A matched termination in which the electromagnetic energy is absorbed by water.
A. Maximum power transfer
B. Load
C. Load water
D. Basin

1 Answer

Answer :

C. Load water

Related questions

Description : Transmission line must be matched to the load to A. transfer maximum voltage to the load B. transfer maximum current to the load C. reduce the load current D. transfer maximum power to the load

Last Answer : D. transfer maximum power to the load

Description : Termination means A. result of disconnecting a line from a transmitter B. result of cutting both ends of a conductor C. looking back impedance of a line with no load D. load connected to the output end of a transmission line

Last Answer : D. load connected to the output end of a transmission line

Description : A properly matched transmission line has a loss of 1.5 dB/100m. if 10 W is supplied to one end of the line, how many watts reach the load, 27 m away? A. 10 W B. 7.2 W C. 9.9 W D. 9.1 W

Last Answer : D. 9.1 W

Description : The standing wave ratio is equal to ________ if the load is properly matched with the transmission line. A. 1 B. 50 C. 10 D. 2

Last Answer : A. 1

Description : What determines the velocity factor in a transmission line? A. The termination impedance B. The line length C. Dielectrics in the line D. The center conductor resistivity

Last Answer : C. Dielectrics in the line

Description : A transmission line of unknown impedance is terminated with two different resistances, and an SWR is measured each time. With a 75 Ω termination, the SWR measures 1.5. With a 300 Ω termination, it measures 2.67. What is the impedance of the line? A. 100 Ω B. 212 Ω C. 300 Ω D. 112 Ω

Last Answer : D. 112 Ω

Description : What determines the velocity factor in transmission line? A. The center conductor resistivity B. Dielectrics in the line C. The termination impedance D. The line length

Last Answer : B. Dielectrics in the line

Description : Which one of the following is correctly matched ? a. North China : Rice b. South China : Wheat c. Candy Basin : Coffee d. Malaysia : Natural Rubber (1) a (2) b (3) c (4) d

Last Answer :  d

Description : Which of the following factor does not harm laser efficiency? a. Atmospheric absorption b. Excitation energy not absorbed c. Problems in depopulating the lower laser level d. Inefficiency in populating the upper laser level

Last Answer : a. Atmospheric absorption

Description : A dielectric waveguide for the propagation of electromagnetic energy at light frequencies a. Stripline b. Microstrip c. Laser beam d. Fiber optics

Last Answer : d. Fiber optics

Description : Any energy which radiates in the form of radio waves, infrared waves, light waves, x-rays, etc. A. Radiant energy B. Electromagnetic C. Heat D. Ultraviolet

Last Answer : B. Electromagnetic

Description : ____ is defined as any radiation of energy by means of electromagnetic wave. A. Emission B. Radiation C. Radio D. Broadcasting

Last Answer : A. Emission

Description : A device that radiates electromagnetic energy and or intercepts electromagnetic radation. A. Antenna B. Transmitter C. Transmission line D. Transceiver

Last Answer : A. Antenna

Description : The initial basin recharge is equal to (A) Interception (B) Depression storage (C) Rain absorbed by the moisture deficiency (D) All the above

Last Answer : Answer: Option D

Description : Which of the following wavelengths where absorption of electromagnetic waves becomes peak due to vibrational resonances in the water vapor molecule? A. 1.35 cm and 1.7 mm B. 1.5 mm and 5 mm C. 1.35 dm and 1.7 cm D. 1.5 cm and 5mm

Last Answer : A. 1.35 cm and 1.7 mm

Description : Which of the following wavelengths where absorption of electromagnetic waves becomes peak due to vibrational resonances in the water vapor molecule? A. 1.35 cm and 1.7 mm B. 1.5 mm and 5mm C. 1.35 dm and 1.7cm D. 1.5 cm and 5 mm

