Which raw material is used to impart colour to the glass? a) Al2O3 b) CoO c) CaO d) MgO

Which raw material is used to impart colour to the glass?
 a) Al2O3
 b) CoO
 c) CaO
 d) MgO
by

1 Answer

Answer :

b) CoO
by

Related questions

Cement mainly contains (A) CaO, SiO2 , Al2O3 (B) MgO, SiO2 , K2O (C) Al2O3 , MgO, Fe2O3 (D) CaO, MgO, K2O

Description : Cement mainly contains (A) CaO, SiO2 , Al2O3 (B) MgO, SiO2 , K2O (C) Al2O3 , MgO, Fe2O3 (D) CaO, MgO, K2O

Last Answer : (A) CaO, SiO2 , Al2O3

The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All the above

Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All the above

Last Answer : Answer: Option D

The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All these

Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All these

Last Answer : Answer: Option D

(3) preventing rapid setting of cement Explanation: Portland cement clinker is a hydraulic material which shall consist of at least two-thirds by mass of calcium silicates, the remainder consisting of aluminium- and ironcontaining clinker phases and other compounds. The ratio of CaO to SiO2 shall not be less than 2.0. The magnesium oxide content (MgO) shall not exceed 5.0% by mass. Cement sets when mixed with water by way of a complex series of chemical reactions still only partly understood.

Description : (3) preventing rapid setting of cement Explanation: Portland cement clinker is a hydraulic material which shall consist of at least two-thirds by mass of calcium silicates, the remainder consisting of ... mixed with water by way of a complex series of chemical reactions still only partly understood.

Last Answer : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved

What is used as a photocatalyst? a) Titanium dioxide b) Lead chromate c) Cobalt pigments d) Iron oxide

Description : What is used as a photocatalyst? a) Titanium dioxide b) Lead chromate c) Cobalt pigments d) Iron oxide

Last Answer : a) Titanium dioxide

Suggest the type of lubricant used for the following jobs: i) Clock ii) I.C. Engines iii) Gears iv) Sewing machine

Description : Suggest the type of lubricant used for the following jobs: i) Clock ii) I.C. Engines iii) Gears iv) Sewing machine

Last Answer : i) Clock : Vegetable and animal oils like palm oil, hazel nut oil, neat foot oil, etc ii) I.C. Engines: Mineral oils containing additives are used. iii) Gears: Thick mineral oils containing ... Mineral oil, silicones, thin vegetable and animal oils like palm oil, hazel nut oil, neat foot oil.

Explain boundary lubrication with diagram.

Description : Explain boundary lubrication with diagram.

Last Answer : Boundary lubrication: This type of lubrication is done when a continuous fluid film of lubricant cannot persist & direct metal to metal contact is possible due to certain reasons. This happens when i) a ... which is responsible for this kind of adsorption is Oiliness.   Diagram 

Define lubricant. Give the classification of lubricants with at least one example of each type.

Description : Define lubricant. Give the classification of lubricants with at least one example of each type.

Last Answer : Lubricant: Any substance introduced between two moving or sliding surface to reduce the frictional resistance between them is known as lubricant. Classification: i) Solid lubricants: Examples: graphite, ... acids like oleic acid, Stearic acid etc., silicones, blended oils, and mineral oils.

Describe sacrificial anodic protection with neat diagram.

Description : Describe sacrificial anodic protection with neat diagram.

Last Answer : Method: The metallic structure to be protected from corrosion is connected to anodic metal (upper placed in galvanic series) by an insulated wire. Thus externally added metal like Zn, Al, Mg, etc ... hot water tanks to prevent corrosion. The protection of underground pipelines is shown in Fig.

Name and describe the method used for coating large and irregularly shaped articles for prevention of corrosion.

Description : Name and describe the method used for coating large and irregularly shaped articles for prevention of corrosion.

Last Answer : Metal spraying is the method used for coating large and irregularly shaped articles for prevention of corrosion. Diagram: Process:- In this method ,coating metal sprayed on the surface of ... . The molten metal then sprayed on the surface of base metal with the help of compressed air.

Explain the mechanism of oxidation corrosion

Description : Explain the mechanism of oxidation corrosion

Last Answer : The electrons are transferred from metal atom to oxygen. Metal loses electron while oxygen accepts electron forms their respective ions these two types of ion combine together to from metal oxide. 

Write composition, 2 properties and two uses of CNG.

Description : Write composition, 2 properties and two uses of CNG.

