Description : When the electrolyte level of a lead-acid storage battery has decreased due to normal evaporation, the level should be reestablished by adding _____________. A. distilled water only B. sulfuric acid ... of sulfuric acid and distilled water D. a strong solution of sulfuric acid and distilled water
Last Answer : Answer: A
Description : The electrolyte used in a nickel-cadmium battery is distilled water and ______________. A. diluted sulfuric acid B. potassium hydroxide C. lead sulfate D. zinc oxide
Last Answer : Answer: B
Description : When mixing electrolyte for a lead-acid storage battery, you should pour the ___________. A. distilled water into the acid in a zinc-plated container B. distilled water into the acid in a glass ... into the distilled water in a zinc-plated container D. acid into distilled water in a glass container
Last Answer : Answer: D
Description : The proper way to mix the electrolyte for a battery is to add _____________. A. acid to alkaline water B. acid to distilled water C. alkaline water to acid D. distilled water to acid
Description : If the illustrated device is fully discharged, what will be the result? EL-0061 A. The battery will be short circuited because the mud space will be filled with lead sulfate B. The electrolyte ... minimum sulfuric acid. D. The plates will be maximum lead oxide and sponge lead minimum lead sulfate.
Last Answer : Answer: C
Description : If violent gassing occurs when a lead-acid storage battery is first placed on charge, the _____________. A. battery must be given an emergency charge B. charging rate is too low C. charging rate is too high D. specific gravity of the electrolyte solution is too low
Description : The state of charge of a lead acid storage battery is best indicated by the _____________. A. testing of the individual cell voltages B. ampere hour capacity of the battery C. specific gravity of the electrolyte D. total cell voltages
Description : Which of the problems listed will occur if a lead-acid battery is allowed to remain in a discharged condition for a long period of time? A. The battery may be unable to accept a full charge ... . C. The concentrated sulfuric acid will attack the lead peroxide plates. D. The separators will harden.
Description : When a nickel-cadium battery begins gassing while connected to the battery charging circuit, you should _____________. A. do nothing as this is a normal condition when charging B. add distilled water ... to each cell to increase the specific gravity of the electrolyte D. decrease the charging rate
Description : Local action in a dry-cell, or lead-acid storage battery is the process whereby ________________. A. hydrogen gas is liberated B. the electrolyte compensates for overcharging C. potassium hydroxide ... carbon dioxide from the air D. the battery becomes discharged without being connected to a load
Description : From the standpoint of safety, you should never allow salt water to enter a leadacid storage battery or come in contact with sulfuric acid because ______________. A. the resulting gas is ... peroxide D. combining salt water with lead-acid creates an invisible gas resulting in severe corrosion
Description : During discharge of a lead-acid storage battery, which of the following actions occurs? A. The acid becomes stronger. B. Both plates change chemically to ammonium chloride. C. The acid becomes weaker. D. Hydrogen gas is liberated.
Description : The plates of a NiCad storage battery are made of ________. A. potassium hydroxide with a small amount of sulfuric acid B. lead and lead peroxide C. silver oxide and lead sulfate D. combinations of nickel powder and nickel & cadmium salts
Description : If the illustrated device is fully discharged, what will be the result? EL-0061 A. The plates will be maximum lead sulfate minimum sponge lead and lead oxide, the electrolyte will be ... lead oxide and sponge lead minimum lead sulfate, the electrolyte will be maximum water minimum sulfuric acid
Description : The specific gravity of the electrolyte solution in a lead acid battery _____________. A. is not effected during charging B. remains the same during discharge C. would read close to 1.830 when discharged D. gives an indication of the state of charge of the battery
Description : The specific gravity of the electrolyte in a lead-acid battery is measured by a _____________. A. gould plate B. titration pipette C. hydrometer D. litmus paper test
Description : Violent gassing from a lead-acid battery while it is being charged, indicates that the _____________. A. plate separators are grounded B. battery compartment ventilation is inadequate C. electrolyte specific gravity is too low D. charging rate is too high
Description : The freezing point of the electrolyte in a fully charged lead-acid battery will be _____________. A. higher than in a discharged battery B. lower than in a discharged battery C. the same as in a discharged battery D. higher than in a discharged battery, but the specific gravity will be less
Description : When mixing electrolyte for a lead-acid storage battery, ______________. A. stirring should always be avoided B. a lead container should always be used C. always pour the water into the acid D. always pour the acid into the water
Description : When troubleshooting a lead-acid storage battery, a weak or dead cell is best detected by _________________. A. measuring and comparing all cells' specific gravity B. taking an open circuit ... electrolyte levels of each cell D. taking each cell's temperature with a calibrated mercury thermometer
Description : When charging a nickel-cadmium battery, ____________. A. the charging rate should be lessened when gassing commences B. overcharging should be avoided C. the specific gravity of the electrolyte will be ... by the state of charge D. add distilled water just prior to charging to insure proper mixing
Description : What acid is prevalent in the human stomach? w) sulfuric acid x) nitric acid y) muriatic acid z) amino acids
Last Answer : ANSWER: Y -- MURIATIC ACID
Description : Which of the listed forms of water should be added to a lead-acid battery? A. saltwater B. brackish water C. distilled water D. light water
Description : Caution must be exercised during the charging of lead-acid storage batteries as _____________. A. the acid will become weaker B. hydrogen gas is being continuously liberated C. both plates are changing chemically to lead sulfate D. lead peroxide in the negative plate is poisonous
Description : Maintenance of alkaline batteries should include _________. A. checking the electrolyte weekly using a hydrometer B. replacing the electrolyte every 5 years C. top off with sulfuric acid as needed D. making certain connections are tight and clean
Description : Which of the following acids serves as an electrolyte in a lead storage battery? (1) Sulphuric acid (2) Lactic acid (3) Hydrochloric acid (4) Nitric acid
Last Answer : (1) Sulphuric acid Explanation: Dilute sulfuric acid (H2SO4) serves as the electrolyte in a lead-acid battery. Dilute sulfuric acid used for lead acid battery has ratio (to water) of 3:1 other components of the battery include: Lead peroxide (PbO2) and Sponge lead (Pb).
