What precaution should be taken with a vessel's impressed current cathodic protection system after a drydocking period during which the hull has been painted? A. Output currents should be carefully monitored to assure operation at nearly 100 % capacity for proper curing. B. Reference cell voltages should be maintained at half the normal range for approximately 48 hours. C. The unit should remain off for the specified amount of time so as not to disturb curing. D. A slight (10-15%) overcurrent to the anodes should be allowed in order to speed drying.

What precaution should be taken with a vessel's impressed current cathodic protection system after a drydocking period during which the hull has been painted? A. Output currents should be carefully monitored to assure operation at nearly 100 % capacity for proper curing. B. Reference cell voltages should be maintained at half the normal range for approximately 48 hours. C. The unit should remain off for the specified amount of time so as not to disturb curing. D. A slight (10-15%) overcurrent to the anodes should be allowed in order to speed drying.
by

1 Answer

Answer :

Answer: C
by

Related questions

The purpose of an impressed current cathodic protection system aboard ship is to _______________. A. prevent corrosion of the hull, propeller, rudder and line shafting B. neutralize the vessel's stray magnetic fields which would interfere with radar C. protect engine room and deck machinery from oxidation in the presence of salt air D. maintain a minimum constant alternator load to prevent overheating

Description : The purpose of an impressed current cathodic protection system aboard ship is to _______________. A. prevent corrosion of the hull, propeller, rudder and line shafting B. neutralize the vessel's ... the presence of salt air D. maintain a minimum constant alternator load to prevent overheating

Last Answer : Answer: A

In an impressed current cathodic protection system, the anode is ____________. A. connected to the hull and deteriorates with time B. insulated from the hull and does not waste away C. connected to the hull but does not waste away D. insulated from the hull but deteriorates with time

Description : In an impressed current cathodic protection system, the anode is ____________. A. connected to the hull and deteriorates with time B. insulated from the hull and does not waste away C. connected to the hull but does not waste away D. insulated from the hull but deteriorates with time

Last Answer : Answer: B

Impressed current cathodic protection is used on vessels instead of _________________. A. fire alarm systems B. repeated painting C. sacrificial zincs D. vacuum tube degaussing systems

Description : Impressed current cathodic protection is used on vessels instead of _________________. A. fire alarm systems B. repeated painting C. sacrificial zincs D. vacuum tube degaussing systems

Last Answer : Answer: C

The purpose of a magnetic relay is to _____________. A. open a circuit only in the event of overload B. remotely open and close contacts C. provide overcurrent protection during starting D. relay voltages at increased power

Description : The purpose of a magnetic relay is to _____________. A. open a circuit only in the event of overload B. remotely open and close contacts C. provide overcurrent protection during starting D. relay voltages at increased power

Last Answer : Answer: B

The amount of current flow required for the cathodic protection of a vessel is dependent upon the _________. A. amount of bare steel surface B. speed of the ship through the water C. temperature of the water D. all of the above

Description : The amount of current flow required for the cathodic protection of a vessel is dependent upon the _________. A. amount of bare steel surface B. speed of the ship through the water C. temperature of the water D. all of the above

Last Answer : Answer: D

A circuit breaker for a 300 KW alternator is rated at 470 amperes of full continuous load. The amount of overcurrent allowed is 125%. Which of the following conditions will trip the breaker? A. Sustained current flow of 470 amperes. B. Sustained current flow of 500 amperes for 10 minutes. C. Momentary starting load of 550 amperes. D. Sustained current flow of 590 amperes.

Description : A circuit breaker for a 300 KW alternator is rated at 470 amperes of full continuous load. The amount of overcurrent allowed is 125%. Which of the following conditions will trip the breaker? A. ... 10 minutes. C. Momentary starting load of 550 amperes. D. Sustained current flow of 590 amperes.

