A loudspeaker cabinet has an internal volume of 5,184 in3 (84,950 cm3 ). It has a port area on the baffle of 50 in2 (322.58cm2 ) and a thickness of 0.70 in (18 mm). What is the Helmholtz resonance, in hertz, of this loudspeaker enclosure? A. 250 Hz B. 245 Hz C. 240 Hz D. 255 Hz

A loudspeaker cabinet has an internal volume of 5,184 in3
(84,950 cm3
). It has a port area
on the baffle of 50 in2
(322.58cm2
) and a thickness of 0.70 in (18 mm). What is the
Helmholtz resonance, in hertz, of this loudspeaker enclosure?
A. 250 Hz
B. 245 Hz
C. 240 Hz
D. 255 Hz
by

1 Answer

Answer :

C. 240 Hz
by

Related questions

A speaker cabinet has an internal volume 84,950 cm3 . It has a port area on the baffle of 3,230 cm2 and baffle thickness of 19 mm. What is the Helmholtz resonance hertz of this speaker enclosure? A. 260 Hz B. 245 Hz C. 265 Hz D. 250 Hz

Description : A speaker cabinet has an internal volume 84,950 cm3 . It has a port area on the baffle of 3,230 cm2 and baffle thickness of 19 mm. What is the Helmholtz resonance hertz of this speaker enclosure? A. 260 Hz B. 245 Hz C. 265 Hz D. 250 Hz

Last Answer : B. 245 Hz

A steel bar 5 m × 50 mm is loaded with 250,000 N. If the modulus of elasticity of the material is 0.2 MN/mm2 and Poisson's ratio is 0.25, the change in the volume of the bar is: (A) 1.125 cm3 (B) 2.125 cm3 (C) 3.125 cm3 (D) 4.125 cm

Description : A steel bar 5 m × 50 mm is loaded with 250,000 N. If the modulus of elasticity of the material is 0.2  MN/mm2  and Poisson's ratio is 0.25, the change in the volume of the bar is:  (A) 1.125 cm3 (B) 2.125 cm3 (C) 3.125 cm3 (D) 4.125 cm

Last Answer : (C) 3.125 cm

The reverberation time of a 184.2 cubic meters broadcast studio is 0.84 sec. Find the absorption effect of the materials used in metric sabines. A. 35.3 B. 10.96 C. 379.8 D. 109.6

Description : The reverberation time of a 184.2 cubic meters broadcast studio is 0.84 sec. Find the absorption effect of the materials used in metric sabines. A. 35.3 B. 10.96 C. 379.8 D. 109.6

Last Answer : A. 35.3

When no signal is being received, the loudspeaker is not entirely silent as a result of the presence of A. parasitic oscillations in some of the receiver stages. B. negative feedback in each stage. C. spurious frequencies as a result of improper neutralization. D. internal receiver noise.

Description : When no signal is being received, the loudspeaker is not entirely silent as a result of the presence of A. parasitic oscillations in some of the receiver stages. B. negative feedback in each stage. C. spurious frequencies as a result of improper neutralization. D. internal receiver noise.

Last Answer : D. internal receiver noise.

The international pitch A is equivalent to ___ Hz. A. 435 B. 440 C. 260 D. 255

Description : The international pitch A is equivalent to ___ Hz. A. 435 B. 440 C. 260 D. 255

Last Answer : A. 435

The American concert pitch A is equivalent to which if the following frequencies? A. 440 Hz B. 435 Hz C. 260 Hz D. 255 Hz

Description : The American concert pitch A is equivalent to which if the following frequencies? A. 440 Hz B. 435 Hz C. 260 Hz D. 255 Hz

Last Answer : A. 440 Hz

One litre of water occupies a volume of (A) 100 cm3 (B) 250 cm3 (C) 500 cm3 (D) 1000 cm3

Description : One litre of water occupies a volume of (A) 100 cm3 (B) 250 cm3 (C) 500 cm3 (D) 1000 cm3

