Name two important ores of iron? Mention its formula.

Name two important ores of iron? Mention its formula.
by

1 Answer

Answer :

Name two important ores of iron? Mention its formula.

image

by

Related questions

What is used as a photocatalyst? a) Titanium dioxide b) Lead chromate c) Cobalt pigments d) Iron oxide

Description : What is used as a photocatalyst? a) Titanium dioxide b) Lead chromate c) Cobalt pigments d) Iron oxide

Last Answer : a) Titanium dioxide

Define Cementation. Name its types.

Description : Define Cementation. Name its types.

Last Answer : Cementation: It is the process of heating the base metal in a revolving drum containing a powder of coating metal. Types: i) Sherardizing ii) Chromizing iii) Colorizing

Write composition, 2 properties and two uses of CNG.

Description : Write composition, 2 properties and two uses of CNG.

Last Answer : Properties: - 1) It is cheaper than petrol or diesel. 2) Its ignition temp is high (5400C). 3) It is odorless & non corrosive. 4) It is light weight gas. 5) ... petrol / CNG) 2) It is also used in locomotive generators to generate electricity that drives the motors of the train.

Define fuel. Give the classification of fuel based on their occurrence with two examples of each type.

Description : Define fuel. Give the classification of fuel based on their occurrence with two examples of each type.

Last Answer : Fuel: A fuel can be defined as any combustible substance which during combustion gives large amount of heat energy.  Classification of Fuel : I) Primary or Natural Physical State i) Solid - e.g wood ... diesel oil, lubricating oil iii)Gaseous- e.g LPG, water gas ,producer gas ,coal gas, biogas

Give two applications of biodiesel.

Description : Give two applications of biodiesel.

Last Answer : 1) It is an alternative fuel formulated exclusively for diesel engines with little or no modification in engines. 2) It is also used as a heating fuel in domestic & commercial boilers. 3) It is used in rockets.

Define heat treatment. Give any two purposes of heat treatment.

Description : Define heat treatment. Give any two purposes of heat treatment.

Last Answer : Heat treatment:- The process of heating steel to a certain high temperature and then cooling it at a controlled rate in order to develop certain physical properties without changing its chemical composition ... 7) To remove trapped gases. 8) To improve machinability and mechanical properties.

State any two functions of Blast furnace.

Description : State any two functions of Blast furnace.

Last Answer : 1. To reduce the ore to metallic. 2. To remove the impurities in the form of slag.

Which raw material is used to impart colour to the glass? a) Al2O3 b) CoO c) CaO d) MgO

Description : Which raw material is used to impart colour to the glass? a) Al2O3 b) CoO c) CaO d) MgO

Last Answer : b) CoO

Suggest the type of lubricant used for the following jobs: i) Clock ii) I.C. Engines iii) Gears iv) Sewing machine

Description : Suggest the type of lubricant used for the following jobs: i) Clock ii) I.C. Engines iii) Gears iv) Sewing machine

Last Answer : i) Clock : Vegetable and animal oils like palm oil, hazel nut oil, neat foot oil, etc ii) I.C. Engines: Mineral oils containing additives are used. iii) Gears: Thick mineral oils containing ... Mineral oil, silicones, thin vegetable and animal oils like palm oil, hazel nut oil, neat foot oil.

Explain boundary lubrication with diagram.

Description : Explain boundary lubrication with diagram.

Last Answer : Boundary lubrication: This type of lubrication is done when a continuous fluid film of lubricant cannot persist & direct metal to metal contact is possible due to certain reasons. This happens when i) a ... which is responsible for this kind of adsorption is Oiliness.   Diagram 

Define lubricant. Give the classification of lubricants with at least one example of each type.

Description : Define lubricant. Give the classification of lubricants with at least one example of each type.

Last Answer : Lubricant: Any substance introduced between two moving or sliding surface to reduce the frictional resistance between them is known as lubricant. Classification: i) Solid lubricants: Examples: graphite, ... acids like oleic acid, Stearic acid etc., silicones, blended oils, and mineral oils.

Describe sacrificial anodic protection with neat diagram.

Description : Describe sacrificial anodic protection with neat diagram.

Last Answer : Method: The metallic structure to be protected from corrosion is connected to anodic metal (upper placed in galvanic series) by an insulated wire. Thus externally added metal like Zn, Al, Mg, etc ... hot water tanks to prevent corrosion. The protection of underground pipelines is shown in Fig.

Name and describe the method used for coating large and irregularly shaped articles for prevention of corrosion.

