Which of the following constituents of cast iron is mainly responsible for imparting it an anti-corrosive property? (A) Silicon (B) Phosphorus (C) Sulphur (D) None of these

Which of the following constituents of cast iron is mainly responsible
for imparting it an anti-corrosive property?
(A) Silicon
(B) Phosphorus
(C) Sulphur
(D) None of these
by

1 Answer

Answer :

(A) Silicon
by

Related questions

H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin

Red short iron cracks when bent due to the presence of (A) Sulphur (B) Carbon (C) Phosphorus (D) Silicon

Description : Red short iron cracks when bent due to the presence of (A) Sulphur (B) Carbon (C) Phosphorus (D) Silicon

Last Answer : Answer: Option A

Which of the following constituents present in petroleum is responsible for ash formation? (A) Nitrogen compounds (B) Organometallic compounds (C) Sulphur compounds (D) Oxygen compounds

Description : Which of the following constituents present in petroleum is responsible for ash formation? (A) Nitrogen compounds (B) Organometallic compounds (C) Sulphur compounds (D) Oxygen compounds

Last Answer : (C) Sulphur compounds

The element used for vulcanizing rubber is - (1) Sulphur (2) Bromine (3) Silicon (4) Phosphorus

Description : The element used for vulcanizing rubber is - (1) Sulphur (2) Bromine (3) Silicon (4) Phosphorus

Last Answer : (1) Sulphur Explanation: The vulcanization of neoprene or polychloroprene rubber (CR rubber) is carried out using metal oxides (specifically MgO and ZnO, sometimes Pb3O4) rather than sulfur compounds which are presently used with many natural and synthetic rubbers.

In vulcanization, natural rubber is heated with- (1) Carbon (2) Sulphur (3) Silicon (4) Phosphorus

Description : In vulcanization, natural rubber is heated with- (1) Carbon (2) Sulphur (3) Silicon (4) Phosphorus

Last Answer : (2) Sulphur Explanation: Vulcanization of rubber is a process of improvement of the rubber elasticity and strength by heating it in the presence of sulfur, which results in three-dimensional crosslinking of the chain rubber molecules (polyisoprene) bonded to each other by sulfur atoms.

The element which is used for vulcanizing rubber – (1) Sulphur (2) Bromine (3) Silicon (4) Phosphorus

Description : The element which is used for vulcanizing rubber – (1) Sulphur (2) Bromine (3) Silicon (4) Phosphorus

Last Answer : (1) Sulphur Explanation: Vulcanisation is a chemical process for converting rubber or related polymers into more durable materials via the addition of sulfur or other equivalent "curatives" or "accelerators". By far the most common vulcanizing methods depend on sulfur.

Brittleness of cold is due to an excess of (A) Sulphur (B) Carbon (C) Phosphorus (D) Silicon

Description : Brittleness of cold is due to an excess of (A) Sulphur (B) Carbon (C) Phosphorus (D) Silicon

Last Answer : Answer: Option C

The element which is used for vulcanizing rubber (1) Sulphur (2) Bromine (3) Silicon (4) Phosphorus

Description : The element which is used for vulcanizing rubber (1) Sulphur (2) Bromine (3) Silicon (4) Phosphorus

Last Answer : Sulphur

During the manufacture of sulphuric acid, the temperature of molten sulphur is not increased beyond 160°C, as (A) It is very corrosive at elevated temperature (B) Its viscosity is not reduced on further heating (hence pressure drop on pumping it, cannot be further reduced) (C) It decomposes on further increasing the temperature (D) None of these

Description : During the manufacture of sulphuric acid, the temperature of molten sulphur is not increased beyond 160°C, as (A) It is very corrosive at elevated temperature (B) Its viscosity is not reduced on ... be further reduced) (C) It decomposes on further increasing the temperature (D) None of these

Last Answer : (B) Its viscosity is not reduced on further heating (hence pressure drop on pumping it, cannot be further reduced)

The fermenter used in the production of penicillin (by deep fermentation process) is made of (A) Glass (B) Glass lined steel (C) High silicon cast iron (D) Porcelain

