All bits in character are sent and received ______ in serial port. A. In groups of 3 bits B. One at a time C. In groups of 2 bits D. Simultaneously

All bits in character are sent and received ______ in serial port.
A. In groups of 3 bits
B. One at a time
C. In groups of 2 bits
D. Simultaneously
by

1 Answer

Answer :

B. One at a time
by

Related questions

Transmission sent in both directions simultaneously. A. Full duplex B. Duplex C. Half duplex D. Simplex

Description : Transmission sent in both directions simultaneously. A. Full duplex B. Duplex C. Half duplex D. Simplex

Last Answer : B. Duplex

Transmission sent in both directions simultaneously. A. Full duplex B. Duplex C. Half duplex D. Simplex

Description : Transmission sent in both directions simultaneously. A. Full duplex B. Duplex C. Half duplex D. Simplex

Last Answer : B. Duplex

Serial port interrupt is generated, if ____ bits are seta) IE b) RI, IE c) IP, TI d) RI, TI

Description : Serial port interrupt is generated, if ____ bits are seta) IE b) RI, IE c) IP, TI d) RI, TI

Last Answer : d) RI, TI

Serial port interrupt is generated, if ____ bits are set a) IE b) RI, IE c) IP, TI d) RI, TI

Description : Serial port interrupt is generated, if ____ bits are set a) IE b) RI, IE c) IP, TI d) RI, TI

Last Answer : a) IE

Serial port interrupt is generated, if ____ bits are set a) IE b) RI, IE c) IP, TI d) RI, TI

Description : Serial port interrupt is generated, if ____ bits are set a) IE b) RI, IE c) IP, TI d) RI, TI

Last Answer : d) RI, TI

How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

What do you call a short bit sequence sent typically 128 bits in digital signatures? A. Hash B. Public key C. Private key D. Password

Description : What do you call a short bit sequence sent typically 128 bits in digital signatures? A. Hash B. Public key C. Private key D. Password

Last Answer : A. Hash

______ is known to be the first satellite capable of receiving and transmitting simultaneously. A. Syncom I B. Telstar I C. Score D. Aguila

Description : ______ is known to be the first satellite capable of receiving and transmitting simultaneously. A. Syncom I B. Telstar I C. Score D. Aguila

Last Answer : B. Telstar I

______ is a device that detects both vertically and horizontally polarized signals simultaneously. A. Crystal B. Orthomode transducer C. Light transducer D. Optoisolator

Description : ______ is a device that detects both vertically and horizontally polarized signals simultaneously. A. Crystal B. Orthomode transducer C. Light transducer D. Optoisolator

Last Answer : B. Orthomode transducer

Codes must be A. agreed upon in advance between sender and receiver B. eight bit per character C. the same in all modern computer D. either seven or eighth bits per character

Description : Codes must be A. agreed upon in advance between sender and receiver B. eight bit per character C. the same in all modern computer D. either seven or eighth bits per character

Last Answer : A. agreed upon in advance between sender and receiver

ECE Board Exam March 1996 Communications code is ____________. A. eight bits per character B. agreed upon in advance between sender and receiver C. the same in all modern computers D. either seven or eight bits per character

Description : ECE Board Exam March 1996 Communications code is ____________. A. eight bits per character B. agreed upon in advance between sender and receiver C. the same in all modern computers D. either seven or eight bits per character

Last Answer : B. agreed upon in advance between sender and receiver

ECE Board Exam March 1996 What is the transmission rate of a system for transmitting the output of a microcomputer to a line printer operating at a speed of 30 lines/minute? Assume that the line printer has 8 bits of data per character and prints out 80 characters/line. A. 800 bps B. 400 bps C. 320 bps D. 640 bps

Description : ECE Board Exam March 1996 What is the transmission rate of a system for transmitting the output of a microcomputer to a line printer operating at a speed of 30 lines/minute? Assume that the line printer has 8 bits ... and prints out 80 characters/line. A. 800 bps B. 400 bps C. 320 bps D. 640 bps

Last Answer : C. 320 bps

A low power, short range wireless technology designed to provide a replacement for serial cables is called ______. A. WAP B. GPRS C. Bluetooth D. EDGE

