Description : What antenna radiates equally in all directions? A. Vertical antenna B. isotropic antenna C. Horizontal antenna D. Dipole antenna
Last Answer : B. isotropic antenna
Description : The sound power level of a jet plane flying at a height of 1 km is 160 dB. What is the maximum sound pressure level on the ground directly below the plane assuming that the aircraft radiates sound equally in all directions? A. 59.1 dB B. 69.1 dB C. 79.1 dB D. 89.1 dB
Last Answer : D. 89.1 dB
Description : What do you call the reflection of a part of incident light at the interface of two media that have different refractive indices? A. Snell’s reflection B. Fresnel reflection C. Lambertian reflection D. Huygen’s reflection
Last Answer : B. Fresnel reflection
Description : A radiating source that radiates energy equally in all directions is known as what type of radiator?
Last Answer : Isotropic radiator.
Description : ECE Board Exam March 1996 EIRP stands for _______________. A. effective isotropic refracted power B. effective and ideal radiated power C. effective isotropic reflected power D. effective isotropic radiated power
Last Answer : D. effective isotropic radiated power
Description : Any energy which radiates in the form of radio waves, infrared waves, light waves, x-rays, etc. A. Radiant energy B. Electromagnetic C. Heat D. Ultraviolet
Last Answer : B. Electromagnetic
Description : What type of antenna radiates in and receives energy from all directions at once?
Last Answer : Omnidirectional.
Description : A simple half-wavelength antenna radiates the strongest signal A. at 45 degrees to its axis B. parallel to its axis C. at right angles to its axis D. at 60 degrees to its axis
Last Answer : C. at right angles to its axis
Description : What is the front-to-back ratio of an antenna which radiates 500 watts in a northernly direction and 50 watts in a southernly direction? A. 25000 dB B. 10 dB C. 100 dB D. 20 dB
Last Answer : B. 10 dB
Description : The antenna radiates _____ polarized waves when the transmitter antenna is horizontally installed. A. Vertically B. negatively C. horizontally D. circularly
Last Answer : C. horizontally
Description : Which antenna radiates an omnidirectional pattern in the horizontal plane with vertical polarization? A. Marconi antenna B. Discone antenna C. Horn antenna D. Helical antenna
Last Answer : A. Marconi antenna
Description : A device that radiates electromagnetic energy and or intercepts electromagnetic radation. A. Antenna B. Transmitter C. Transmission line D. Transceiver
Last Answer : A. Antenna
Description : Is a non-coherent light source foe optical communications system. a. ILD b. LED c. APD d. PIN Diode
Last Answer : b. LED
Description : A non-coherent light source for optical communications system. A. PIN Diode B. ILD C. APD D. LED
Last Answer : D. LED
Description : In isotropic turbulence, the __________ are equal to each other. (A) Temporal velocity components (B) Mean square of velocity fluctuations in the three co-ordinate directions (C) Root mean square of velocity fluctuations in the three co-ordinate directions (D) None of these
Last Answer : (B) Mean square of velocity fluctuations in the three co-ordinate directions
Description : The materials which have the same elastic properties in all directions, are called (A) Isotropic (B) Brittle (C) Homogeneous (D) Hard
Last Answer : (A) Isotropic
Description : Isotropic materials have the same __________ in all directions. (A) Induced stresses (B) Density (C) Elastic properties (D) Thermal properties
Last Answer : C) Elastic properties
Description : While propagating through homogeneous, isotropic media, (A) Directions of both the fields are orthogonal (B) Both the fields are at right angles to the direction of propagation (C) Both (a) and (b) (D) Neither (a) nor (b)
Last Answer : Answer: Option C
Description : In a simple bending theory, one of the assumption is that the material of the beam is isotropic. This assumption means that the a. normal stress remains constant in all directions b. ... c. elastic constants are same in all the directions d. elastic constants varies linearly in the material
Last Answer : c. elastic constants are same in all the directions
Description : If a material has identical properties in all directions, it is called (a) Elastic (b) Plastic (c) Isotropic (d) Homogeneous
Last Answer : (c) Isotropic
Description : It is useful to refer to an isotropic radiator. A. when comparing the gains of directional antennas B. when testing a transmission line for standing wave ratio C. when (in the northern hemisphere) directing the transmission D. when using a dummy load to tune a transmitter
Last Answer : A. when comparing the gains of directional antennas
Description : What is the gain of an antenna over a half-wavelength dipole when it has 6 dB gain over an isotropic radiator? A. 6.0 dB B. 8.1 dB C. 3.9 dB D. 10.0 dB
Last Answer : C. 3.9 dB
Description : A theoretical reference antenna that provides a comparison for antenna measurements. A. Marconi antenna B. Isotropic radiator C. Yagi-Uda array D. Whip antenna
Last Answer : B. Isotropic radiator
