What Care Has To Be Taken Care When Doing Gas Welding?

What Care Has To Be Taken Care When Doing Gas Welding?
by

1 Answer

Answer :

While doing gas welding worker should:
 Should wear proper protective before doing gas welding
 Valve protection caps should be in a secured place
 When cutting is done, they should be secured on a pallet or springboard
 Cylinder should be transported in a vertical situation
 For lifting cylinders, valve protection caps shall not be used for lifting from one
vertical position to another
 Oxygen and fittings shall be kept away from oil or grease
 Any faulty or defective equipment should be reported to the supervisor.
by

Related questions

While Doing Welding What Are The Safety Measures That Worker Should Follow?

Description : While Doing Welding What Are The Safety Measures That Worker Should Follow?

Last Answer : While doing welding, workers should follow the rules like: Respirator or welders mask: Use mask or respirators as per your projects, match the filter to the types of metals and coatings used ... be a cover with protective and clothes which can bear heat and spark emitted from the welding.

What course of action should be taken upon finding a welder using incorrect shielding gas? a) Allow welding to proceed if the workmanship is good b) Report the incident and record all relevant information c) None if the tensile strength of the consumables is the same as the approved one d) Change the electrode for the correct type and continue welding

Description : What course of action should be taken upon finding a welder using incorrect shielding gas? a) Allow welding to proceed if the workmanship is good b) Report the incident and record all relevant ... the same as the approved one d) Change the electrode for the correct type and continue welding

Last Answer : b) Report the incident and record all relevant information

CNC machining centres do not include operations like a.milling b.boring c.welding d.tapping

Description : CNC machining centres do not include operations like a.milling b.boring c.welding d.tapping

Last Answer : c.welding

Addition of heat at constant pressure to a gas results in  (a) raising its temperature  (b) raising its pressure  (c) raising its volume  (d) raising its temperature and doing external work  (e) doing external work.

Description : Addition of heat at constant pressure to a gas results in  (a) raising its temperature  (b) raising its pressure  (c) raising its volume  (d) raising its temperature and doing external work  (e) doing external work.

Last Answer : Answer : d

What is Gas Welding ?

Description : What is Gas Welding ?

Last Answer : : Gas welding is the process of joining any two or more metal pieces using the intense heat created by combustion of any combustible gas and oxygen .

Which one among the following fuels is used in gas welding?

Description : Which one among the following fuels is used in gas welding?

Last Answer : Acetylene

Piped Natural Gas (PNG) is used for – (1) Mining (2) Welding (3) Anaesthesia (4) Cooking

Description : Piped Natural Gas (PNG) is used for – (1) Mining (2) Welding (3) Anaesthesia (4) Cooking

Last Answer : (4) Cooking Explanation: PNG is mainly methane - CH4 with a small percentage of other higher hydrocarbons. The ratio of carbon to hydrogen is least in methane and hence it burns almost ... as Residential customers, use has for cooking purpose and also for heating water through gas geysers.

Which gases are used for gas welding?

Description : Which gases are used for gas welding?

Last Answer : Oxygen and acetylene

Projection welding is (i) Electric arc welding (ii) Gas welding (iii)Spot welding (iv) None

Description : Projection welding is (i) Electric arc welding (ii) Gas welding (iii)Spot welding (iv) None

Last Answer : (iv) None

Which type of welding is generally used in automobile sector? a) Electric arc welding b) Electric resistance welding c) Gas welding d) Forge welding

Description : Which type of welding is generally used in automobile sector? a) Electric arc welding b) Electric resistance welding c) Gas welding d) Forge welding

Last Answer : b) Electric resistance welding

Among gas and electric arc welding, which has the higher rate of heating? a) Gas welding b) Electric arc welding c) Gas welding and electric arc welding have equal rate of heating d) Cannot be determined

Description : Among gas and electric arc welding, which has the higher rate of heating? a) Gas welding b) Electric arc welding c) Gas welding and electric arc welding have equal rate of heating d) Cannot be determined

Last Answer : b) Electric arc welding

In gas welding which of the following is generally used? a) Oxygen-Hydrogen b) Oxygen-Acetylene c) Oxygen-Hydrogen or Oxygen-Acetylene d) None of the mentioned

Description : In gas welding which of the following is generally used? a) Oxygen-Hydrogen b) Oxygen-Acetylene c) Oxygen-Hydrogen or Oxygen-Acetylene d) None of the mentioned

Last Answer : c) Oxygen-Hydrogen or Oxygen-Acetylene

Rails in the field are generally welded by using a) Thermit welding b) Gas welding c) Electric arc welding d) Forge welding

Description : Rails in the field are generally welded by using a) Thermit welding b) Gas welding c) Electric arc welding d) Forge welding