Last Answer : Answer: D

Periodic testing of circuit breakers is necessary to assure that a correctly rated and properly installed unit _________________. A. can trip faster as it increases in age B. will continue to provide the original degree of protection C. does not exceed its interrupting capacity D. be able to withstand at least 125% of applied voltage

Description : Periodic testing of circuit breakers is necessary to assure that a correctly rated and properly installed unit _________________. A. can trip faster as it increases in age B. will continue to provide ... not exceed its interrupting capacity D. be able to withstand at least 125% of applied voltage

Last Answer : Answer: B

You are testing the insulation in an AC generator with a megohmeter. The resistance value of a dry, clean winding will ____________. A. continue to rise as the test potential is maintained, becoming fairly steady as the leakage current stabilizes B. remain constant as the temperature of the windings increases C. continue to drop as the potential is maintained, becoming fairly steady after 5 to 7 minutes D. stabilize after approximately 2 to 4 minutes of fluctuation

Description : You are testing the insulation in an AC generator with a megohmeter. The resistance value of a dry, clean winding will ____________. A. continue to rise as the test potential is maintained, ... fairly steady after 5 to 7 minutes D. stabilize after approximately 2 to 4 minutes of fluctuation

Last Answer : Answer: A

The circuit shown in the illustration represents a ________. EL-0090 A. battery charging circuit B. synchronous exciter C. depth sounding unit D. cathodic protection system

Description : The circuit shown in the illustration represents a ________. EL-0090 A. battery charging circuit B. synchronous exciter C. depth sounding unit D. cathodic protection system

Last Answer : Answer: D

The speed of a series wound winch motor is controlled by ____________. A. varying the voltage applied to the motor B. the weight of the load on the cargo boom C. overcurrent protection devices in the motor D. a hydraulic speed-limiting governor

Description : The speed of a series wound winch motor is controlled by ____________. A. varying the voltage applied to the motor B. the weight of the load on the cargo boom C. overcurrent protection devices in the motor D. a hydraulic speed-limiting governor

Last Answer : Answer: A

In a three-phase electrical system, three ground detecting lamps are provided. If all three lamps REMAIN at half-brilliance when the ground detecting test switch is operated, ______________. A. there is a slight ground on all three phases B. the switch must be replaced C. there are no grounds present D. the light bulbs are of improper voltage

Description : In a three-phase electrical system, three ground detecting lamps are provided. If all three lamps REMAIN at half-brilliance when the ground detecting test switch is operated, ______________. A. there is a ... must be replaced C. there are no grounds present D. the light bulbs are of improper voltage

Last Answer : Answer: C

In electronic circuits, DC voltages can be positive (+) or negative (-) when measured with respect to the _________. A. printed circuit board 'common' trace B. chassis, console frame or hull 'ground' C. analogue or digital circuitry 'common' bus D. all of the above

Description : In electronic circuits, DC voltages can be positive (+) or negative (-) when measured with respect to the _________. A. printed circuit board 'common' trace B. chassis, console frame or hull 'ground' C. analogue or digital circuitry 'common' bus D. all of the above

Last Answer : Answer: D

The research papers writing methodology has slight variations in reference to Options: A) The standards maintained by research journals B) The interests of the researchers C) The research traditions D) All of the above statements are correct with slight variations

Description : The research papers writing methodology has slight variations in reference to Options: A) The standards maintained by research journals B) The interests of the researchers C) The research traditions D) All of the above statements are correct with slight variations

Last Answer : D) All of the above statements are correct with slight variations 

Answer: e The role of nutritional support in the cancer patient remains an important component of overall therapy. Preoperative nutritional support should be given only to those patients who do not require an emergency operation and who have severe weight loss (> 15% of pre-illness body weight) and a serum albumen < 2.9 mg%. Preoperative nutrition (enteral or parenteral) should not be given for longer than 7 to 10 days. Enteral nutrition is always the preferred route of feeding cancer patients if the GI tract is functional. There are several benefits of using the bowel lumen for nutrient delivery. The trophic effects of enteral feeding on small bowel mucosa have been well described. The integrity of the mucosal lining is maintained and it may provide an effective barrier to intraluminal

Description : Answer: e The role of nutritional support in the cancer patient remains an important component of overall therapy. Preoperative nutritional support should be given only to those patients who ... of bowel rest; this atrophy is not reversed by currently available total parenteral nutrition solutions

Last Answer : Which of the following hormones can be expected to be released as part of the stress response? a. Antidiuretic hormone (ADH) b. Aldosterone c. Insulin d. Epinephrine nswer: a, b, d ... This hormone has the exact opposite effect of insulin, which promotes glucose storage and uptake by the cells

Which of the following statements is true concerning simple parallel resistance circuits? A. The total current flow equals the sum of the individual currents. B. The total current flow equals the reciprocal of the sum of the individual currents. C. The total resistance equals the sum of the individual resistance. D. The total voltage equals the sum of the individual voltages across each resistance.

