Define Cementation. Name its types.

Define Cementation. Name its types.
by

1 Answer

Answer :

Cementation: It is the process of heating the base metal in a revolving drum containing a powder of coating metal.

Types:

i) Sherardizing

ii) Chromizing

iii) Colorizing
by

Related questions

Define lubricant. Give the classification of lubricants with at least one example of each type.

Description : Define lubricant. Give the classification of lubricants with at least one example of each type.

Last Answer : Lubricant: Any substance introduced between two moving or sliding surface to reduce the frictional resistance between them is known as lubricant. Classification: i) Solid lubricants: Examples: graphite, ... acids like oleic acid, Stearic acid etc., silicones, blended oils, and mineral oils.

Define fuel. Give the classification of fuel based on their occurrence with two examples of each type.

Description : Define fuel. Give the classification of fuel based on their occurrence with two examples of each type.

Last Answer : Fuel: A fuel can be defined as any combustible substance which during combustion gives large amount of heat energy.  Classification of Fuel : I) Primary or Natural Physical State i) Solid - e.g wood ... diesel oil, lubricating oil iii)Gaseous- e.g LPG, water gas ,producer gas ,coal gas, biogas

Define cloud point and viscosity index of a lubricant

Description : Define cloud point and viscosity index of a lubricant

Last Answer : Cloud point: Cloud point indicates the temperature at which the oil becomes cloudy in appearance, due to separation of wax. Viscosity Index: The rate of change of viscosity of a liquid (Oil) with the change of temperature is known as viscosity index.

Define calorific value & ignition temperature

Description : Define calorific value & ignition temperature 

Last Answer : Calorific value: - It is defined as “the total amount of heat produced by the complete combustion of unit mass or unit volume of the fuel.” Ignition temperature:-It is the minimum temperature at which combustion of a fuel takes place when the firing is once started.

Define heat treatment. Give any two purposes of heat treatment.

Description : Define heat treatment. Give any two purposes of heat treatment.

Last Answer : Heat treatment:- The process of heating steel to a certain high temperature and then cooling it at a controlled rate in order to develop certain physical properties without changing its chemical composition ... 7) To remove trapped gases. 8) To improve machinability and mechanical properties.

Name two important ores of iron? Mention its formula.

Description : Name two important ores of iron? Mention its formula.

Last Answer : Name two important ores of iron? Mention its formula.

What is used as a photocatalyst? a) Titanium dioxide b) Lead chromate c) Cobalt pigments d) Iron oxide

Description : What is used as a photocatalyst? a) Titanium dioxide b) Lead chromate c) Cobalt pigments d) Iron oxide

Last Answer : a) Titanium dioxide

Which raw material is used to impart colour to the glass? a) Al2O3 b) CoO c) CaO d) MgO

Description : Which raw material is used to impart colour to the glass? a) Al2O3 b) CoO c) CaO d) MgO

Last Answer : b) CoO

Suggest the type of lubricant used for the following jobs: i) Clock ii) I.C. Engines iii) Gears iv) Sewing machine

Description : Suggest the type of lubricant used for the following jobs: i) Clock ii) I.C. Engines iii) Gears iv) Sewing machine

Last Answer : i) Clock : Vegetable and animal oils like palm oil, hazel nut oil, neat foot oil, etc ii) I.C. Engines: Mineral oils containing additives are used. iii) Gears: Thick mineral oils containing ... Mineral oil, silicones, thin vegetable and animal oils like palm oil, hazel nut oil, neat foot oil.

Explain boundary lubrication with diagram.

Description : Explain boundary lubrication with diagram.

Last Answer : Boundary lubrication: This type of lubrication is done when a continuous fluid film of lubricant cannot persist & direct metal to metal contact is possible due to certain reasons. This happens when i) a ... which is responsible for this kind of adsorption is Oiliness.   Diagram 

Describe sacrificial anodic protection with neat diagram.

Description : Describe sacrificial anodic protection with neat diagram.

Last Answer : Method: The metallic structure to be protected from corrosion is connected to anodic metal (upper placed in galvanic series) by an insulated wire. Thus externally added metal like Zn, Al, Mg, etc ... hot water tanks to prevent corrosion. The protection of underground pipelines is shown in Fig.

Name and describe the method used for coating large and irregularly shaped articles for prevention of corrosion.

Description : Name and describe the method used for coating large and irregularly shaped articles for prevention of corrosion.

Last Answer : Metal spraying is the method used for coating large and irregularly shaped articles for prevention of corrosion. Diagram: Process:- In this method ,coating metal sprayed on the surface of ... . The molten metal then sprayed on the surface of base metal with the help of compressed air.

Explain the mechanism of oxidation corrosion

Description : Explain the mechanism of oxidation corrosion

Last Answer : The electrons are transferred from metal atom to oxygen. Metal loses electron while oxygen accepts electron forms their respective ions these two types of ion combine together to from metal oxide. 

Write composition, 2 properties and two uses of CNG.

Description : Write composition, 2 properties and two uses of CNG.

Last Answer : Properties: - 1) It is cheaper than petrol or diesel. 2) Its ignition temp is high (5400C). 3) It is odorless & non corrosive. 4) It is light weight gas. 5) ... petrol / CNG) 2) It is also used in locomotive generators to generate electricity that drives the motors of the train.

Explain the significance of proximate analysis.

Description : Explain the significance of proximate analysis. 

