal dispersion

Description : The upper pulse rate and information carrying capacity of a cable is limited by a. Pulse shortening b. Attenuation c. Light leakage d. Modal dispersion

Last Answer : d. Modal dispersion

Which of the cable length has the highest attenuation? a. 1 km b. 2 km c. 95 ft d. 5500 ft

Description : Which of the cable length has the highest attenuation? a. 1 km b. 2 km c. 95 ft d. 5500 ft

Last Answer : b. 2 km

What is the free space attenuation of a satellite communications system operating at 36,000 km above the earth at 5.0 GHz? A. 198 dB B. 202 dB C. 142 dB D. 138 dB

Description : What is the free space attenuation of a satellite communications system operating at 36,000 km above the earth at 5.0 GHz? A. 198 dB B. 202 dB C. 142 dB D. 138 dB

Last Answer : A. 198 dB

_________ is the random and unpredictable electric signals from natural causes, both internal and external to the system. A. Interference B. Attenuation C. Distortion D. Noise

Description : _________ is the random and unpredictable electric signals from natural causes, both internal and external to the system. A. Interference B. Attenuation C. Distortion D. Noise

Last Answer : D. Noise

What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Description : What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Last Answer : C. 125,000

Atmospheric attenuation is an attenuation which is due to A. mist and fog B. gasses in the atmosphere C. water vapor and oxygen D. rain

Description : Atmospheric attenuation is an attenuation which is due to A. mist and fog B. gasses in the atmosphere C. water vapor and oxygen D. rain

Last Answer : C. water vapor and oxygen

Which of the following phenomena is possible is free space medium? A. Reflection of radio wave B. Diffraction of radio wave C. Refraction of radio wave D. Attenuation of radio wave

Description : Which of the following phenomena is possible is free space medium? A. Reflection of radio wave B. Diffraction of radio wave C. Refraction of radio wave D. Attenuation of radio wave

Last Answer : D. Attenuation of radio wave

What is the current frequency band given most attenuation for satellite communications? A. Ku B. C band C. J D. P

Description : What is the current frequency band given most attenuation for satellite communications? A. Ku B. C band C. J D. P

Last Answer : A. Ku

What is the path attenuation between transmitter and receiver at a frequency of 1.2 Ghz and a distance of 11,000 mi? A. 119 dB B. 115dB C. 179dB D. 174dB

Description : What is the path attenuation between transmitter and receiver at a frequency of 1.2 Ghz and a distance of 11,000 mi? A. 119 dB B. 115dB C. 179dB D. 174dB

Last Answer : C. 179dB

What frequency does oxygen causes excessive attenuation A. 119 GHz B. 183 GHz C. 310 GHz D. 60 GHz

Description : What frequency does oxygen causes excessive attenuation A. 119 GHz B. 183 GHz C. 310 GHz D. 60 GHz

Last Answer : D. 60 GHz

Which is atmospheric attenuation? A. Attenuation due to rain B. Attenuation due to other gasses C. Attenuation due to mist and fog D. Due to water vapor and oxygen

Description : Which is atmospheric attenuation? A. Attenuation due to rain B. Attenuation due to other gasses C. Attenuation due to mist and fog D. Due to water vapor and oxygen

Last Answer : D. Due to water vapor and oxygen

The random and unpredictable electric signal from natural causes, both internal and external to the system is know as ________. A. Distortion B. Noise C. Attenuation D. Interference

Description : The random and unpredictable electric signal from natural causes, both internal and external to the system is know as ________. A. Distortion B. Noise C. Attenuation D. Interference

Last Answer : B. Noise

ECE Board Exam November 1996 What is the applied power if a thermal RF wattmeter is connected to a transmitter through a variable attenuator? The wattmeter reads 84 mW when 15 dB of attenuation is used. A. 4.656 watts B. 2.656 watts C. 3.656 watts D. 2.856 watts

Description : ECE Board Exam November 1996 What is the applied power if a thermal RF wattmeter is connected to a transmitter through a variable attenuator? The wattmeter reads 84 mW when 15 dB of attenuation is used. A. 4.656 watts B. 2.656 watts C. 3.656 watts D. 2.856 watts

Last Answer : B. 2.656 watts

ECE Board Exam November 1996 What is the applied power if a thermal RF wattmeter is connected to a transmitter through a variable attenuator? The wattmeter reads 84 mW when 15 dB of attenuation is used. A. 4.656 watts B. 2.656 watts C. 3.656 watts D. 2.856 watts

Description : ECE Board Exam November 1996 What is the applied power if a thermal RF wattmeter is connected to a transmitter through a variable attenuator? The wattmeter reads 84 mW when 15 dB of attenuation is used. A. 4.656 watts B. 2.656 watts C. 3.656 watts D. 2.856 watts

