A choir consisting of 36 individuals all of whom can sing with the same intensity. A soloist sings a certain passage and then is joined by the remainder of the choir members for a repeat of the passage. What is the difference in the sound intensity level in the two cases? A. 3 dB B. 6 dB C. 36 dB D. 15.6dB

A choir consisting of 36 individuals all of whom can sing with the same intensity. A soloist
sings a certain passage and then is joined by the remainder of the choir members for a repeat of
the passage. What is the difference in the sound intensity level in the two cases?
A. 3 dB
B. 6 dB
C. 36 dB
D. 15.6dB
by

1 Answer

Answer :

D. 15.6dB
by

Related questions

For the safety and comfort of factory workers, the sound-intensity level in a certain factory must remain below 85 dB. What is the maximum sound intensity allowed in this factory? A. 3.2 x 10-4 W/m2 B. 3.2 x 10-6 W/m2 C. 3.2 x 10-10 W/m2 D. 3.2 x 10-3 W/m2

Description : For the safety and comfort of factory workers, the sound-intensity level in a certain factory must remain below 85 dB. What is the maximum sound intensity allowed in this factory? A. 3.2 x 10-4 W/m2 B. 3.2 x 10-6 W/m2 C. 3.2 x 10-10 W/m2 D. 3.2 x 10-3 W/m2

Last Answer : A. 3.2 x 10-4 W/m2

If voltage change equal to twice its original value, what is its corresponding change in dB? A. 9 dB B. 6dB C. 10 dB D. 3dB

Description : If voltage change equal to twice its original value, what is its corresponding change in dB? A. 9 dB B. 6dB C. 10 dB D. 3dB

Last Answer : B. 6dB

ECE Board Exam March 1996 A car horn outdoors produces a sound intensity level of 90 dB at 10 ft away. At this distance, what is the sound power in watt? A. 12 W B. 0.12 W C. 0.012 W D. 1.2 W

Description : ECE Board Exam March 1996 A car horn outdoors produces a sound intensity level of 90 dB at 10 ft away. At this distance, what is the sound power in watt? A. 12 W B. 0.12 W C. 0.012 W D. 1.2 W

Last Answer : C. 0.012 W

The sound intensity received from the nearby jet plane is 12.6 µW/m2 and that from another jet plane some distance away is 0.45 µW/m2 . Find the relative loudness of the two. A. 14.0 dB B. 14.5dB C. 12.5 D. 14.5

Description : The sound intensity received from the nearby jet plane is 12.6 µW/m2 and that from another jet plane some distance away is 0.45 µW/m2 . Find the relative loudness of the two. A. 14.0 dB B. 14.5dB C. 12.5 D. 14.5

Last Answer : B. 14.5dB

A special horn antenna consisting of a parabolic cylinder joined to a pyramidal horn. A. Hoghorn B. Cass-horn C. Pyramidal horn D. Conical horn

Description : A special horn antenna consisting of a parabolic cylinder joined to a pyramidal horn. A. Hoghorn B. Cass-horn C. Pyramidal horn D. Conical horn

Last Answer : A. Hoghorn

What increase in sound level is commonly perceived by most people? A. 6 to 10 dB B. 1 to 3 dB C. 3 to 6 dB D. 10 to 20dB

Description : What increase in sound level is commonly perceived by most people? A. 6 to 10 dB B. 1 to 3 dB C. 3 to 6 dB D. 10 to 20dB

Last Answer : A. 6 to 10 dB

The sound power level of a jet plane flying at a height of 1 km is 160 dB. What is the maximum sound pressure level on the ground directly below the plane assuming that the aircraft radiates sound equally in all directions? A. 59.1 dB B. 69.1 dB C. 79.1 dB D. 89.1 dB

Description : The sound power level of a jet plane flying at a height of 1 km is 160 dB. What is the maximum sound pressure level on the ground directly below the plane assuming that the aircraft radiates sound equally in all directions? A. 59.1 dB B. 69.1 dB C. 79.1 dB D. 89.1 dB

Last Answer : D. 89.1 dB

Cable attenuation is usually expressed in terms of a. Loss per foot b. dB/km c. intensity per mile d. voltage drop per inch