Last Answer : Properties: - 1) It is cheaper than petrol or diesel. 2) Its ignition temp is high (5400C). 3) It is odorless & non corrosive. 4) It is light weight gas. 5) ... petrol / CNG) 2) It is also used in locomotive generators to generate electricity that drives the motors of the train.

Explain the significance of proximate analysis.

Description : Explain the significance of proximate analysis. 

Last Answer : Significance: Proximate analysis provides following valuable information in assessing the quality of fuel i) Moisture: - Lesser the moisture better is the quality of coal. ii) Volatile Matter: - Lower / ... iv) Fixed Carbon: - Higher the percentage of fixed carbon, greater is the calorific value.

Define fuel. Give the classification of fuel based on their occurrence with two examples of each type.

Description : Define fuel. Give the classification of fuel based on their occurrence with two examples of each type.

Last Answer : Fuel: A fuel can be defined as any combustible substance which during combustion gives large amount of heat energy.  Classification of Fuel : I) Primary or Natural Physical State i) Solid - e.g wood ... diesel oil, lubricating oil iii)Gaseous- e.g LPG, water gas ,producer gas ,coal gas, biogas

Distinguish between hardening and normalising.

Description : Distinguish between hardening and normalising.

Last Answer : Hardening Normalizing 1. It is the process of heating steel at high temperature (800-9000C) and then suddenly cooled by dipping or quenching in some suitable medium. 1. It is the ... hardening. 6. It creates stresses in structure 6. It removes coarser grained structure.

Give the classification of plain carbon steel. Write composition, one property and one use of different plain carbon steel.

Description : Give the classification of plain carbon steel. Write composition, one property and one use of different plain carbon steel.

Last Answer : Classification: a) Mild or low carbon steel - 0.05 to 0.3% carbon b) Medium carbon steel - 0.3 to 0.6% carbon c) High carbon steel - 0.6 to 1.5% carbon ... Wooden working tools, chisels, saws, drills, metal cutting tools for lathes, cutters, knives, blades, razors etc.

Write chemical reactions taking place in zone of reduction of blast furnace.

Description : Write chemical reactions taking place in zone of reduction of blast furnace.

Last Answer : Write chemical reactions taking place in zone of reduction of blast furnace.

Define cloud point and viscosity index of a lubricant

Description : Define cloud point and viscosity index of a lubricant

Last Answer : Cloud point: Cloud point indicates the temperature at which the oil becomes cloudy in appearance, due to separation of wax. Viscosity Index: The rate of change of viscosity of a liquid (Oil) with the change of temperature is known as viscosity index.

Distinguish between solid fuel and liquid fuel.

Description : Distinguish between solid fuel and liquid fuel.

Last Answer : Property Solid Liquid 1.Calorific Value Low Higher 2.Ignition Temperature  Very high Moderate 3.Cost  Cheap Costly 4.Ash content High Negligible 5.Velocity of combustion Non controllable Easily Controllable

Give two applications of biodiesel.

Description : Give two applications of biodiesel.

Last Answer : 1) It is an alternative fuel formulated exclusively for diesel engines with little or no modification in engines. 2) It is also used as a heating fuel in domestic & commercial boilers. 3) It is used in rockets.

Define calorific value & ignition temperature

Description : Define calorific value & ignition temperature 

Last Answer : Calorific value: - It is defined as “the total amount of heat produced by the complete combustion of unit mass or unit volume of the fuel.” Ignition temperature:-It is the minimum temperature at which combustion of a fuel takes place when the firing is once started.

List any four constituents of paint.

Description : List any four constituents of paint. 

Last Answer : 1) Pigments 2) Drying Oil / Medium 3) Thinners 4) Driers5) Extenders 6) Plasticizers

Define Cementation. Name its types.

Description : Define Cementation. Name its types.

Last Answer : Cementation: It is the process of heating the base metal in a revolving drum containing a powder of coating metal. Types: i) Sherardizing ii) Chromizing iii) Colorizing

Name any four factors affecting electrochemical corrosion.

Description : Name any four factors affecting electrochemical corrosion.

Last Answer : A) Nature of metal:  1) Position of metal in a galvanic series: A metal having higher position in a galvanic series has more chemical reactivity and therefore, it gets attacked by gaseous and ... as a conducting medium and promotes corrosion. e.g:- Rusting of Fe is promoted in humid atmosphere.

What is the effect of alloying element Cr & V on the properties of steel?

Description : What is the effect of alloying element Cr & V on the properties of steel?

Last Answer : Effect of alloying element Cr:- i) It increases hardness, toughness and tensile strength. ii) It increases wear resistance and resistance to corrosion. Effect of alloying element V:  ... tensile strength, ductility and shock resistance. ii) It increases air hardening and cutting quality.