Last Answer : Answer: Option A

There are 6 working days in a regular week and for each day, 10 hours is working hours. A woman earns Rs. 2.10 per hour. For regular work and Rs. 4.20 per hour for overtime. If he earns Rs. 525 in 4 weeks, how many hours did she work ? 1) 245 2) 225 3) 275 4) 255 5) 235

Description : There are 6 working days in a regular week and for each day, 10 hours is working hours. A woman earns Rs. 2.10 per hour. For regular work and Rs. 4.20 per hour for overtime. If he earns Rs. 525 in 4 weeks, how many hours did she work ? 1) 245 2) 225 3) 275 4) 255 5) 235

Last Answer : 1) 245

According to Taggart's rule for selecting between a gyratory crusher and a jaw crusher; the later should be used, if the hourly tonnage to be crushed divided by the square of the gape expressed in cm is less than (A) 0.00184 (B) 0.0184 (C) 0.184 (D) 1.84

Description : According to Taggart's rule for selecting between a gyratory crusher and a jaw crusher; the later should be used, if the hourly tonnage to be crushed divided by the square of the gape expressed in cm is less than (A) 0.00184 (B) 0.0184 (C) 0.184 (D) 1.84

Last Answer : (B) 0.0184

What volume of the chamber is required to measure absorption coefficient at 100 Hz? A. 125 m3 B. 50 m3 C. 150 m3 D. 352 m3

Description : What volume of the chamber is required to measure absorption coefficient at 100 Hz? A. 125 m3 B. 50 m3 C. 150 m3 D. 352 m3

Last Answer : D. 352 m3

What absorber in which efficient absorption is only possible over a very narrow band approaching 1.0 (total absorption)? A. Porous material B. Helmholtz resonator C. Panel Absorber D. Membrane absorber

Description : What absorber in which efficient absorption is only possible over a very narrow band approaching 1.0 (total absorption)? A. Porous material B. Helmholtz resonator C. Panel Absorber D. Membrane absorber

Last Answer : B. Helmholtz resonator

What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Description : What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Last Answer : C. 125,000

A final amplifier of a radio transmitter draws 250 mA of plate current when the plate supply voltage is 1400 volts. If the plate circuit efficiency is 80% and the transmitter is connected to an antenna having a feed impedance of 70 ohms, what is the antenna current at the feed-point? A. 4.0 A B. 2.2 A C. 1.25 A D. 2.0 A

Description : A final amplifier of a radio transmitter draws 250 mA of plate current when the plate supply voltage is 1400 volts. If the plate circuit efficiency is 80% and the transmitter is connected to an antenna having a feed impedance of 70 ohms, ... at the feed-point? A. 4.0 A B. 2.2 A C. 1.25 A D. 2.0 A

Last Answer : D. 2.0 A

A device that converts high frequency current into electromagnetic wave. A. Antenna B. Loudspeaker C. Microphone D. Transducer

Description : A device that converts high frequency current into electromagnetic wave. A. Antenna B. Loudspeaker C. Microphone D. Transducer

Last Answer : A. Antenna

ECE Board Exam March 1996 What is the purpose of the receiver’s squelch circuit? A. To overcome fluctuations in the level the RF signal arriving at the receiver antenna B. To prevent fluctuations in the AGC bias level C. To reduce the receiver’s sensitivity to all incoming signals D. To prevent amplified noise from reaching the loudspeaker during the absence of an incoming signal

Description : ECE Board Exam March 1996 What is the purpose of the receiver's squelch circuit? A. To overcome fluctuations in the level the RF signal arriving at the receiver antenna B. To prevent ... signals D. To prevent amplified noise from reaching the loudspeaker during the absence of an incoming signal

Last Answer : D. To prevent amplified noise from reaching the loudspeaker during the absence of an incoming signal

