Define cloud point and viscosity index of a lubricant

Define cloud point and viscosity index of a lubricant
by

1 Answer

Answer :

Cloud point: Cloud point indicates the temperature at which the oil becomes cloudy in appearance, due to separation of wax.

Viscosity Index: The rate of change of viscosity of a liquid (Oil) with the change of temperature is known as viscosity index.
by

Related questions

Define lubricant. Give the classification of lubricants with at least one example of each type.

Description : Define lubricant. Give the classification of lubricants with at least one example of each type.

Last Answer : Lubricant: Any substance introduced between two moving or sliding surface to reduce the frictional resistance between them is known as lubricant. Classification: i) Solid lubricants: Examples: graphite, ... acids like oleic acid, Stearic acid etc., silicones, blended oils, and mineral oils.

Suggest the type of lubricant used for the following jobs: i) Clock ii) I.C. Engines iii) Gears iv) Sewing machine

Description : Suggest the type of lubricant used for the following jobs: i) Clock ii) I.C. Engines iii) Gears iv) Sewing machine

Last Answer : i) Clock : Vegetable and animal oils like palm oil, hazel nut oil, neat foot oil, etc ii) I.C. Engines: Mineral oils containing additives are used. iii) Gears: Thick mineral oils containing ... Mineral oil, silicones, thin vegetable and animal oils like palm oil, hazel nut oil, neat foot oil.

Define fuel. Give the classification of fuel based on their occurrence with two examples of each type.

Description : Define fuel. Give the classification of fuel based on their occurrence with two examples of each type.

Last Answer : Fuel: A fuel can be defined as any combustible substance which during combustion gives large amount of heat energy.  Classification of Fuel : I) Primary or Natural Physical State i) Solid - e.g wood ... diesel oil, lubricating oil iii)Gaseous- e.g LPG, water gas ,producer gas ,coal gas, biogas

Define calorific value & ignition temperature

Description : Define calorific value & ignition temperature 

Last Answer : Calorific value: - It is defined as “the total amount of heat produced by the complete combustion of unit mass or unit volume of the fuel.” Ignition temperature:-It is the minimum temperature at which combustion of a fuel takes place when the firing is once started.

Define Cementation. Name its types.

Description : Define Cementation. Name its types.

Last Answer : Cementation: It is the process of heating the base metal in a revolving drum containing a powder of coating metal. Types: i) Sherardizing ii) Chromizing iii) Colorizing

Define heat treatment. Give any two purposes of heat treatment.

Description : Define heat treatment. Give any two purposes of heat treatment.

Last Answer : Heat treatment:- The process of heating steel to a certain high temperature and then cooling it at a controlled rate in order to develop certain physical properties without changing its chemical composition ... 7) To remove trapped gases. 8) To improve machinability and mechanical properties.

What is used as a photocatalyst? a) Titanium dioxide b) Lead chromate c) Cobalt pigments d) Iron oxide

Description : What is used as a photocatalyst? a) Titanium dioxide b) Lead chromate c) Cobalt pigments d) Iron oxide

Last Answer : a) Titanium dioxide

Which raw material is used to impart colour to the glass? a) Al2O3 b) CoO c) CaO d) MgO

Description : Which raw material is used to impart colour to the glass? a) Al2O3 b) CoO c) CaO d) MgO

Last Answer : b) CoO

Explain boundary lubrication with diagram.

Description : Explain boundary lubrication with diagram.

Last Answer : Boundary lubrication: This type of lubrication is done when a continuous fluid film of lubricant cannot persist & direct metal to metal contact is possible due to certain reasons. This happens when i) a ... which is responsible for this kind of adsorption is Oiliness.   Diagram 

Describe sacrificial anodic protection with neat diagram.

Description : Describe sacrificial anodic protection with neat diagram.

Last Answer : Method: The metallic structure to be protected from corrosion is connected to anodic metal (upper placed in galvanic series) by an insulated wire. Thus externally added metal like Zn, Al, Mg, etc ... hot water tanks to prevent corrosion. The protection of underground pipelines is shown in Fig.

Name and describe the method used for coating large and irregularly shaped articles for prevention of corrosion.

Description : Name and describe the method used for coating large and irregularly shaped articles for prevention of corrosion.

Last Answer : Metal spraying is the method used for coating large and irregularly shaped articles for prevention of corrosion. Diagram: Process:- In this method ,coating metal sprayed on the surface of ... . The molten metal then sprayed on the surface of base metal with the help of compressed air.

Explain the mechanism of oxidation corrosion

Description : Explain the mechanism of oxidation corrosion

Last Answer : The electrons are transferred from metal atom to oxygen. Metal loses electron while oxygen accepts electron forms their respective ions these two types of ion combine together to from metal oxide. 

