For navigation as well as marine and aeronautical communications and radar, ____ band is
used.
A. L
B. K
C. S
D. J

1 Answer

Answer :

A. L

Related questions

Description : A radio communications service use in radio regulation between specified fixed points provided primarily for the safety of air navigation and for the regular efficient and economical air transport ... operation service B. Space service C. Aeronautical mobile service D. Aeronautical fixed service

Last Answer : D. Aeronautical fixed service

Description : What is the current frequency band given most attenuation for satellite communications? A. Ku B. C band C. J D. P

Last Answer : A. Ku

Description : Which band of frequencies used by military for its satellites and radar? A. C band B. X band C. L band D. P band

Last Answer : B. X band

Description : Which of the following is not a common microwave application? A. Radar B. Data transmission C. Space communications D. Mobile radio

Last Answer : D. Mobile radio

Description : ____ system transmits frequency-division-multiplexed voice band signals over a coaxial cable for distances up to 4000 miles. A. T carrier B. X carrier C. L carrier D. F carrier

Last Answer : C. L carrier

Description : The time given in aeronautical communications is: a. Local mean time b. In minutes only c. UTC d. Daylight saving time

Last Answer : c. UTC

Description : The time given in aeronautical communications is: a. Local mean time b. In minutes only c. UTC d. Daylight saving time

Last Answer : c. UTC

Description : Where is the noise generated that primarily determines the signal-to-noise ratio in a VHF (150MHz) marine-band receiver? A. Man-made noise B. In the atmosphere C. In the receiver front end D. In the ionosphere

Last Answer : C. In the receiver front end

Description : Where is the noise generated that primarily determines the signal-to-noise ratio in a VHF (150 MHz) marine-band receiver? A. In the ionosphere B. In the receiver rear end C. In the receiver front end D. In the atmosphere

Last Answer : C. In the receiver front end

Description : The frequency of Ku band for satellite communications. A. 6/4 GHz B. 14/11 GHz C. 12/14 GHz D. 4/8 GHz

Last Answer : B. 14/11 GHz

Description : What is the quardband between transponder channels in the commercial C-band for satellite communications? A. 6 MHz B. 36 MHz C. 4 MHz D. 2 MHz

Last Answer : C. 4 MHz

Description : Iridium satellites can provide data communications of up ____ bps data rate. A. 1200 B. 4800 C. 2400 D. 3840

Last Answer : C. 2400

Description : Most commercial satellite activity occurs in which band(s)? A. L B. C and Ku C. X D. S and P

Last Answer : B. C and Ku

Description : Who invented Radar? (1) J. H. Van Tassel (2) Wilhelm K. Roentgen (3) P. T. Farnsworth (4) A. H. Taylor and Leo C. Young

Last Answer : A. H. Taylor and Leo C. Young

Description : What band does VSAT first operate? A. L-band B. X-band C. C-band D. Ku-band

Last Answer : C. C-band

Description : What band of frequencies do these satellites operate? A. L band B. Ka band C. C band D. Ku band

Last Answer : A. L band

Description : A band where most military satellite often operate A. Ku B. C C. X D. L

Last Answer : C. X

Description : A band whereloften operate A. Ku B. C C. X D. L

Last Answer : C. X

Description : What band does VSAT first operate? A. X-band B. C-band C. Ku-band D. L-band

Last Answer : B. C-band

Description : Which of the following sensor work based on sound navigation ranging? A : Sonar B : Radar C : Intertial D : Biosensor

Last Answer : A : Sonar

Description : Which of the following sensor work based on sound navigation ranging? A : Sonar B : Radar C : Intertial D : Biosensor

Last Answer : A : Sonar

Description : Which of the following sensor work based on sound navigation ranging? A : Sonar B : Radar C : Intertial D : Biosensor

Last Answer : A : Sonar

Description : Which of the following sensor work based on sound navigation ranging? A : Sonar B : Radar C : Intertial D : Biosensor

Last Answer : A : Sonar

Description : Which of the following sensor work based on sound navigation ranging? A : Sonar B : Radar C : Intertial D : Biosensor

Last Answer : A : Sonar

Description : What is required for navigation in IMC? a. Radio equipment and equipment for guidance until visual point b. Anti-icing equipment c. A serviceable weather radar d. One VHF box and one HF box

