In vulcanization, natural rubber is heated with- (1) Carbon (2) Sulphur (3) Silicon (4) Phosphorus

In vulcanization, natural rubber is heated with- (1) Carbon (2) Sulphur (3) Silicon (4) Phosphorus
by

1 Answer

Answer :

(2) Sulphur Explanation: Vulcanization of rubber is a process of improvement of the rubber elasticity and strength by heating it in the presence of sulfur, which results in three-dimensional crosslinking of the chain rubber molecules (polyisoprene) bonded to each other by sulfur atoms.
by
selected

Related questions

Vulcanization of rubber is carried out by adding (1) Sulphur (2) Carbon (3) Ozone (4) Phosphorus

Description : Vulcanization of rubber is carried out by adding (1) Sulphur (2) Carbon (3) Ozone (4) Phosphorus

Last Answer : Sulphur

In commercial vulcanization, crosslinking is introduced by the addition of: w) sulfur x) toluene y) silicon z) phosphorus

Description : In commercial vulcanization, crosslinking is introduced by the addition of: w) sulfur x) toluene y) silicon z) phosphorus

Last Answer : ANSWER: W -- SULFUR

The element used for vulcanizing rubber is - (1) Sulphur (2) Bromine (3) Silicon (4) Phosphorus

Description : The element used for vulcanizing rubber is - (1) Sulphur (2) Bromine (3) Silicon (4) Phosphorus

Last Answer : (1) Sulphur Explanation: The vulcanization of neoprene or polychloroprene rubber (CR rubber) is carried out using metal oxides (specifically MgO and ZnO, sometimes Pb3O4) rather than sulfur compounds which are presently used with many natural and synthetic rubbers.

The element which is used for vulcanizing rubber – (1) Sulphur (2) Bromine (3) Silicon (4) Phosphorus

Description : The element which is used for vulcanizing rubber – (1) Sulphur (2) Bromine (3) Silicon (4) Phosphorus

Last Answer : (1) Sulphur Explanation: Vulcanisation is a chemical process for converting rubber or related polymers into more durable materials via the addition of sulfur or other equivalent "curatives" or "accelerators". By far the most common vulcanizing methods depend on sulfur.

The element which is used for vulcanizing rubber (1) Sulphur (2) Bromine (3) Silicon (4) Phosphorus

Description : The element which is used for vulcanizing rubber (1) Sulphur (2) Bromine (3) Silicon (4) Phosphorus

Last Answer : Sulphur

The process of improving the quality of rubber by heating it with sulphur is called. (1) Vulcanization (2) Acceleration (3) Sulphonation (4) Galvanization

Description : The process of improving the quality of rubber by heating it with sulphur is called. (1) Vulcanization (2) Acceleration (3) Sulphonation (4) Galvanization

Last Answer : (1) Vulcanization Explanation: Vulcanization is a chemical process for converting natural rubber into more durable materials via the addition of sulfur or other equivalent curatives or accelerators. These additives modify the polymer by forming crosslinks (bridges) between individual polymer chains.

The process of improving the quality of rubber by heating it with sulphur is called. (1) Vulcanization (2) Acceleration (3) Sulphonation (4) Galvanization

Description : The process of improving the quality of rubber by heating it with sulphur is called. (1) Vulcanization (2) Acceleration (3) Sulphonation (4) Galvanization

Last Answer : Vulcanization

Brittleness of cold is due to an excess of (A) Sulphur (B) Carbon (C) Phosphorus (D) Silicon

Description : Brittleness of cold is due to an excess of (A) Sulphur (B) Carbon (C) Phosphorus (D) Silicon

Last Answer : Answer: Option C

Red short iron cracks when bent due to the presence of (A) Sulphur (B) Carbon (C) Phosphorus (D) Silicon

Description : Red short iron cracks when bent due to the presence of (A) Sulphur (B) Carbon (C) Phosphorus (D) Silicon

Last Answer : Answer: Option A

Vulcanization is the process of cross-linking polymer chains in rubber using (a) Sulfur. (b) Formaldehye. (c) Benzoyl peroxide. (d) Ethylene glycol.

Description : Vulcanization is the process of cross-linking polymer chains in rubber using (a) Sulfur. (b) Formaldehye. (c) Benzoyl peroxide. (d) Ethylene glycol.

Last Answer : Sulfur.

