Description : The stone ware sewers A. Are used for carrying sewage and drainage from houses B. Are manufactured from clays and shale C. After casting are dried and burnt at temperature 150°C, 700°C and 1200°C D. All the above
Last Answer : ANS: D
Description : To test chemical oxygen demand (C.O.D.) of sewage, organic matter is oxidised by potassium dichromate in the presence of A. Hydrochloric acid B. Sulphuric acid C. Nitric acid D. Citric acid
Last Answer : ANS: B
Description : The amount of oxygen consumed by the aerobic bacterias which cause the aerobic biological decomposition of sewage, is known A. Bio-Chemical Oxygen Demand (B.O.D.) B. Dissolved Oxygen (D.O.) C. Chemical Oxygen Demand (C.O.D.) D. None of these
Description : The grit chambers of sewage treatment plants, are generally cleaned after A. 2 days B. 7 days C. 12 days D. 14 days
Description : 3.0 ml of raw sewage is diluted to 300 ml. The D.O. concentration of the diluted sample at the beginning of the test was 8 mg/l. After 5 dayincubation at 20°C, the D.O. concentration was 5 mg/l. The BOD of raw sewerage is A. 100 mg/l B. 200 mg/l C. 300 mg/l D. 400 mg/l
Last Answer : ANS: C
Description : If the depletion of oxygen is found to be 2.5 mg/litre after incubating 2.5 ml of sewage diluted to 250 ml for 5 days at 20°C, B.O.D. of the sewage is A. 50 mg/l B. 100 mg/l C. 150 mg/l D. 250 mg/l
Description : If the depletion of oxygen is found to be 5 ppm after incubating a 2.5% solution of sewage sample for 5 days at 21°C, B.O.D. of the sewage is A. 50 ppm B. 100 ppm C. 150 ppm D. 200 ppm
Description : The sewer pipe which carries sewage from a building for immediate disposal is A. House sewer B. Lateral sewer C. Intercepting sewer D. Main sewer
Last Answer : ANS: A
Description : Aerobic activity is maximum A. In freshly produced sewage B. At sewer pipes C. In sewer treatment plants D. None of these
Description : The sewer which transports the sewage to the point of treatment, is called A. House sewer B. Out-fall sewer C. Branch sewer D. Main sewer
Description : The sewage discharge in a detritus tank of a treatment plant is 576 litres/sec with flow velocity of 0.2 m/sec. If the ratio of width to depth is 2, the depth is A. 100 cm B. 110 cm C. 120 cm D. 150 cm
Description : Q No: 291 The coagulant widely used for sewage treatment, is A. Alum B. Ferric chloride C. Ferric sulphate D. Chlorinated copperas
Description : The sewage treatment in septic tanks is due to A. Anaerobic decomposition B. Aerobic decomposition C. Parasitic decomposition D. None of these
Description : The design period of sewage treatment works in normally A. 5 – 10 years B. 15 – 20 years C. 30 – 40 years D. 40 – 50 years
Description : The spacing of bars of perforations of fine screens used for the treatment of sewage, is A. 2 to 3 mm B. 3 to 5 mm C. 5 to 8 mm D. 8 to 10 mm
Description : The spacing of bars for perforations in coarse screens used for the treatment of sewage, is A. 20 mm B. 30 mm C. 40 mm D. 50 mm
Description : In a grit chamber of a sewage treatment plant, A. Flow velocity 0.15 m to 0.3 m/sec is kept B. Depth of 0.9 m to 1.20 m is kept C. One minute of detention period is kept D. All the above
Description : Primary treatment of sewage consists of removal of A. Large suspended organic solids B. Oil and grease C. Sand and girt D. Floating materials
Description : For treating the sewage of a large city, you will recommend A. A sedimentation tank and an activated sludge treatment plant B. A plant consisting of Imhoff tanks with low rate trickling filters C. Sedimentation tanks with high rate trickling filters D. None of these
Description : The sewage treatment units in which anaerobic decomposition of organic matter is used, are called A. Imhoff tanks B. Trickling filters C. Sludge sedimentation tanks D. None of these
Description : During preliminary treatment of a sewage A. Oil and grease are removed from skimming tanks B. Floating materials are removed by screening C. Girt and sand are removed by girt chambers D. All the above
Description : The sewer that unloads the sewage at the point of treatment is called A. Main sewer B. Outfall sewer C. Branch sewer D. House sewer
Description : No treatment of the sewage is given if dilution factor is A. Less than 150 B. Between 150 to 200 C. Between 200 to 300 D. More than 500
Description : A five day B.O.D. at 15°C of the sewage of a town is 100 kg/day. If the 5 day B.O.D. per head at 15°C for standard sewage is 0.1 kg/day, the population equivalent is A. 100 B. 1000 C. 5000 D. 10000