Last Answer : A. 1.35 cm and 1.7 mm

Description : In radiometric terms, it measures the rate at which electromagnetic waves transfer light energy ∙ A. Optical radiation ∙ B. Optical impedance ∙ C. Optical illusion ∙ D. Optical power

Last Answer : D. Optical power

Description : Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or ... under test, both working at the same temperature over the same bandwidth and fed from the same source

Last Answer : C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signals

Description : A device that converts high frequency current into electromagnetic wave. A. Antenna B. Loudspeaker C. Microphone D. Transducer

Last Answer : A. Antenna

Description : What are the electromagnetic radiations of wavelengths less than 300 angstroms? A. X-rays B. Ultraviolet rays C. Infrared D. Microwaves

Last Answer : A. X-rays

Description : What device in a waveguide system used for stopping or diverting electromagnetic wave as desired? A. Mechanical switch B. Electric switch C. Push-button switch D. Waveguide switch

Last Answer : D. Waveguide switch

Description : Oxygen molecule absorption peaks to electromagnetic wave are at what wavelengths? A. 1.35 cm and 1.7 mm B. 5 mm and 2.5 mm C. 5 cm and 2.5 cm D. 1.35 mm and 1.7 μm

Last Answer : B. 5 mm and 2.5 mm

Description : Oxygen molecule absorption peaks to electromagnetic wave are at what wavelengths? A. 1.35 mm and 1.7 μm B. 1.35 cm and 1.7 mm C. 5 cm and 2.5 cm D. 5 mm and 2.5 mm

Last Answer : D. 5 mm and 2.5 mm

Description : What is meant by referring to electromagnetic waves as having circular polarization? A. The electric field is bent into a circular shape. B. The electric field rotates C. The electromagnetic wave continues to circle the earth D. The electromagnetic wave has been generated by a quad antenna

Last Answer : B. The electric field rotates

Description : What is meant by referring to electromagnetic waves as horizontally polarized? A. The electric field is parallel to the earth. B. The magnetic field is parallel to the earth. C. Both the electric and magnetic fields are horizontal D. Both the electric and magnetic fields are vertical

Last Answer : A. The electric field is parallel to the earth.

Description : What is the relationship in degrees of the electrostatic and electromagnetic fields of an antenna? A. 0 degree B. 45 degrees C. 90 degrees D. 180 degrees

Last Answer : C. 90 degrees

Description : What are electromagnetic waves? A. Alternating currents in the core of an electromagnet B. A wave consisting of two electric fields at right angles to each other C. A wave consisting of an electric field ... to each other D. A wave consisting of two magnetic fields at right angles to each other

Last Answer : C. A wave consisting of an electric field and a magnetic field at right angles to each other

Description : What is caused by the transverse nature of electromagnetic waves? A. Polarization B. Interference C. Beamwidth D. Gain

Last Answer : A. Polarization

Description : The electromagnetic radiation theory was profounded by A. Sir Edward Appleton B. Guglielmo Marconi C. Heinrich Hertz D. James C. Maxwell

Last Answer : D. James C. Maxwell

Description : Electromagnetic waves of frequencies arbitrarily lower than 3,000 GHz, propagated in space without artificial guide. A. Space waves B. Terrestrial waves C. Mobile D. Hertzian waves

Last Answer : D. Hertzian waves

Description : What kind of receiver is used in conventional telephone handset? A. Capacitor B. Electromagnetic C. Carbon D. Ceramic

Last Answer : B. Electromagnetic

Description : Which of the following parts of the radio receiver represent the component that extracts the desire RF signal from the electromagnetic wave? A. AF amplifier B. Antenna C. Detector D. Crystal

Last Answer : B. Antenna

Description : What are electromagnetic waves? A. A wave consisting of two magnetic fields at right angles to each other B. A wave consisting of an electric field and a magnetic field at right angles to each ... core of an electromagnet D. A wave consisting of two electric fields at right angles to each other

Last Answer : B. A wave consisting of an electric field and a magnetic field at right angles to each other.

