List any four constituents of paint. 

1 Answer

Answer :

1) Pigments 2) Drying Oil / Medium 3) Thinners 4) Driers5) Extenders 6) Plasticizers

Related questions

Description : Name any four factors affecting electrochemical corrosion.

Last Answer : A) Nature of metal:  1) Position of metal in a galvanic series: A metal having higher position in a galvanic series has more chemical reactivity and therefore, it gets attacked by gaseous and ... as a conducting medium and promotes corrosion. e.g:- Rusting of Fe is promoted in humid atmosphere.

Description : What is used as a photocatalyst? a) Titanium dioxide b) Lead chromate c) Cobalt pigments d) Iron oxide

Last Answer : a) Titanium dioxide

Description : Which raw material is used to impart colour to the glass? a) Al2O3 b) CoO c) CaO d) MgO

Last Answer : b) CoO

Description : Suggest the type of lubricant used for the following jobs: i) Clock ii) I.C. Engines iii) Gears iv) Sewing machine

Last Answer : i) Clock : Vegetable and animal oils like palm oil, hazel nut oil, neat foot oil, etc ii) I.C. Engines: Mineral oils containing additives are used. iii) Gears: Thick mineral oils containing ... Mineral oil, silicones, thin vegetable and animal oils like palm oil, hazel nut oil, neat foot oil.

Description : Explain boundary lubrication with diagram.

Last Answer : Boundary lubrication: This type of lubrication is done when a continuous fluid film of lubricant cannot persist & direct metal to metal contact is possible due to certain reasons. This happens when i) a ... which is responsible for this kind of adsorption is Oiliness.   Diagram 

Description : Define lubricant. Give the classification of lubricants with at least one example of each type.

Last Answer : Lubricant: Any substance introduced between two moving or sliding surface to reduce the frictional resistance between them is known as lubricant. Classification: i) Solid lubricants: Examples: graphite, ... acids like oleic acid, Stearic acid etc., silicones, blended oils, and mineral oils.

Description : Describe sacrificial anodic protection with neat diagram.

Last Answer : Method: The metallic structure to be protected from corrosion is connected to anodic metal (upper placed in galvanic series) by an insulated wire. Thus externally added metal like Zn, Al, Mg, etc ... hot water tanks to prevent corrosion. The protection of underground pipelines is shown in Fig.

Description : Name and describe the method used for coating large and irregularly shaped articles for prevention of corrosion.

Last Answer : Metal spraying is the method used for coating large and irregularly shaped articles for prevention of corrosion. Diagram: Process:- In this method ,coating metal sprayed on the surface of ... . The molten metal then sprayed on the surface of base metal with the help of compressed air.

Description : Explain the mechanism of oxidation corrosion

Last Answer : The electrons are transferred from metal atom to oxygen. Metal loses electron while oxygen accepts electron forms their respective ions these two types of ion combine together to from metal oxide. 

Description : Write composition, 2 properties and two uses of CNG.

Last Answer : Properties: - 1) It is cheaper than petrol or diesel. 2) Its ignition temp is high (5400C). 3) It is odorless & non corrosive. 4) It is light weight gas. 5) ... petrol / CNG) 2) It is also used in locomotive generators to generate electricity that drives the motors of the train.

Description : Explain the significance of proximate analysis. 

Last Answer : Significance: Proximate analysis provides following valuable information in assessing the quality of fuel i) Moisture: - Lesser the moisture better is the quality of coal. ii) Volatile Matter: - Lower / ... iv) Fixed Carbon: - Higher the percentage of fixed carbon, greater is the calorific value.

Description : Define fuel. Give the classification of fuel based on their occurrence with two examples of each type.

Last Answer : Fuel: A fuel can be defined as any combustible substance which during combustion gives large amount of heat energy.  Classification of Fuel : I) Primary or Natural Physical State i) Solid - e.g wood ... diesel oil, lubricating oil iii)Gaseous- e.g LPG, water gas ,producer gas ,coal gas, biogas

Description : Distinguish between hardening and normalising.

Last Answer : Hardening Normalizing 1. It is the process of heating steel at high temperature (800-9000C) and then suddenly cooled by dipping or quenching in some suitable medium. 1. It is the ... hardening. 6. It creates stresses in structure 6. It removes coarser grained structure.

Description : Give the classification of plain carbon steel. Write composition, one property and one use of different plain carbon steel.