Description : Name and describe the method used for coating large and irregularly shaped articles for prevention of corrosion.

Last Answer : Metal spraying is the method used for coating large and irregularly shaped articles for prevention of corrosion. Diagram: Process:- In this method ,coating metal sprayed on the surface of ... . The molten metal then sprayed on the surface of base metal with the help of compressed air.

Explain the mechanism of oxidation corrosion

Description : Explain the mechanism of oxidation corrosion

Last Answer : The electrons are transferred from metal atom to oxygen. Metal loses electron while oxygen accepts electron forms their respective ions these two types of ion combine together to from metal oxide. 

Explain the significance of proximate analysis.

Description : Explain the significance of proximate analysis. 

Last Answer : Significance: Proximate analysis provides following valuable information in assessing the quality of fuel i) Moisture: - Lesser the moisture better is the quality of coal. ii) Volatile Matter: - Lower / ... iv) Fixed Carbon: - Higher the percentage of fixed carbon, greater is the calorific value.

Distinguish between hardening and normalising.

Description : Distinguish between hardening and normalising.

Last Answer : Hardening Normalizing 1. It is the process of heating steel at high temperature (800-9000C) and then suddenly cooled by dipping or quenching in some suitable medium. 1. It is the ... hardening. 6. It creates stresses in structure 6. It removes coarser grained structure.

Give the classification of plain carbon steel. Write composition, one property and one use of different plain carbon steel.

Description : Give the classification of plain carbon steel. Write composition, one property and one use of different plain carbon steel.

Last Answer : Classification: a) Mild or low carbon steel - 0.05 to 0.3% carbon b) Medium carbon steel - 0.3 to 0.6% carbon c) High carbon steel - 0.6 to 1.5% carbon ... Wooden working tools, chisels, saws, drills, metal cutting tools for lathes, cutters, knives, blades, razors etc.

Write chemical reactions taking place in zone of reduction of blast furnace.

Description : Write chemical reactions taking place in zone of reduction of blast furnace.

Last Answer : Write chemical reactions taking place in zone of reduction of blast furnace.

Define cloud point and viscosity index of a lubricant

Description : Define cloud point and viscosity index of a lubricant

Last Answer : Cloud point: Cloud point indicates the temperature at which the oil becomes cloudy in appearance, due to separation of wax. Viscosity Index: The rate of change of viscosity of a liquid (Oil) with the change of temperature is known as viscosity index.

Distinguish between solid fuel and liquid fuel.

Description : Distinguish between solid fuel and liquid fuel.

Last Answer : Property Solid Liquid 1.Calorific Value Low Higher 2.Ignition Temperature  Very high Moderate 3.Cost  Cheap Costly 4.Ash content High Negligible 5.Velocity of combustion Non controllable Easily Controllable

Define calorific value & ignition temperature

Description : Define calorific value & ignition temperature 

Last Answer : Calorific value: - It is defined as “the total amount of heat produced by the complete combustion of unit mass or unit volume of the fuel.” Ignition temperature:-It is the minimum temperature at which combustion of a fuel takes place when the firing is once started.

List any four constituents of paint.

Description : List any four constituents of paint. 

Last Answer : 1) Pigments 2) Drying Oil / Medium 3) Thinners 4) Driers5) Extenders 6) Plasticizers

Name any four factors affecting electrochemical corrosion.

Description : Name any four factors affecting electrochemical corrosion.

Last Answer : A) Nature of metal:  1) Position of metal in a galvanic series: A metal having higher position in a galvanic series has more chemical reactivity and therefore, it gets attacked by gaseous and ... as a conducting medium and promotes corrosion. e.g:- Rusting of Fe is promoted in humid atmosphere.

What is the effect of alloying element Cr & V on the properties of steel?

Description : What is the effect of alloying element Cr & V on the properties of steel?

Last Answer : Effect of alloying element Cr:- i) It increases hardness, toughness and tensile strength. ii) It increases wear resistance and resistance to corrosion. Effect of alloying element V:  ... tensile strength, ductility and shock resistance. ii) It increases air hardening and cutting quality.

For given applied voltage, with the increase in frequency of the applied voltage?

Description : For given applied voltage, with the increase in frequency of the applied voltage?

Last Answer : For given applied voltage, with the increase in frequency of the applied voltage eddy current loss will remain unchanged.

Write two ores of iron with chemical formula.

Description : Write two ores of iron with chemical formula.