Description : Cable attenuation is usually expressed in terms of a. Loss per foot b. dB/km c. intensity per mile d. voltage drop per inch

Last Answer : b. dB/km

The noise from an airplane engine 100 ft from an observer is found to have an intensity of 45dB. What will be the intensity when the plane flies overhead at an altitude of 1 mi? A. 10.5 dB B. 34.5 dB C. 35 dB D. 20.5 dB

Description : The noise from an airplane engine 100 ft from an observer is found to have an intensity of 45dB. What will be the intensity when the plane flies overhead at an altitude of 1 mi? A. 10.5 dB B. 34.5 dB C. 35 dB D. 20.5 dB

Last Answer : A. 10.5 dB

What is the free space attenuation of a satellite communications system operating at 36,000 km above the earth at 5.0 GHz? A. 198 dB B. 202 dB C. 142 dB D. 138 dB

Description : What is the free space attenuation of a satellite communications system operating at 36,000 km above the earth at 5.0 GHz? A. 198 dB B. 202 dB C. 142 dB D. 138 dB

Last Answer : A. 198 dB

You are measuring noise at a +3 dB level point, using the Lenkurt 601A, F1A weighting network, and a flat meter. The meter reading is -57dBm. This is ________dBa0. A. 20 B. 15 C. 25 D. 17

Description : You are measuring noise at a +3 dB level point, using the Lenkurt 601A, F1A weighting network, and a flat meter. The meter reading is -57dBm. This is ________dBa0. A. 20 B. 15 C. 25 D. 17

Last Answer : C. 25

Have you seen the 2000 voice virtual choir sing Eric Whitacre's song "Sleep"?

Description : Have you seen the 2000 voice virtual choir sing Eric Whitacre's song "Sleep"?

Last Answer : Wow wow wow. That is truly amazing on so many levels, thanks for sharing.

The approximate intensity level of the sound which can caused damage to the ear drum is _____? A. 100 dB B. 60 dB C. 160 dB D. 20 dB

Description : The approximate intensity level of the sound which can caused damage to the ear drum is _____? A. 100 dB B. 60 dB C. 160 dB D. 20 dB

Last Answer : ANSWER: A

The approximate intensity level of the sound which can cause damage to the ear drum is? A. 20 dB B. 60 dB C. 100 dB (Answer) D. 160 dB

Description : The approximate intensity level of the sound which can cause damage to the ear drum is? A. 20 dB B. 60 dB C. 100 dB (Answer) D. 160 dB

Last Answer : C. 100 dB (Answer)

What sound intensity corresponds to a sound-intensity level of 50dB? A. 1 x 10-6W/m2 B. 1 x 10-7W/m2 C. 1 x 10-8W/m2 D.1 x 10-5W/m2

Description : What sound intensity corresponds to a sound-intensity level of 50dB? A. 1 x 10-6W/m2 B. 1 x 10-7W/m2 C. 1 x 10-8W/m2 D.1 x 10-5W/m2

Last Answer : B. 1 x 10-7W/m2

Sound intensity level is ________. A. 10 log I/I(ref) B. 10 log I(ref)/I C. 30 log I/I(ref) D. 20 log I/I(ref)

Description : Sound intensity level is ________. A. 10 log I/I(ref) B. 10 log I(ref)/I C. 30 log I/I(ref) D. 20 log I/I(ref)

Last Answer : A. 10 log I/I(ref)

Determine the gain of a 6 ft. parabolic dish operating at 1800 MHz. A. 30 dB B. 11.2 dB C. 15.5 dB D. 28.17 dB

Description : Determine the gain of a 6 ft. parabolic dish operating at 1800 MHz. A. 30 dB B. 11.2 dB C. 15.5 dB D. 28.17 dB

Last Answer : D. 28.17 dB

You are measuring noise at a -6 dB level point, using the Lenkurt 601A, F1A weighting network, and a flat meter. The meter reading is -59 dBm. This is _________ dBa0. A. 24 B. 12 C. 23 D. 32

Description : You are measuring noise at a -6 dB level point, using the Lenkurt 601A, F1A weighting network, and a flat meter. The meter reading is -59 dBm. This is _________ dBa0. A. 24 B. 12 C. 23 D. 32