Description : A low power, short range wireless technology designed to provide a replacement for serial cables is called ______. A. WAP B. GPRS C. Bluetooth D. EDGE

Last Answer : C. Bluetooth

______ is the first component of any MATV system to received broadcast signals. A. Receiver B. Antenna C. Filter D. Transmitter

Description : ______ is the first component of any MATV system to received broadcast signals. A. Receiver B. Antenna C. Filter D. Transmitter

Last Answer : B. Antenna

What is a device that detects both vertically and horizontally polarized signals simultaneously? A. Orthomode transducer B. Crystal detector C. Optoisolator D. Isomode detector

Description : What is a device that detects both vertically and horizontally polarized signals simultaneously? A. Orthomode transducer B. Crystal detector C. Optoisolator D. Isomode detector

Last Answer : A. Orthomode transducer

The first satellite to receive and transmit simultaneously A. Intelsat I B. Agila I C. Syncorn I D. Telstar I

Description : The first satellite to receive and transmit simultaneously A. Intelsat I B. Agila I C. Syncorn I D. Telstar I

Last Answer : D. Telstar I

Known to be the first satellite capable to receive and transmit simultaneously. A. Score B. Syncom I C. Telstar 1 D. Echo1

Description : Known to be the first satellite capable to receive and transmit simultaneously. A. Score B. Syncom I C. Telstar 1 D. Echo1

Last Answer : C. Telstar 1

Three audio waves with 100,200 and 300 volts amplitude respectively, simultaneously modulate a 450 volts carrier. What is the total percent of modulation of the AM wave? A. 69 % B. 115.5 % C. 50% D. 83%

Description : Three audio waves with 100,200 and 300 volts amplitude respectively, simultaneously modulate a 450 volts carrier. What is the total percent of modulation of the AM wave? A. 69 % B. 115.5 % C. 50% D. 83%

Last Answer : D. 83%

What is the usualnumber of bits transmitted simultaneously inparalleldata transmission used by microcomputers? A. 16 B. 9 C. 8 D. 4 E. None of the above

Description : What is the usualnumber of bits transmitted simultaneously inparalleldata transmission used by microcomputers? A. 16 B. 9 C. 8 D. 4 E. None of the above

Last Answer : 9

In_______transmission, bits aretransmittedover asingle wire, one ata time. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Description : In_______transmission, bits aretransmittedover asingle wire, one ata time. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Last Answer : (a) and (b)

Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Description : Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Last Answer : B. The approximation of the quantized signal

Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Description : Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Last Answer : The approximation of the quantized signal

Quantization noise is caused by A. binary coding techniques B. serial transmission errors C. the synchronization between encoder and decoder D. the approximation of the quantized signal

Description : Quantization noise is caused by A. binary coding techniques B. serial transmission errors C. the synchronization between encoder and decoder D. the approximation of the quantized signal

Last Answer : D. the approximation of the quantized signal

A system that performs parallel-to-serial and serial-to-parallel conversion of data link. A. DCE B. DTE C. Modem D. PC

Description : A system that performs parallel-to-serial and serial-to-parallel conversion of data link. A. DCE B. DTE C. Modem D. PC

Last Answer : B. DTE

The bits are shifted and the first flip-flop receives its binary information from the____ a. Serial output b. Serial input c. Both d. None

Description : The bits are shifted and the first flip-flop receives its binary information from the____ a. Serial output b. Serial input c. Both d. None

Last Answer : b. Serial input

In_______transmission, bits aretransmittedsimultaneously,each across its own wire. A) Asynchronous serial B) Synchronous serial C) Parallel D) (a) and (b)

Description : In_______transmission, bits aretransmittedsimultaneously,each across its own wire. A) Asynchronous serial B) Synchronous serial C) Parallel D) (a) and (b)

Last Answer : Parallel

How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

Data rate at which serial PCM bits are clocked out of the PCM encoder onto the transmission line.

Description : Data rate at which serial PCM bits are clocked out of the PCM encoder onto the transmission line.

