Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Which causes a quantization noise in PCM system?
A. Serial transmission errors
B. The approximation of the quantized signal
C. The synchronization between encoder and decoder
D. Binary coding techniques
by

1 Answer

Answer :

The approximation of the quantized signal
by

Related questions

Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Description : Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Last Answer : B. The approximation of the quantized signal

Quantization noise is caused by A. binary coding techniques B. serial transmission errors C. the synchronization between encoder and decoder D. the approximation of the quantized signal

Description : Quantization noise is caused by A. binary coding techniques B. serial transmission errors C. the synchronization between encoder and decoder D. the approximation of the quantized signal

Last Answer : D. the approximation of the quantized signal

The signals which are obtained by encoding each quantized signal into a digital word is called as a) PAM signal b) PCM signal c) FM signal d) Sampling and quantization

Description : The signals which are obtained by encoding each quantized signal into a digital word is called as a) PAM signal b) PCM signal c) FM signal d) Sampling and quantization

Last Answer : b) PCM signal

What is the quantization signal-to-noise ratio if an 8-bit PCM code is used? A. 40 dB B. 50 dB C. 60 dB D. 65 dB

Description : What is the quantization signal-to-noise ratio if an 8-bit PCM code is used? A. 40 dB B. 50 dB C. 60 dB D. 65 dB

Last Answer : B. 50 dB

Data rate at which serial PCM bits are clocked out of the PCM encoder onto the transmission line.

Description : Data rate at which serial PCM bits are clocked out of the PCM encoder onto the transmission line.

Last Answer : line speed

Steps to follow to produce PCM signal. A. Quantizing, sampling, and coding B. Sampling, quantizing, and coding C. Sampling, coding and quantizing D. Coding, quantizing and coding

Description : Steps to follow to produce PCM signal. A. Quantizing, sampling, and coding B. Sampling, quantizing, and coding C. Sampling, coding and quantizing D. Coding, quantizing and coding

Last Answer : B. Sampling, quantizing, and coding

In a PCM system of telemetry, the quantization noise depends on:

Description : In a PCM system of telemetry, the quantization noise depends on:  (1) The sampling rate and quantization level (2) The sampling rate only (3) The number of quantization level (4) Information provided is not sufficient

Last Answer : In a PCM system of telemetry, the quantization noise depends on: The number of quantization level.

In circular communication, the encoder becomes a decoder when there is (A) noise (B) audience (C) criticality (D) feedback

Description : In circular communication, the encoder becomes a decoder when there is (A) noise (B) audience (C) criticality (D) feedback

Last Answer : Answer: D

In a PCM system the number of quantization level are 16 and the maximum signal frequency is 4 KHz the

Description : In a PCM system the number of quantization level are 16 and the maximum signal frequency is 4 KHz the transmission bit rate is

Last Answer : In a PCM system the number of quantization level are 16 and the maximum signal frequency is 4 KHz the transmission bit rate is 32 Kbits/sec

The vehicle through which the coded message is transmitted from the source to the receiver is called a(n) A)coder. B)decoder. C)encoder. D)relay channel. E)medium of transmission.

Description : The vehicle through which the coded message is transmitted from the source to the receiver is called a(n) A)coder. B)decoder. C)encoder. D)relay channel. E)medium of transmission.

Last Answer : E)medium of transmission.

Choosing a discrete value that is near but not exactly at the analog signal level leads to a) PCM error b) Quantization error c) PAM error d) Sampling error

Description : Choosing a discrete value that is near but not exactly at the analog signal level leads to a) PCM error b) Quantization error c) PAM error d) Sampling error

Last Answer : b) Quantization error

The transformer signal coding method for T1 carrier is A. Binary B. NRZ C. Manchester D. Bipolar

Description : The transformer signal coding method for T1 carrier is A. Binary B. NRZ C. Manchester D. Bipolar

Last Answer : D. Bipolar

Sources of impulse noise induced in communication channels. A. Erroneous digital coding bit caused by an error on a transmission facility B. Transients due to relay operation C. Crosstalk from dc signaling systems D. All of these

Description : Sources of impulse noise induced in communication channels. A. Erroneous digital coding bit caused by an error on a transmission facility B. Transients due to relay operation C. Crosstalk from dc signaling systems D. All of these