You are working with three networks that have the network IDs 192.168.5.0, 192.168.6.0, and192.168.7.0. What subnet mask can you use to combine these addresses intoone? A. 255.255.252.0 B. 225.255.254.0 C. 255.255.255.240 D. 255.255.255.252

Description : You are working with three networks that have the network IDs 192.168.5.0, 192.168.6.0, and192.168.7.0. What subnet mask can you use to combine these addresses intoone? A. 255.255.252.0 B. 225.255.254.0 C. 255.255.255.240 D. 255.255.255.252

Last Answer : 255.255.252.0

You are working with a network thathas the network ID 192.168.10.0. What subnet should you use that supportsup to 25 hosts and a maximum number of subnets? A. 255.255.255.192 B. 255.255.255.224 C. 255.255.255.240 D. 255.255.255.248 E. 255.255.255.252

Description : You are working with a network thathas the network ID 192.168.10.0. What subnet should you use that supportsup to 25 hosts and a maximum number of subnets? A. 255.255.255.192 B. 255.255.255.224 C. 255.255.255.240 D. 255.255.255.248 E. 255.255.255.252

Last Answer : 255.255.255.224

You havea class A network address 10.0.0.0 with 40subnets,but arerequiredto add 60 new subnets very soon. You would like to still allow for the largest possible number of host IDs per subnet. Which subnet mask should youassign? A. 255.240.0.0 B. 255.248.0.0 C. 255.252.0.0 D. 255.254.0.0 E. 255.255.255.255

Description : You havea class A network address 10.0.0.0 with 40subnets,but arerequiredto add 60 new subnets very soon. You would like to still allow for the largest possible number of host IDs per subnet. Which subnet mask should youassign? A. ... B. 255.248.0.0 C. 255.252.0.0 D. 255.254.0.0 E. 255.255.255.255

Last Answer : 255.254.0.0

If a Company require 60 hosts then What is the best possible subnet mask? a. 255.255.255.0 b. 255.255.255.192 c. 255.255.225.224 d. 225.225.255.240

Description : If a Company require 60 hosts then What is the best possible subnet mask? a. 255.255.255.0 b. 255.255.255.192 c. 255.255.225.224 d. 225.225.255.240

Last Answer : b. 255.255.255.192

A network on the Internet has a subnet mask of 255.255.240.0. What is the maximum number of hosts it can handle ? (A) 1024 (B) 2048 (C) 4096 (D) 8192

Description : A network on the Internet has a subnet mask of 255.255.240.0. What is the maximum number of hosts it can handle ? (A) 1024 (B) 2048 (C) 4096 (D) 8192

Last Answer : (C) 4096

What is the maximum line-of-sight distance between a paging antenna 250 ft high and a pager receiver 3.5ft of the ground? A. 25 km B.25mi C. 70.73 km D. 70.73 mi

Description : What is the maximum line-of-sight distance between a paging antenna 250 ft high and a pager receiver 3.5ft of the ground? A. 25 km B.25mi C. 70.73 km D. 70.73 mi

Last Answer : B.25mi

The State Election Commission conducts, controls and supervises Municipal elections under - (1) Article 240 (1) (2) Article 241 (2) (3) Article 243 (K) (4) Article 245 (4)

Description : The State Election Commission conducts, controls and supervises Municipal elections under - (1) Article 240 (1) (2) Article 241 (2) (3) Article 243 (K) (4) Article 245 (4)

Last Answer : (3) Article 243 (K) Explanation: According to Article 243 (K), the superintendence, rp direction and control of the preparation of electoral rolls for, and the conduct of, all elections ... in a State Election Commission consisting of a State Election Commissioner to be appointed by the Governor.

