Reaction of calcium carbide with water produces a gas, which is used (A) As an illuminant (B) For metal cutting/welding(C) Both (A) & (B)(D) Neither (A) nor (B)

Reaction of calcium carbide with water produces a gas, which is used
(A) As an illuminant
(B) For metal cutting/welding
(C) Both (A) & (B)
(D) Neither (A) nor (B)
by

1 Answer

Answer :

(C) Both (A) & (B)
by

Related questions

With increase in carbide/graphite ratio in cast iron, its (A) Hardness & brittleness increases (B) Ductility decreases (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : With increase in carbide/graphite ratio in cast iron, its (A) Hardness & brittleness increases (B) Ductility decreases (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point (C) Each ton of petroleum oil on distillation produces about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Description : Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches ... about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Last Answer : (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point

Cermets are used for making (A) Cutting tools (B) Abrasives (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Cermets are used for making (A) Cutting tools (B) Abrasives (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Inversion of sucrose produces (A) Fructose (B) Glucose (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Inversion of sucrose produces (A) Fructose (B) Glucose (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Glucose

Carbide tipped cutting tools are manufactured by powder metallurgy techniques and have a composition of (A) 90% tungsten carbide and 10% cobalt (B) 70% aluminium oxide & 30% silica (C) 30% nickel, 15% chromium & 55% tungsten (D) 65% tungsten & 35% zirconium

Description : Carbide tipped cutting tools are manufactured by powder metallurgy techniques and have a composition of (A) 90% tungsten carbide and 10% cobalt (B) 70% aluminium oxide & 30% silica (C) 30% nickel, 15% chromium & 55% tungsten (D) 65% tungsten & 35% zirconium

Last Answer : Option A

Galvanising (i.e., zinc coating) of steel sheets is done to (A) Prevent its rusting by contact with corrosive atmosphere (B) Protect the base metal by cathodic protection (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Galvanising (i.e., zinc coating) of steel sheets is done to (A) Prevent its rusting by contact with corrosive atmosphere (B) Protect the base metal by cathodic protection (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Diffusion co-efficient of a metal in a solid solution depends upon its (A) Composition (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Diffusion co-efficient of a metal in a solid solution depends upon its (A) Composition (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Brazing is the joining of metals (A) Without melting the base metal (B) With a non-ferrous filler (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Brazing is the joining of metals (A) Without melting the base metal (B) With a non-ferrous filler (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : Option C

For the irreversible reaction, Ca+ 2C = Ca C2, Δ H°298 = - 60000 J . mole-1. If a system initially containing 2 moles of calcium, 3 moles of carbon and 1 mole of calcium carbide is allowed to react to completion, the heat evolved at 298 K will be (A) 30,000 J (B) 60,000 J (C) 90,000 J (D) 2,40,000 J

Description : For the irreversible reaction, Ca+ 2C = Ca C2, Δ H°298 = - 60000 J . mole-1. If a system initially containing 2 moles of calcium, 3 moles of carbon and 1 mole of calcium carbide is allowed to react to completion, the heat evolved ... will be (A) 30,000 J (B) 60,000 J (C) 90,000 J (D) 2,40,000 J

Last Answer : (C) 90,000 J

Prime coking coal is always blended with medium or non- coking coal before carbonisation (A) To check against its excessive swelling during heating, which may exert high pressure and damage coke oven walls (B) Because, it alone produces unreactive coke (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Prime coking coal is always blended with medium or non- coking coal before carbonisation (A) To check against its excessive swelling during heating, which may exert high pressure and damage coke oven walls (B) Because, it alone produces unreactive coke (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

With increase in temperature, the equilibrium __________ rises in case of endothermic reaction. (A) Constant (B) Conversion (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : With increase in temperature, the equilibrium __________ rises in case of endothermic reaction. (A) Constant (B) Conversion (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Conversion

Chemical kinetics can predict the __________ of a chemical reaction. (A) Rate (B) Feasibility (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Chemical kinetics can predict the __________ of a chemical reaction. (A) Rate (B) Feasibility (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Rate

In a CSTR __________ varies with time. (A) Reaction rate (B) Concentration (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In a CSTR __________ varies with time. (A) Reaction rate (B) Concentration (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

What is the gaseous product formed from the reaction of calcium carbide and water?

Description : What is the gaseous product formed from the reaction of calcium carbide and water?