Last Answer : 1) Magnetite - Fe₃O₄  2) Haematite - Fe₂O₃ 3) Limonite - 2 Fe₂O₃.3H₂O 4) Iron Pyrites - FeS₂ 5) Siderite - FeCO₃ 

At a site, low grade copper ores are available and zinc and iron seraps are also available. Which of the two seraps will be more suitable for reducing the leached copper ore and why ?

Description : At a site, low grade copper ores are available and zinc and iron seraps are also available. Which of the two seraps will be more suitable for reducing the leached copper ore and why ?

Last Answer : Ans. : The E0 value for the redox couple Zn2+/ Zn(-0.76V) is more negative than that of Fe2+/ Fe(- 0.44) redox couple. Therefore, Zinc is more reactive than iron and hence reduction will ... Zinc seraps are used, But Zinc is a costier metal than iron so using iron scraps would be more economical.

Which of the following ores does not contain iron? (1) Haematite (2) Magnetite (3) Limonite (4) Cassiterite

Description : Which of the following ores does not contain iron? (1) Haematite (2) Magnetite (3) Limonite (4) Cassiterite

Last Answer : (4) Cassiterite

Which of the following is the primary reason for adding calcium carbonate to the reduction process of iron oxide ores ? The calcium carbonate: w) acts as an oxidizing agent x) removes silicate waste products y) acts as a reducing agent z) removes sulfur waste products

Description : Which of the following is the primary reason for adding calcium carbonate to the reduction process of iron oxide ores ? The calcium carbonate: w) acts as an oxidizing agent x) removes silicate waste products y) acts as a reducing agent z) removes sulfur waste products

Last Answer : ANSWER: X -- REMOVES SILICATE WASTE PRODUCTS

Among the following iron ores, the highest percentage of iron content is found in— (1) Haemetite (2) Magnetite (3) Limnonite (4) None of these

Description : Among the following iron ores, the highest percentage of iron content is found in— (1) Haemetite (2) Magnetite (3) Limnonite (4) None of these

Last Answer : Haemetite

The commodity which accounts for the maximum volume of goods transported by the railways in India is (a) iron and steel (b) coal (c) mineral oil (d) metallic ores (other than iron ore)

Description : The commodity which accounts for the maximum volume of goods transported by the railways in India is (a) iron and steel (b) coal (c) mineral oil (d) metallic ores (other than iron ore)

Last Answer : Ans: (b)

Froth floatation is the most suitable for treating (A) Iron ores (B) Sulphide ores (C) Quartzite (D) None of these

Description : Froth floatation is the most suitable for treating (A) Iron ores (B) Sulphide ores (C) Quartzite (D) None of these

Last Answer : (B) Sulphide ores

Stamp mills are generally used for crushing (A) Iron ores (B) Gold ores (C) Talc (D) Diamond

Description : Stamp mills are generally used for crushing (A) Iron ores (B) Gold ores (C) Talc (D) Diamond

Last Answer : (B) Gold ores

If the ore impurities is (A) Clay, lime stone is used as flux (B) Lime stone, clay is used as flux (C) Quartz, lime stone and argillaceous iron ores are used as flux (D) All the above

Description : If the ore impurities is (A) Clay, lime stone is used as flux (B) Lime stone, clay is used as flux (C) Quartz, lime stone and argillaceous iron ores are used as flux (D) All the above

Last Answer : Answer: Option D

The operation of removal of impurities or clay adhering to iron ores, is known as (A) Dressing (B) Calcination (C) Roasting (D) Smelti

Description : The operation of removal of impurities or clay adhering to iron ores, is known as (A) Dressing (B) Calcination (C) Roasting (D) Smelti

Last Answer : Answer: Option A

Pig iron is manufactured from the ores by (A) Dressing (B) Calcination and roasting (C) Smelting (D) All the above

Description : Pig iron is manufactured from the ores by (A) Dressing (B) Calcination and roasting (C) Smelting (D) All the above

Last Answer : Answer: Option D

Pig iron made from haematite ores free from sulphur, phosphorus and copper, is known as (A) Bessemer pig (B) Grey or foundry pig (C) White or forge pig (D) Mottled pig

Description : Pig iron made from haematite ores free from sulphur, phosphorus and copper, is known as (A) Bessemer pig (B) Grey or foundry pig (C) White or forge pig (D) Mottled pig

Last Answer : Answer: Option A

Calcination of iron ores is done (A) To remove moisture (B) To remove carbonic acid (C) By roasting in heaps (D) All the above

Description : Calcination of iron ores is done (A) To remove moisture (B) To remove carbonic acid (C) By roasting in heaps (D) All the above

Last Answer : Answer: Option D

Which ores are usually heavier ?