Write composition, 2 properties and two uses of CNG.

Description : Write composition, 2 properties and two uses of CNG.

Last Answer : Properties: - 1) It is cheaper than petrol or diesel. 2) Its ignition temp is high (5400C). 3) It is odorless & non corrosive. 4) It is light weight gas. 5) ... petrol / CNG) 2) It is also used in locomotive generators to generate electricity that drives the motors of the train.

Explain the significance of proximate analysis.

Description : Explain the significance of proximate analysis. 

Last Answer : Significance: Proximate analysis provides following valuable information in assessing the quality of fuel i) Moisture: - Lesser the moisture better is the quality of coal. ii) Volatile Matter: - Lower / ... iv) Fixed Carbon: - Higher the percentage of fixed carbon, greater is the calorific value.

Distinguish between hardening and normalising.

Description : Distinguish between hardening and normalising.

Last Answer : Hardening Normalizing 1. It is the process of heating steel at high temperature (800-9000C) and then suddenly cooled by dipping or quenching in some suitable medium. 1. It is the ... hardening. 6. It creates stresses in structure 6. It removes coarser grained structure.

Give the classification of plain carbon steel. Write composition, one property and one use of different plain carbon steel.

Description : Give the classification of plain carbon steel. Write composition, one property and one use of different plain carbon steel.

Last Answer : Classification: a) Mild or low carbon steel - 0.05 to 0.3% carbon b) Medium carbon steel - 0.3 to 0.6% carbon c) High carbon steel - 0.6 to 1.5% carbon ... Wooden working tools, chisels, saws, drills, metal cutting tools for lathes, cutters, knives, blades, razors etc.

Write chemical reactions taking place in zone of reduction of blast furnace.

Description : Write chemical reactions taking place in zone of reduction of blast furnace.

Last Answer : Write chemical reactions taking place in zone of reduction of blast furnace.

Distinguish between solid fuel and liquid fuel.

Description : Distinguish between solid fuel and liquid fuel.

Last Answer : Property Solid Liquid 1.Calorific Value Low Higher 2.Ignition Temperature  Very high Moderate 3.Cost  Cheap Costly 4.Ash content High Negligible 5.Velocity of combustion Non controllable Easily Controllable

Give two applications of biodiesel.

Description : Give two applications of biodiesel.

Last Answer : 1) It is an alternative fuel formulated exclusively for diesel engines with little or no modification in engines. 2) It is also used as a heating fuel in domestic & commercial boilers. 3) It is used in rockets.

List any four constituents of paint.

Description : List any four constituents of paint. 

Last Answer : 1) Pigments 2) Drying Oil / Medium 3) Thinners 4) Driers5) Extenders 6) Plasticizers

Name any four factors affecting electrochemical corrosion.

Description : Name any four factors affecting electrochemical corrosion.

Last Answer : A) Nature of metal:  1) Position of metal in a galvanic series: A metal having higher position in a galvanic series has more chemical reactivity and therefore, it gets attacked by gaseous and ... as a conducting medium and promotes corrosion. e.g:- Rusting of Fe is promoted in humid atmosphere.

What is the effect of alloying element Cr & V on the properties of steel?

Description : What is the effect of alloying element Cr & V on the properties of steel?

Last Answer : Effect of alloying element Cr:- i) It increases hardness, toughness and tensile strength. ii) It increases wear resistance and resistance to corrosion. Effect of alloying element V:  ... tensile strength, ductility and shock resistance. ii) It increases air hardening and cutting quality.

State any two functions of Blast furnace.

Description : State any two functions of Blast furnace.

Last Answer : 1. To reduce the ore to metallic. 2. To remove the impurities in the form of slag.

Name two important ores of iron? Mention its formula.

Description : Name two important ores of iron? Mention its formula.

Last Answer : Name two important ores of iron? Mention its formula.

For given applied voltage, with the increase in frequency of the applied voltage?

Description : For given applied voltage, with the increase in frequency of the applied voltage?

Last Answer : For given applied voltage, with the increase in frequency of the applied voltage eddy current loss will remain unchanged.