In vulcanisation process, rubber can be hardened by adding - (1) Nitrogen (2) Silicon (3) Sulphur (4) Alcohol

Description : In vulcanisation process, rubber can be hardened by adding - (1) Nitrogen (2) Silicon (3) Sulphur (4) Alcohol

Last Answer : (3) Sulphur Explanation: In order to give more strength and more elasticity, natural rubber is heated with sulphur or sulphur compounds at 150°C temperature. Vulcanized rubber has good tensile strength.

In vulcanisation process, rubber can be hardened by adding (1) Nitrogen (2) Silicon (3) Sulphur (4) Alcohol

Description : In vulcanisation process, rubber can be hardened by adding (1) Nitrogen (2) Silicon (3) Sulphur (4) Alcohol

Last Answer : Sulphur

Which of the following constituents of cast iron is mainly responsible for imparting it an anti-corrosive property? (A) Silicon (B) Phosphorus (C) Sulphur (D) None of these

Description : Which of the following constituents of cast iron is mainly responsible for imparting it an anti-corrosive property? (A) Silicon (B) Phosphorus (C) Sulphur (D) None of these

Last Answer : (A) Silicon

Which of the following groups of elements have an OUTER ELECTRONIC configuration of S-2-P-2? w) halogens x) Nitrogen-Phosphorus Group y) Carbon-Silicon Group z) Boron-Aluminum Group

Description : Which of the following groups of elements have an OUTER ELECTRONIC configuration of S-2-P-2? w) halogens x) Nitrogen-Phosphorus Group y) Carbon-Silicon Group z) Boron-Aluminum Group

Last Answer : ANSWER: Y -- CARBON-SILICON GROUP

Acid rain is caused due to pollution of atmosphere by – (1) oxides of carbon and nitrogen (2) oxides of nitrogen and sulphur (3) oxides of nitrogen and phosphorus (4) None of these

Description : Acid rain is caused due to pollution of atmosphere by – (1) oxides of carbon and nitrogen (2) oxides of nitrogen and sulphur (3) oxides of nitrogen and phosphorus (4) None of these

Last Answer : (2) oxides of nitrogen and sulphur Explanation: Acid rain is caused by emissions of Sulpfur Dioxide (SO2) and Nitrogen Oxide (NOx), which react with the water molecules in the atmosphere to produce acids.

Which of the following is used in making smoke bombs? (1) Sulphur (2) Phosphorus (3) Hydrogen (4) Carbon

Description : Which of the following is used in making smoke bombs? (1) Sulphur (2) Phosphorus (3) Hydrogen (4) Carbon

Last Answer : (4) Carbon Explanation: A smoke bomb is a firework designed to produce smoke upon ignition. Smoke bombs are useful to military units, airsoft games, paintball games, self-defense and pranks. The ... -style fireworks and later modified the formula to produce more smoke for a longer period of time.

Which of the following is used in making smoke bombs? (1) Sulphur (2) Phosphorus (3) Hydrogen (4) Carbon

Description : Which of the following is used in making smoke bombs? (1) Sulphur (2) Phosphorus (3) Hydrogen (4) Carbon

Last Answer : Carbon

Iron ore may contain (A) Carbon (B) Silicon (C) Phosphorus and manganese (D) All the above

Description : Iron ore may contain (A) Carbon (B) Silicon (C) Phosphorus and manganese (D) All the above

Last Answer : Answer: Option D

The substance that is added to make natural rubber strong and more bouncy is – (1) Polythene (2) Sponge (3) Sulphur (4) Chlorine

Description : The substance that is added to make natural rubber strong and more bouncy is – (1) Polythene (2) Sponge (3) Sulphur (4) Chlorine

Last Answer : (3) Sulphur Explanation: Vulcanization is a chemical process for converting rubber or related polymers into more durable materials via the addition of sulfur or other equivalent "curatives ... individual polymer chains. Vulcanized materials are less sticky and have superior mechanical properties.