Last Answer : D. 32

A dipole antenna requires to be fed with 20 kW of power to produce a given signal strength to a particular distant point. If the addition of a reflector makes the same field strength available with an input power of 11kW. What is the gain in dB, obtained by the use if the reflector. (Gain referred to this particular dipole). A. 4.75 B. 2.6 C. 1.81 D. 4.24

Description : A dipole antenna requires to be fed with 20 kW of power to produce a given signal strength to a particular distant point. If the addition of a reflector makes the same field strength available with an input power of 11kW ... Gain referred to this particular dipole). A. 4.75 B. 2.6 C. 1.81 D. 4.24

Last Answer : B. 2.6

A dipole antenna requires to be feed with 20 kW of power to produce a given signal strength to a particular distant point. If the addition of a reflector makes the same field strength available with an input power of 11 kW. What is the gain in dB obtain by the use of the reflector ? ( Gain referred to this particular dipole) A. 4.24 B. 1.81 C. 4.75 D. 2.6

Description : A dipole antenna requires to be feed with 20 kW of power to produce a given signal strength to a particular distant point. If the addition of a reflector makes the same field strength available with an input power of 11 ... ( Gain referred to this particular dipole) A. 4.24 B. 1.81 C. 4.75 D. 2.6

Last Answer : D. 2.6

What is the theoretical gain of a Hertzian dipole? A. 1.76 dB B. 2.15 dB C. 3 dB D. 0 dB

Description : What is the theoretical gain of a Hertzian dipole? A. 1.76 dB B. 2.15 dB C. 3 dB D. 0 dB

Last Answer : A. 1.76 dB

What is the gain of the Hertzian dipole over isotropic antenna? A. 1.64 dB B. 2.15 dB C. 1.76 dB D. 1.55 dB

Description : What is the gain of the Hertzian dipole over isotropic antenna? A. 1.64 dB B. 2.15 dB C. 1.76 dB D. 1.55 dB

Last Answer : C. 1.76 dB

The noise figure of the first circuit in tandem connection is 10.5 dB while its power gain is 15, what is the over all noise figure if the second circuit has a noise figure of 11 dB? A. 11.59 dB B. 11.23 dB C. 10.79 dB D. 10.5 dB

Description : The noise figure of the first circuit in tandem connection is 10.5 dB while its power gain is 15, what is the over all noise figure if the second circuit has a noise figure of 11 dB? A. 11.59 dB B. 11.23 dB C. 10.79 dB D. 10.5 dB

Last Answer : C. 10.79 dB

Theoretical gain of a hertzian dipole A. 0 dB B. 1.76 dB C. 3 dB D. 2.15 dB

Description : Theoretical gain of a hertzian dipole A. 0 dB B. 1.76 dB C. 3 dB D. 2.15 dB

Last Answer : B. 1.76 dB

ECE Board Exam November 1996 What is the applied power if a thermal RF wattmeter is connected to a transmitter through a variable attenuator? The wattmeter reads 84 mW when 15 dB of attenuation is used. A. 4.656 watts B. 2.656 watts C. 3.656 watts D. 2.856 watts

Description : ECE Board Exam November 1996 What is the applied power if a thermal RF wattmeter is connected to a transmitter through a variable attenuator? The wattmeter reads 84 mW when 15 dB of attenuation is used. A. 4.656 watts B. 2.656 watts C. 3.656 watts D. 2.856 watts

Last Answer : B. 2.656 watts

ECE Board Exam November 1996 What is the applied power if a thermal RF wattmeter is connected to a transmitter through a variable attenuator? The wattmeter reads 84 mW when 15 dB of attenuation is used. A. 4.656 watts B. 2.656 watts C. 3.656 watts D. 2.856 watts

Description : ECE Board Exam November 1996 What is the applied power if a thermal RF wattmeter is connected to a transmitter through a variable attenuator? The wattmeter reads 84 mW when 15 dB of attenuation is used. A. 4.656 watts B. 2.656 watts C. 3.656 watts D. 2.856 watts

Last Answer : A. PAM

What is the intensity of sound in normal conversation? (a) 10-20 dB (b) 30-60 dB (c) 70-90 dB (d) 120-150 dB

Description : What is the intensity of sound in normal conversation? (a) 10-20 dB (b) 30-60 dB (c) 70-90 dB (d) 120-150 dB