Last Answer : a) Thermit welding

Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point (C) Each ton of petroleum oil on distillation produces about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Description : Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches ... about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Last Answer : (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point

99.5% purity oxygen is used in (A) Cutting and welding by oxy-acetylene flame (B) Hospitals for medicinal purposes (C) Gas masks and artificial breathing apparatus (D) All (A), (B), and (C)

Description : 99.5% purity oxygen is used in (A) Cutting and welding by oxy-acetylene flame (B) Hospitals for medicinal purposes (C) Gas masks and artificial breathing apparatus (D) All (A), (B), and (C)

Last Answer : (D) All (A), (B), and (C)

Reaction of calcium carbide with water produces a gas, which is used (A) As an illuminant (B) For metal cutting/welding(C) Both (A) & (B)(D) Neither (A) nor (B)

Description : Reaction of calcium carbide with water produces a gas, which is used (A) As an illuminant (B) For metal cutting/welding (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Consumable electrodes are used in the __________ welding. (A) Gas (B) Arc (C) Thermit (D) Resistance

Description : Consumable electrodes are used in the __________ welding. (A) Gas (B) Arc (C) Thermit (D) Resistance

Last Answer : (B) Arc

Stainless steel is welded using (A) Oxy-acetylene flame (B) Oxy-hydrogen flame (C) Arc welding (D) Inert gas arc welding

Description : Stainless steel is welded using (A) Oxy-acetylene flame (B) Oxy-hydrogen flame (C) Arc welding (D) Inert gas arc welding

Last Answer : (D) Inert gas arc welding

oining of thin foils is preferred to be done by (A) Gamma rays (B) X-rays (C) Microwaves (D) Gas welding

Description : oining of thin foils is preferred to be done by (A) Gamma rays (B) X-rays (C) Microwaves (D) Gas welding

Last Answer : Option C

Joining of thin foils is preferred to be done by (A) Gamma rays (B) X-rays (C) Microwaves (D) Gas welding

Description : Joining of thin foils is preferred to be done by (A) Gamma rays (B) X-rays (C) Microwaves (D) Gas welding

Last Answer : Option C

Which of the following uses a flat characteristic? a) MAG (GMAW) b) Oxy-fuel gas welding c) Resistance spot welding d) SAW using greater than 1000 amps

Description : Which of the following uses a flat characteristic? a) MAG (GMAW) b) Oxy-fuel gas welding c) Resistance spot welding d) SAW using greater than 1000 amps

Last Answer : a) MAG (GMAW)

Acetylene is commonly used in a gas welding torch. Give the molecular formula for acetylene.

Description : Acetylene is commonly used in a gas welding torch. Give the molecular formula for acetylene. 

Last Answer : ANSWER: C2H2 or HC2H or H2C2

Sketch and label different types of gas welding flames. Also give application of any one flame.

Description : Sketch and label different types of gas welding flames. Also give application of any one flame.

Last Answer : 1) Neutral Flame: - A neutral flame is obtained when equal amounts of oxygen and acetylene are mixed and burnt in a torch.   Applications: - stainless steel, cast iron, copper ,mild ... when acetylene is supplied more than oxygen.   Applications:-high carbon steel, nonferrous alloy 

State the working principle of gas welding.

Description : State the working principle of gas welding.

Last Answer : Working principle of gas welding: Gas Welding is a fusion welding process. It joins metals, using the heat of combustion of the oxygen/air and combustible gas (i.e. acetylene, hydrogen, propane, ... the components to be forced together under pressure until the weld is forms and solidifies. 

List various types of flames used in gas welding.

Description : List various types of flames used in gas welding. 

Last Answer : Answer: 1. Neutral Flame 2. Oxidizing Flame 3. Carburizing Flame 

Piped Natural Gas (PNG) is used for (1) Mining (2) Welding (3) Anaesthesia (4) Cooking

Description : Piped Natural Gas (PNG) is used for (1) Mining (2) Welding (3) Anaesthesia (4) Cooking

Last Answer : Cooking

If I Mount My Compressor Sideways, Like On The Frame Rail Of My Truck, Is There Anything I Should Be Careful Of When Doing This?

Description : If I Mount My Compressor Sideways, Like On The Frame Rail Of My Truck, Is There Anything I Should Be Careful Of When Doing This?

Last Answer : you mount your compressor sideways to the frame rail, you should periodically check to make sure that your compressor is mounted securely. Use a thread-locking compound to keep the screws from backing off and causing the compressor to be mounted loosely.