Description : Which of the following statements is true concerning simple parallel resistance circuits? A. The total current flow equals the sum of the individual currents. B. The total current flow equals the ... resistance. D. The total voltage equals the sum of the individual voltages across each resistance.

Last Answer : Answer: A

Which of the following statements concerning a simple parallel resistance circuit is correct? A. The voltage drop across each resistor is the same. B. The total current flow equals the reciprocal of the sum of the individual currents. C. The total resistance equals the sum of the individual resistances. D. The total voltage equals the sum of the individual voltages across each resistance.

Description : Which of the following statements concerning a simple parallel resistance circuit is correct? A. The voltage drop across each resistor is the same. B. The total current flow equals the reciprocal ... resistances. D. The total voltage equals the sum of the individual voltages across each resistance.

Last Answer : Answer: A

The purpose of the automatic bus transfer shown in the illustration is to ___________. EL-0014 A. stepdown voltage to the lighting distribution panel B. provide emergency power to the lighting distribution panel C. energize the emergency switchboard from the main switchboard D. provide overcurrent protection to the lighting distribution panel

Description : The purpose of the automatic bus transfer shown in the illustration is to ___________. EL-0014 A. stepdown voltage to the lighting distribution panel B. provide emergency power to ... emergency switchboard from the main switchboard D. provide overcurrent protection to the lighting distribution panel

Last Answer : Answer: B

A nickel-cadmium battery is receiving a normal charge and gases freely. The charging current should _____________. A. be increased B. be decreased C. be cut off and the battery allowed to cool D. remain the same

Description : A nickel-cadmium battery is receiving a normal charge and gases freely. The charging current should _____________. A. be increased B. be decreased C. be cut off and the battery allowed to cool D. remain the same

Last Answer : Answer: D

If a drug is eliminated by first order kinetics: A. A constant amount of the drug will be eliminated per unit time B. Its clearance value will remain constant C. Its elimination half life will increase with dose D. It will be completely eliminated from the body in 2 × half life period

Description : If a drug is eliminated by first order kinetics: A. A constant amount of the drug will be eliminated per unit time B. Its clearance value will remain constant C. Its elimination half life will increase with dose D. It will be completely eliminated from the body in 2 × half life period

Last Answer : B. Its clearance value will remain constant

If a drug is eliminated by first order kinetics: A. A constant amount of the drug will be eliminated per unit time B. Its clearance value will remain constant C. Its elimination half life will increase with dose D. It will be completely eliminated from the body in 2 × half life period

Description : If a drug is eliminated by first order kinetics: A. A constant amount of the drug will be eliminated per unit time B. Its clearance value will remain constant C. Its elimination half life will increase with dose D. It will be completely eliminated from the body in 2 × half life period

Last Answer : B. Its clearance value will remain constant

The symbol at coordinates '15R' in the illustration indicate a connection to ___________. EL-0100 A. the analog circuitry common bus B. ground C. the vessel's hull D. the console's chassis

Description : The symbol at coordinates '15R' in the illustration indicate a connection to ___________. EL-0100 A. the analog circuitry common bus B. ground C. the vessel's hull D. the console's chassis

Last Answer : Answer: A

The symbol at coordinates '11R' in the illustration indicate a connection to _____________. EL-0100 A. ground B. the console chassis C. the digital circuitry common bus D. earth through the vessel's hull

Description : The symbol at coordinates '11R' in the illustration indicate a connection to _____________. EL-0100 A. ground B. the console chassis C. the digital circuitry common bus D. earth through the vessel's hull

Last Answer : Answer: C

If reading AC current with the illustrated device and unsure of the range as a precaution , the first step should be to _________. EL-0047 A. secure power and test for voltage B. disconnect the lead to be tested and connect the meter in series C. connect the meter to measure resistance and use Ohm's law to calculate current D. unable to safely measure current with the device

Description : If reading AC current with the illustrated device and unsure of the range as a precaution , the first step should be to _________. EL-0047 A. secure power and test for voltage B. disconnect the ... resistance and use Ohm's law to calculate current D. unable to safely measure current with the device

Last Answer : Answer: A

What precaution should be taken while removing a current operated relay when the equipment is in service?