Last Answer : b) 30-60 dB

At what power level does a 1 KHz tone cause zero interference (144 weighted)? A. 90 dB B. 90 dBm C. -90 dBm D. -90 dBm

Description : At what power level does a 1 KHz tone cause zero interference (144 weighted)? A. 90 dB B. 90 dBm C. -90 dBm D. -90 dBm

Last Answer : D. -90 dBm

Your Western Electric 3A test set meter reading is -23 dBm at at test point level of -8 dB. This is ______ dBrnc0. A. 75 B. 29 C. 30 D. 31

Description : Your Western Electric 3A test set meter reading is -23 dBm at at test point level of -8 dB. This is ______ dBrnc0. A. 75 B. 29 C. 30 D. 31

Last Answer : A. 75

What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Description : What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Last Answer : C. 125,000

For a loudness level between 110 and 120 dB, the maximum daily exposure limit is ____ minute (s). A. 1 B. 60 C. 20 D. 45

Description : For a loudness level between 110 and 120 dB, the maximum daily exposure limit is ____ minute (s). A. 1 B. 60 C. 20 D. 45

Last Answer : A. 1

What loudness level in which permanent damage to hearing is possible? A. 120 dB B. 140 dB C. 130 dB D. 150 dB

Description : What loudness level in which permanent damage to hearing is possible? A. 120 dB B. 140 dB C. 130 dB D. 150 dB

Last Answer : D. 150 dB

At what loudness level do pitch (in mels) and frequency (in Hz) are numerically equal? A. 0 dB B. 20 dB C. 60 dB D. 40 dB

Description : At what loudness level do pitch (in mels) and frequency (in Hz) are numerically equal? A. 0 dB B. 20 dB C. 60 dB D. 40 dB

Last Answer : D. 40 dB

You are measuring noise in a voice channel at 7 dB test point level. The meter reads -56 dBm (FIA weighted). What is the reading in dBrnc? A. 20 B. 32 C. 35 D. 25

Description : You are measuring noise in a voice channel at 7 dB test point level. The meter reads -56 dBm (FIA weighted). What is the reading in dBrnc? A. 20 B. 32 C. 35 D. 25

Last Answer : C. 35

You are measuring a voice channel at a -4 dB test point level, the meter reads -73 dBm (pure test tone) convert the reading in dBmCO. A. 16 B. 18 C. 22 D. 12

Description : You are measuring a voice channel at a -4 dB test point level, the meter reads -73 dBm (pure test tone) convert the reading in dBmCO. A. 16 B. 18 C. 22 D. 12

Last Answer : C. 22

Which stands for dB relative level? A. dBrn B. dBm C. dBr D. dBa

Description : Which stands for dB relative level? A. dBrn B. dBm C. dBr D. dBa

Last Answer : C. dBr

In measuring noise in a voice channel at a 4 dB test point level, the meter reads -70 dBm (F1A weighted), convert the reading to pWp. A. 53 B. 93 C. 63 D. 83

Description : In measuring noise in a voice channel at a 4 dB test point level, the meter reads -70 dBm (F1A weighted), convert the reading to pWp. A. 53 B. 93 C. 63 D. 83

Last Answer : B. 93

ECE Board Exam March 1996 At what power level does a 1 kHz tone cause zero interference (144 weighted) ? A. -90 dB B. -90 dBm C. 90 dBm D. 90 dB

Description : ECE Board Exam March 1996 At what power level does a 1 kHz tone cause zero interference (144 weighted) ? A. -90 dB B. -90 dBm C. 90 dBm D. 90 dB

Last Answer : B. -90 dBm

(3) preventing rapid setting of cement Explanation: Portland cement clinker is a hydraulic material which shall consist of at least two-thirds by mass of calcium silicates, the remainder consisting of aluminium- and ironcontaining clinker phases and other compounds. The ratio of CaO to SiO2 shall not be less than 2.0. The magnesium oxide content (MgO) shall not exceed 5.0% by mass. Cement sets when mixed with water by way of a complex series of chemical reactions still only partly understood.

Description : (3) preventing rapid setting of cement Explanation: Portland cement clinker is a hydraulic material which shall consist of at least two-thirds by mass of calcium silicates, the remainder consisting of ... mixed with water by way of a complex series of chemical reactions still only partly understood.