Description : If 2% solution of a sewage sample is incubated for 5 days at 20°C and depletion of oxygen was found to be 5 ppm, B.O.D. of the sewage is A. 200 ppm B. 225 ppm C. 250 ppm D. None of these
Description : Pick up the correct statement from the following: A. Hydrogen sulphide gas in excess, may cause corrosion of concrete sewers B. 4 ppm of Dissolved Oxygen (D.O.) is ensured before discharging the treated ... river C. Solubility of oxygen in sewage is 95% of that of distilled water D. All the above
Description : Pick up the correct statement from the following: A. In treated sewage, 4 ppm of D.O. is essential B. Only very fresh sewage contains some dissolved oxygen C. The solubility of oxygen in sewage is 95% that is in distilled water D. All the above
Description : The pressure exerted by A. The sewage when running full from inside, is called internal pressure B. The internal pressure if any, causes tensile stress in the pipe material C. Pressure sewers are designed to be safe in tension D. All the above
Description : Q No: 271 Pick up the correct statement from the following: A. Turbidity is more in strong sewage B. The black colour indicates septic sewage C. The sewage omits offensive odours after four hours D. All the above
Description : A cylindrical ejector having its height 2 m fills after every 10 minutes with a peak sewage discharge of 0.0157 cumec. The diameter of the ejector chamber, is A. 2.30 m B. 2.40 m C. 2.45 m D. 2.50 m
Description : Before discharging the foul sewage into rivers, it is generally treated by A. Screening B. Sedimentation C. Oxidation D. All the above
Description : In 1000 kg of sewage, the total solids approximate A. 0.5 to 1.0 kg B. 1 kg to 2.0 kg C. 5 kg to 7.5 kg D. 7.5 kg to 10 kg
Description : During purification process of sewage the gas given off, is A. Carbon dioxide B. Hydrogen C. Ammonia D. All the above
Description : In sewage, the solids in mg per litre is A. 100 to 500 B. 500 to 1000 C. 1000 to 1500 D. 1500 to 2000
Description : Fresh sewage may become stale in A. One hour B. Two to three hours C. Three to four hours D. Six hours
Description : Rate of flow of sewage is generally assumed A. More than the rate of water supply B. Equal to the rate of water supply C. Less than the rate of water supply D. At 150 litres per capita
Description : Removal of oil and grease from sewage, is known A. Screening B. Skimming C. Filtration D. None of these
Description : The ratio of minimum hourly flow to the average flow of sewage is A. 1/4 B. 1/3 C. 1/2 D. 3/4
Description : When drainage to sewage ratio is 20, the peak dry weather flow is A. 20% of the design discharge B. Slightly less than 5% of the design discharge C. Slightly more than 5% of the design discharge D. None of these
Description : The non-clog pump which permits solid matter to pass out with the liquid sewage, is A. Centrifugal pump B. Reciprocating pump C. Pneumatic ejector D. None of these
Description : The sewage is pumped up A. From low lying areas B. From flat areas C. From basements D. All the above
Description : In sewage having fully oxidised organic matter, the nitrogen exists in the form of A. Nitrites B. Nitrates C. Free ammonia D. Aluminoid nitrogen
Description : Dry water flow in a combined sewer, is A. Industrial sewage B. Domestic sewage C. Storm water D. Inclusive of domestic and industrial sewage but excludes storm water
Description : The presence of free ammonia in sewage, is detected by A. Boiling B. Adding potassium permanganate C. Adding sulphuric acid D. Phenol-di-sulphuric acid
Description : Disposal to sewage in large cities, is done in A. Irrigation B. Dilution C. Oxidation D. Purification
Description : The dimensions of a rectangular settling tank are: length 24 m, width 6 m and depth 3 m. If 2 hour detention period for tanks is recommended, the rate of flow of sewage per hour, is A. 204 cu.m B. 208 cu.m C. 212 cu.m D. 216 cu.m
Description : A rain sanitary sewer is constructed to carry A. Sanitary sewage B. Storm sewage C. Surface water D. Ground water
Description : For detecting the nitrites in the sewage, the matching colour may be developed by adding A. Potassium permanganate B. Sulphuric acid and napthamine C. Phenol-di -sulphuric acid potassium hydroxide D. None of these
Description : Fresh sewage is generally A. Alkaline B. Acidic C. Highly decomposed D. A source of objectionable odour
Description : For sewer mains of 0.5 to 1 m diameter, the ratio of maximum daily sewage flow to the average daily sewage flow is assumed A. 1.5 B. 2.0 C. 2.5 D. 3.0