In an impressed current cathodic protection system, the anode is ____________. A. connected to the hull and deteriorates with time B. insulated from the hull and does not waste away C. connected to the hull but does not waste away D. insulated from the hull but deteriorates with time

In an impressed current cathodic protection system, the anode is ____________. A. connected to the hull and deteriorates with time B. insulated from the hull and does not waste away C. connected to the hull but does not waste away D. insulated from the hull but deteriorates with time
by

1 Answer

Answer :

Answer: B
by

Related questions

The purpose of an impressed current cathodic protection system aboard ship is to _______________. A. prevent corrosion of the hull, propeller, rudder and line shafting B. neutralize the vessel's stray magnetic fields which would interfere with radar C. protect engine room and deck machinery from oxidation in the presence of salt air D. maintain a minimum constant alternator load to prevent overheating

Description : The purpose of an impressed current cathodic protection system aboard ship is to _______________. A. prevent corrosion of the hull, propeller, rudder and line shafting B. neutralize the vessel's ... the presence of salt air D. maintain a minimum constant alternator load to prevent overheating

Last Answer : Answer: A

Impressed current cathodic protection is used on vessels instead of _________________. A. fire alarm systems B. repeated painting C. sacrificial zincs D. vacuum tube degaussing systems

Description : Impressed current cathodic protection is used on vessels instead of _________________. A. fire alarm systems B. repeated painting C. sacrificial zincs D. vacuum tube degaussing systems

Last Answer : Answer: C

Sacrificial anode method is used in the protection of pipelines which are buried underground. Sacrificial anode (A) Occurs higher in the electro-chemical series of metals (B) Is exemplified by magnesium plate (C) Is much cheaper than the cathodic base material to be guarded against corrosion (D) All (A), (B) & (C)

Description : Sacrificial anode method is used in the protection of pipelines which are buried underground. Sacrificial anode (A) Occurs higher in the electro-chemical series of metals (B) Is exemplified by magnesium plate (C) ... cathodic base material to be guarded against corrosion (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

The amount of current flow required for the cathodic protection of a vessel is dependent upon the _________. A. amount of bare steel surface B. speed of the ship through the water C. temperature of the water D. all of the above

Description : The amount of current flow required for the cathodic protection of a vessel is dependent upon the _________. A. amount of bare steel surface B. speed of the ship through the water C. temperature of the water D. all of the above

Last Answer : Answer: D

Before touching a small capacitor connected to a de-energized circuit, or even one that is completely disconnected, you should ____________. A. gently tap the body with a screwdriver B. tag it with a de-energized tag C. be equipped with an insulated fuse puller D. short circuit the terminals to make sure that the capacitor is discharged

Description : Before touching a small capacitor connected to a de-energized circuit, or even one that is completely disconnected, you should ____________. A. gently tap the body with a screwdriver B. tag it ... insulated fuse puller D. short circuit the terminals to make sure that the capacitor is discharged

Last Answer : Answer: D

The circuit shown in the illustration represents a ________. EL-0090 A. battery charging circuit B. synchronous exciter C. depth sounding unit D. cathodic protection system

Description : The circuit shown in the illustration represents a ________. EL-0090 A. battery charging circuit B. synchronous exciter C. depth sounding unit D. cathodic protection system

Last Answer : Answer: D

The method used to produce electron emission in most vacuum tubes is known as ____________. A. photoelectric emission B. secondary electric emission C. cold cathodic electric emission D. thermionic emission

Description : The method used to produce electron emission in most vacuum tubes is known as ____________. A. photoelectric emission B. secondary electric emission C. cold cathodic electric emission D. thermionic emission

Last Answer : Answer: D

When using a megohmmeter to determine which shunt field coil is grounded in a DC machine, you must ____________. A. insulate the field frame from the ship's hull B. disconnect each shunt field coil before testing C. use a motor driven high capacity megohmmeter D. remove all main line lead connections before testing

Description : When using a megohmmeter to determine which shunt field coil is grounded in a DC machine, you must ____________. A. insulate the field frame from the ship's hull B. disconnect each shunt ... C. use a motor driven high capacity megohmmeter D. remove all main line lead connections before testing

Last Answer : Answer: B

The device in figure 'B' shown in the illustration will conduct when the ____________. EL-0067 A. base-emitter is forward biased and the collector-base is reverse biased B. anode-cathode is forward biased and the cathode-gate is forward biased C. source-gate is forward biased and the gate-drain is reversed biased D. terminal 1-2 is forward biased and the emitter-terminal 1 is reverse biased