Description : Which ores are usually heavier ?

Last Answer : Oxide ores are usually heavier.

What types of Ores are roasted?

Description : What types of Ores are roasted? 

Last Answer : Ans. : Sulphides ores are roasted to convert them into their oxides since Oxides are more easily reduced to metal than sulphides.

How the most electropositive metals are isolated from their ores ?

Description : How the most electropositive metals are isolated from their ores ?

Last Answer : Ans. The most electropositive metals are isolated from their ores by electrolysis of fused ionic salts.

Impurities in metal ores are called: w) flux x) gangue (pron: gang) y) slag z) sediments

Description : Impurities in metal ores are called: w) flux x) gangue (pron: gang) y) slag z) sediments

Last Answer : ANSWER: X -- GANGUE

Metallic elements are often obtained from ores. Name the metallic element which is produced from the ore Bauxite.

Description : Metallic elements are often obtained from ores. Name the metallic element which is produced from the ore Bauxite.  

Last Answer : ANSWER: ALUMINUM

The study of metals and the overall process by which metals are extracted from its ores are called?

Description : The study of metals and the overall process by which metals are extracted from its ores are called?

Last Answer : Metallurgy

Which of the following operations does not involve leaching? (A) Dissolving gold from ores (B) Dissolving pharmaceutical products from bark or roots (C) Dissolving sugar from the cells of the beet (D) Removing nicotine from its water solution by kerosene

Description : Which of the following operations does not involve leaching? (A) Dissolving gold from ores (B) Dissolving pharmaceutical products from bark or roots (C) Dissolving sugar from the cells of the beet (D) Removing nicotine from its water solution by kerosene

Last Answer : (D) Removing nicotine from its water solution by kerosene

Amongst the various ores of a metal (M) (sulphide, carbonates, oxides, hydrated or hydroxides) two ores [X] and [Y] show the following reactivity. (i)

Description : Amongst the various ores of a metal (M) (sulphide, carbonates, oxides, hydrated or hydroxides) two ores [X] and [Y] show the following reactivity. (i)

Last Answer : Amongst the various ores of a metal (M) (sulphide, carbonates, oxides, hydrated or hydroxides) ... and hydroxide ores D. Carbonate and oxide ores

Two ores A1 and A2 of a metal M show the following reactivity: `A_(1)=CuCo_(3).Cu(OH)_(3),S=Cu` `P=Cu_(2)I_(2): G=SO_(2)` . Then `A_(2)` is

Description : Two ores A1 and A2 of a metal M show the following reactivity: `A_(1)=CuCo_(3).Cu(OH)_(3),S=Cu` `P=Cu_(2)I_(2): G=SO_(2)` . Then `A_(2)` is

Last Answer : Two ores A1 and A2 of a metal M show the following reactivity: `A_(1)=CuCo_(3).Cu(OH)_(3),S=Cu` `P=Cu_(2) ... )` B. `CuO` C. `CuCO_(3)` D. `Cu_(2)S`

Name two ores of Aluminum with chemical formulae.

Description : Name two ores of Aluminum with chemical formulae.

Last Answer : Ores of Aluminum:(Any two) i) Bauxite - Al2O3 .2H2O. ii) Corundum- Al2O3, iii) Feldspar - KAlSi3O8, iv) Mica - [KAlSi2O10(OH)2] v) Cryolite - Na3AlF6 vi) Alunite ( Alumstone)- K2SO4 .Al2(SO4)3 .4Al(OH)3

What are ores? Give example. What are ‘placer deposits’? Give example of mineral found in such deposits. -Geography

Description : What are ores? Give example. What are ‘placer deposits’? Give example of mineral found in such deposits. -Geography

Last Answer : The term Ores' is referred to the gathering of such minerals which are mixed with other elements. To make its extraction sodium salt, the mineral content should be in sufficient concentration of the ore ... and the base of hills. Minerals found in such deposits are Gold, Silver, Tin and Platinum.

What are ores? Give example. -SST 10th

Description : What are ores? Give example. -SST 10th

Last Answer : (i) The term ore is used to describe an accumulation of any mineral mixed with other elements. Minerals are usually found in ores. Metals are extracted from the ores after removing the impurities ... . Gold, silver, tin and platinum are examples of some important minerals found in placer deposits'