Description : What is meant by referring to electromagnetic waves as horizontally polarized? A. The electric field is parallel to the earth B. Both the electric and magnetic fields are vertical C. Both the electric and magnetic fields are horizontal D. The magnetic fields is parallel to the earth

Last Answer : A. The electric field is parallel to the earth

Description : An electromagnetic wave is ________ polarized when the electric field lies wholly in one plane containing the direction of propagation. A. Horizontally B. Linearly C. Circularly D. Vertically

Last Answer : B. Linearly

Description : Electromagnetic radiation theory was profounded by ______. A. Sir Edward Appleton B. Sir Isaac Newton C. James Clerk Maxwell D. Michael Faraday

Last Answer : C. James Clerk Maxwell

Description : What kind of receiver is used in converntional telephone handset? A. Capacitor B. Carbon C. Electromagnetic D. Ceramic

Last Answer : C. Electromagnetic

Description : When electromagnetic wave are propagated through a waveguide, they A. are reflected from the walls but do not travel along them B. travel along all four walls of the waveguide C. travel along the broader walls of the guide D. travel through the dielectric without touching the walls

Last Answer : A. are reflected from the walls but do not travel along them

Description : Electromagnetic wave travel at __________ in free space. A. 300,000 km/sec B. 100,000 km/ sec C. 400,000 km/sec D. 200km/sec

Last Answer : A. 300,000 km/sec

Description : An electromagnetic wave consists of A. a magnetic field only B. both electric and magnetic fields C. an electric field only D. non-magnetic field only

Last Answer : B. both electric and magnetic fields

Description : When electromagnetic waves strike the boundary of denser medium they are __________. A. Reflected, in phase B. Reflected out of phase by 180° C. reflected, they are completely absorbed

Last Answer : B. Reflected out of phase by 180°

Description : An RG-11/U foam coaxial cable has a maximum voltage standing wave of 52 V and a minimum voltage of 17 V. Find the value of the resistive load. A. 24.59Ω B. Either A or C C. 228.75Ω D. Neither A nor C

Last Answer : B. Either A or C

Description : function is used to transfer the control to end of a program which uses one argument( ) and takes value is zero for_ __ termination and non-zero for _termination: a. _ Exit( ) normal, abnormal b. Break, normal, abnormal Botha & b None of these

Last Answer : a. _ Exit( ) normal, abnormal

Description : What is considered the most efficient mode in terms of energy transfer in waveguides? A. Dominant mode B. Normal mode C. Conventional mode D. Vertical mode

Last Answer : A. Dominant mode

Description : Which one of the following statement is correct? (A) Radiant energy expressed in Joules, is the energy associated with electromagnetic radiation (B) The rate of transfer of radiant energy is called flux ... ) The radiant energy which falls upon a surface is termed as irradiance (D) All of these

Last Answer : Answer: Option D

Description : What refers to the transfer of energy due to the emission of electromagnetic waves or photons?  A. Conduction  B. Convection  C. Radiation  D. Electrification

Last Answer : Radiation

Description : ____ is the transfer of energy in the form of electromagnetic waves. a. Compulsion c. Convection b. Radiation d. Conduction

Last Answer : b. Radiation

Description : ___________ is device that measures the internal open circuit voltage of an equivalent noise generator having an impedance of 600Ω and delivering noise power to a 600 Ω load. A. Psophometer B. Barometer C. Reflectometer D. Voltmeter

Last Answer : A. Psophometer

Description : The presence of standing waves on a transmission line is the result of A. a high level of attenuation on the line. B. terminating the line by a resistive load equal in value to the surge impedance ... input power to below its critical level. D. an impedance mismatch between the load and the line.

Last Answer : D. an impedance mismatch between the load and the line.

Description : When maximum power transfer to load is a) 20 W b) 50 W c) 100W d) 0W

Last Answer : Ans: 0W