The statement --- if forces acting on a point can be represented in magnitude and direction by the sides of a polygon taken in order then their resultant will be represented in magnitude and direction by the closing side of the polygon taken in opposite order ---- is known as a.Law of triangle of forces b.Newton's law of forces c.Law of polygon of forces d.D'Alembert's rule e.Lami's theorem

Description : The statement --- if forces acting on a point can be represented in magnitude and direction by the sides of a polygon taken in order then their resultant will be represented in magnitude and direction by the closing ... 's law of forces c.Law of polygon of forces d.D'Alembert's rule e.Lami's theorem

Last Answer : c. Law of polygon of forces

A cannon of weight 10 tonnes fires a shell of 50 kg with a muzzle velocity of 900 m/sec at an angle of 30?. The time taken for the shell to emerge from the barrel is 0.004 sec. The velocity of the cannon would be a.3.9 m/sec b.7.8 m/sec c.8.95 m/sec d.1.95 m/sec e.5.85 m/sec

Description : A cannon of weight 10 tonnes fires a shell of 50 kg with a muzzle velocity of 900 m/sec at an angle of 30?. The time taken for the shell to emerge from the barrel is 0.004 sec. The velocity of the cannon would be a.3.9 m/sec b.7.8 m/sec c.8.95 m/sec d.1.95 m/sec e.5.85 m/sec

Last Answer : a. 3.9 m/sec

A block slides down a smooth inclined plane when released from the top while another falls freely from the same point. The value of which parameter in the two cases will be identical? a.Time taken to reach the ground b.Kinetic energy at the ground c.Momentum at the ground d.Velocity while touching the ground e.Kinetic energy after one second

Description : A block slides down a smooth inclined plane when released from the top while another falls freely from the same point. The value of which parameter in the two cases will be identical? a.Time ... ground c.Momentum at the ground d.Velocity while touching the ground e.Kinetic energy after one second

Last Answer : d. Velocity while touching the ground

Which of the following statement is false? a.The potential energy of a particle has the form Ep = k2x. The force acting on the particle is constant (k is a constant) b.The linear velocity of bodies near the earth's equator (due to rotation of earth) is more than the velocities of particles at the pole c.107 dynes d.A cyclist should move along a zig-zag path while ascending a steep hill e.The density of milk decreases when cream is taken out of milk

Description : Which of the following statement is false? a.The potential energy of a particle has the form Ep = k2x. The force acting on the particle is constant (k is a constant) b.The linear velocity of ... zag path while ascending a steep hill e.The density of milk decreases when cream is taken out of milk

Last Answer : e. The density of milk decreases when cream is taken out of milk

Mention What Are The Precaution Measures Taken By The Repair And Maintenance Worker At Working Site?

Description : Mention What Are The Precaution Measures Taken By The Repair And Maintenance Worker At Working Site?

Last Answer : The precaution measures taken at the working site is:  Overhead and side clearances are adequate to permit the safe operation of the lift truck  Aisles, floors and passageways should be ... of vapours from the refueling and operation of its lift trucks, workplace should be adequately ventilated.

The word tractor was taken from A. French B. Sanskrit B. Latin D. Japanese

Description : The word tractor was taken from A. French B. Sanskrit B. Latin D. Japanese

Last Answer : Latin

The absolute zero temperature is taken as  A. -273°C  B. 273°C  C. 237°C  D. -237°C

Description : The absolute zero temperature is taken as  A. -273°C  B. 273°C  C. 237°C  D. -237°C

Last Answer : Answer: A

This one is for the ladies. What are some mannerisms you catch yourself doing that can be taken as obvious signs you're into somone?

Description : This one is for the ladies. What are some mannerisms you catch yourself doing that can be taken as obvious signs you're into somone?

Last Answer : Hair flip. Touching them. Eye contact. Saying their name often.

What 8 letter word can have a letter taken away and it still makes a word. Take another letter away and it still makes a word. Keep on doing that until you have one letter left. What is the word? -Riddles

Description : What 8 letter word can have a letter taken away and it still makes a word. Take another letter away and it still makes a word. Keep on doing that until you have one letter left. What is the word? -Riddles

Last Answer : The word is starting! starting, staring, string, sting, sing, sin, in, I. Cool,huh?

What are the safety measures to be taken while doing Radiography?

Description : What are the safety measures to be taken while doing Radiography?

Last Answer : Ensure a competent person is surveying outside the barricaded area with survey meter. The crew is authorized and following safety precautions. The controlled area is calculated, evacuated and barricaded with Yellow/Black tapes, warning signs (a minimum 4 no’s) and Red or Yellow flash lights.

What are precautions to be taken while doing maintenance or repair work on power cables?

Description : What are precautions to be taken while doing maintenance or repair work on power cables?  

Last Answer : A research organised by EPRI (electric power research institute) on medium voltage XLPE cables found that DC high potential at 80% of the factory value a. Subsequently reduces the life of ... of cramped conductor strands is achieved otherwise it will add resistance and create over heating.