Electronic equipment used to measure standing wave ration. A. Reflectometer B. Wavemeter C. Altimeter D. Multimeter

Electronic equipment used to measure standing wave ration.
A. Reflectometer
B. Wavemeter
C. Altimeter
D. Multimeter
by

1 Answer

Answer :

A. Reflectometer
by

Related questions

Which tester is used to measure SWR? A. Spectrum analyzer B. Multimeter C. Reflectometer D. Oscilloscope

Description : Which tester is used to measure SWR? A. Spectrum analyzer B. Multimeter C. Reflectometer D. Oscilloscope

Last Answer : C. Reflectometer

What device measures the angle between two radio frequencies and also the direction of propagation of a wave? A. Densimeter B. Absorption wavemeter C. Goniometer D. Ergometer

Description : What device measures the angle between two radio frequencies and also the direction of propagation of a wave? A. Densimeter B. Absorption wavemeter C. Goniometer D. Ergometer

Last Answer : C. Goniometer

What type of transmission is radiated from an aircraft’s radio altimeter antenna? A. An amplitude modulated continuous wave B. A pulse position modulated UHF signal C. A differential phase shift keyed UHF signal D. A frequency modulated continuous wave

Description : What type of transmission is radiated from an aircraft’s radio altimeter antenna? A. An amplitude modulated continuous wave B. A pulse position modulated UHF signal C. A differential phase shift keyed UHF signal D. A frequency modulated continuous wave

Last Answer : D. A frequency modulated continuous wave

Differentiate between the following pairs: (a) Telemeter and Multimeter: (b) Perimeter and Altimeter (c) Periscope and Microscope (d) Nucleon and Photon (e) Cusec and Comet

Description : Differentiate between the following pairs: (a) Telemeter and Multimeter: (b) Perimeter and Altimeter (c) Periscope and Microscope (d) Nucleon and Photon (e) Cusec and Comet

Last Answer : (a) Telemeter and Multimeter: Telemeter is used to convey the physical statistics to a distance, while a multimeter is a complex device, having a potentiometer and ammeter. (b) Perimeter and Altimeter Perimeter is ... packet. (e) Cusec and Comet Cusec is a measure of flow, while comet is an object.

___________ is device that measures the internal open circuit voltage of an equivalent noise generator having an impedance of 600Ω and delivering noise power to a 600 Ω load. A. Psophometer B. Barometer C. Reflectometer D. Voltmeter

Description : ___________ is device that measures the internal open circuit voltage of an equivalent noise generator having an impedance of 600Ω and delivering noise power to a 600 Ω load. A. Psophometer B. Barometer C. Reflectometer D. Voltmeter

Last Answer : A. Psophometer

One of the following is referred to as a major component of an optical time domain reflectometer A. Pulse generator and vertical plate B. Laser and horizontal plate C. Pulse generator laser D. Vertical and horizontal plate

Description : One of the following is referred to as a major component of an optical time domain reflectometer A. Pulse generator and vertical plate B. Laser and horizontal plate C. Pulse generator laser D. Vertical and horizontal plate

Last Answer : C. Pulse generator laser

When troubleshooting electronic equipment, you should use a high impedance multimeter ________________. A. to prevent excess current flow through the meter that would damage it B. for AC measurements only and a low resistance meter for DC measurements C. whenever a low impedance meter is not available, regardless of the components being tested D. so as not to load down the circuit and obtain erroneous voltage readings

Description : When troubleshooting electronic equipment, you should use a high impedance multimeter ________________. A. to prevent excess current flow through the meter that would damage it B. for AC measurements only ... being tested D. so as not to load down the circuit and obtain erroneous voltage readings

Last Answer : Answer: D

What instrument normally measures the virtual height of ionosphere? A. Ionosonde B. Altimeter C. Field meter D. Radar

Description : What instrument normally measures the virtual height of ionosphere? A. Ionosonde B. Altimeter C. Field meter D. Radar

Last Answer : A. Ionosonde

What is the frequency range of an aircraft’s radio altimeter? A. 962 MHz to 1213 MHz B. 329.15 MHz to 335.00 MHz C. 4250 MHz to 4350 MHz D. 108.00 MHz to 117.95 MHz