Last Answer : Classification: a) Mild or low carbon steel - 0.05 to 0.3% carbon b) Medium carbon steel - 0.3 to 0.6% carbon c) High carbon steel - 0.6 to 1.5% carbon ... Wooden working tools, chisels, saws, drills, metal cutting tools for lathes, cutters, knives, blades, razors etc.

Description : Write chemical reactions taking place in zone of reduction of blast furnace.

Last Answer : Write chemical reactions taking place in zone of reduction of blast furnace.

Description : Define cloud point and viscosity index of a lubricant

Last Answer : Cloud point: Cloud point indicates the temperature at which the oil becomes cloudy in appearance, due to separation of wax. Viscosity Index: The rate of change of viscosity of a liquid (Oil) with the change of temperature is known as viscosity index.

Description : Distinguish between solid fuel and liquid fuel.

Last Answer : Property Solid Liquid 1.Calorific Value Low Higher 2.Ignition Temperature  Very high Moderate 3.Cost  Cheap Costly 4.Ash content High Negligible 5.Velocity of combustion Non controllable Easily Controllable

Description : Give two applications of biodiesel.

Last Answer : 1) It is an alternative fuel formulated exclusively for diesel engines with little or no modification in engines. 2) It is also used as a heating fuel in domestic & commercial boilers. 3) It is used in rockets.

Description : Define calorific value & ignition temperature 

Last Answer : Calorific value: - It is defined as “the total amount of heat produced by the complete combustion of unit mass or unit volume of the fuel.” Ignition temperature:-It is the minimum temperature at which combustion of a fuel takes place when the firing is once started.

Description : Define Cementation. Name its types.

Last Answer : Cementation: It is the process of heating the base metal in a revolving drum containing a powder of coating metal. Types: i) Sherardizing ii) Chromizing iii) Colorizing

Description : What is the effect of alloying element Cr & V on the properties of steel?

Last Answer : Effect of alloying element Cr:- i) It increases hardness, toughness and tensile strength. ii) It increases wear resistance and resistance to corrosion. Effect of alloying element V:  ... tensile strength, ductility and shock resistance. ii) It increases air hardening and cutting quality.

Description : Define heat treatment. Give any two purposes of heat treatment.

Last Answer : Heat treatment:- The process of heating steel to a certain high temperature and then cooling it at a controlled rate in order to develop certain physical properties without changing its chemical composition ... 7) To remove trapped gases. 8) To improve machinability and mechanical properties.

Description : State any two functions of Blast furnace.

Last Answer : 1. To reduce the ore to metallic. 2. To remove the impurities in the form of slag.

Description : Name two important ores of iron? Mention its formula.

Last Answer : Name two important ores of iron? Mention its formula.

Description : For given applied voltage, with the increase in frequency of the applied voltage?

Last Answer : For given applied voltage, with the increase in frequency of the applied voltage eddy current loss will remain unchanged.

Description : (1) Calcium silicate and calcium alurninate Explanation: Portland cement is the most common type of cement in general use around the world because it is a basic ingredient of concrete, mortar, stucco ... limited amount of calcium sulfate (which controls the set time) and up to 5% minor constituents.

Last Answer : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved

Description : The metallic constituents of hard water are - (1) Magnesium, Calcium and tin (2) Iron, tin and calcium (3) Calcium, magnesium and iron (4) Magnesium, tin and iron

Last Answer : (3) Calcium, magnesium and iron Explanation: Hard water is water that has high mineral content (in contrast with "soft water"). Hard water is formed whenwater percolates through deposits of limestone and chalk which are largely made up of calcium and magnesium carbonates.

Description : Which hydrocarbons are the major constituents of 'LPG'? (1) Methane and Ethane (2) Propane and Butane (3) Pentane and Benzene (4) Only Methane

Last Answer : (2) Propane and Butane Explanation: Cooking gas, also known as Liquefied Petroleum Gas (LPG) is primarily propane (C3Hg) and butane (C4H10).

Description : One of the constituents of tear gas is - (1) Ethane (2) Ethanol (3) Ether (4) Chloropicrin

Last Answer : (4) Chloropicrin Explanation: Chloropicrin is a colourless liquid that is insoluble in water, with which it is stable. With a vapor pressure of 24 mm Hg, its volatility is between ... their eyes involuntarily. Chloropicrin can be absorbed systemically through inhalation, ingestion, and the skin.