Last Answer : D. All of these

Which of the following term best described the overload distortion? A. Peak limiting B. Quantization noise C. Granular noise D. Slope distortion

Description : Which of the following term best described the overload distortion? A. Peak limiting B. Quantization noise C. Granular noise D. Slope distortion

Last Answer : A. Peak limiting

_______ is more prevalent in analog signals that have steep slopes or whose amplitudes vary rapidly. A. Peak limiting B. Quantization noise C. Granular noise D. Slope overload

Description : _______ is more prevalent in analog signals that have steep slopes or whose amplitudes vary rapidly. A. Peak limiting B. Quantization noise C. Granular noise D. Slope overload

Last Answer : D. Slope overload

Which standard is utilized in intermodulation noise rates on PCM audio channels? A. CCIT Rec. G.151 B. CCIT Rec. G.172 C. CCIT Rec. G.190 D. CCIT Rec. G.190

Description : Which standard is utilized in intermodulation noise rates on PCM audio channels? A. CCIT Rec. G.151 B. CCIT Rec. G.172 C. CCIT Rec. G.190 D. CCIT Rec. G.190

Last Answer : B. CCIT Rec. G.172

Quantizing noise occurs in A. PCM B. PLM C. PDM D. PAM

Description : Quantizing noise occurs in A. PCM B. PLM C. PDM D. PAM

Last Answer : A. PCM

What is the reason why companding is employed in PCM systems? A. To overcome impulse noise in PCM receivers B. To allow amplitude limiting in the receivers C. To solve quantizing noise problem D. To protect small signals in PCM from quantizing distortion

Description : What is the reason why companding is employed in PCM systems? A. To overcome impulse noise in PCM receivers B. To allow amplitude limiting in the receivers C. To solve quantizing noise problem D. To protect small signals in PCM from quantizing distortion

Last Answer : D. To protect small signals in PCM from quantizing distortion

The transmission signal coding method of TI carrier is called a. Bipolar b. NRZ c. Manchester d. Binary

Description : The transmission signal coding method of TI carrier is called a. Bipolar b. NRZ c. Manchester d. Binary

Last Answer : Bipolar

The angle of elevation of the antenna beam is 20°. Calculate the transmission-path distance for an ionospheric transmission that utilizes a layer of virtual height 200 km. Use flat-earth approximation. A. 966 km B. 2100 km C. 1100 km D. 405 km

Description : The angle of elevation of the antenna beam is 20°. Calculate the transmission-path distance for an ionospheric transmission that utilizes a layer of virtual height 200 km. Use flat-earth approximation. A. 966 km B. 2100 km C. 1100 km D. 405 km

Last Answer : C. 1100 km

In PCM system, if we increase the quantization levels from 2 to 8, the relative bandwidth requirements will: ...

Description : In PCM system, if we increase the quantization levels from 2 to 8, the relative bandwidth requirements will:  (1) Be doubled (2) Remain same (3) Be tripled (4) Becomes eight times

Last Answer : In PCM system, if we increase the quantization levels from 2 to 8, the relative bandwidth requirements will: Be tripled.

What is the difference between decoder and encoder ?

Description : What is the difference between decoder and encoder ?

Last Answer : Differences between decoders and encoders Differences between decoders A decoder is a logic circuit that decodes a code. Used in computer memory . It takes a maximum of 2n output from n input . The difference of ... Out of the maximum 2 inputs, 1 or 0 outputs are available in n output lines .

ROM has a: a) Decoder followed by encoder b) Multiplexer followed by decoder c) Demultiplexer followed by an encoder d) None of the above

Description : ROM has a: a) Decoder followed by encoder b) Multiplexer followed by decoder c) Demultiplexer followed by an encoder d) None of the above

Last Answer : Ans: A

How is selects the register that receives the information from the output bus. Decoder Encoder MUX

Description : How is selects the register that receives the information from the output bus. Decoder Encoder MUX

Last Answer : Decoder

It is used to encode the minimum amount of speech information necessary to reproduce a perceptible message with a fewer bits that those needed by a conventional encoder/decoder

Description : It is used to encode the minimum amount of speech information necessary to reproduce a perceptible message with a fewer bits that those needed by a conventional encoder/decoder

Last Answer : vocoders

A device which converts BCD to Seven Segment is called (A) Encoder (B) Decoder (C) Multiplexer (D) Demultiplexer

Description : A device which converts BCD to Seven Segment is called (A) Encoder (B) Decoder (C) Multiplexer (D) Demultiplexer

Last Answer : Ans: B A device which converts BCD to Seven Segment is called DECODER. (A decoder coverts binary words into alphanumeric characters.)