Last Answer : A. PAM

Noise reduction system used for film sound in movie A. dBx B. dolby C. dBa D. dBm

Description : Noise reduction system used for film sound in movie A. dBx B. dolby C. dBa D. dBm

Last Answer : B. dolby

An absorption loss caused by valence electrons in the silica material from which fibers are manufactured. A. Modal dispersion B. Infrared absorption C. Ion resonance absorption D. Ultraviolet absorption

Description : An absorption loss caused by valence electrons in the silica material from which fibers are manufactured. A. Modal dispersion B. Infrared absorption C. Ion resonance absorption D. Ultraviolet absorption

Last Answer : D. Ultraviolet absorption

A third symbol radio emission which represent telephone transmission including sound broadcasting. A. W B. F C. C D. E

Description : A third symbol radio emission which represent telephone transmission including sound broadcasting. A. W B. F C. C D. E

Last Answer : D. E

_______ is the transmission of sound from one room to an adjacent room thru common walls, floors or ceilings. A. Reverberation B. Refraction C. Flanking transmission D. Reflection

Description : _______ is the transmission of sound from one room to an adjacent room thru common walls, floors or ceilings. A. Reverberation B. Refraction C. Flanking transmission D. Reflection

Last Answer : C. Flanking transmission

____________ is the average rate of transmission of sound energy in a given direction through a cross sectional area of 1 sq.m. at right angle to the direction. A. Sound pressure B. Sound intensity C. Pressure variation D. Loudness

Description : ____________ is the average rate of transmission of sound energy in a given direction through a cross sectional area of 1 sq.m. at right angle to the direction. A. Sound pressure B. Sound intensity C. Pressure variation D. Loudness

Last Answer : B. Sound intensity

The following are the cause of light attenuation in fiber optics except ∙ a. Backscattering ∙ b. Absorption ∙ c. Refraction ∙ d. Microbends

Description : The following are the cause of light attenuation in fiber optics except ∙ a. Backscattering ∙ b. Absorption ∙ c. Refraction ∙ d. Microbends

Last Answer : c. Refraction

As electromagneticwavestravelinfree space, onlyone ofthefollowingcan happento them: a. absorption b. attenuation c. refraction d. reflection

Description : As electromagneticwavestravelinfree space, onlyone ofthefollowingcan happento them: a. absorption b. attenuation c. refraction d. reflection

Last Answer : b. attenuation

What is meant by antenna gain? A. The final amplifier gain minus the transmission line losses (including any phasing lines present) B. The ratio of the amount of power produced by the antenna compared to the output power of the transmitter C. The ratio of the signal in the backward direction D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

Description : What is meant by antenna gain? A. The final amplifier gain minus the transmission line losses (including any phasing lines present) B. The ratio of the amount of power produced by the antenna ... D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

Last Answer : D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

What is barrier potential?

Description : What is barrier potential?

Last Answer : Because of the oppositely charged ions present on both sides of PN junction an electric potential is established across the junction even without any external voltage source which is termed as barrier potential.

The total space loss of transmission and reception for two ground stations with uplink frequency 8GHz and a downlink of 6 GHz with angle of elevations of 3˚ and 7˚ A respectively is A. 403 dB B. 100 dB C. 20 dB D. 215 dB

Description : The total space loss of transmission and reception for two ground stations with uplink frequency 8GHz and a downlink of 6 GHz with angle of elevations of 3˚ and 7˚ A respectively is A. 403 dB B. 100 dB C. 20 dB D. 215 dB

Last Answer : A. 403 dB

Which of the following characterizes a properly terminated transmission line? A. The line loss is minimum. B. The standing wave ratio is minimum. C. The input impedance is twice the load impedance. D. The standing wave ratio is one.

Description : Which of the following characterizes a properly terminated transmission line? A. The line loss is minimum. B. The standing wave ratio is minimum. C. The input impedance is twice the load impedance. D. The standing wave ratio is one.

Last Answer : D. The standing wave ratio is one.