Description : What precaution should be taken while removing a current operated relay when the equipment is in service?

Last Answer : Ensure that the CT is not getting opened by shorting the appropriate terminals. (Eventhough the terminals are automatically shorted once relay is removed the above point may carried out to ensure the same) 

Pick up the correct statement from the following: (A) Phase of a wave is expressed as a fraction of a period with respect to a reference (B) Phase is usually specified by angular measure with one period being 360° (C) The reference for finding the phase of a wave is taken from the previous passage through zero from the negative to the positive direction (D) All of these

Description : Pick up the correct statement from the following: (A) Phase of a wave is expressed as a fraction of a period with respect to a reference (B) Phase is usually specified by angular measure with ... from the previous passage through zero from the negative to the positive direction (D) All of these

Last Answer : Answer: Option D

Electrostatic type instruments are mainly used for measurement of: a) Heavy currents b) Low currents c) Low voltages d) High voltages

Description : Electrostatic type instruments are mainly used for measurement of: a) Heavy currents b) Low currents c) Low voltages d) High voltages

Last Answer : Ans: D

Nickel-cadmium batteries are superior to lead-acid batteries at high discharge rates because they _______________. A. deliver a large amount of power and can be recharged in a shorter time B. need fewer cells in connected series and less mounting space C. have higher output voltages and require no maintenance D. all of the above

Description : Nickel-cadmium batteries are superior to lead-acid batteries at high discharge rates because they _______________. A. deliver a large amount of power and can be recharged in a shorter time B. need ... less mounting space C. have higher output voltages and require no maintenance D. all of the above

Last Answer : Answer: A

It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The equilibrium moisture content of the solid is 5%). (A) 15 min (B) 51 min (C) 71 min (D) 94 min

Description : It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The ... 5%). (A) 15 min (B) 51 min (C) 71 min (D) 94 min

Last Answer : (C) 71 min

The electrical supply applied to the anodes shown in the illustration is _____________. EL-0090 A. low voltage, high current DC B. low voltage, high current AC C. high voltage, low current DC D. high voltage, low current AC

Description : The electrical supply applied to the anodes shown in the illustration is _____________. EL-0090 A. low voltage, high current DC B. low voltage, high current AC C. high voltage, low current DC D. high voltage, low current AC

Last Answer : Answer: A

Which of the following is the least expensive protection for overcurrent is low voltage system ? (a) Rewireable fuse (b) Isolator (c) Oil circuit breaker (d) Air break circuit breaker (e) None of the above

Description : Which of the following is the least expensive protection for overcurrent is low voltage system ? (a) Rewireable fuse (b) Isolator (c) Oil circuit breaker (d) Air break circuit breaker (e) None of the above

Last Answer : (a) Rewireable fuse

If the steering stand selector switch is allowed to remain in the 'Non-Followup' mode after testing of the steering gear, the rudder will _____________. EL-0097 A. not respond to commands from the helm B. move in one direction only regardless of the movement of the helm C. not respond to output from the rotary actuator D. stop moving only when the helm is counter-rotated to put the pump at neutral stroke

Description : If the steering stand selector switch is allowed to remain in the 'Non-Followup' mode after testing of the steering gear, the rudder will _____________. EL-0097 A. not respond to commands from the ... actuator D. stop moving only when the helm is counter-rotated to put the pump at neutral stroke

Last Answer : Answer: A

On electrical generators one of the bearings is isolated from the bedplate. This insulating block should not be painted and must be kept clean to ___________. A. protect operating personnel from shock B. create an isolated ground for the instrumentation C. allow for the expansion of the generator away from the prime mover as it warms up D. eliminate shaft currents to prevent damaging the bearings

Description : On electrical generators one of the bearings is isolated from the bedplate. This insulating block should not be painted and must be kept clean to ___________. A. protect operating personnel from shock ... the prime mover as it warms up D. eliminate shaft currents to prevent damaging the bearings