Expressive communication is driven by (A) Passive aggression (B) Encoder’s personality characteristics (C) External clues (D) Encoder-decoder contract

Description : Expressive communication is driven by (A) Passive aggression (B) Encoder’s personality characteristics (C) External clues (D) Encoder-decoder contract

Last Answer : (B) Encoder’s personality characteristics

Communication becomes circular when (A) the decoder becomes an encoder (B) the feedback is absent (C) the source is credible (D) the channel is clear

Description : Communication becomes circular when (A) the decoder becomes an encoder (B) the feedback is absent (C) the source is credible (D) the channel is clear

Last Answer : Answer: A Circular (contextual) Discussion is conducted in a circular manner, telling stories and developing a context around the main point, which is often unstated be cause the listener will get the point after I give them all the information. There is a high reliance on context.

In successive-approximation A/D converter, offset voltage equal to 1/2 LSB is added to the D/A converter’s output. This is done to (A) Improve the speed of operation. (B) Reduce the maximum quantization error. (C) Increase the number of bits at the output. (D) Increase the range of input voltage that can be converted

Description : In successive-approximation A/D converter, offset voltage equal to 1/2 LSB is added to the D/A converter's output. This is done to (A) Improve the speed of operation. (B) Reduce the maximum ... Increase the number of bits at the output. (D) Increase the range of input voltage that can be converted

Last Answer : (B) Reduce the maximum quantization error.

What is the effect in over modulated amplitude modulated radio broadcasting transmission? A. Interference to adjacent channel B. Higher fidelity C. Increase noise D. Higher audio signal

Description : What is the effect in over modulated amplitude modulated radio broadcasting transmission? A. Interference to adjacent channel B. Higher fidelity C. Increase noise D. Higher audio signal

Last Answer : A. Interference to adjacent channel

Companding helps in reducing __________ with respect to signal: (A) Interference (B) Signal overloading (C) Non linearity (D) Quantization noise

Description : Companding helps in reducing __________ with respect to signal: (A) Interference (B) Signal overloading (C) Non linearity (D) Quantization noise

Last Answer : (D) Quantization noise

The first step in PCM is ________. A) quantization B) modulation C) sampling D) none of the above

Description : The first step in PCM is ________. A) quantization B) modulation C) sampling D) none of the above

Last Answer : sampling

In PCM encoding, quantization level varies as a function of ________ a) Frequency b) Amplitude c) Square of frequency d) Square of amplitude

Description : In PCM encoding, quantization level varies as a function of ________ a) Frequency b) Amplitude c) Square of frequency d) Square of amplitude

Last Answer : b) Amplitude

The random and unpredictable electric signal from natural causes, both internal and external to the system is know as ________. A. Distortion B. Noise C. Attenuation D. Interference

Description : The random and unpredictable electric signal from natural causes, both internal and external to the system is know as ________. A. Distortion B. Noise C. Attenuation D. Interference

Last Answer : B. Noise

What causes image interference? A. Low gain B. High IF C. Poor front-end selectivity D. Low signal-to-noise ratio

Description : What causes image interference? A. Low gain B. High IF C. Poor front-end selectivity D. Low signal-to-noise ratio

Last Answer : C. Poor front-end selectivity

Used for transmission of PCM encoded time – division multiplexed digital signal.

Description : Used for transmission of PCM encoded time – division multiplexed digital signal.