Description : What is the frequency range of an aircraft’s radio altimeter? A. 962 MHz to 1213 MHz B. 329.15 MHz to 335.00 MHz C. 4250 MHz to 4350 MHz D. 108.00 MHz to 117.95 MHz

Last Answer : C. 4250 MHz to 4350 MHz

It is useful to refer to an isotropic radiator. A. when comparing the gains of directional antennas B. when testing a transmission line for standing wave ratio C. when (in the northern hemisphere) directing the transmission D. when using a dummy load to tune a transmitter

Description : It is useful to refer to an isotropic radiator. A. when comparing the gains of directional antennas B. when testing a transmission line for standing wave ratio C. when (in the northern hemisphere) directing the transmission D. when using a dummy load to tune a transmitter

Last Answer : A. when comparing the gains of directional antennas

Which of the following characterizes a properly terminated transmission line? A. The line loss is minimum. B. The standing wave ratio is minimum. C. The input impedance is twice the load impedance. D. The standing wave ratio is one.

Description : Which of the following characterizes a properly terminated transmission line? A. The line loss is minimum. B. The standing wave ratio is minimum. C. The input impedance is twice the load impedance. D. The standing wave ratio is one.

Last Answer : D. The standing wave ratio is one.

Determine the standing wave ratio of a 300-Ω line whose load is 400+j150 Ω. A. 3.55 B. 1.67 C. 5.53 D. 3.35

Description : Determine the standing wave ratio of a 300-Ω line whose load is 400+j150 Ω. A. 3.55 B. 1.67 C. 5.53 D. 3.35

Last Answer : B. 1.67

When is it useful to refer to an isotropic radiator? A. When comparing the gains of directional antennas B. When testing a transmission line for standing wave ratio C. When (in the northern hemisphere) directing the transmission in a southerly direction D. When using a dummy load to tune a transmitter

Description : When is it useful to refer to an isotropic radiator? A. When comparing the gains of directional antennas B. When testing a transmission line for standing wave ratio C. When (in the northern ... ) directing the transmission in a southerly direction D. When using a dummy load to tune a transmitter

Last Answer : A. When comparing the gains of directional antennas

What is the term for the ratio of actual velocity at which a signal travels through a line to the speed of light in a vacuum? A. Velocity factor B. Characteristic impedance C. Surge impedance D. Standing wave ratio

Description : What is the term for the ratio of actual velocity at which a signal travels through a line to the speed of light in a vacuum? A. Velocity factor B. Characteristic impedance C. Surge impedance D. Standing wave ratio

Last Answer : A. Velocity factor

An RG-11/U foam coaxial cable has a maximum voltage standing wave of 52 V and a minimum voltage of 17 V. Find the value of the resistive load. A. 24.59Ω B. Either A or C C. 228.75Ω D. Neither A nor C

Description : An RG-11/U foam coaxial cable has a maximum voltage standing wave of 52 V and a minimum voltage of 17 V. Find the value of the resistive load. A. 24.59Ω B. Either A or C C. 228.75Ω D. Neither A nor C

Last Answer : B. Either A or C

The standing wave ratio is equal to ________ if the load is properly matched with the transmission line. A. 1 B. 50 C. 10 D. 2

Description : The standing wave ratio is equal to ________ if the load is properly matched with the transmission line. A. 1 B. 50 C. 10 D. 2

Last Answer : A. 1

What is the term for the ration of the radiation resistance of an antenna to the total resistance of the system? A. Effective radiated power B. Beamwidth C. Radiation conversion loss D. Antenna efficiency

Description : What is the term for the ration of the radiation resistance of an antenna to the total resistance of the system? A. Effective radiated power B. Beamwidth C. Radiation conversion loss D. Antenna efficiency

Last Answer : D. Antenna efficiency

Which of the following is and impedance matching ration of coax balun? A. 2:8 B. 1:2 C. 4:1 D. 2:1

Description : Which of the following is and impedance matching ration of coax balun? A. 2:8 B. 1:2 C. 4:1 D. 2:1