Number of appeared candidates increased by 20% from 2002 to 2006. If 25% of the appeared candidates qualified in 2006, what was the number of qualified candidates in 2006? A. 205 B. 225 C. 245 D. 240 E. 230

Description : Number of appeared candidates increased by 20% from 2002 to 2006. If 25% of the appeared candidates qualified in 2006, what was the number of qualified candidates in 2006? A. 205 B. 225 C. 245 D. 240 E. 230

Last Answer : B. 225

If a rectangular beam measuring 10 × 18 × 400 cm carries a uniformly distributed load such that the bending stress developed is 100 kg/cm2 . The intensity of the load per metre length, is (A) 240 kg (B) 250 kg (C) 260 kg (D) 270 kg

Description : If a rectangular beam measuring 10 × 18 × 400 cm carries a uniformly distributed load such that the bending stress developed is 100 kg/cm2 . The intensity of the load per metre length, is (A) 240 kg (B) 250 kg (C) 260 kg (D) 270 kg

Last Answer : (B) 250 kg

In reinforced concrete footing on soil, the minimum thickness at edge should not be less than (A) 100 mm (B) 150 mm (C) 200 mm (D) 250 mm

Description : In reinforced concrete footing on soil, the minimum thickness at edge should not be less than (A) 100 mm (B) 150 mm (C) 200 mm (D) 250 mm

Last Answer : Answer: Option B

Which addresses are INCORRECTLY paired with their class? * 240 - 255, Class D * 240 - 255, Class E * 224 - 239, Class D

Description : Which addresses are INCORRECTLY paired with their class? * 240 - 255, Class D * 240 - 255, Class E * 224 - 239, Class D

Last Answer : Correct answer: A & D Address classes are: 1 to 126, Class A; 128 to 191, Class B, 192 to 223, Class C; 224 to 239, Class D; and 240 to 255, Class E.

hosts per subnet. What subnet mask will you use? * 255.255.255.248 * 255.255.255.128 * 255.255.255.192 * 255.255.255.240

Description : hosts per subnet. What subnet mask will you use? * 255.255.255.248 * 255.255.255.128 * 255.255.255.192 * 255.255.255.240

Last Answer : Correct answer: A By borrowing 5 bits from the last octet, you can. have 30 subnets. If you borrowed only 4 bits you could only have 14 subnets. The formula is (2 to the power of n)-2. By borrowing ... To get 20 subnets, you would need to borrow 5 bits so the subnet mask would be 255.255.255.248

The laser frequency when the light has the wavelength 800 nm is a. 375 x 10^12 Hz b. 475 x 10^15 Hz c. 375 x 10^9 Hz d. 375 x 10^18 Hz

Description : The laser frequency when the light has the wavelength 800 nm is a. 375 x 10^12 Hz b. 475 x 10^15 Hz c. 375 x 10^9 Hz d. 375 x 10^18 Hz

Last Answer : a. 375 x 10^12 Hz

Fusion zone in the electric furnace used for reduction of phosphate rock to elemental phosphorous is maintained at __________ °C. (A) 250-300 (B) 500-750 (C) 950-1050 (D) 1400-1450

Description : Fusion zone in the electric furnace used for reduction of phosphate rock to elemental phosphorous is maintained at __________ °C. (A) 250-300 (B) 500-750 (C) 950-1050 (D) 1400-1450

Last Answer : (D) 1400-1450

In acoustics, if the volume of the room is 200 m3 then at what frequency the coefficient of absorption is measured? A. 120 kHz B. 120 Hz C. 100 Hz D. 150 Hz

Description : In acoustics, if the volume of the room is 200 m3 then at what frequency the coefficient of absorption is measured? A. 120 kHz B. 120 Hz C. 100 Hz D. 150 Hz

Last Answer : B. 120 Hz

If there is a reduction in the normally supplied frequency to a 120/240 volt, threephase AC current motor from 60 hertz to 55 hertz, the motor would _____________. A. run at a slower speed B. operate at a lower current C. overheat D. trip off the line

Description : If there is a reduction in the normally supplied frequency to a 120/240 volt, threephase AC current motor from 60 hertz to 55 hertz, the motor would _____________. A. run at a slower speed B. operate at a lower current C. overheat D. trip off the line

Last Answer : Answer: A

What's the best way to fix a mini-usb port on an external hard drive enclosure?