Last Answer : Sulphuric acid
Description : Which of the following activities occurs during the charging process of a lead-acid storage battery? A. The specific gravity of the acid increases. B. Both plates change chemically to lead sulfate. C. The specific gravity of the acid decreases. D. Hydrogen gas is absorbed.
Description : Which of the following conditions indicates that a lead-acid battery is being charged too rapidly? A. Sparks occurring at the positive terminal. B. Unusually high electrolyte specific gravity. C. Low plate potentials being developed. D. Excessively high temperatures and gassing rates.
Description : Which of the listed ranges represents specific gravity corrected for temperature for the electrolyte of a fully charged portable lead-acid battery? A. 1.100 to 1.150 B. 1.180 to 1.200 C. 1.280 to 1.300 D. 1.750 to 2.000
Description : The state of charge of a lead-acid battery is best indicated by the ____________. A. individual cell voltage B. ampere-hour capacity C. electrolyte specific gravity D. total cell voltage
Description : When charging a 100 amp-hour lead-acid battery, ___________. A. the temperature of the electrolyte should not be allowed to exceed 90°F B. the charging rate should be no greater than 125% of the ... nearing full charge and it will be necessary to reduce the charging current to a low finishing rate
Description : A breakable, mercury-filled thermometer should not be used in a lead-acid battery to measure electrolyte temperature, as an accidental breakage can cause ____________. A. severe sparking and explosions ... battery plates C. violent gassing at the positive plates D. corrosion on the battery terminals
Description : Which of the following temperatures represents the maximum allowable temperature for the electrolyte of a lead-acid battery? A. 100°F B. 125°F C. 145°F D. 212°F
Description : The charge of a lead-acid battery can be restored by ______. A. passing an alternating electric current through the cell B. passing a direct electric current through the cell C. adding acid to the electrolyte D. all of the above
Description : A lead-acid battery is considered fully charged when the ______________. A. electrolyte gasses freely B. battery charger ammeter indicates a positive reading C. terminal voltage reaches a constant value at a ... cells reaches the correct value and no longer increases over a period of 1 to 4 hours
Description : How you will prepare electrolyte for a lead acid battery?
Last Answer : While preparing electrolyte for lead acid battery sulphuric acid is added to distilled water.
Description : The standard procedure for maintaining the charge in an emergency diesel starting battery is to trickle charge the battery _____________. A. continuously B. at least once each week C. whenever the charge falls to 75% of full charge D. whenever the electrolyte specific gravity falls to 1.250 or lower
Description : Local action in a nickel-cadmium battery is offset by _____________. A. separating the positive and negative plates with plastic spacers B. separating the positive and negative plates with resin impregnated spacers C. adding a small amount of lithium hydroxide to the electrolyte D. trickle charging
Description : Write the molecular formulae of: 1. Copper oxide 2. Iron (III) chloride 3. Sodium hydroxide 4. Iron (II) sulphide 5. Lead (II) oxide 6. Hydrogen nitrate (nitric ... Hydrogen sulphate (sulphuric acid) 8. Calcium hydroxide 9. Magnesium carbonate 10.Ammonium carbonate
Last Answer : 1. Copper oxide - CuO 2. Iron (III) chloride - FeCl3 3. Sodium hydroxide - NaOH 4. Iron (II) sulphide - FeS 5. Lead (II) oxide - PbO 6. Hydrogen nitrate (nitric acid) - HNO3 7. ... ) - H2SO4 8. Calcium hydroxide - Ca(OH)2 9. Magnesium carbonate - MgCO3 10.Ammonium carbonate - (NH4)2CO3
Description : When troubleshooting an alkaline storage battery a weak or dead cell is best located by ____________. A. checking the specific gravity of each cell B. visually inspecting each cell's ... testing each cell with a voltmeter D. measuring the electrolyte temperature with an accurate mercury thermometer
Description : Proper storage battery maintenance includes ____________. A. keeping connections tight and casing surfaces clean B. making sure electrolyte level is below the separator plates C. insulating the terminals with naval jelly D. maintaining a high charging rate at all times
Description : A slow continual loss of electrolyte level from one cell of a storage battery could be due to _______________. A. a cracked casing B. too low a charging rate C. the specific gravity being higher than normal D. one filler cap installed too tightly
Description : The charge of a lead-acid battery is checked with a _____________. A. manometer B. hydrometer C. viscosimeter D. ohmmeter
Description : When a lead-acid battery begins gassing freely while receiving a normal charge, the charging current should _____________. A. be increased B. remain unchanged C. be decreased D. shut off
Description : When a lead-acid battery begins gassing freely while receiving a normal charge, the charging current should be _____________. A. increased B. shut off C. decreased D. unchanged
Description : The open-circuit voltage of a fully charged lead-acid battery cell is _____________. A. 1.5 volts B. 1.8 volts C. 2.0 volts D. 2.3 volts
Description : When lead-acid batteries are charging, they always give off hydrogen gas that is _____________. A. considered inert B. highly explosive C. extremely toxic D. heavier than air
Description : The electrolyte in a lead-acid battery is a) H2SO4 b) HNO3 c) HCl d) NaCl Ans. a
Last Answer : ans a
Description : What is the specific gravity of electrolyte used in lead acid battery?
Last Answer : 1280 at full charge and 1180 at discharge.