Last Answer : Significance: Proximate analysis provides following valuable information in assessing the quality of fuel i) Moisture: - Lesser the moisture better is the quality of coal. ii) Volatile Matter: - Lower / ... iv) Fixed Carbon: - Higher the percentage of fixed carbon, greater is the calorific value.

Distinguish between hardening and normalising.

Description : Distinguish between hardening and normalising.

Last Answer : Hardening Normalizing 1. It is the process of heating steel at high temperature (800-9000C) and then suddenly cooled by dipping or quenching in some suitable medium. 1. It is the ... hardening. 6. It creates stresses in structure 6. It removes coarser grained structure.

Give the classification of plain carbon steel. Write composition, one property and one use of different plain carbon steel.

Description : Give the classification of plain carbon steel. Write composition, one property and one use of different plain carbon steel.

Last Answer : Classification: a) Mild or low carbon steel - 0.05 to 0.3% carbon b) Medium carbon steel - 0.3 to 0.6% carbon c) High carbon steel - 0.6 to 1.5% carbon ... Wooden working tools, chisels, saws, drills, metal cutting tools for lathes, cutters, knives, blades, razors etc.

Write chemical reactions taking place in zone of reduction of blast furnace.

Description : Write chemical reactions taking place in zone of reduction of blast furnace.

Last Answer : Write chemical reactions taking place in zone of reduction of blast furnace.

Distinguish between solid fuel and liquid fuel.

Description : Distinguish between solid fuel and liquid fuel.

Last Answer : Property Solid Liquid 1.Calorific Value Low Higher 2.Ignition Temperature  Very high Moderate 3.Cost  Cheap Costly 4.Ash content High Negligible 5.Velocity of combustion Non controllable Easily Controllable

Give two applications of biodiesel.

Description : Give two applications of biodiesel.

Last Answer : 1) It is an alternative fuel formulated exclusively for diesel engines with little or no modification in engines. 2) It is also used as a heating fuel in domestic & commercial boilers. 3) It is used in rockets.

List any four constituents of paint.

Description : List any four constituents of paint. 

Last Answer : 1) Pigments 2) Drying Oil / Medium 3) Thinners 4) Driers5) Extenders 6) Plasticizers

Name any four factors affecting electrochemical corrosion.

Description : Name any four factors affecting electrochemical corrosion.

Last Answer : A) Nature of metal:  1) Position of metal in a galvanic series: A metal having higher position in a galvanic series has more chemical reactivity and therefore, it gets attacked by gaseous and ... as a conducting medium and promotes corrosion. e.g:- Rusting of Fe is promoted in humid atmosphere.

What is the effect of alloying element Cr & V on the properties of steel?

Description : What is the effect of alloying element Cr & V on the properties of steel?

Last Answer : Effect of alloying element Cr:- i) It increases hardness, toughness and tensile strength. ii) It increases wear resistance and resistance to corrosion. Effect of alloying element V:  ... tensile strength, ductility and shock resistance. ii) It increases air hardening and cutting quality.

State any two functions of Blast furnace.

Description : State any two functions of Blast furnace.

Last Answer : 1. To reduce the ore to metallic. 2. To remove the impurities in the form of slag.

For given applied voltage, with the increase in frequency of the applied voltage?

Description : For given applied voltage, with the increase in frequency of the applied voltage?

Last Answer : For given applied voltage, with the increase in frequency of the applied voltage eddy current loss will remain unchanged.

Define cementation. Describe sherardizing with help of neat labeled diagram

Description : Define cementation. Describe sherardizing with help of neat labeled diagram

Last Answer : Cementation: Cementation is the process in which metal coatings are obtained by heating the base metal in a revolving drum containing a powder of the coating metal.   Process: i) The iron articles ... iron forming Fe - Zn alloy at the surface which protects iron surface from corrosion.   

Softer variety of steel may be obtained by (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth

Description : Softer variety of steel may be obtained by (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth

Last Answer : Answer: Option C

The steel which contains fissures and cavities, is manufactured by (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Description : The steel which contains fissures and cavities, is manufactured by (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Last Answer : Answer: Option A

The process of manufacturing steel by heating short lengths of wrought iron bars mixed with charcoal in fire clay crucibles and collecting the molten iron into moulds, is known as (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Description : The process of manufacturing steel by heating short lengths of wrought iron bars mixed with charcoal in fire clay crucibles and collecting the molten iron into moulds, is known as (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Last Answer : Answer: Option B

The process of decarbonising the pig iron completely and then adding proper percentage of carbon for manufacturing steel, is called (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Description : The process of decarbonising the pig iron completely and then adding proper percentage of carbon for manufacturing steel, is called (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Last Answer : Answer: Option A

Cast steel is manufactured by (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth proce

Description : Cast steel is manufactured by (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Last Answer : Answer: Option B

Blister steel (A) Is obtained by cementation process (B) Is full of fissures and cavities (C) Can be easily welded (D) All the above

Description : Blister steel (A) Is obtained by cementation process (B) Is full of fissures and cavities (C) Can be easily welded (D) All the above

Last Answer : Answer: Option D

If temporary cementation is required, which cement will you use: A. ZOE B. Zinc Polycarboxylate C. GIC

Description : If temporary cementation is required, which cement will you use:  A. ZOE  B. Zinc Polycarboxylate  C. GIC 

Last Answer : A. ZOE