Last Answer : ANSWER: ACETYLENE (or ETHYNE OR C2H2)

In the absorption of ammonia in water, the main resistance to absorption is by the __________ phase. (A) Liquid (B) Gas (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In the absorption of ammonia in water, the main resistance to absorption is by the __________ phase. (A) Liquid (B) Gas (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Gas

`underset("Calcium carbide")(CaC_(2))overset(H_(2)O)(to)(A)overset("Red hot Cu tube")(to)(B)`, Product (B) of the reaction is:

Description : `underset("Calcium carbide")(CaC_(2))overset(H_(2)O)(to)(A)overset("Red hot Cu tube")(to)(B)`, Product (B) of the reaction is:

Last Answer : `underset("Calcium carbide")(CaC_(2))overset(H_(2)O)(to)(A)overset("Red hot Cu tube")(to)(B)`, Product (B) of the reaction is: A. B. C. D.

In the desorption of highly soluble gas from the liquid, the main resistance will be in the __________ phase. (A) Gas (B) Liquid (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In the desorption of highly soluble gas from the liquid, the main resistance will be in the __________ phase. (A) Gas (B) Liquid (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Liquid

In a packed tower, the value of HETP equals HTUOG, when the equilibrium and the operating lines are (where, HETP = height equivalent to a theoretical plate HTUOG = overall gas phase height of a transfer unit). (A) Straight (B) Parallel (C) Both (A) & (B) (D) Neither (A) nor (B

Description : In a packed tower, the value of HETP equals HTUOG, when the equilibrium and the operating lines are (where, HETP = height equivalent to a theoretical plate HTUOG = overall gas phase height of a transfer unit). (A) Straight (B) Parallel (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Natural draft created by the chimney depends upon (A) Temperature of the flue gas (B) Its height (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Natural draft created by the chimney depends upon (A) Temperature of the flue gas (B) Its height (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Aerodynamic noise resulting from turbulent gas flow is the most prevalent source of valve noise in fluid flow control. It is caused due to (A) Reynold stresses (B) Shear forces (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Aerodynamic noise resulting from turbulent gas flow is the most prevalent source of valve noise in fluid flow control. It is caused due to (A) Reynold stresses (B) Shear forces (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

High purity nitrogen is used in (A) Making protective gas (95% N2 + 5% H2 ) for annealing of cold rolled steel strip coils (B) Fire fighting purposes (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : High purity nitrogen is used in (A) Making protective gas (95% N2 + 5% H2 ) for annealing of cold rolled steel strip coils (B) Fire fighting purposes (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The standard state of a gas (at a given temperature) is the state in which fugacity is equal to (A) Unity (B) Activity (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The standard state of a gas (at a given temperature) is the state in which fugacity is equal to (A) Unity (B) Activity (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Entropy of an ideal gas depends upon its (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Entropy of an ideal gas depends upon its (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The heat capacities for the ideal gas state depend upon the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The heat capacities for the ideal gas state depend upon the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Temperature

he gas law (PV = RT) is true for an __________ change. (A) Isothermal (B) Adiabatic (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : he gas law (PV = RT) is true for an __________ change. (A) Isothermal (B) Adiabatic (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Highest cutting speed is achieved by the __________ tool material. (A) High speed steel (B) Carbide (C) Cast alloy (D) Plain carbon steel

Description : Highest cutting speed is achieved by the __________ tool material. (A) High speed steel (B) Carbide (C) Cast alloy (D) Plain carbon steel

Last Answer : (B) Carbide

Stellite is a __________ material. (A) Ferrous (B) Ceramic (C) Cemented carbide (D) Non-ferrous cast alloy cutting tool

Description : Stellite is a __________ material. (A) Ferrous (B) Ceramic (C) Cemented carbide (D) Non-ferrous cast alloy cutting tool

Last Answer : (D) Non-ferrous cast alloy cutting tool

Cemented carbide tools are not suitable for cutting (A) Aluminium (B) Brass (C) Cast iron (D) Steel

Description : Cemented carbide tools are not suitable for cutting (A) Aluminium (B) Brass (C) Cast iron (D) Steel

Last Answer : (A) Aluminium

Which of the following is the most wear resistant grade of carbide used for the cutting tools? (A) Aluminium carbide (B) Tungsten carbide (C) Nickel carbide (D) Iron carbid