Description : An isotropic radiator is A. in the northern hemisphere B. an antenna high enough in the air C. an antenna whose directive pattern is substantially incredible D. a hypothetical, omnidirectional antenna
Last Answer : D. a hypothetical, omnidirectional antenna
Description : The directivity pattern of an isotropic radiator is A. a figure-8 B. a sphere C. a unidirectional cardioid D. a parabola
Last Answer : B. a sphere
Description : Which antenna is not properly terminated? A. Resonant B. Non-resonant C. Isotropic D. Whip
Last Answer : A. Resonant
Description : Which of the following antennas is used for testing and adjusting a transmitter for proper modulation, amplifier operation and frequency accuracy? A. Elementary B. Real C. Isotropic D. Dummy
Last Answer : D. Dummy
Description : What is the gain of isotropic antenna? A. 10 B. 1 C. 10 D. 100
Last Answer : B. 1
Description : An antenna with unity gain A. Rhombic B. Half-wave dipole C. Isotropic D. Whip
Last Answer : C. Isotropic
Description : In testing transmitter to prevent interfering with other stations, which type of antenna must be used? A. Void antenna B. Dummy antenna C. Hertzian antenna D. Isotropic antenna
Last Answer : B. Dummy antenna
Description : What is the gain of the Hertzian dipole over isotropic antenna? A. 1.64 dB B. 2.15 dB C. 1.76 dB D. 1.55 dB
Last Answer : C. 1.76 dB
Description : Which of the following antennas require good grounding? A. Yagi antenna B. Hertz antenna C. Marconi antenna D. Isotropic antenna
Last Answer : C. Marconi antenna
Description : The product of antenna input power and the antenna power gain expressed in kW is called __. A. Effective Radiated Power (ERP) B. Effective Isotropic Radiated Power (EIRP) C. Radiated Power D. Transmit Power
Last Answer : A. Effective Radiated Power (ERP)
Description : The product of the radiated RF power of a transmitter and the gain of the antenna system in a given direction relative to an isotropic radiator is called ____. A. Effective Radiated Power (ERP) B. Effective Isotropic Radiated Power (EIRP) C. Radiated Power D. Transmit Power
Last Answer : B. Effective Isotropic Radiated Power (EIRP)
Description : When is it useful to refer to an isotropic radiator? A. When comparing the gains of directional antennas B. When testing a transmission line for standing wave ratio C. When (in the northern ... ) directing the transmission in a southerly direction D. When using a dummy load to tune a transmitter
Last Answer : A. When comparing the gains of directional antennas
Description : Antenna which is not properly terminated A. Isotropic B. Non-resonant C. Whip D. Resonant
Last Answer : D. Resonant
Description : An antenna that can only receive a television signal. A. Isotropic antenna B. TVRO C. Reference antenna D. Yagi antenna
Last Answer : B. TVRO
Description : Unity gain antenna A. Isotropic B. Rhombic C. Half-wave dipole D. Dummy
Last Answer : A. Isotropic
Description : Gain of an isotropic antenna A. -1 dB B. 1 dB C. 0 dB D. 2 dB
Last Answer : C. 0 dB
Description : ECE Board Exam March 1996 A type of an underground antenna is a/an __________ antenna. A. Hertz B. isotropic C. parabolic D. Marconi
Last Answer : A. Hertz
Description : ECE Board Exam March 1996 The standard reference antenna for the directive gain is ___________. A. elementary doublet B. isotropic antenna C. half-wave dipole D. infinitesimal dipole
Description : Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or ... under test, both working at the same temperature over the same bandwidth and fed from the same source
Last Answer : C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signals
Description : What noise is a transient short-duration disturbance distributed essentially uniformly over the useful passband of a transmission system? A. Flicker noise B. Transit-time noise C. Shot noise D. Impulse noise
Last Answer : D. Impulse noise
Description : Which of the following contributes to the broadening of laser emission bandwidth? a. Doppler shift of moving atoms and molecules b. Amplification within the laser medium c. Coherence of the laser light d. Optical pumping of the laser transition
Last Answer : a. Doppler shift of moving atoms and molecules
Description : What is a specific path the light takes in an optical fiber corresponding to a certain angle and number of reflection a. Mode b. Grade c. Numerical Aperture d. Dispersion
Last Answer : a. Mode
Description : Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. a. Acceptance angle b. Modes c. Sensors d. Aperture
Last Answer : b. Modes
Description : What law does a light traveling in air optical fiber follow? A. Millman B. Snell’s C. Maxwell D. Huygen
Last Answer : B. Snell’s
Description : A device that reduces the intensity of light in fiber optics communication systems. A. Reducer B. Quality factor C. Optical attenuator D. Compressor
Last Answer : C. Optical attenuator
Description : The different angles of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitter is known as ________. A. refraction B. sensor C. mode D. emitter
Last Answer : C. mode
Description : A radiating source that radiates energy stronger in one direction than another is known as what type of radiator?
Last Answer : Anisotropic radiator.