Last Answer : a. Radio equipment and equipment for guidance until visual point

Description : Footprint refers to coverage area in the globe A. Satellite radiation polarization B. Satellite navigation C. Satellite radiation pattern D. Satellite coverage

Last Answer : C. Satellite radiation pattern

Description : ECE Board Exam March 1996 LORAN is a navigation system used primarily for A. approach control B. obtaining fixes over large distances C. blind landing D. automatic collision warning

Last Answer : B. obtaining fixes over large distances

Description : What do you call the random noise seen on radar display screen? A. Impulse noise B. Atmospheric noise C. Grass D. Johnson noise

Last Answer : C. Grass

Description : What determines the ability of radar to determine the bearing to a target? A. Speed of light B. Speed of target C. Antenna directivity D. Frequency of signal

Last Answer : C. Antenna directivity

Description : What is the most commonly used intermediate frequency of radar receivers? A. 40 MHz B. 60 MHz C. 70 MHz D. 30 MHz

Last Answer : D. 30 MHz

Description : What instrument normally measures the virtual height of ionosphere? A. Ionosonde B. Altimeter C. Field meter D. Radar

Last Answer : A. Ionosonde

Description : Which of the following systems is not used in radio detection and ranging? A. Frequency shift B. Frequency modulation C. Pulse radar D. Amplitude modulation

Last Answer : D. Amplitude modulation

Description : RADAR means A. Radio detection and rating B. Radio detection and ranging C. Radio distance and ranging D. Radio delay and ranging

Last Answer : B. Radio detection and ranging

Description : Low-power radar uses A. RIMPATT B. TRAPATT C. Magnetron D. IMPATT

Last Answer : D. IMPATT

Description : The main benefit of light-wave communications over microwaves or any other communications media is a. Lower cost b. Better security c. Wider bandwidth d. Freedom from interference

Last Answer : c. Wider bandwidth

Description : Which of the following is used as an optical receiver in fiber optics communications a. APD b. Tunnel diode c. Laser diode d. LED

Last Answer : a. APD

Description : Which of the following is used as an optical transmitter on the Fiber Optical Communications? a. APD b. LSA diode c. PIN diode d. LED

Last Answer : d. LED

Description : Is a non-coherent light source foe optical communications system. a. ILD b. LED c. APD d. PIN Diode

Last Answer : b. LED

Description : Which does not use vertical polarization antenna? A. AM Broadcasting B. FM Broadcasting C. Mobile Communications D. Satellite Communications

Last Answer : B. FM Broadcasting

Description : Which of the following is the most common application of satellite? A. Surveillance B. Military application C. Communications D. Newscasting

Last Answer : C. Communications

Description : What is the free space attenuation of a satellite communications system operating at 36,000 km above the earth at 5.0 GHz? A. 198 dB B. 202 dB C. 142 dB D. 138 dB

Last Answer : A. 198 dB

Description : The satellite communications channels in a transponder are defined by the A. LNA B. bandpass filter C. mixer D. input signals

Last Answer : B. bandpass filter

Description : The satellite subsystem that monitors and controls the satellite is the A. propulsion subsystem B. power subsystem C. communications subsystem D. telemetry, tracking, and command subsystem

Last Answer : D. telemetry, tracking, and command subsystem

Description : The key electronic component in a communications satellite is the A. telemetry equipment B. on-board computer C. command and control system D. transponder

Last Answer : D. transponder

Description : The main function of a communications satellite is a/ an A. repeater B. reflector C. beacon D. observation platform

Last Answer : A. repeater

Description : Repeaters inside communications satellites are known as A. Trancievers B. Transponders C. Transducers D. TWT

Last Answer : B. Transponders

Description : Name one or more sources of noise bearing on electronic communications. A. Steam boiler B. Galaxies C. Internal combustion engine D. Both B and C

Last Answer : D. Both B and C

Description : A large emission of hydrogen from the sun that affects communications. A. Solar flare B. Cosmic disturbance C. Ballistic disturbance D. Solar noise

Last Answer : A. Solar flare

Description : Is the interference coming from other communications channels? A. Jitter B. Crosstalk C. RFI D. EMI

Last Answer : B. Crosstalk

Description : Noise always affects the signal in a communications systems at the ________. A. transmitter B. channel C. information source D. destination

Last Answer : B. channel