Last Answer : line speed

The start and stop bits are used in serial communication for (A) error detection (B) error correction (C) synchronization (D) slowing down the communication

Description : The start and stop bits are used in serial communication for (A) error detection (B) error correction (C) synchronization (D) slowing down the communication

Last Answer : (C) synchronization 

What is the minimum number of bits required in a PCM code for a range of 10,000? A. 12 B. 9 C. 14 D. 10

Description : What is the minimum number of bits required in a PCM code for a range of 10,000? A. 12 B. 9 C. 14 D. 10

Last Answer : C. 14

What is the typical number of bits in a static memory location? A. 1 B. 2 C. 16 D. 8

Description : What is the typical number of bits in a static memory location? A. 1 B. 2 C. 16 D. 8

Last Answer : D. 8

What is framing? A. Is concerned of synchronous system B. Refers to parallel transmission C. Is concerned with the boundaries between characters D. Is concerned with individual bits

Description : What is framing? A. Is concerned of synchronous system B. Refers to parallel transmission C. Is concerned with the boundaries between characters D. Is concerned with individual bits

Last Answer : C. Is concerned with the boundaries between characters

________ is a high-speed real-time interface for serial bus and it has data transfer up to 400 Mbps. A. Serial Port B. Fire wire C. Parallel Port D. None of the Above

Description : ________ is a high-speed real-time interface for serial bus and it has data transfer up to 400 Mbps. A. Serial Port B. Fire wire C. Parallel Port D. None of the Above

Last Answer : B. Fire wire

What is the difference between a serial port and a USB port in Arduino?

Description : What is the difference between a serial port and a USB port in Arduino?

Last Answer : A serial port in Arduino is a physical port used for serial communication, while a USB port is used to connect the Arduino board to a computer for programming and serial communication.

Can a device designed to plug into a USB port also plug into a serial or parallel port?

Description : Can a device designed to plug into a USB port also plug into a serial or parallel port?

Last Answer : Generally, not easily. You can buy adaptors, but they don’t alwas work right.

What is RS- 232C serial port ?

Description : What is RS- 232C serial port ?

Last Answer : : RS-232C serial port ( RS-232C serial port) This port connects the mouse to the computer via a thin electrical wire. This cable uses a 9 pin connector. Serial part mouse is attached to the serial part with ... to the mouse is 9 PIN FEMALE . There is another 9 PIN MALE on the back of the computer .

What is Serial Port ?

Description : What is Serial Port ?

Last Answer : Serial Port ( Serial Port) The port for connecting serial communication devices is called Serial Port. Develops port at Electronics Industry Association (EIA) . Serial devices exchange data through serial ... port has a total of 9 pins. Examples of modem and mouse serial communication devices.

__________ an external bus standard used for transferring data to and from digital devices. A. Serial Port B. Firewire C. Parallel Port D. USB

Description : __________ an external bus standard used for transferring data to and from digital devices. A. Serial Port B. Firewire C. Parallel Port D. USB

Last Answer : D. USB

__________ transmits one bit of data through a single wire. A. Serial Port B. Fire wire C. Parallel Port D. None of the Above

Description : __________ transmits one bit of data through a single wire. A. Serial Port B. Fire wire C. Parallel Port D. None of the Above

Last Answer : A. Serial Port

__________ is an interface for connecting eight or more data wires. A. Serial Port B. Fire wire C. Parallel Port D. None of the Above

Description : __________ is an interface for connecting eight or more data wires. A. Serial Port B. Fire wire C. Parallel Port D. None of the Above

Last Answer : C. Parallel Port

Printer attached on: a) Interface Port b) Serial Port c) Parallel Port d) SCSI e) None of These

Description : Printer attached on: a) Interface Port b) Serial Port c) Parallel Port d) SCSI e) None of These

Last Answer : c) Parallel Port

Define Serial Port.

Description : Define Serial Port.

Last Answer : Serial port allows s a serial hardware device to communicate with the computer by transmitting one bit of information at a time such as mouse, modems and keyboard.