Last Answer : C. 4:1

An increase in the effective power radiated by an antenna in a certain desired direction at the expense of power radiated in other directions. A. Antenna gain B. Antenna back lobe ration C. Antenna total ration D. Antenna efficiency

Description : An increase in the effective power radiated by an antenna in a certain desired direction at the expense of power radiated in other directions. A. Antenna gain B. Antenna back lobe ration C. Antenna total ration D. Antenna efficiency

Last Answer : A. Antenna gain

The key electronic component in a communications satellite is the A. telemetry equipment B. on-board computer C. command and control system D. transponder

Description : The key electronic component in a communications satellite is the A. telemetry equipment B. on-board computer C. command and control system D. transponder

Last Answer : D. transponder

Atoms of different elements have (1) same atomic number and same electronic configuration (2) different atomic number and same eletronic configu-ration (3) different atomic number and different number of valence electrons (4) same number of electrons and neutrons

Description : Atoms of different elements have (1) same atomic number and same electronic configuration (2) different atomic number and same eletronic configu-ration (3) different atomic number and different number of valence electrons (4) same number of electrons and neutrons

Last Answer : different atomic number and different number of valence electrons

Radio activity is due to (1) unstable nucleus (2) stable nucleus (3) stable electronic configu-ration (4) stable electronic configu-ration

Description : Radio activity is due to (1) unstable nucleus (2) stable nucleus (3) stable electronic configu-ration (4) stable electronic configu-ration 

Last Answer :  unstable nucleus

Which instrument is used to measure altitudes in aircraft’s? (1) Audiometer (2) Ammeter (3) Altimeter (4) Anemometer

Description : Which instrument is used to measure altitudes in aircraft’s? (1) Audiometer (2) Ammeter (3) Altimeter (4) Anemometer

Last Answer : (3) Altimeter Explanation: Ammeter - Measures strength of electric current. Audiometer - Measures intensity of sound. Anemometer - Measures force and velocity of wind and directions.

Instrument used to measure the force and velocity of the wind is – (1) Ammeter (2) Anemometer (3) Altimeter (4) Audiometer

Description : Instrument used to measure the force and velocity of the wind is – (1) Ammeter (2) Anemometer (3) Altimeter (4) Audiometer

Last Answer : (2) Anemometer Explanation: An anemometer is a device for measuring wind speed, and is a common weather station instrument. The term is derived from the Greek word anemos, meaning wind, and ... between the pressure and the speed, an anemometer designed for one will give information about both.

The instrument which uses sound waves to measure the depth of oceans is – (1) Radar (2) Sonar (3) Altimeter (4) Venturimeter

Description : The instrument which uses sound waves to measure the depth of oceans is – (1) Radar (2) Sonar (3) Altimeter (4) Venturimeter

Last Answer : (2) Sonar Explanation: The instrument which uses sound waves to measure the depth of oceans is sonar. Sound waves can travel much faster from one point to another. Sound waves are far more ... Sonar may also be used in air for robot navigation, and SODAR is used for atmospheric investigations.

The instrument used to measure the speed of the wind is – (1) Altimeter (2) Anemometer (3) Chronometer (4) Dosimeter

Description : The instrument used to measure the speed of the wind is – (1) Altimeter (2) Anemometer (3) Chronometer (4) Dosimeter

Last Answer : (2) Anemometer Explanation: An anemometer is a device for measuring wind speed, and is a common weather station instrument. The term is derived from the Greek word anemos, meaning wind, ... aerodynamics. The first known description of an anemometer was given by Leon Battista Alberti around 1450.