Last Answer : T carriers

A coherent binary phase shift keyed BPSK transmitter operates at a bit rate of 20 Mbps with a carrier to noise ratio C/N of 8.8dB. Find Eb/No. A. 73 dB B. 62.4 dB C. 81.8 dB D. 8.8 dB

Description : A coherent binary phase shift keyed BPSK transmitter operates at a bit rate of 20 Mbps with a carrier to noise ratio C/N of 8.8dB. Find Eb/No. A. 73 dB B. 62.4 dB C. 81.8 dB D. 8.8 dB

Last Answer : D. 8.8 dB

Which of the following is not a baseband signal modulation? A. RF carrier B. Video System C. Audio signal D. Binary coded pulses

Description : Which of the following is not a baseband signal modulation? A. RF carrier B. Video System C. Audio signal D. Binary coded pulses

Last Answer : A. RF carrier

______ provides synchronization without increasingthe number of bits. A) Scrambling B) Line coding C) Block coding D) None of the above

Description : ______ provides synchronization without increasingthe number of bits. A) Scrambling B) Line coding C) Block coding D) None of the above

Last Answer : Scrambling

_____ provides redundancy toensure synchronization and inherent errordetection. A) Block coding B) Line coding C) Scrambling D) None of the above

Description : _____ provides redundancy toensure synchronization and inherent errordetection. A) Block coding B) Line coding C) Scrambling D) None of the above

Last Answer : Block coding

Block coding can help in _______at the receiver. A) Synchronization B) Error detection C) Attenuation D) (a) and (b)

Description : Block coding can help in _______at the receiver. A) Synchronization B) Error detection C) Attenuation D) (a) and (b)

Last Answer : (a) and (b)

Define quantization error.

Description : Define quantization error.

Last Answer : In A/D converter the smallest digital step is due to the LSB and it can be made smaller only by increasing the number of bits in the digital representation. This error is called quantization error.

Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or load resistor B. noise factor expressed in decibels C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signal D. S/N of an ideal system divided by S/N at the output of the receiver or amplifier under test, both working at the same temperature over the same bandwidth and fed from the same source

Description : Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or ... under test, both working at the same temperature over the same bandwidth and fed from the same source

Last Answer : C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signals

The conversation speed of an analog to digital converter is maximum with the following technique. (A) Dual slope AD converter. (B) Serial comparator AD converter. (C) Successive approximation AD converter. (D) Parallel comparator AD converter.

Description : The conversation speed of an analog to digital converter is maximum with the following technique. (A) Dual slope AD converter. (B) Serial comparator AD converter. (C) Successive approximation AD converter. (D) Parallel comparator AD converter.

Last Answer : (D) Parallel comparator AD converter.

What is the number of levels required in a PCM system with S/N ratio of 40 dB? A. 64 B. 128 C. 256 D. 512

Description : What is the number of levels required in a PCM system with S/N ratio of 40 dB? A. 64 B. 128 C. 256 D. 512

Last Answer : B. 128

In SPADE system, how many PCM-encoded voice band channels are there? A. 800 B. 600 C. 300 D. 240

Description : In SPADE system, how many PCM-encoded voice band channels are there? A. 800 B. 600 C. 300 D. 240

Last Answer : A. 800

ECE Board Exam March 1996 According to the Nyquist theorem, the sampling rate that can be used in a PCM system is ________ the highest audio frequency. A. once B. eight times C. twice D. thrice

Description : ECE Board Exam March 1996 According to the Nyquist theorem, the sampling rate that can be used in a PCM system is ________ the highest audio frequency. A. once B. eight times C. twice D. thrice

Last Answer : C. twice

What noise is a transient short-duration disturbance distributed essentially uniformly over the useful passband of a transmission system? A. Flicker noise B. Transit-time noise C. Shot noise D. Impulse noise

Description : What noise is a transient short-duration disturbance distributed essentially uniformly over the useful passband of a transmission system? A. Flicker noise B. Transit-time noise C. Shot noise D. Impulse noise

Last Answer : D. Impulse noise

Where are the successive approximation type ADC’s used?

Description : Where are the successive approximation type ADC’s used?

Last Answer : The Successive approximation ADCs are used in applications such as data loggers & instrumentation where conversion speed is important.

Explain in brief the principle of operation of successive Approximation ADC.

Description : Explain in brief the principle of operation of successive Approximation ADC.

Last Answer : The circuit of successive approximation ADC consists of a successive approximation register (SAR), to find the required value of each bit by trial & error.With the arrival of START command, SAR sets the MSB ... /P signal. This O/P is low or High. This process continues until all bits are checked.