A good lubricant should have high (A) Viscosity index (B) Volatility (C) Pour point (D) None of these

Description : A good lubricant should have high (A) Viscosity index (B) Volatility (C) Pour point (D) None of these

Last Answer : (A) Viscosity index

Viscosity index improver (like polystyrene or polyisobutylene) is added to lubricant to (A) Reduce its viscosity (B) Increase its viscosity (C) Reduce the variation in its viscosity with temperature(D) Increase the variation in its viscosity with temperature

Description : Viscosity index improver (like polystyrene or polyisobutylene) is added to lubricant to (A) Reduce its viscosity (B) Increase its viscosity (C) Reduce the variation in its viscosity with temperature (D) Increase the variation in its viscosity with temperature

Last Answer : (C) Reduce the variation in its viscosity with temperature

In cold countries ethylene glycol is added to water in car radiators. This helps to (a) Reduce the viscosity (b) Make water a better lubricant (c) Lower the freezing point (d) Lower the boiling poin

Description : In cold countries ethylene glycol is added to water in car radiators. This helps to (a) Reduce the viscosity (b) Make water a better lubricant (c) Lower the freezing point (d) Lower the boiling poin

Last Answer : Lower the freezing point

Satisfactory hydrodynamic film in a journal bearing is formed when (a) Journal speed is low; unit pressure on the bearing is high and viscosity of lubricant used is low [IES-2006] (b) Journal speed is low; unit pressure on the bearing is low and viscosity of lubricant used is low (c) Journal speed is high; unit pressure on the bearing is high and viscosity of lubricant used is high (d) Appropriate combination of journal speed, unit pressure on bearing and lubricant viscosity exists resulting in low coefficient of friction

Description : Satisfactory hydrodynamic film in a journal bearing is formed when (a) Journal speed is low; unit pressure on the bearing is high and viscosity of lubricant used is low [IES-2006] ... journal speed, unit pressure on bearing and lubricant viscosity exists resulting in low coefficient of friction

Last Answer : (c) Journal speed is high; unit pressure on the bearing is high and viscosity of lubricant used is high

Consider the following statements: [IES 2007] For a journal rotating in a bearing under film lubrication conditions, the frictional resistance is- 1. Proportional to the area of contact 2. Proportional to the viscosity of lubricant 3. Proportional to the speed of rotation 4. Independent of the pressure Which of the statements given above are correct? (a) 1, 2, 3 and 4 (b) 1 and 4 only (c) 2, 3 and 4 only (d) 2 and 3 only

Description : Consider the following statements: [IES 2007] For a journal rotating in a bearing under film lubrication conditions, the frictional resistance is- 1. Proportional to the area of contact 2. Proportional to the viscosity of lubricant 3. ... 4 (b) 1 and 4 only (c) 2, 3 and 4 only (d) 2 and 3 only

Last Answer : (a) 1, 2, 3 and 4

In a journal bearings, the radius of the friction circle increases with the increase in- [IES-1997] (a) Load (b) Radius of the journal (c) Speed of the journal (d) Viscosity of the lubricant

Description : In a journal bearings, the radius of the friction circle increases with the increase in- [IES-1997] (a) Load (b) Radius of the journal (c) Speed of the journal (d) Viscosity of the lubricant

Last Answer : (b) Radius of the journal

A lubricant 100 times more viscous than water would have a viscosity (in Pa.s) (A) 0.01 (B) 0.1 (C) 1 (D) 10

Description : A lubricant 100 times more viscous than water would have a viscosity (in Pa.s) (A) 0.01 (B) 0.1 (C) 1 (D) 10

Last Answer : (B) 0.1

Which one is preferred for aircraft engine? (A) High viscosity index lube oil (B) Low viscosity index lube oil (C) High freezing point aviation fuel (D) None of these

Description : Which one is preferred for aircraft engine? (A) High viscosity index lube oil (B) Low viscosity index lube oil (C) High freezing point aviation fuel (D) None of these

Last Answer : (A) High viscosity index lube oil

Hydrofining is the most recent and effective method for the (A) Removal of sulphur (B) Improvement of smoke point (C) Reduction of breathing loss (D) Improvement of viscosity index

Description : Hydrofining is the most recent and effective method for the (A) Removal of sulphur (B) Improvement of smoke point (C) Reduction of breathing loss (D) Improvement of viscosity index

Last Answer : (A) Removal of sulphur

Viscosity index of a lubricating oil (A) Is the measure of its flash point (B) Is the measure of variation of viscosity with temperature (C) Should be low (D) None of these

Description : Viscosity index of a lubricating oil (A) Is the measure of its flash point (B) Is the measure of variation of viscosity with temperature (C) Should be low (D) None of these

Last Answer : (B) Is the measure of variation of viscosity with temperature

A multigrade lubricating oil means an oil having high (A) Viscosity index (B) Viscosity (C) Aniline point (D) Flash point

Description : A multigrade lubricating oil means an oil having high (A) Viscosity index (B) Viscosity (C) Aniline point (D) Flash point

Last Answer : (A) Viscosity index

Presence of predominantly large quantity of aromatics (polynuclear) is not desirable in aviation fuel, because it has (A) High pour point and low smoke point (B) Low viscosity index (C) High self-ignition temperature (D) All (A), (B) and (C)