Description : Which of the following is the most wear resistant grade of carbide used for the cutting tools? (A) Aluminium carbide (B) Tungsten carbide (C) Nickel carbide (D) Iron carbid

Last Answer : Option B

Which of the following is the most wear resistant grade of carbide used for the cutting tools? (A) Aluminium carbide (B) Tungsten carbide (C) Nickel carbide (D) Iron carbide

Description : Which of the following is the most wear resistant grade of carbide used for the cutting tools? (A) Aluminium carbide (B) Tungsten carbide (C) Nickel carbide (D) Iron carbide

Last Answer : Option B

Leaching of phosphate rock by strong __________ acid produces phosphoric acid. (A) Sulphuric (B) Hydrochloric (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : Leaching of phosphate rock by strong __________ acid produces phosphoric acid. (A) Sulphuric (B) Hydrochloric (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B)

Consider the following statements: 1. A flute of smaller length produces waves of lower frequency. 2. Sound travels in rocks in the form of longitudinal elastic waves only. Which of the statements given above is/are correct? (a) 1 only (b) 2 only (c) Both 1 and 2 (d) Neither 1 nor 2

Description : Consider the following statements: 1. A flute of smaller length produces waves of lower frequency. 2. Sound travels in rocks in the form of longitudinal elastic waves only. Which of the statements given above is/are correct? (a) 1 only (b) 2 only (c) Both 1 and 2 (d) Neither 1 nor 2

Last Answer : Ans:(d)

Phenylephrine instilled in the eye produces: A. Mydriasis but no cycloplegia B. Cycloplegia but no mydriasis C. Both mydriasis and cycloplegia D. Neither mydriasis nor cycloplegia

Description : Phenylephrine instilled in the eye produces: A. Mydriasis but no cycloplegia B. Cycloplegia but no mydriasis C. Both mydriasis and cycloplegia D. Neither mydriasis nor cycloplegia

Last Answer : A. Mydriasis but no cycloplegia

Phenylephrine instilled in the eye produces: A. Mydriasis but no cycloplegia B. Cycloplegia but no mydriasis C. Both mydriasis and cycloplegia D. Neither mydriasis nor cycloplegia

Description : Phenylephrine instilled in the eye produces: A. Mydriasis but no cycloplegia B. Cycloplegia but no mydriasis C. Both mydriasis and cycloplegia D. Neither mydriasis nor cycloplegia

Last Answer : A. Mydriasis but no cycloplegia

Phenylephrine instilled in the eye produces: A. Mydriasis but no cycloplegia B. Cycloplegia but no mydriasis C. Both mydriasis and cycloplegia D. Neither mydriasis nor cycloplegia

Description : Phenylephrine instilled in the eye produces: A. Mydriasis but no cycloplegia B. Cycloplegia but no mydriasis C. Both mydriasis and cycloplegia D. Neither mydriasis nor cycloplegia

Last Answer : A. Mydriasis but no cycloplegia

Pick up the correct statement from the following: (A) The earth work of cutting in trenches or borrow pits in fairly uniform ground is measured with the help of average depths of the dead men (B) The earth work in trenches or borrow pits in irregular ground is measured by taking the difference in levels before and after completion of work (C) The earth work in trenches or borrow pits, where neither a nor b is feasible, are measured from the fillings after deduction of voids (D) All the above

Description : Pick up the correct statement from the following: (A) The earth work of cutting in trenches or borrow pits in fairly uniform ground is measured with the help of average depths of the dead men (B) ... a nor b is feasible, are measured from the fillings after deduction of voids (D) All the above

Last Answer : (D) All the above

Which gas is produced after the application of Calcium Carbide to the fruits, for rapid ripening? a. Methane b. Carbon-di-oxide c. Acetylene d. Ethylene

Description : Which gas is produced after the application of Calcium Carbide to the fruits, for rapid ripening? a. Methane b. Carbon-di-oxide c. Acetylene d. Ethylene

Last Answer : c. Acetylene

Which gas is produced after the application of Calcium Carbide to the fruits, for rapid ripening? a. Methane b. Carbon-di-oxide c. Acetylene d. Ethylene

Description : Which gas is produced after the application of Calcium Carbide to the fruits, for rapid ripening? a. Methane b. Carbon-di-oxide c. Acetylene d. Ethylene