If a transmission line has a power loss of 6 dB per 100 feet, what is the power at the feed point to the antenna at the end of a 200 foot transmission line fed by a 100 watt transmitter? A. 70 watts B. 50 watts C. 25 watts D. 6 watts

Description : If a transmission line has a power loss of 6 dB per 100 feet, what is the power at the feed point to the antenna at the end of a 200 foot transmission line fed by a 100 watt transmitter? A. 70 watts B. 50 watts C. 25 watts D. 6 watts

Last Answer : D. 6 watts

A properly matched transmission line has a loss of 1.5 dB/100m. if 10 W is supplied to one end of the line, how many watts reach the load, 27 m away? A. 10 W B. 7.2 W C. 9.9 W D. 9.1 W

Description : A properly matched transmission line has a loss of 1.5 dB/100m. if 10 W is supplied to one end of the line, how many watts reach the load, 27 m away? A. 10 W B. 7.2 W C. 9.9 W D. 9.1 W

Last Answer : D. 9.1 W

The standard deviation of the variation in the transmission loss of a circuit should not exceed A. 3 dB B. 1 dB C. 5 dB D. 0.5dB

Description : The standard deviation of the variation in the transmission loss of a circuit should not exceed A. 3 dB B. 1 dB C. 5 dB D. 0.5dB

Last Answer : B. 1 dB

If the terminating impedance is exactly equal to the characteristic impedance of the transmission line the return loss is ___________. A. zero B. one C. infinite D. None of these

Description : If the terminating impedance is exactly equal to the characteristic impedance of the transmission line the return loss is ___________. A. zero B. one C. infinite D. None of these

Last Answer : C. infinite

Results in reduction in the power of light wave as it travels down the cable. ∙ A. power loss ∙ B. absorption loss ∙ C. resistive loss ∙ D. heat loss

Description : Results in reduction in the power of light wave as it travels down the cable. ∙ A. power loss ∙ B. absorption loss ∙ C. resistive loss ∙ D. heat loss

Last Answer : A. power loss

If temperature change is 19°C, what amount of change to sound velocity is possible? A. 11.53 ft/s B. 11.53 m/s C. 19.304 ft/s D. 19.304 m/s

Description : If temperature change is 19°C, what amount of change to sound velocity is possible? A. 11.53 ft/s B. 11.53 m/s C. 19.304 ft/s D. 19.304 m/s

Last Answer : B. 11.53 m/s

_______ is a typeof transmission impairment in which an outside sourcesuch as crosstalk corrupts asignal. A) Attenuation B) Distortion C) Noise D) Decibel

Description : _______ is a typeof transmission impairment in which an outside sourcesuch as crosstalk corrupts asignal. A) Attenuation B) Distortion C) Noise D) Decibel

Last Answer : Noise

________ is a typeof transmission impairment in which the signal loses strength due to the different propagation speeds of each frequency that makes up the signal. A) Attenuation B) Distortion C) Noise D) Decibel

Description : ________ is a typeof transmission impairment in which the signal loses strength due to the different propagation speeds of each frequency that makes up the signal. A) Attenuation B) Distortion C) Noise D) Decibel

Last Answer : Distortion

________ is a typeof transmission impairment in which the signal loses strength due to theresistance of the transmission medium. A) Attenuation B) Distortion C) Noise D) Decibel

Description : ________ is a typeof transmission impairment in which the signal loses strength due to theresistance of the transmission medium. A) Attenuation B) Distortion C) Noise D) Decibel

Last Answer : Attenuation

What three factors must be considered in the transmission of a surface wave to reduce attenuation?

Description : What three factors must be considered in the transmission of a surface wave to reduce attenuation?

Last Answer : (a) electrical properties of the terrain (b) frequency (c) polarization of the antenna

..................... is a type of transmission impairment in which the signal loses strength due to the resistance of the transmission medium. (A) Attenuation (B) Distortion (C) Noise (D) Decibel

Description : ..................... is a type of transmission impairment in which the signal loses strength due to the resistance of the transmission medium. (A) Attenuation (B) Distortion (C) Noise (D) Decibel

Last Answer : (A) Attenuation

Compared to ****/beef insulins, the human insulins: A. Are more potent B. Have a faster kinetics of absorption and elimination C. Have longer biological action half life D. Penetrate blood-brain barrier more efficiently

Description : Compared to pork/beef insulins, the human insulins: A. Are more potent B. Have a faster kinetics of absorption and elimination C. Have longer biological action half life D. Penetrate blood-brain barrier more efficiently

Last Answer : B. Have a faster kinetics of absorption and elimination

What could cause the ceiling above the shower in my bottom floor apartment to cave in?

Description : What could cause the ceiling above the shower in my bottom floor apartment to cave in?

Last Answer : I can't tell you, but I can say that this happened to me years ago. The landlord had the second-floor unit and I was on the first floor. One night (luckily when I was not in the shower) ... course, but it sure cramped my style for a little while there. I hope you notified your landlord right away.

Would you like to live in an apartment with floor to ceiling glass walls?

Description : Would you like to live in an apartment with floor to ceiling glass walls?

Last Answer : Only if it was high enough to be above the tops of surrounding buildings.