The substance that is added to make natural rubber strong and more bouncy is (1) Polythene (2) Sponge (3) Sulphur (4) Chlorine

Description : The substance that is added to make natural rubber strong and more bouncy is (1) Polythene (2) Sponge (3) Sulphur (4) Chlorine

Last Answer : Sulphur

Addition of lead, sulphur and phosphorus to low carbon steel helps in improving its (A) Corrosion resistance (B) Tensile strength (C) Machinability (D) Compressive strength

Description : Addition of lead, sulphur and phosphorus to low carbon steel helps in improving its (A) Corrosion resistance (B) Tensile strength (C) Machinability (D) Compressive strength

Last Answer : (C) Machinability

Which of the following pairs is a sedimentary type of biogeochemical cycle? (a) Phosphorus and nitrogen (b) Phosphorus and sulphur (c) Oxygen and nitrogen (d) Phosphorus and carbon dioxide

Description : Which of the following pairs is a sedimentary type of biogeochemical cycle? (a) Phosphorus and nitrogen (b) Phosphorus and sulphur (c) Oxygen and nitrogen (d) Phosphorus and carbon dioxide

Last Answer : (b) Phosphorus and sulphur

Which one of the following is not a gaseous biogeochemical cycle in ecosystem? (a) Sulphur cycle (b) Phosphorus cycle (c) Nitrogen cycle (d) Carbon cycle

Description : Which one of the following is not a gaseous biogeochemical cycle in ecosystem? (a) Sulphur cycle (b) Phosphorus cycle (c) Nitrogen cycle (d) Carbon cycle

Last Answer : b) Phosphorus cycle

In which of the following both pairs have correct combination? (a) Gaseous nutrient cycle, Sedimentary nutrient cycle Nitrogen and Sulphur, Carbon and Phosphorus (b) Gaseous nutrient cycle, Sedimentary nutrient cycle Sulphur and Phosphorus, Carbon and Nitrogen (c) Gaseous nutrient cycle, Sedimentary nutrient cycle Carbon and Nitrogen, Sulphur and Phosphorus (d) Gaseous nutrient cycle, Sedimentary nutrient cycle Carbon and Sulphur, Nitrogen and Phosphorus

Description : In which of the following both pairs have correct combination? (a) Gaseous nutrient cycle, Sedimentary nutrient cycle Nitrogen and Sulphur, Carbon and Phosphorus (b) Gaseous nutrient cycle ... (d) Gaseous nutrient cycle, Sedimentary nutrient cycle Carbon and Sulphur, Nitrogen and Phosphorus

Last Answer : (c) Gaseous nutrient cycle, Sedimentary nutrient cycle Carbon and Nitrogen, Sulphur and Phosphorus

About 98 percent of the mass of every living organism is composed of just six elements including carbon, hydrogen, nitrogen, oxygen and (a) sulphur and magnesium (b) magnesium and sodium (c) calcium and phosphorus (d) phosphorus and sulphur.

Description : About 98 percent of the mass of every living organism is composed of just six elements including carbon, hydrogen, nitrogen, oxygen and (a) sulphur and magnesium (b) magnesium and sodium (c) calcium and phosphorus (d) phosphorus and sulphur.

Last Answer : (d) phosphorus and sulphur.

Which one of the following is not a gaseous biogeochemical cycle in ecosystem ? (1) Carbon cycle (2) Sulphur cycle (3) Phosphorus cycle (4) Nitrogen cycle

Description : Which one of the following is not a gaseous biogeochemical cycle in ecosystem ? (1) Carbon cycle (2) Sulphur cycle (3) Phosphorus cycle (4) Nitrogen cycle

Last Answer : (3) Phosphorus cycle

In vulcanisation, with which the natural rubber is heated? -Do You Know?

Description : In vulcanisation, with which the natural rubber is heated? -Do You Know?

Last Answer : answer:

In vulcanisation, with which the natural rubber is heated?

Description : In vulcanisation, with which the natural rubber is heated?

Last Answer : Sulphur

Which one of the following elements is least likely to be found in commercial fertilisers? (1) Nitrogen (2) Phosphorus (3) Potassium (4) Silicon

Description : Which one of the following elements is least likely to be found in commercial fertilisers? (1) Nitrogen (2) Phosphorus (3) Potassium (4) Silicon

Last Answer : (4) Silicon Explanation: Commercial Fertilizers - a substance containing one or more recognized plant nutrients and that is used for its plant nutrient content or that is designated for use or claimed to have value in promoting plant growth.

Which of the following elements has the atomic number greater than that of Phosphorus? (1) Aluminium (2) Silicon (3) Chlorine (4) Magnesium

Description : Which of the following elements has the atomic number greater than that of Phosphorus? (1) Aluminium (2) Silicon (3) Chlorine (4) Magnesium

Last Answer : (3) Chlorine Explanation: Chlorine is a chemical element with symbol Cl and atomic number 17. Phosphorus is a chemical element with symbol P and atomic number 15.