Description : The device in figure 'B' shown in the illustration will conduct when the ____________. EL-0067 A. base-emitter is forward biased and the collector-base is reverse biased B. anode-cathode is forward ... is reversed biased D. terminal 1-2 is forward biased and the emitter-terminal 1 is reverse biased

Last Answer : Answer: B

Leads on the device in figure 'B' shown in the illustration are named ____________. EL-0067 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Description : Leads on the device in figure 'B' shown in the illustration are named ____________. EL-0067 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: D

Galvanising (i.e., zinc coating) of steel sheets is done to (A) Prevent its rusting by contact with corrosive atmosphere (B) Protect the base metal by cathodic protection (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Galvanising (i.e., zinc coating) of steel sheets is done to (A) Prevent its rusting by contact with corrosive atmosphere (B) Protect the base metal by cathodic protection (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Anodic material used for the cathodic protection of underground buried steel pipeline is (A) Nickel or copper (B) Zinc or magnesium (C) Bronze (D) Brass

Description : Anodic material used for the cathodic protection of underground buried steel pipeline is (A) Nickel or copper (B) Zinc or magnesium (C) Bronze (D) Brass

Last Answer : (B) Zinc or magnesium

Galvanic corrosion cannot be prevented by (A) Cathodic protection (B) Anodic protection (C) Usage of largest possible anodic area (D) Any one of these

Description : Galvanic corrosion cannot be prevented by (A) Cathodic protection (B) Anodic protection (C) Usage of largest possible anodic area (D) Any one of these

Last Answer : Option B

Explain cathodic protection. Give one example.

Description : Explain cathodic protection. Give one example.

Last Answer : Cathodic protection: It is the method in which the metal to be protected is forced to behave as a cathode. Examples: 1) To protect buried water or gas pipelines. 2) To protect buried cables. 3) ... water box coolers. 6) To protect water tanks. 7) To protect transmission line towers, etc.  

The schematic diagram shown in the illustration represents which of the listed solid-state circuits? EL-0069 A. Bridge rectifier B. Magnetic amplifier C. Flip-flop generator D. Cathodic amplifier

Description : The schematic diagram shown in the illustration represents which of the listed solid-state circuits? EL-0069 A. Bridge rectifier B. Magnetic amplifier C. Flip-flop generator D. Cathodic amplifier

Last Answer : Answer: A

When an operating motor is connected to the controller shown in the illustration, the a path of current flow through the circuit is ____________. EL-0010 A. 'L1', stop button, start button, coil 'CR', 'L2' B. 'L1', stop button, 'CR' and 'M' contacts, 'M' coil, 'OL contacts, the 'CR' coil in parallel, 'L2' C. 'L1', stop button, jog button, 'CR' contact, 'CR' relay, 'L2' D. 'L1', stop button, start button, 'CR' contact, 'M' contact, 'CR' coil, 'L2'

Description : When an operating motor is connected to the controller shown in the illustration, the a path of current flow through the circuit is ____________. EL-0010 A. 'L1', stop button, start button, coil 'CR', 'L2' B. 'L1' ... L2' D. 'L1', stop button, start button, 'CR' contact, 'M' contact, 'CR' coil, 'L2'

Last Answer : Answer: B

One important difference between wye-connected and delta-connected generators is that delta connections have ____________. A. line voltages equal to the vector sum of the phase voltages B. phase voltages 90° out of sync C. line current equal to the phase current D. line voltage equal to the phase voltage

Description : One important difference between wye-connected and delta-connected generators is that delta connections have ____________. A. line voltages equal to the vector sum of the phase voltages B. phase voltages 90° ... C. line current equal to the phase current D. line voltage equal to the phase voltage

Last Answer : Answer: D

A fuse will 'blow' if _____________. A. an electric motor is stopped suddenly by opening a switch B. the flow of current to the protection device is reversed C. the electrical current exceeds the rated value of the fuse D. unequal resistors are connected in parallel

Description : A fuse will 'blow' if _____________. A. an electric motor is stopped suddenly by opening a switch B. the flow of current to the protection device is reversed C. the electrical current exceeds the rated value of the fuse D. unequal resistors are connected in parallel