Last Answer : c. Acetylene

Oxygen cylinders used for autogenous (cutting/welding) purposes are (A) Seamless & made of steel (B) Heat treated before use (C) Made by sand casting (D) Welded steel cylinders

Description : Oxygen cylinders used for autogenous (cutting/welding) purposes are (A) Seamless & made of steel (B) Heat treated before use (C) Made by sand casting (D) Welded steel cylinders

Last Answer : Option A

Threshold energy in a reaction is equal to the (A) Activation energy (B) Normal energy of reactants (C) Sum of (A) & (B) (D) Neither (A) nor (B)

Description : Threshold energy in a reaction is equal to the (A) Activation energy (B) Normal energy of reactants (C) Sum of (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Sum of (A) & (B)

99.5% purity oxygen is used in (A) Cutting and welding by oxy-acetylene flame (B) Hospitals for medicinal purposes (C) Gas masks and artificial breathing apparatus (D) All (A), (B), and (C)

Description : 99.5% purity oxygen is used in (A) Cutting and welding by oxy-acetylene flame (B) Hospitals for medicinal purposes (C) Gas masks and artificial breathing apparatus (D) All (A), (B), and (C)

Last Answer : (D) All (A), (B), and (C)

In regard to carbide burs; the more number of cutting blades and low speed will result in: A. Less efficient cutting and a smoother surface B. Less efficient cutting and a rougher surface C. More efficient cutting and a smoother surface D. More efficient cutting and a rougher surface

Description : In regard to carbide burs; the more number of cutting blades and low speed will result in: A. Less efficient cutting and a smoother surface B. Less efficient cutting and a rougher surface C. More efficient cutting and a smoother surface D. More efficient cutting and a rougher surface

Last Answer : A. Less efficient cutting and a smoother surface

elect the drug which relieves anxiety but neither reacts with benzodiazepine receptor nor produces any overt CNS effect: A. Oxazepam B. Thioproperazine C. Buspirone D. Chlordiazepoxide

Description : elect the drug which relieves anxiety but neither reacts with benzodiazepine receptor nor produces any overt CNS effect: A. Oxazepam B. Thioproperazine C. Buspirone D. Chlordiazepoxide

Last Answer : C. Buspirone

Ceramic recuperators are generally made of (A) Silicon carbide (B) Calcium carbide (C) Fireclay bricks (D) High alumina bricks

Description : Ceramic recuperators are generally made of (A) Silicon carbide (B) Calcium carbide (C) Fireclay bricks (D) High alumina bricks

Last Answer : (A) Silicon carbide

Carbon supply in pack carburising process is in the form of (A) Charcoal (B) Calcium carbide (C) Hydrocarbon oil (D) Graphite

Description : Carbon supply in pack carburising process is in the form of (A) Charcoal (B) Calcium carbide (C) Hydrocarbon oil (D) Graphite

Last Answer : (A) Charcoal

The main constituent of carborundum is __________ carbide. (A) Calcium (B) Silicon (C) Boron (D) Aluminium

Description : The main constituent of carborundum is __________ carbide. (A) Calcium (B) Silicon (C) Boron (D) Aluminium

Last Answer : (B) Silicon

In primitive days, __________ was being manufactured by LeblancProcess.(A) Alum(B) Washing soda(C) Soda ash(D) Calcium carbide

Description : In primitive days, __________ was being manufactured by Leblanc Process. (A) Alum (B) Washing soda (C) Soda ash (D) Calcium carbide

Last Answer : (C) Soda ash

The temperature in the calcium carbide furnace is __________ °C. (A) 200-300 (B) 700-850 (C) 2000-2200 (D) 4000-4500

Description : The temperature in the calcium carbide furnace is __________ °C. (A) 200-300 (B) 700-850 (C) 2000-2200 (D) 4000-4500

Last Answer : (C) 2000-2200

Coke used for the production of calcium carbide should have (A) Low ash content (B) Low ignition temperature (C) High electrical resistivity (D) All (A), (B) and (C)

Description : Coke used for the production of calcium carbide should have (A) Low ash content (B) Low ignition temperature (C) High electrical resistivity (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Commercial production of calcium carbide requires limestone and __________ as raw materials. (A) Coke (B) Sand (C) Soda ash (D) Fuel oil

Description : Commercial production of calcium carbide requires limestone and __________ as raw materials. (A) Coke (B) Sand (C) Soda ash (D) Fuel oil

Last Answer : (B) Sand