Which gases are used for gas welding?

Which gases are used for gas welding?
by

1 Answer

Answer :

Oxygen and acetylene
by

Related questions

What are the gases used for welding?

Description : What are the gases used for welding?

Last Answer : The type of gaseous requirement for welding depends on the nature of welding. For example oxy-acetylene uses oxygen and acetylene, while argon is used for TIG wielding.

The commonly used gases in tungsten arc welding are

Description : The commonly used gases in tungsten arc welding are 1.Hydrogen and oxygen 2.Hydrogen and organ 3.Hydrogen and helium 4.Helium and argon

Last Answer : The commonly used gases in tungsten arc welding are Helium and argon

What is Gas Welding ?

Description : What is Gas Welding ?

Last Answer : : Gas welding is the process of joining any two or more metal pieces using the intense heat created by combustion of any combustible gas and oxygen .

Which one among the following fuels is used in gas welding?

Description : Which one among the following fuels is used in gas welding?

Last Answer : Acetylene

Piped Natural Gas (PNG) is used for – (1) Mining (2) Welding (3) Anaesthesia (4) Cooking

Description : Piped Natural Gas (PNG) is used for – (1) Mining (2) Welding (3) Anaesthesia (4) Cooking

Last Answer : (4) Cooking Explanation: PNG is mainly methane - CH4 with a small percentage of other higher hydrocarbons. The ratio of carbon to hydrogen is least in methane and hence it burns almost ... as Residential customers, use has for cooking purpose and also for heating water through gas geysers.

Projection welding is (i) Electric arc welding (ii) Gas welding (iii)Spot welding (iv) None

Description : Projection welding is (i) Electric arc welding (ii) Gas welding (iii)Spot welding (iv) None

Last Answer : (iv) None

Which type of welding is generally used in automobile sector? a) Electric arc welding b) Electric resistance welding c) Gas welding d) Forge welding

Description : Which type of welding is generally used in automobile sector? a) Electric arc welding b) Electric resistance welding c) Gas welding d) Forge welding

Last Answer : b) Electric resistance welding

Among gas and electric arc welding, which has the higher rate of heating? a) Gas welding b) Electric arc welding c) Gas welding and electric arc welding have equal rate of heating d) Cannot be determined

Description : Among gas and electric arc welding, which has the higher rate of heating? a) Gas welding b) Electric arc welding c) Gas welding and electric arc welding have equal rate of heating d) Cannot be determined

Last Answer : b) Electric arc welding

In gas welding which of the following is generally used? a) Oxygen-Hydrogen b) Oxygen-Acetylene c) Oxygen-Hydrogen or Oxygen-Acetylene d) None of the mentioned

Description : In gas welding which of the following is generally used? a) Oxygen-Hydrogen b) Oxygen-Acetylene c) Oxygen-Hydrogen or Oxygen-Acetylene d) None of the mentioned

Last Answer : c) Oxygen-Hydrogen or Oxygen-Acetylene

Rails in the field are generally welded by using a) Thermit welding b) Gas welding c) Electric arc welding d) Forge welding

Description : Rails in the field are generally welded by using a) Thermit welding b) Gas welding c) Electric arc welding d) Forge welding

Last Answer : a) Thermit welding

Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point (C) Each ton of petroleum oil on distillation produces about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Description : Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches ... about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Last Answer : (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point

99.5% purity oxygen is used in (A) Cutting and welding by oxy-acetylene flame (B) Hospitals for medicinal purposes (C) Gas masks and artificial breathing apparatus (D) All (A), (B), and (C)

Description : 99.5% purity oxygen is used in (A) Cutting and welding by oxy-acetylene flame (B) Hospitals for medicinal purposes (C) Gas masks and artificial breathing apparatus (D) All (A), (B), and (C)

Last Answer : (D) All (A), (B), and (C)

Reaction of calcium carbide with water produces a gas, which is used (A) As an illuminant (B) For metal cutting/welding(C) Both (A) & (B)(D) Neither (A) nor (B)