Which of the following substances would be the best choice to neutralize sulfuric acid? w) sodium hydroxide x) silicon dioxide y) copper metal z) phosphorus pentoxide

Description : Which of the following substances would be the best choice to neutralize sulfuric acid? w) sodium hydroxide x) silicon dioxide y) copper metal z) phosphorus pentoxide

Last Answer : ANSWER: W -- SODIUM HYDROXIDE

Which of the following substances would be the best choice to neutralize aqueous Sodium Hydroxide? w) sodium carbonate x) silicon dioxide y) aluminum oxide z) phosphorus pentoxide

Description : Which of the following substances would be the best choice to neutralize aqueous Sodium Hydroxide? w) sodium carbonate x) silicon dioxide y) aluminum oxide z) phosphorus pentoxide

Last Answer : ANSWER: Z -- PHOSPHORUS PENTOXIDE

What is produced when phosphorus pentachloride is heated ?

Description : What is produced when phosphorus pentachloride is heated ?

Last Answer : When phosphorus pentachloride is heated, phosphorus trichloride and chlorine are produced.

Diamond is an allotrope of (a) Tin (b) Silicon (c) Sulphur (d) Carbon

Description : Diamond is an allotrope of (a) Tin (b) Silicon (c) Sulphur (d) Carbon

Last Answer : Ans:(d)

__________ is added in low carbon steel to raise its yield point. (A) Sulphur (B) Phosphorous (C) Silicon (D) Manganese

Description : __________ is added in low carbon steel to raise its yield point. (A) Sulphur (B) Phosphorous (C) Silicon (D) Manganese

Last Answer : (D) Manganese

The process of covering water pipes made of Iron with Zinc layer to prevent corrosion is called – (1) Zinc plating (2) Alloy formation (3) Vulcanization (4) Galvanization

Description : The process of covering water pipes made of Iron with Zinc layer to prevent corrosion is called – (1) Zinc plating (2) Alloy formation (3) Vulcanization (4) Galvanization

Last Answer : (4) Galvanization Explanation: Galvanization is the process of applying a protective zinc coating to steel or iron, in order to prevent rusting.

The process of covering water pipes made of Iron with Zinc layer to prevent corrosion is called : (1) Zinc plating (2) Alloy formation (3) Vulcanization (4) Galvanization

Description : The process of covering water pipes made of Iron with Zinc layer to prevent corrosion is called : (1) Zinc plating (2) Alloy formation (3) Vulcanization (4) Galvanization

Last Answer : Galvanization

Pick out the wrong statement. (A) Benzopyrene which causes cancer is present in traces in tobacco, charcoal & petrol driven automobile exhaust (B) NO2 is capable of penetrating the troposphere and can absorb both ultraviolet & visible light (C) Hydrocarbon pollutants are produced by sweet gum, oak & natural rubber trees (D) H2S is not at all produced during combustion of sulphur bearing fuels as all the sulphur is oxidised to SO2

Description : Pick out the wrong statement. (A) Benzopyrene which causes cancer is present in traces in tobacco, charcoal & petrol driven automobile exhaust (B) NO2 is capable of penetrating the troposphere and ... at all produced during combustion of sulphur bearing fuels as all the sulphur is oxidised to SO2

Last Answer : (D) H2S is not at all produced during combustion of sulphur bearing fuels as all the sulphur is oxidised to SO2

Which of the following is Colourless? (1) Chlorine (2) Oxygen (3) Phosphorus (4) Sulphur

Description : Which of the following is Colourless? (1) Chlorine (2) Oxygen (3) Phosphorus (4) Sulphur

Last Answer : (2) Oxygen

The element absorbed both in cation and anion form is – (1) Sulphur (2) Nitrogen (3) Calcium (4) Phosphorus

Description : The element absorbed both in cation and anion form is – (1) Sulphur (2) Nitrogen (3) Calcium (4) Phosphorus

Last Answer : (2) Nitrogen Explanation: Nitrogen, required in large quantities for healthy plant growth, is supplied either as a cation (ammonium) or an anion (nitrate). The ratio of these two forms of nitrogen in the nutrient solution can have large effects on both the rate and direction of pH changes with time.