Last Answer : Answer: C

One of the generator or motor bearings is generally insulated from the end housing in order to prevent ________. A. rapid brush wear B. current leakage from the shaft C. excessive field winding heat D. circulation of shaft currents induced in the machine's frame

Description : One of the generator or motor bearings is generally insulated from the end housing in order to prevent ________. A. rapid brush wear B. current leakage from the shaft C. excessive field winding heat D. circulation of shaft currents induced in the machine's frame

Last Answer : Answer: D

The component labeled 'CR1' in the circuit shown in the illustration __________________. EL-0085 A. varies its anode/cathode polarity depending on 'RL' current B. rectifies the varying voltage from the collector of 'Q1' C. acts as a low capacitive reactance to smooth ripple D. establishes a constant reference voltage for the base of 'Q1'

Description : The component labeled 'CR1' in the circuit shown in the illustration __________________. EL-0085 A. varies its anode/cathode polarity depending on 'RL' current B. rectifies the varying voltage from the ... reactance to smooth ripple D. establishes a constant reference voltage for the base of 'Q1'

Last Answer : Answer: D

To properly use a hook-on-type volt/ammeter to check current flow, you must FIRST _____________. A. de-energize the circuit to allow connection of the instrument in series B. hook the jaws of the instrument around the insulated conductor C. connect the voltage test leads to the appropriate terminals D. short the test leads and calibrate the instrument to zero

Description : To properly use a hook-on-type volt/ammeter to check current flow, you must FIRST _____________. A. de-energize the circuit to allow connection of the instrument in series B. hook the jaws ... test leads to the appropriate terminals D. short the test leads and calibrate the instrument to zero

Last Answer : Answer: B

In twisted pair cable, two insulated wires are twisted around each other which provides protection against noise. Explain. -Technology

Description : In twisted pair cable, two insulated wires are twisted around each other which provides protection against noise. Explain. -Technology

Last Answer : Twisting the cables keep them close together so that, any external magnetic fields must cross both cable at the same time, so the interference created in one cable is cancelled by the almost exact opposite amount of interference in the other.

(3) made cathode and a pure nickel red, the anode Explanation: Electroplating is the deposition by electrolysis of a coating of metal upon a conducting surface. The simplest system makes the object to be plated the negative electrode (cathode) or plate in a galvanic couple. Thus a spoon or other object may be connected by a wire to a plate of nickel. The process that occurs on the spoon is called reduction and, therefore, the spoon is also referred to as a cathode.

Description : (3) made cathode and a pure nickel red, the anode Explanation: Electroplating is the deposition by electrolysis of a coating of metal upon a conducting surface. The simplest system makes the object to be ... on the spoon is called reduction and, therefore, the spoon is also referred to as a cathode.

Last Answer : Which of the following is not a method of preparing oxygen? (1) Electrolysis of water (2) Fractional distillation of liquid air (3) Decomposition of potassium permanganate (4) Decomposition of manganese dioxide

The speed of a series wound winch motor is controlled by ____________. A. varying the voltage applied to the motor B. the weight of the load on the cargo boom C. overcurrent protection devices in the motor D. a hydraulic speed-limiting governor

Description : The speed of a series wound winch motor is controlled by ____________. A. varying the voltage applied to the motor B. the weight of the load on the cargo boom C. overcurrent protection devices in the motor D. a hydraulic speed-limiting governor

Last Answer : Answer: A

A molded-case breaker provides protection against short circuits by using a/an ____________. A. shading coil B. arc quencher C. electromagnet D. holding coil

Description : A molded-case breaker provides protection against short circuits by using a/an ____________. A. shading coil B. arc quencher C. electromagnet D. holding coil

Last Answer : Answer: C

A circuit that has one of two wires in contact with the hull of a ship, is called a _____________. A. grounded circuit B. short circuit C. series circuit D. closed circuit

Description : A circuit that has one of two wires in contact with the hull of a ship, is called a _____________. A. grounded circuit B. short circuit C. series circuit D. closed circuit

Last Answer : Answer: A

The symbol at coordinates '15R' in the illustration indicate a connection to ___________. EL-0100 A. the analog circuitry common bus B. ground C. the vessel's hull D. the console's chassis

Description : The symbol at coordinates '15R' in the illustration indicate a connection to ___________. EL-0100 A. the analog circuitry common bus B. ground C. the vessel's hull D. the console's chassis

Last Answer : Answer: A

The symbol at coordinates '11R' in the illustration indicate a connection to _____________. EL-0100 A. ground B. the console chassis C. the digital circuitry common bus D. earth through the vessel's hull