Description : What's the best way to fix a mini-usb port on an external hard drive enclosure?

Last Answer : I do have a spare WD hardrive enclosure that may be the same physical size, but I can’t figure out how to open it as it has no visible screws.

The agreed standard for measuring loudness is the loudness sensation produced by a 1000 Hz sine wave _____ dB above the listener’s threshold of hearing. A. 80 B. 50 C. 30 D. 40

Description : The agreed standard for measuring loudness is the loudness sensation produced by a 1000 Hz sine wave _____ dB above the listener’s threshold of hearing. A. 80 B. 50 C. 30 D. 40

Last Answer : D. 40

What is the maximum number of the elected members of Rajya Sabha? (1) 250 (2) 238 (3) 245 (4) 248

Description : What is the maximum number of the elected members of Rajya Sabha? (1) 250 (2) 238 (3) 245 (4) 248

Last Answer : (2) 238 Explanation: Membership is limited to 250 members, 12 of whom are nominated by the President of India for their contributions to art, literature, science, and social services. The remainder of ... . Terms of office are six years, with one third of the members retiring every two years.

Sun revolves around milky way in about --- million years. A. 225 B. 230 (Answer) C. 245 D. 250

Description : Sun revolves around milky way in about --- million years. A. 225 B. 230 (Answer) C. 245 D. 250

Last Answer : B. 230 (Answer)

What is the velocity factor for non-foam dielectric 50 or 75 ohm flexible coaxial cable such as RG 8, 11, 58 and 59? A. 2.70 B. 0.66 C. 0.30 D. 0.10

Description : What is the velocity factor for non-foam dielectric 50 or 75 ohm flexible coaxial cable such as RG 8, 11, 58 and 59? A. 2.70 B. 0.66 C. 0.30 D. 0.10

Last Answer : B. 0.66

What is the velocity factor for non-foam dielectric 50 or 75 ohm flexible coaxial cable such as RG 8, 11, 58 and 59? A. 2.70 B. 0.10 C. 0.66 D. 0.30

Description : What is the velocity factor for non-foam dielectric 50 or 75 ohm flexible coaxial cable such as RG 8, 11, 58 and 59? A. 2.70 B. 0.10 C. 0.66 D. 0.30

Last Answer : C. 0.66

In Dry farming, what is the annual rainfall (in mm) available? a. A Less than 550 mm b. B Less than 500 mm c. C Less than 950 mm d. D Less than 750 mm

Description : In Dry farming, what is the annual rainfall (in mm) available? a. A Less than 550 mm b. B Less than 500 mm c. C Less than 950 mm d. D Less than 750 mm

Last Answer : d. D Less than 750 mm

The change in __________ is equal to the reversible work for compression in steady state flow process under isothermal condition. (A) Internal energy (B) Enthalpy (C) Gibbs free energy (D) Helmholtz free energy

Description : The change in __________ is equal to the reversible work for compression in steady state flow process under isothermal condition. (A) Internal energy (B) Enthalpy (C) Gibbs free energy (D) Helmholtz free energy

Last Answer : (C) Gibbs free energy

What is the characteristic impedance of a single wire with a diameter d= 0.25 mm placed at the center between grounded parallel planes separated by 1 mm apart. The wire is held by a material with a velocity factor of 0.75. A. 85 Ω B. 63 Ω C. 50 Ω D. 75 Ω

Description : What is the characteristic impedance of a single wire with a diameter d= 0.25 mm placed at the center between grounded parallel planes separated by 1 mm apart. The wire is held by a material with a velocity factor of 0.75. A. 85 Ω B. 63 Ω C. 50 Ω D. 75 Ω

Last Answer : D. 75 Ω

Let `(x_0, y_0)` be the solution of the following equations In `(2x)^(In2)=(3y)^(ln3)`and `3^(lnx)=2^(lny)` Then `x_0` is

Description : Let `(x_0, y_0)` be the solution of the following equations In `(2x)^(In2)=(3y)^(ln3)`and `3^(lnx)=2^(lny)` Then `x_0` is

Last Answer : Let `(x_0, y_0)` be the solution of the following equations In `(2x)^(In2)=(3y)^(ln3)`and `3^(lnx)=2^(lny)` Then ` ... . `(1)/(3)` C. `(1)/(2)` D. `6`

What does the Hertz (Hz) designation in LCD TV specs mean?