Description : Reaction of calcium carbide with water produces a gas, which is used (A) As an illuminant (B) For metal cutting/welding (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Consumable electrodes are used in the __________ welding. (A) Gas (B) Arc (C) Thermit (D) Resistance

Description : Consumable electrodes are used in the __________ welding. (A) Gas (B) Arc (C) Thermit (D) Resistance

Last Answer : (B) Arc

Stainless steel is welded using (A) Oxy-acetylene flame (B) Oxy-hydrogen flame (C) Arc welding (D) Inert gas arc welding

Description : Stainless steel is welded using (A) Oxy-acetylene flame (B) Oxy-hydrogen flame (C) Arc welding (D) Inert gas arc welding

Last Answer : (D) Inert gas arc welding

oining of thin foils is preferred to be done by (A) Gamma rays (B) X-rays (C) Microwaves (D) Gas welding

Description : oining of thin foils is preferred to be done by (A) Gamma rays (B) X-rays (C) Microwaves (D) Gas welding

Last Answer : Option C

Joining of thin foils is preferred to be done by (A) Gamma rays (B) X-rays (C) Microwaves (D) Gas welding

Description : Joining of thin foils is preferred to be done by (A) Gamma rays (B) X-rays (C) Microwaves (D) Gas welding

Last Answer : Option C

What Care Has To Be Taken Care When Doing Gas Welding?

Description : What Care Has To Be Taken Care When Doing Gas Welding?

Last Answer : While doing gas welding worker should:  Should wear proper protective before doing gas welding  Valve protection caps should be in a secured place  When cutting is done, they should be secured ... away from oil or grease  Any faulty or defective equipment should be reported to the supervisor.

Which of the following uses a flat characteristic? a) MAG (GMAW) b) Oxy-fuel gas welding c) Resistance spot welding d) SAW using greater than 1000 amps

Description : Which of the following uses a flat characteristic? a) MAG (GMAW) b) Oxy-fuel gas welding c) Resistance spot welding d) SAW using greater than 1000 amps

Last Answer : a) MAG (GMAW)

What course of action should be taken upon finding a welder using incorrect shielding gas? a) Allow welding to proceed if the workmanship is good b) Report the incident and record all relevant information c) None if the tensile strength of the consumables is the same as the approved one d) Change the electrode for the correct type and continue welding

Description : What course of action should be taken upon finding a welder using incorrect shielding gas? a) Allow welding to proceed if the workmanship is good b) Report the incident and record all relevant ... the same as the approved one d) Change the electrode for the correct type and continue welding

Last Answer : b) Report the incident and record all relevant information

Acetylene is commonly used in a gas welding torch. Give the molecular formula for acetylene.

Description : Acetylene is commonly used in a gas welding torch. Give the molecular formula for acetylene. 

Last Answer : ANSWER: C2H2 or HC2H or H2C2

Sketch and label different types of gas welding flames. Also give application of any one flame.

Description : Sketch and label different types of gas welding flames. Also give application of any one flame.

Last Answer : 1) Neutral Flame: - A neutral flame is obtained when equal amounts of oxygen and acetylene are mixed and burnt in a torch.   Applications: - stainless steel, cast iron, copper ,mild ... when acetylene is supplied more than oxygen.   Applications:-high carbon steel, nonferrous alloy 

State the working principle of gas welding.

Description : State the working principle of gas welding.

Last Answer : Working principle of gas welding: Gas Welding is a fusion welding process. It joins metals, using the heat of combustion of the oxygen/air and combustible gas (i.e. acetylene, hydrogen, propane, ... the components to be forced together under pressure until the weld is forms and solidifies. 

List various types of flames used in gas welding.

Description : List various types of flames used in gas welding. 

Last Answer : Answer: 1. Neutral Flame 2. Oxidizing Flame 3. Carburizing Flame 

Piped Natural Gas (PNG) is used for (1) Mining (2) Welding (3) Anaesthesia (4) Cooking

Description : Piped Natural Gas (PNG) is used for (1) Mining (2) Welding (3) Anaesthesia (4) Cooking

Last Answer : Cooking