Description : The symbol at coordinates '11R' in the illustration indicate a connection to _____________. EL-0100 A. ground B. the console chassis C. the digital circuitry common bus D. earth through the vessel's hull

Last Answer : Answer: C

In electronic circuits, DC voltages can be positive (+) or negative (-) when measured with respect to the _________. A. printed circuit board 'common' trace B. chassis, console frame or hull 'ground' C. analogue or digital circuitry 'common' bus D. all of the above

Description : In electronic circuits, DC voltages can be positive (+) or negative (-) when measured with respect to the _________. A. printed circuit board 'common' trace B. chassis, console frame or hull 'ground' C. analogue or digital circuitry 'common' bus D. all of the above

Last Answer : Answer: D

Where is the statement of all pipes connected to a storage vessel should be insulated for up to a metre in length is a requirement of Building Regulations Part?

Description : Where is the statement of all pipes connected to a storage vessel should be insulated for up to a metre in length is a requirement of Building Regulations Part?

Last Answer : P

A squid axon is placed on stimulating electrodes, and an intracellular electrode is inserted and connected through a cathode-ray oscilloscope (CRO) to an indifferent electrode. When the axon is stimulated, the latent period is 1.5 ms. The intracellular electrode is 6 cm form the anode of the simulator and 4.5 cm from the cathode of the simulator. What is the conduction velocity of the axon. a. 15 m/s b. 30 m/s c. 40 m/s d. 67.5 m/s e. This cannot be determined from the information given

Description : A squid axon is placed on stimulating electrodes, and an intracellular electrode is inserted and connected through a cathode-ray oscilloscope (CRO) to an indifferent electrode. When the axon is stimulated, the latent ... . 40 m/s d. 67.5 m/s e. This cannot be determined from the information given

Last Answer : 30 m/s

Without strapping, the resonant cavities of a hole-and-slot anode are connected in what manner?

Description : Without strapping, the resonant cavities of a hole-and-slot anode are connected in what manner?

Last Answer : Series.

If you use any Yahoo products or services, are you afraid of losing that capability as Yahoo deteriorates?

Description : If you use any Yahoo products or services, are you afraid of losing that capability as Yahoo deteriorates?

Last Answer : answer:I use yahoo mail as an alternative email address for anonymity (I use gmail for most of my mail). If I lost yahoo mail it would be a minor inconvenience. I still have a “my yahoo” news page, but it has become so reduced over the years, I wouldn’t miss it after a week or so.

Do you find that the quality of the toilet paper on a standard size roll deteriorates as the quantity of sheets per roll increases?

Description : Do you find that the quality of the toilet paper on a standard size roll deteriorates as the quantity of sheets per roll increases?

Last Answer : I haven’t noticed. Are you assigning us another thing to which we should pay attention?

Strategic drift is…. A. When strategies progressively fail to address the environmental dynamics, and performance deteriorates. B. Mismatch between Vision Statement and Value Statement C. Mismatch between Vision Statement and Mission Statement D. Mismatch between Mission Statement and Resources

Description : Strategic drift is…. A. When strategies progressively fail to address the environmental dynamics, and performance deteriorates. B. Mismatch between Vision Statement and Value Statement C. Mismatch between Vision Statement and Mission Statement D. Mismatch between Mission Statement and Resources

Last Answer : When strategies progressively fail to address the environmental dynamics, and performance deteriorates.

Strategic drift is…. A. When strategies progressively fail to address the environmental dynamics, and performance deteriorates. B. Mismatch between Vision Statement and Value Statement C. Mismatch between Vision Statement and Mission Statement D. Mismatch between Mission Statement and Resources

Description : Strategic drift is…. A. When strategies progressively fail to address the environmental dynamics, and performance deteriorates. B. Mismatch between Vision Statement and Value Statement C. Mismatch between Vision Statement and Mission Statement D. Mismatch between Mission Statement and Resources

Last Answer : When strategies progressively fail to address the environmental dynamics, and performance deteriorates.

The tissue structure deteriorates as the virus multiplies. This deterioration is called A.aneuploidy B.protopathic effect C.cytopathic effect D.none of these

Description : The tissue structure deteriorates as the virus multiplies. This deterioration is called A.aneuploidy B.protopathic effect C.cytopathic effect D.none of these

Last Answer : C.cytopathic effect

Which of the following reflect the pathophysiology of cutaneous signs of HIV disease? a) Immune function deterioration Cutaneous signs may be the first manifestations of HIV, appearing in more than 90 per cent of HIV infected patients as the immune function deteriorates. Common complaints include pruritis, folliculitis, and chronic actinic dermatitis.