Description : What does the Hertz (Hz) designation in LCD TV specs mean?

Last Answer : The refresh rate of the picture; as the screen is drawn , the pixels are refreshed a certain number of times per second, thus refresh rate. Rate is measured in cycles per second and ... , as some camera technologies suffer from refresh issues when acquiring the image (CMOS sensors in particular).

Humans can hear in the range of --- to ----Hertz (Hz).? A. 10 Hz to 10,000 Hz. B. 20 Hz to 20,000 Hz? C. 30 Hz to 30,000 Hz. D. 40 Hz to 40,000 Hz.

Description : Humans can hear in the range of --- to ----Hertz (Hz).? A. 10 Hz to 10,000 Hz. B. 20 Hz to 20,000 Hz? C. 30 Hz to 30,000 Hz. D. 40 Hz to 40,000 Hz.

Last Answer : B. 20 Hz to 20,000 Hz?

Pick up the correct statement from the following: (A) Frequency is the number of wave crests passing a fixed point in one second (B) Frequency of a wave is measured in Hertz (Hz) (C) Amplitude of a wave is the height of its crust from the mid-point (D) All of these

Description : Pick up the correct statement from the following: (A) Frequency is the number of wave crests passing a fixed point in one second (B) Frequency of a wave is measured in Hertz (Hz) (C) Amplitude of a wave is the height of its crust from the mid-point (D) All of these

Last Answer : Answer: Option D

Vibrating screens have capacity in the range of __________ tons/ft 2 .mm mesh size. (A) 0.2 to 0.8 (B) 5 to 25 (C) 50 to 100 (D) 100 to 250

Description : Vibrating screens have capacity in the range of __________ tons/ft 2 .mm mesh size. (A) 0.2 to 0.8 (B) 5 to 25 (C) 50 to 100 (D) 100 to 250

Last Answer : (A) 0.2 to 0.8

Flat rate parcel rates Flat Rate Parcel Boxes size Dimension of boxes (in mm) Weight (in Kg.) Tariff (in Rs.) Small - S 250*50*300 0 to 1 125 Medium - M 250*100*300 Above 1 to 2.5 200 Large - L 300*250*200 Above 2.5 to 5 400

Description : Flat rate parcel rates Flat Rate Parcel Boxes size Dimension of boxes (in mm) Weight (in Kg.) Tariff (in Rs.) Small - S 250*50*300 0 to 1 125 Medium - M 250*100*300 Above 1 to 2.5 200 Large - L 300*250*200 Above 2.5 to 5 400

Last Answer : Large - L 300*250*200 Above 2.5 to 5 400

Which antenna does not use the ground? A. Marconi B. Yagi C. Hertz D. Rhombic

Description : Which antenna does not use the ground? A. Marconi B. Yagi C. Hertz D. Rhombic

Last Answer : B. Yagi

Which antenna is not grounded at one end? A. Hertz B. Marconi C. Dipole D. Whip

Description : Which antenna is not grounded at one end? A. Hertz B. Marconi C. Dipole D. Whip

Last Answer : C. Dipole

The effect of adding parasitic elements of a Hertz dipole is to A. make the antenna more omnidirectional B. reduce its resonant frequency C. increase the antenna’s power gain D. All of these

Description : The effect of adding parasitic elements of a Hertz dipole is to A. make the antenna more omnidirectional B. reduce its resonant frequency C. increase the antenna’s power gain D. All of these

Last Answer : C. increase the antenna’s power gain