Define heat treatment. Give any two purposes of heat treatment.

Description : Define heat treatment. Give any two purposes of heat treatment.

Last Answer : Heat treatment:- The process of heating steel to a certain high temperature and then cooling it at a controlled rate in order to develop certain physical properties without changing its chemical composition ... 7) To remove trapped gases. 8) To improve machinability and mechanical properties.

State any two functions of Blast furnace.

Description : State any two functions of Blast furnace.

Last Answer : 1. To reduce the ore to metallic. 2. To remove the impurities in the form of slag.

Name two important ores of iron? Mention its formula.

Description : Name two important ores of iron? Mention its formula.

Last Answer : Name two important ores of iron? Mention its formula.

For given applied voltage, with the increase in frequency of the applied voltage?

Description : For given applied voltage, with the increase in frequency of the applied voltage?

Last Answer : For given applied voltage, with the increase in frequency of the applied voltage eddy current loss will remain unchanged.

More than 95% of __________ is present in corundum. (A) SiO2 (B) Al2O3 (C) CaSiO2 (D) MgO

Description : More than 95% of __________ is present in corundum. (A) SiO2 (B) Al2O3 (C) CaSiO2 (D) MgO

Last Answer : B) Al2O3

Portland cement consists mainly of (A) CaO & SiO2 (B) SiO2 & Al2O3 (C) CaO & Al2O3 (D) CaO & Fe2O3

Description : Portland cement consists mainly of (A) CaO & SiO2 (B) SiO2 & Al2O3 (C) CaO & Al2O3 (D) CaO & Fe2O3

Last Answer : (A) CaO & SiO2

Which of the following is the second major component of cement? (A) Al2O3(B) SiO2(C) CaO(D) Fe2O3

Description : Which of the following is the second major component of cement? (A) Al2O3 (B) SiO2 (C) CaO (D) Fe2O3

Last Answer : (B) SiO2

How many of the following liberate `O_(2)` on heating in a dry test tube ? `CaO, Fe_(2)O_(3), Fe_(3)O_(4), FeO, Cr_(2)O_(3), XeF_(4), Al_(2)O_(3), MgO

Description : How many of the following liberate `O_(2)` on heating in a dry test tube ? `CaO, Fe_(2)O_(3), Fe_(3)O_(4), FeO, Cr_(2)O_(3), XeF_(4), Al_(2)O_(3), MgO

Last Answer : How many of the following liberate `O_(2)` on heating in a dry test tube ? `CaO, Fe_(2)O_(3), Fe_(3)O_(4), ... 3), XeF_(4), Al_(2)O_(3), MgO, Na_(2)O`

Which of the following is an acidic constituent of B.F. slag? (A) SiO2 (B) FeO (C) MgO (D) CaO

Description : Which of the following is an acidic constituent of B.F. slag? (A) SiO2 (B) FeO (C) MgO (D) CaO

Last Answer : Option A

Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Description : Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Last Answer : Option A

Blue colour is imparted to glass by the addition of (A) FeSO4 (B) PbO (C) CaO (D) NaOH

Description : Blue colour is imparted to glass by the addition of (A) FeSO4 (B) PbO (C) CaO (D) NaOH

Last Answer : (C) CaO

Consider the production of ammonia from methene and air as raw materials. The catalysts used are: (i) __________ for steam reforming of methane and (ii) __________ for ammonia synthesis. (A) (i) - Ni/Al2O3 ; (ii) - Cu - ZnO/Al2O3 (B) (i) - Fe/Al2O3 ; (ii) - Cu - ZnO/Al2O3 (C) (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3 (D) (i) - Fe/Al2O3 ; (ii) - Ni/Al2O3

Description : Consider the production of ammonia from methene and air as raw materials. The catalysts used are: (i) __________ for steam reforming of methane and (ii) __________ for ammonia synthesis. (A) (i) - Ni/Al2O3 ; (ii) - Cu - ZnO/ ... (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3 (D) (i) - Fe/Al2O3 ; (ii) - Ni/Al2O3

Last Answer : (C) (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3

Limestone addition in the blast furnace is done to flux __________ present in the raw materials. (A) SiO2 (B) Al2O3 (C) MnO2 (D) P

Description : Limestone addition in the blast furnace is done to flux __________ present in the raw materials. (A) SiO2 (B) Al2O3 (C) MnO2 (D) P

Last Answer : Limestone addition in the blast furnace is done to flux __________ present in the raw materials. (A) SiO2 (B) Al2O3 (C) MnO2 (D) P

Why Be and Mg do not impart colour to the flame ?