Which of the following is used as a lubricant in heavy machines? (1) Bauxite (2) Sulphur (3) Phosphorus (4) Graphite

Description : Which of the following is used as a lubricant in heavy machines? (1) Bauxite (2) Sulphur (3) Phosphorus (4) Graphite

Last Answer : (4) Graphite Explanation: Graphite is used as a lubricant in heavy machines. it is made of carbon atoms arranged in sheets of hexagonal units - looks a lot like chicken-wire. Another sheet forms on ... ) between the sheets, so they are able to slide freely over each other without breaking any bonds.

The element absorbed both in cation and anion form is (1) Sulphur (2) Nitrogen (3) Calcium (4) Phosphorus

Description : The element absorbed both in cation and anion form is (1) Sulphur (2) Nitrogen (3) Calcium (4) Phosphorus 

Last Answer : Nitrogen

Which of the following is colourless ? (1) Chlorine (2) Oxygen (3) Phosphorus (4) Sulphur

Description : Which of the following is colourless ? (1) Chlorine (2) Oxygen (3) Phosphorus (4) Sulphur

Last Answer : Oxygen

Which of the following is used as a lubricant in heavy machines? (1) Bauxite (2) Sulphur (3) Phosphorus (4) Graphite

Description : Which of the following is used as a lubricant in heavy machines? (1) Bauxite (2) Sulphur (3) Phosphorus (4) Graphite

Last Answer : Graphite

The element used in the manufacture of safety matches is – (1) Phosphorous (2) Magnesium (3) Silicon (4) Sulphur

Description : The element used in the manufacture of safety matches is – (1) Phosphorous (2) Magnesium (3) Silicon (4) Sulphur

Last Answer : (1) Phosphorous Explanation: One end of a match is coated with a material that can be ignited by frictional heat generated by striking the match against a suitable surface. The coated end ... ," contains either phosphorus or phosphorus sesquisulfide as the active ingredient and gelatin as a binder.

The element used in the manufacture of safety matches is (1) Phosphorous (2) Magnesium (3) Silicon (4) Sulphur

Description : The element used in the manufacture of safety matches is (1) Phosphorous (2) Magnesium (3) Silicon (4) Sulphur

Last Answer : Phosphorous

Can a silicon nucleus `(._(14)^(31)Si)` transfrom into a phosphorus nucleus `(._(15)^(31)P)` ? What particle would be emitted in the process ? What is

Description : Can a silicon nucleus `(._(14)^(31)Si)` transfrom into a phosphorus nucleus `(._(15)^(31)P)` ? What particle would be emitted in the process ? What is

Last Answer : Can a silicon nucleus `(._(14)^(31)Si)` transfrom into a phosphorus nucleus `(._(15)^(31)P)` ? What ... = 30.97535 am u, m_(p) = 30.97376 am u`

Which of the following is a semiconductor? (a) Phosphorus (b) Wood (c) Silicon (d) Glass

Description : Which of the following is a semiconductor? (a) Phosphorus (b) Wood (c) Silicon (d) Glass

Last Answer : Ans:(c)

The elements known as primary nutrients for plants (1) Nitrogen, Phosphorus and Potassium (2) Nitrogen, Oxygen and Silicon (3) Potassium, Boron and Nitrogen (4) Nitrogen, Phosphorus and Iron

Description : The elements known as primary nutrients for plants (1) Nitrogen, Phosphorus and Potassium (2) Nitrogen, Oxygen and Silicon (3) Potassium, Boron and Nitrogen (4) Nitrogen, Phosphorus and Iron

Last Answer : (1) Nitrogen, Phosphorus and Potassium Explanation: Nitrogen (N), Phosphorus (P) and Potassium (K) are considered as the three essential or primary nutrients for plants. Together they make up ... need small quantities of iron, manganese, zinc, copper, boron and molybdenum, known as trace elements

The elements known as primary nutrients for plants (1) Nitrogen, Phosphorus and Potassium (2) Nitrogen, Oxygen and Silicon (3) Potassium, Boron and Nitrogen (4) Nitrogen, Phosphorus and Iron

Description : The elements known as primary nutrients for plants (1) Nitrogen, Phosphorus and Potassium (2) Nitrogen, Oxygen and Silicon (3) Potassium, Boron and Nitrogen (4) Nitrogen, Phosphorus and Iron

Last Answer : Nitrogen, Phosphorus and Potassium