Last Answer : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved

What is affected by the distance between the listener and the source of the sound because the intensity varies inversely with the square of the distance? A. Volume B. Pitch C. Loudness D. Frequency

Description : What is affected by the distance between the listener and the source of the sound because the intensity varies inversely with the square of the distance? A. Volume B. Pitch C. Loudness D. Frequency

Last Answer : C. Loudness

ECE Board Exam April 1997 Sound intensity is given as A. df/dP B. dE/dp C. dA/dP D. dP/dA

Description : ECE Board Exam April 1997 Sound intensity is given as A. df/dP B. dE/dp C. dA/dP D. dP/dA

Last Answer : D. dP/dA

The sound energy per unit area at right angles to the propagation direction per unit time. A. Sound intensity B. Loudness C. Coherence D. Sound stress

Description : The sound energy per unit area at right angles to the propagation direction per unit time. A. Sound intensity B. Loudness C. Coherence D. Sound stress

Last Answer : A. Sound intensity

____________ is the average rate of transmission of sound energy in a given direction through a cross sectional area of 1 sq.m. at right angle to the direction. A. Sound pressure B. Sound intensity C. Pressure variation D. Loudness

Description : ____________ is the average rate of transmission of sound energy in a given direction through a cross sectional area of 1 sq.m. at right angle to the direction. A. Sound pressure B. Sound intensity C. Pressure variation D. Loudness

Last Answer : B. Sound intensity

At a distance of 10 meters form a point source, the intensity level is measured to be 70 dB. At what distance form the source well the intensity be 40 dB? How do you solve this?

Description : At a distance of 10 meters form a point source, the intensity level is measured to be 70 dB. At what distance form the source well the intensity be 40 dB? How do you solve this?

Last Answer : Going on memory here….3db is half the intensity. The intensity is usually inversely proportional to r squared. The rest is math, so 70–40 is 30 or ten halves.

The total space loss of transmission and reception for two ground stations with uplink frequency 8GHz and a downlink of 6 GHz with angle of elevations of 3˚ and 7˚ A respectively is A. 403 dB B. 100 dB C. 20 dB D. 215 dB

Description : The total space loss of transmission and reception for two ground stations with uplink frequency 8GHz and a downlink of 6 GHz with angle of elevations of 3˚ and 7˚ A respectively is A. 403 dB B. 100 dB C. 20 dB D. 215 dB

Last Answer : A. 403 dB

What is the free space loss, in dB, between two microwave parabolic antennas 38.0 kilometer apart operating at 7.0 GHz? A. 145.6 dB B. 138.5 dB C. 135.5 dB D. 140.89 dB

Description : What is the free space loss, in dB, between two microwave parabolic antennas 38.0 kilometer apart operating at 7.0 GHz? A. 145.6 dB B. 138.5 dB C. 135.5 dB D. 140.89 dB

Last Answer : D. 140.89 dB

What is the gain of an antenna over a half-wavelength dipole when it has 6 dB gain over an isotropic radiator? A. 6.0 dB B. 8.1 dB C. 3.9 dB D. 10.0 dB

Description : What is the gain of an antenna over a half-wavelength dipole when it has 6 dB gain over an isotropic radiator? A. 6.0 dB B. 8.1 dB C. 3.9 dB D. 10.0 dB

Last Answer : C. 3.9 dB

Which noise figure represents the lowest noise in receiver? A. 1.6 dB B. 2.1 dB C. 2.7 dB D. 3.4 dB

Description : Which noise figure represents the lowest noise in receiver? A. 1.6 dB B. 2.1 dB C. 2.7 dB D. 3.4 dB

Last Answer : A. 1.6 dB

What is the effective radiated power of a repeater with 120 watts transmitter power output, 5 dB feedline loss, 4 dB duplexer and circulator loss, and 6 dB antenna gain? A. 601 W B. 240 W C. 60 W D. 379 W

Description : What is the effective radiated power of a repeater with 120 watts transmitter power output, 5 dB feedline loss, 4 dB duplexer and circulator loss, and 6 dB antenna gain? A. 601 W B. 240 W C. 60 W D. 379 W

Last Answer : C. 60 W