Description : Presence of predominantly large quantity of aromatics (polynuclear) is not desirable in aviation fuel, because it has (A) High pour point and low smoke point (B) Low viscosity index (C) High self-ignition temperature (D) All (A), (B) and (C)

Last Answer : (B) Low viscosity index

Paraffins are desirable in lubricating oil, as it has got high (A) Viscosity (B) Viscosity index (C) Smoke point (D) Pour poin

Description : Paraffins are desirable in lubricating oil, as it has got high (A) Viscosity (B) Viscosity index (C) Smoke point (D) Pour poin

Last Answer : (C) Smoke point

The intensive properties are (A) Molar volume, density, viscosity and boiling point (B) Refractive index and surface tension (C) Both (A) and (B) (D) None of these

Description : The intensive properties are (A) Molar volume, density, viscosity and boiling point (B) Refractive index and surface tension (C) Both (A) and (B) (D) None of these

Last Answer : (C) Both (A) and (B)

Which of the following is used as lubricant? (1) Graphite (2) Silica (3) Diamond (4) Iron Oxide

Description : Which of the following is used as lubricant? (1) Graphite (2) Silica (3) Diamond (4) Iron Oxide

Last Answer : (1) Graphite Explanation: Graphite is used as a lubricant due to its slippery nature. Due to its loosely intact carbon atoms or free electrons, they can move around easily from one place to another, making graphite a good conductor of electricity.

In Nuclear reactors graphite is used as (1) Lubricant (2) Fuel (3) Linear of the reactor (4) Modulator

Description : In Nuclear reactors graphite is used as (1) Lubricant (2) Fuel (3) Linear of the reactor (4) Modulator

Last Answer : (4) Modulator Explanation: Nuclear reactors are used at nuclear power plants for electricity generation. These are generally graphite moderated and CO2 cooled.

Which of the following is used as lubricant? (1) Graphite (2) Silica (3) Diamond (4) Iron Oxide

Description : Which of the following is used as lubricant? (1) Graphite (2) Silica (3) Diamond (4) Iron Oxide

Last Answer : (1) Graphite Explanation: Graphite is used as a lubricant due to its slippery nature. Due to its loosely intact carbon atoms or free electrons, they can move around easily from one place to another, making graphite a good conductor of electricity.

Which of the following is used as a lubricant in heavy machines? (1) Bauxite (2) Sulphur (3) Phosphorus (4) Graphite

Description : Which of the following is used as a lubricant in heavy machines? (1) Bauxite (2) Sulphur (3) Phosphorus (4) Graphite

Last Answer : (4) Graphite Explanation: Graphite is used as a lubricant in heavy machines. it is made of carbon atoms arranged in sheets of hexagonal units - looks a lot like chicken-wire. Another sheet forms on ... ) between the sheets, so they are able to slide freely over each other without breaking any bonds.

In nuclear reactors, graphite is used as a/an – (1) fuel (2) lubricant (3) moderator (4) insulator

Description : In nuclear reactors, graphite is used as a/an – (1) fuel (2) lubricant (3) moderator (4) insulator

Last Answer : (3) moderator Explanation: A nuclear reactor is a device to initiate and control a sustained nuclear chain reaction. Most commonly they are used for generating electricity and for the ... turning them into thermal neutrons capable of sustaining a nuclear chain reaction involving uranium-235.

What form of carbon is useful as a lubricant?

Description : What form of carbon is useful as a lubricant? 

Last Answer : ANSWER: GRAPHITE

In nuclear reactors, graphite is used as a/an (1) fuel (2) lubricant (3) moderator(4) insulator

Description : In nuclear reactors, graphite is used as a/an (1) fuel (2) lubricant (3) moderator(4) insulator

Last Answer : moderator

Which of the following is used as a lubricant in heavy machines? (1) Bauxite (2) Sulphur (3) Phosphorus (4) Graphite

Description : Which of the following is used as a lubricant in heavy machines? (1) Bauxite (2) Sulphur (3) Phosphorus (4) Graphite

Last Answer : Graphite

. Pick out the wrong statement. (A) Multigrade lubricating oils have high viscosity index (B) Paraffinic oil has very high viscosity index (C) Naphthenic oil has very low viscosity index (D) High viscosity index means a large change in viscosity with change in temperature

Description : . Pick out the wrong statement. (A) Multigrade lubricating oils have high viscosity index (B) Paraffinic oil has very high viscosity index (C) Naphthenic oil has very low viscosity index (D) High viscosity index means a large change in viscosity with change in temperature

Last Answer : (D) High viscosity index means a large change in viscosity with change in temperature

Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Description : Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Last Answer : (A) Higher yield of straight run gasoline