Description : Which of the following reflect the pathophysiology of cutaneous signs of HIV disease? a) Immune function deterioration Cutaneous signs may be the first manifestations of HIV, appearing in more ... Decrease in normal skin flora Cutaneous signs of HIV disease appear as immune function deteriorates.

Last Answer : a) Immune function deterioration Cutaneous signs may be the first manifestations of HIV, appearing in more than 90 per cent of HIV infected patients as the immune function deteriorates. Common complaints include pruritis, folliculitis, and chronic actinic dermatitis.

What happens to a company when it increases the A/P lag? a. It improves its cash position. b. It deteriorates its cash position. c. It loses credibility. d. Its suppliers withhold material for production. e. a, d.

Description : What happens to a company when it increases the A/P lag? a. It improves its cash position. b. It deteriorates its cash position. c. It loses credibility. d. Its suppliers withhold material for production. e. a, d.

Last Answer : e. a, d.

Software deteriorates rather than wears out because (A) software suffers from exposure to hostile environments. (B) defects are more likely to arise after software has been used often. (C) multiple change requests introduce errors in component interactions. (D) software spare parts become harder to order.

Description : Software deteriorates rather than wears out because (A) software suffers from exposure to hostile environments. (B) defects are more likely to arise after software has been used often. ( ... requests introduce errors in component interactions. (D) software spare parts become harder to order.

Last Answer : (B) defects are more likely to arise after software has been used often.

If fuse #1 shown in the illustration is defective, a voltage tester connected across points 'C' and 'B' will ____________. EL-0062 A. show a reading of 55 volts B. show full line voltage across the fuse C. give positive indication that fuse #2 is good D. give positive indication that fuse #1 is defective

Description : If fuse #1 shown in the illustration is defective, a voltage tester connected across points 'C' and 'B' will ____________. EL-0062 A. show a reading of 55 volts B. show full line voltage ... C. give positive indication that fuse #2 is good D. give positive indication that fuse #1 is defective

Last Answer : Answer: D

The dry-cell batteries, when connected as shown in the illustration, would produce ____________. EL-0070 A. 1.5 volts B. 2.5 volts C. 3.5 volts D. 4.5 volts

Description : The dry-cell batteries, when connected as shown in the illustration, would produce ____________. EL-0070 A. 1.5 volts B. 2.5 volts C. 3.5 volts D. 4.5 volts

Last Answer : Answer: A

The dry-cell batteries, shown in the illustration are connected in ____________. EL-0070 A. compound B. series C. parallel D. tandem

Description : The dry-cell batteries, shown in the illustration are connected in ____________. EL-0070 A. compound B. series C. parallel D. tandem

Last Answer : Answer: C

As shown in the illustration, the dry-cell batteries are connected in ____________. EL-0071 A. compound B. series C. parallel D. tandem

Description : As shown in the illustration, the dry-cell batteries are connected in ____________. EL-0071 A. compound B. series C. parallel D. tandem

Last Answer : Answer: B

A megohmmeter is connected to each end of an individual motor winding. A low ohm reading indicates ____________. A. an open coil B. a loose coil C. good continuity D. a dirty coil

Description : A megohmmeter is connected to each end of an individual motor winding. A low ohm reading indicates ____________. A. an open coil B. a loose coil C. good continuity D. a dirty coil

Last Answer : Answer: C

If a transformer is connected to a DC source, the transformer will overload at the ____________. A. contacts B. primary coil C. secondary coil D. core

Description : If a transformer is connected to a DC source, the transformer will overload at the ____________. A. contacts B. primary coil C. secondary coil D. core

Last Answer : Answer: B

The shunt used in an ammeter should be connected in ____________. A. series with the load and in parallel with the meter movement B. parallel with the load and in series with the meter movement C. parallel with the load and in parallel with the meter movement D. series with the load and in series with the meter movement

Description : The shunt used in an ammeter should be connected in ____________. A. series with the load and in parallel with the meter movement B. parallel with the load and in series with the meter movement C. ... in parallel with the meter movement D. series with the load and in series with the meter movement

Last Answer : Answer: A