Description : The constituents of automobile exhaust that can cause cancer is/are : (1) Oxides of nitrogen (2) Carbon monoxide (3) Polycyclic hydrocarbons (4) Lead

Last Answer : (2) Carbon monoxide Explanation: Lead is a naturally occuriing bluish-gray metal found in small amounts in the earth's crust. In the past, when lead was added to gasoline, breathing automobile ... found to be carcinogen. A substance that causes cancer or helps cancer grow is called a carcinogen.

Description : The metallic Constituents of hard water are – (1) Magnesium, calcium and tin (2) Iron, tin and calcium (3) Calcium, magnesium and iron (4) Magnesium, tin and iron

Last Answer : (3) Calcium, magnesium and iron Explanation: Hard water is water that has high mineral content. In domestic settings, hard water is often indicated by a lack of suds formation when soap is ... water hardness is a concern, water softening is commonly used to reduce hard water's adverse effects.

Description : What are the constituents of bead formed in borax bead test?

Last Answer : Ans: Sodium metaborate and boric anhydride

Description : What are the major constituents of typical fly ash particles generated from the combustion of coal? w) acidic and basic oxides x) trace elements y) unburned carbon z) sulfates and phosphates

Last Answer : ANSWER: W -- ACIDIC AND BASIC OXIDES 

Description : The constituents of automobile exhaust that can cause cancer is/are : (1) Oxides of nitrogen (2) Carbon monoxide (3) Polycyclic hydrocarbons (4) Lead

Last Answer : Lead

Description : One of the constituents of tear gas is (1) Ethane (2) Ethanol (3) Ether (4) Chloropicrin

Last Answer : Chloropicrin

Description : The metallic constituents of hard water are : (1) Magnesium, calcium and tin (2) Iron, tin and calcium (3) Calcium, magnesium and iron (4) Magnesium, tin and iron

Last Answer : Calcium, magnesium and iron

Description : What is the difference between constituents, and components on a food product let's say, milk?

Last Answer : Milk has vitamin A and D added.

Description : What are the constituents of the Parliament? -SST 10th

Last Answer : The Parliament consists of the Lok Sabha, the Rajya Sabha and the President.

Description : What are the main constituents of the core? -Geography

Last Answer : The main constituents of the core are nickel and iron. It is usually known as nife.

Description : 6. What are the constituents of phloem? -Science

Last Answer : Phloem tissue consists of conducting cells, generally called sieve elements, parenchyma cells, including both specialized companion cells or albuminous cells and unspecialized cells and supportive cells, such as fibres and sclereids.

Description : (a) State the constituents of phloem ? (b) How does cork act as a protective tissue ? -Biology 9th

Last Answer : answer:

Description : Bio gas is an excellent fuel. Justify the statement by giving two reasons. Mention the main constituents of bio gas along with its percentage. -Biology

Last Answer : (i) It burns without smoke and leave no residue therefore causes no atmospheric pollution. (ii)Its heating capacity is high, i.e. it has high calorific value. Main constituents of bio gas: The composition of bio gas varies ... 0 – 1% Hydrogen sulphide 0 – 3%

Description : Which constituents of the atmosphere causes greatest changes in climate and weather? -General Knowledge

Last Answer : The answer is 'WaterVapour'

Description : What are the metallic constituents of hard water? -Do You Know?

Last Answer : answer:

Description : Which constituents of the atmosphere causes greatest changes in climate and weather? -General Knowledge

Last Answer : answer:

Description : What are the main chemical constituents of bone ?

Last Answer : Bone chemical components ; Periosteum - This thin membrane on the outside of the bone is made up of nerves and arteries. It contains nerves and veins. Compact sister-- this is the outer ... combination of these two cells, the body gets its essential minerals. This work continues throughout life.

Description : What are the chemical constituents of genes ?

Last Answer : The chemical component of a gene is DNA.

Last Answer : Protein (non-vegetarian) organic large-molecule. Protein is a complex compound containing high mass nitrogen which is a polymer of amino acids. Polypeptide chain polymers are formed by binding many alpha ... basic substances are found. That is, many amino acids combine to form a protein molecule.

Description : Primary constituents of photochemical smog are

Last Answer : Primary constituents of photochemical smog are A. `SO_(2)` and CO B. `CO_(2)` and `NO_ ... (2)` and unsaturated hydrocarbons D. Hydrocarbons and CFCs.

Description : Write the constituents of prokaryotic cytoplasm.

Last Answer : Write the constituents of prokaryotic cytoplasm.