Which apparatus is used to measure the intensity of light? (1) Lux meter (2) Calorimeter (3) Anemometer (4) Altimeter

Description : Which apparatus is used to measure the intensity of light? (1) Lux meter (2) Calorimeter (3) Anemometer (4) Altimeter

Last Answer : Lux meter

The instrument used to measure the speed of the wind is (1) Altimeter (2) Anemometer (3) Chronometer (4) Dosimeter

Description : The instrument used to measure the speed of the wind is (1) Altimeter (2) Anemometer (3) Chronometer (4) Dosimeter

Last Answer : Anemometer

Instrument used to measure the force and velocity of the wind is (1) Ammeter (2) Anemometer (3) Altimeter (4) Audiometer

Description : Instrument used to measure the force and velocity of the wind is (1) Ammeter (2) Anemometer (3) Altimeter (4) Audiometer

Last Answer : Anemometer

The instrument which uses sound waves to measure the depth of oceans is (1) Radar (2) Sonar (3) Altimeter (4) Venturimeter

Description : The instrument which uses sound waves to measure the depth of oceans is (1) Radar (2) Sonar (3) Altimeter (4) Venturimeter

Last Answer : Sonar

Before servicing the device indicated as 'A' in panels #1 and #3 of the illustration, the device labeled 'CT' must __________. EL-0003 A. have the disconnected leads taped to prevent short circuiting. B. only be connected to multimeter on the ammeter setting C. be short circuited D. have one lead grounded to discharge static electricity for the prevention of damage to electronic components

Description : Before servicing the device indicated as 'A' in panels #1 and #3 of the illustration, the device labeled 'CT' must __________. EL-0003 A. have the disconnected leads taped to prevent ... D. have one lead grounded to discharge static electricity for the prevention of damage to electronic components

Last Answer : Answer: C

How is an overload condition indicated by the electronic digital multimeter?

Description : How is an overload condition indicated by the electronic digital multimeter?

Last Answer : Simultaneous flashing of display readouts

Power for the electronic digital multimeter is normally supplied by what internal power source?

Description : Power for the electronic digital multimeter is normally supplied by what internal power source?

Last Answer : Rechargeable batteries.

What test equipment is designed to generate, modify, or measure a range of parameters of electronic functions of a specific nature required to test a single system or equipment?

Description : What test equipment is designed to generate, modify, or measure a range of parameters of electronic functions of a specific nature required to test a single system or equipment?

Last Answer : Special-purpose electronic test equipment.

A multimeter is used to measure – (1) current (2) voltage (3) resistance (4) All of the above

Description : A multimeter is used to measure – (1) current (2) voltage (3) resistance (4) All of the above

Last Answer : (4) All of the above Explanation: A multimeter or a multitester, also known as a VOM (Volt-Ohm meter), is an electronic measuring instrument that combines several measurement functions in ... or digital circuits-analog multimeters (AMM) and digital multimeters (often abbreviated DMM or DVOM.)

When reading AC current with the multimeter shown in the illustration and you are unsure of the range, the range switch should be set to ___________. EL-0047 A. 10 MA/ 10 AMP with leads in the (-10 A) and (+10 A) jacks B. 10 MA/ 10 AMP with leads in the (-COMMON) and (+) jacks C. 10 MA/ 10 AMP with leads in the (-COMMON) and (+10 A) jacks D. unable to measure AC current with this multimeter

Description : When reading AC current with the multimeter shown in the illustration and you are unsure of the range, the range switch should be set to ___________. EL-0047 A. 10 MA/ 10 AMP with leads in the (-10 A ... leads in the (-COMMON) and (+10 A) jacks D. unable to measure AC current with this multimeter

Last Answer : Answer: D

A multimeter can be used to directly measure _____________. A. watts B. field flux C. current D. all of the above

Description : A multimeter can be used to directly measure _____________. A. watts B. field flux C. current D. all of the above

Last Answer : Answer: C

A multimeter can be used to measure _____________. A. resistance B. voltage C. current D. all of the above

Description : A multimeter can be used to measure _____________. A. resistance B. voltage C. current D. all of the above

Last Answer : Answer: D

You are calibrating a multimeter using internal batteries to supply power for resistance measurements. However, you are unable to adjust the pointer to 'zero' using the adjustment knob. Therefore, you should _____________. A. replace the batteries in the instrument B. measure resistance by dividing the voltmeter indication by the ammeter indication C. set the pointer using a bridge D. change scales to the R X 100 scale and adjust using the 'zero ohms' adjusting knob

Description : You are calibrating a multimeter using internal batteries to supply power for resistance measurements. However, you are unable to adjust the pointer to 'zero' using the adjustment knob. Therefore, you should ... change scales to the R X 100 scale and adjust using the 'zero ohms' adjusting knob

Last Answer : Answer: A

Which of the listed statements is correct when using an analog multimeter as an ohmmeter? A. The pointer should be adjusted to zero each time a new resistance range is selected. B. The pointer will move to infinity when the meter is not in use. C. Ohmmeters are not sufficiently sized to measure conductor insulation resistance. D. All of the above.