Description : Why Be and Mg do not impart colour to the flame ?

Last Answer : Ans : The electrons in beryllium and magnesium are too strongly bound to get excited by flame. Hence, these elements do not impart any colour to the flame.

Why Be and Mg do not impart colour to the flame ?

Description : Why Be and Mg do not impart colour to the flame ? 

Last Answer : The electrons in beryllium and magnesium are too strongly bound to get excited by flame. Hence, these elements do not impart any colour to the flame. 

The end bleaching agent used to move last traces of colour bodies from the pulp is (A) Chlorine dioxide (ClO2 ) (B) MgO (C) SO2 gas (D) Mercaptans

Description : The end bleaching agent used to move last traces of colour bodies from the pulp is (A) Chlorine dioxide (ClO2 ) (B) MgO (C) SO2 gas (D) Mercaptans

Last Answer : (A) Chlorine dioxide (ClO2 )

The main constituents of glass is (A) SiO2 (B) B2O3 (C) Al2O3 (D) Cr2O3

Description : The main constituents of glass is (A) SiO2 (B) B2O3 (C) Al2O3 (D) Cr2O3

Last Answer : (A) SiO2

How many of following metals impart a characteristic colour to the Bunsen flame ? `(i) Na " " (ii) Li " " (iii) K " " (iv) Ba` `(v) Sr " " (vi) Mg " "

Description : How many of following metals impart a characteristic colour to the Bunsen flame ? `(i) Na " " (ii) Li " " (iii) K " " (iv) Ba` `(v) Sr " " (vi) Mg " "

Last Answer : How many of following metals impart a characteristic colour to the Bunsen flame ? `(i) Na " " (ii) Li " " (iii) K ... ix) `Be " " (x )Ca " " (x i)Cu`

Antioxidants are added in petrol to (A) Impart colour to it, for easy identification (B) Minimise the gum formation (C) Prevent icing of the carburettor (D) Prevent the lead build up in engines

Description : Antioxidants are added in petrol to (A) Impart colour to it, for easy identification (B) Minimise the gum formation (C) Prevent icing of the carburettor (D) Prevent the lead build up in engines

Last Answer : (B) Minimise the gum formation

Co-efficient of thermal expansion of glass is decreased by the addition of __________ during its manufacture. (A) CaO (B) MnO2 (C) ZnO (D) FeS

Description : Co-efficient of thermal expansion of glass is decreased by the addition of __________ during its manufacture. (A) CaO (B) MnO2 (C) ZnO (D) FeS

Last Answer : (C) ZnO

Pick out the wrong statement. (A) Hard glass which is used for making laboratory glass wares is a mixture of sodium borosilicate and aluminium borosilicate (B) Glass is decolorized during its manufacture by adding antimony oxide, manganese dioxide or arsenic oxide (C) Ordinary glass is represented chemically by Na2O . CaO . 6SiO2 (D) Red color is imparted to glass by addition of arsenic oxide

Description : Pick out the wrong statement. (A) Hard glass which is used for making laboratory glass wares is a mixture of sodium borosilicate and aluminium borosilicate (B) Glass is decolorized during its manufacture by ... Na2O . CaO . 6SiO2 (D) Red color is imparted to glass by addition of arsenic oxide

Last Answer : (D) Red color is imparted to glass by addition of arsenic oxide

Glass is (A) Mainly CaO (B) Subjected to galvanising (C) A super cooled liquid (D) All (A), (B) and (C)

Description : Glass is (A) Mainly CaO (B) Subjected to galvanising (C) A super cooled liquid (D) All (A), (B) and (C)

Last Answer : (C) A super cooled liquid

Coloured glass is obtained by mixing of colored salts. Addition of __________ oxide is done to impart greenish blue color to the glass. (A) Chromium (B) Arsenic (C) Copper (D) Manganese

Description : Coloured glass is obtained by mixing of colored salts. Addition of __________ oxide is done to impart greenish blue color to the glass. (A) Chromium (B) Arsenic (C) Copper (D) Manganese

Last Answer : (C) Copper

Sizing material is incorporated in paper to(A) Impart resistance to penetration by liquids(B) Increase its thickness(C) Increase its flexibility & opacity(D) Increase its brightness

Description : Sizing material is incorporated in paper to (A) Impart resistance to penetration by liquids (B) Increase its thickness (C) Increase its flexibility & opacity (D) Increase its brightness

Last Answer : (A) Impart resistance to penetration by liquids