Serial port vector address is of _______. And causes an interrupt when ________. a) 0013H, either TI or RI flag is set b) 0023H, either TI or RI flag is reset c) 0013H, either TI or RI flag is reset d) 0023H, either TI or RI flag is set

Description : Serial port vector address is of _______. And causes an interrupt when ________. a) 0013H, either TI or RI flag is set b) 0023H, either TI or RI flag is reset c) 0013H, either TI or RI flag is reset d) 0023H, either TI or RI flag is set

Last Answer : a) 0013H, either TI or RI flag is set

In 8096, mode ____ of serial port are ___ modes commonly used for ____ communications. a) 1, 8bit, single processor b) 0, 7bit, multiple microcontroller c) 2, 9 bit, multiple processors d) 3, 8 bit, multiple microcontroller

Description : In 8096, mode ____ of serial port are ___ modes commonly used for ____ communications. a) 1, 8bit, single processor b) 0, 7bit, multiple microcontroller c) 2, 9 bit, multiple processors d) 3, 8 bit, multiple microcontroller

Last Answer : a) 1, 8bit, single processor

In 8096, mode ____ of serial port are ___ modes commonly used for ____ communications. a) 1, 8bit, single processor b) 0, 7bit, multiple microcontroller c) 2, 9 bit, multiple processors d) 3, 8 bit, multiple microcontroller

Description : In 8096, mode ____ of serial port are ___ modes commonly used for ____ communications. a) 1, 8bit, single processor b) 0, 7bit, multiple microcontroller c) 2, 9 bit, multiple processors d) 3, 8 bit, multiple microcontroller

Last Answer : c) 2, 9 bit, multiple processors

How many synchronous and asynchronous modes are there in serial port of 8096? M. Krishna Kumar/IISc. Bangalore M5/V1/June 04/1 Microprocessors and Microcontrollers/ Multiple Choice Questions Architecture of Micro controllers a) 2, 2 respectively b) 3,1 respectively c) 1, 3 respectively d) 1, 2 respectively

Description : How many synchronous and asynchronous modes are there in serial port of 8096? M. Krishna Kumar/IISc. Bangalore M5/V1/June 04/1 Microprocessors and Microcontrollers/ Multiple Choice Questions Architecture of Micro ... 2, 2 respectively b) 3,1 respectively c) 1, 3 respectively d) 1, 2 respectively

Last Answer : c) 1, 3 respectively

What is USB ? (1) Ultimate Service Bit (2) Universal Sent-Bit (3) Universal Serial Bus (4) Urgent Sent Bit

Description : What is USB ? (1) Ultimate Service Bit (2) Universal Sent-Bit (3) Universal Serial Bus (4) Urgent Sent Bit

Last Answer : Universal Serial Bus

A loudspeaker cabinet has an internal volume of 5,184 in3 (84,950 cm3 ). It has a port area on the baffle of 50 in2 (322.58cm2 ) and a thickness of 0.70 in (18 mm). What is the Helmholtz resonance, in hertz, of this loudspeaker enclosure? A. 250 Hz B. 245 Hz C. 240 Hz D. 255 Hz

Description : A loudspeaker cabinet has an internal volume of 5,184 in3 (84,950 cm3 ). It has a port area on the baffle of 50 in2 (322.58cm2 ) and a thickness of 0.70 in (18 mm). What is the Helmholtz resonance, in hertz, of this loudspeaker enclosure? A. 250 Hz B. 245 Hz C. 240 Hz D. 255 Hz

Last Answer : C. 240 Hz

A speaker cabinet has an internal volume 84,950 cm3 . It has a port area on the baffle of 3,230 cm2 and baffle thickness of 19 mm. What is the Helmholtz resonance hertz of this speaker enclosure? A. 260 Hz B. 245 Hz C. 265 Hz D. 250 Hz

Description : A speaker cabinet has an internal volume 84,950 cm3 . It has a port area on the baffle of 3,230 cm2 and baffle thickness of 19 mm. What is the Helmholtz resonance hertz of this speaker enclosure? A. 260 Hz B. 245 Hz C. 265 Hz D. 250 Hz

Last Answer : B. 245 Hz

What is the highest frequency that can be sent straight upward and be returned to earth? A. MUF B. Gyro frequency C. Skip frequency D. Critical frequency

Description : What is the highest frequency that can be sent straight upward and be returned to earth? A. MUF B. Gyro frequency C. Skip frequency D. Critical frequency

Last Answer : D. Critical frequency