Last Answer : Answer: D

Approximately how many eggs does a female silkworm lay in 24 hours after the proper copulation with the male moth in India ? (A) 200(B) 1200 (C) 100 (D) 400 (E) None of these

Description : Approximately how many eggs does a female silkworm lay in 24 hours after the proper copulation with the male moth in India ? (A) 200(B) 1200 (C) 100 (D) 400 (E) None of these

Last Answer : (B) 1200

The emergency electrical power source on tank vessels over 500 GT on an international voyage, should be capable of continuous operation under emergency load for _____________. A. 6 hours B. 12 hours C. 18 hours D. 24 hours

Description : The emergency electrical power source on tank vessels over 500 GT on an international voyage, should be capable of continuous operation under emergency load for _____________. A. 6 hours B. 12 hours C. 18 hours D. 24 hours

Last Answer : Answer: C

A proclamation has been issued against absconded requiring him to appear at a specified place and at a specified time not less than a) 30 days b) one week c) 15 days d) 48 Hours

Description : A proclamation has been issued against absconded requiring him to appear at a  specified place and at a specified time not less than a) 30 days b) one week c) 15 days d) 48 Hours

Last Answer : a) 30 days

Which of the following is a SaaS characteristic? a) The typical license is subscription-based or usage-based and is billed on a recurring basis b) The software is available over the Internet globally through a browser on demand c) The software and the service are monitored and maintained by the vendor d) All of the mentioned

Description : Which of the following is a SaaS characteristic? a) The typical license is subscription-based or usage-based and is billed on a recurring basis b) The software is available over the Internet ... The software and the service are monitored and maintained by the vendor d) All of the mentioned

Last Answer : All of the mentioned

Which of the following is a SaaS characteristic? A. The typical license is subscription-based or usage-based and is billed on a recurring basis B. The software is available over the Internet globally through a browser on demand C. The software and the service are monitored and maintained by the vendor D. All of the above

Description : Which of the following is a SaaS characteristic? A. The typical license is subscription-based or usage-based and is billed on a recurring basis B. The software is available over the Internet globally ... . The software and the service are monitored and maintained by the vendor D. All of the above

Last Answer : All of the above

Which of the following is a SaaS characteristic? a) The typical license is subscription-based or usage-based and is billed on a recurring basis b) The software is available over the Internet globally through a browser on demand c) The software and the service are monitored and maintained by the vendor d) All of the mentioned

Description : Which of the following is a SaaS characteristic? a) The typical license is subscription-based or usage-based and is billed on a recurring basis b) The software is available over the Internet globally ... The software and the service are monitored and maintained by the vendor d) All of the mentioned

Last Answer : All of the mentioned

An instantaneous-trip-type fuse will _____________. A. open as soon as the load current exceeds its set point B. allow a preset delay between overcurrent and melting C. open a circuit by using a time delay element with a magnetic trip D. reset itself when the overcurrent is corrected

Description : An instantaneous-trip-type fuse will _____________. A. open as soon as the load current exceeds its set point B. allow a preset delay between overcurrent and melting C. open a circuit by using a time delay element with a magnetic trip D. reset itself when the overcurrent is corrected

Last Answer : Answer: A

Inverse definite minimum time lag relay is also called ___________ (A) pilot relay. (B) differential relay. (C) over current relay. (D) directional overcurrent relay.

Description : Inverse definite minimum time lag relay is also called ___________ (A) pilot relay. (B) differential relay. (C) over current relay. (D) directional overcurrent relay.

Last Answer : Ans: B Inverse definite minimum time lag relay characteristic is inverse but minimum time is fixed. The operating time is inversely proportional to the magnitude of actuating quantity.

Which one of the following sets of parameters should be monitored for determining safe operation of journal bearing? [IES-2000] Oil pressure, bearing metal temperature and bearing vibration (b) Bearing vibration, oil pressure and speed of shaft (c) Bearing metal temperature and oil pressure (d) Oil pressure and bearing vibration

Description : Which one of the following sets of parameters should be monitored for determining safe operation of journal bearing? [IES-2000] Oil pressure, bearing metal temperature and bearing vibration (b) ... shaft (c) Bearing metal temperature and oil pressure (d) Oil pressure and bearing vibration

Last Answer : Oil pressure, bearing metal temperature and bearing vibration