Description : Which of the listed statements is correct when using an analog multimeter as an ohmmeter? A. The pointer should be adjusted to zero each time a new resistance range is selected. B. The ... C. Ohmmeters are not sufficiently sized to measure conductor insulation resistance. D. All of the above.

Last Answer : Answer: D

A multimeter is used to measure (1) current (2) voltage (3) resistance (4) All of the above

Description : A multimeter is used to measure (1) current (2) voltage (3) resistance (4) All of the above

Last Answer : All of the above 

What is the main advantage of using a time-domain reflectometer (tdr) to test a transmission line?

Description : What is the main advantage of using a time-domain reflectometer (tdr) to test a transmission line?

Last Answer : Tdr will indicate the nature of and the distance to or location of any faults.

OTDR stands for ∙ a. Optical Time Domain Reflectometer ∙ b. Optical Transmit Direction Return ∙ c. Optical Time Domain Time Regeneration ∙ d. Overtime Direct Reference

Description : OTDR stands for ∙ a. Optical Time Domain Reflectometer ∙ b. Optical Transmit Direction Return ∙ c. Optical Time Domain Time Regeneration ∙ d. Overtime Direct Reference

Last Answer : c. Optical Time Domain Time Regeneration

OTDR stands for: a. Optical Time-Delay Response b. Optical Timing Delay Requirement c. Optical Time-Domain Reflectometer d. Optical Time-Division Relay

Description : OTDR stands for: a. Optical Time-Delay Response b. Optical Timing Delay Requirement c. Optical Time-Domain Reflectometer d. Optical Time-Division Relay

Last Answer : c. Optical Time-Domain Reflectometer

The presence of standing waves on a transmission line is the result of A. a high level of attenuation on the line. B. terminating the line by a resistive load equal in value to the surge impedance C. reducing the input power to below its critical level. D. an impedance mismatch between the load and the line.

Description : The presence of standing waves on a transmission line is the result of A. a high level of attenuation on the line. B. terminating the line by a resistive load equal in value to the surge impedance ... input power to below its critical level. D. an impedance mismatch between the load and the line.

Last Answer : D. an impedance mismatch between the load and the line.

What do you call the energy that was not radiated into space or completely transmitted? A. Incident waves B. Captured waves C. Standing waves D. Modulated waves

Description : What do you call the energy that was not radiated into space or completely transmitted? A. Incident waves B. Captured waves C. Standing waves D. Modulated waves

Last Answer : C. Standing waves

Energy that has neither been radiated into space nor completely transmitted. A. Captured waves B. Incident waves C. Standing waves D. Modulated waves

Description : Energy that has neither been radiated into space nor completely transmitted. A. Captured waves B. Incident waves C. Standing waves D. Modulated waves

Last Answer : C. Standing waves

Name one or more sources of noise bearing on electronic communications. A. Steam boiler B. Galaxies C. Internal combustion engine D. Both B and C

Description : Name one or more sources of noise bearing on electronic communications. A. Steam boiler B. Galaxies C. Internal combustion engine D. Both B and C

Last Answer : D. Both B and C

Types of electronic oscillator?

Description : Types of electronic oscillator?

Last Answer : There are two main types of electronic oscillator: the harmonic oscillator and the relaxation oscillator.

Application of electronic oscillator?

Description : Application of electronic oscillator?

Last Answer : An electronic oscillator is an electronic circuit that produces a repetitive electronic signal, often a sine wave or a square wave. They are widely used in innumerable electronic devices. Common ... regulate computers and quartz clocks, and the sounds produced by electronic beepers and video games.