Description : The fermenter used in the production of penicillin (by deep fermentation process) is made of (A) Glass (B) Glass lined steel (C) High silicon cast iron (D) Porcelain

Last Answer : (B) Glass lined steel

An ideal material of construction for the storage of 50% caustic soda solution would be (A) Karbate (B) High silicon cast iron (C) Monel (D) None of these

Description : An ideal material of construction for the storage of 50% caustic soda solution would be (A) Karbate (B) High silicon cast iron (C) Monel (D) None of these

Last Answer : (C) Monel

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

Carbon percentage is the same in cast iron and (A) Wrought iron(B) Pig iron(C) Mild steel(D) High silicon (14%) iron

Description : Carbon percentage is the same in cast iron and (A) Wrought iron (B) Pig iron (C) Mild steel (D) High silicon (14%) iron

Last Answer : (B) Pig iron

Silicon percentage in acid resistant cast iron is about (A) 4 (B) 8 (C) 14 (D) 20

Description : Silicon percentage in acid resistant cast iron is about (A) 4 (B) 8 (C) 14 (D) 20

Last Answer : (C) 14

Concentrated HCl at 30°C can be stored in a vessel made of (A) PTFE and porcelain (B) Cast iron and aluminium (C) Stainless steel and high silicon cast iron (D) None of these

Description : Concentrated HCl at 30°C can be stored in a vessel made of (A) PTFE and porcelain (B) Cast iron and aluminium (C) Stainless steel and high silicon cast iron (D) None of these

Last Answer : (A) PTFE and porcelain

Presence of high amount of silicon in cast iron (A) Suppresses the decomposition of Fe3C (B) Increases the formation of graphite (C) Increases the contraction of the metal (D) Reduces its fluidity

Description : Presence of high amount of silicon in cast iron (A) Suppresses the decomposition of Fe3C (B) Increases the formation of graphite (C) Increases the contraction of the metal (D) Reduces its fluidity

Last Answer : (B) Increases the formation of graphite

100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain

Description : 100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain

Last Answer : (C) Aluminium, tin and rubber

Rotary driers are generally made of (A) Cast iron (B) Mild steel (C) High silicon iron (14% Si) (D) Tin lined with refractory bricks

Description : Rotary driers are generally made of (A) Cast iron (B) Mild steel (C) High silicon iron (14% Si) (D) Tin lined with refractory bricks

Last Answer : (B) Mild steel

Corrosion resisting properties of cast iron are significantly improved by the addition of 12 - 15% of (A) Tungsten (B) Vanadium (C) Silicon (D) All (A), (B) & (C)

Description : Corrosion resisting properties of cast iron are significantly improved by the addition of 12 - 15% of (A) Tungsten (B) Vanadium (C) Silicon (D) All (A), (B) & (C)

Last Answer : (C) Silicon

Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Description : Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Last Answer : (A) Stainless steel or glass lined steel

Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber, Kel-F and Teflon (B) Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon

Containers made of high silicon cast iron (14% Si) are not suitable for the storage of (A) Acetic acid (B) Benzoic & boric acids (C) Phosphoric acid (95%) & sulphuric acid (95%) (D) Hydrochloric acid (concentrated)

Description : Containers made of high silicon cast iron (14% Si) are not suitable for the storage of (A) Acetic acid (B) Benzoic & boric acids (C) Phosphoric acid (95%) & sulphuric acid (95%) (D) Hydrochloric acid (concentrated)

Last Answer : (D) Hydrochloric acid (concentrated)

__________ iron is the purest form of iron. (A) Cast(B) Wrought(C) Pig(D) High silicon

Description : __________ iron is the purest form of iron. (A) Cast (B) Wrought (C) Pig (D) High silicon

Last Answer : (B) Wrought

Silicon percentage in acid resistant cast iron is about (A) 4 (B) 8 (C) 14 (D) 20

Description : Silicon percentage in acid resistant cast iron is about (A) 4 (B) 8 (C) 14 (D) 20

Last Answer : (A) 4

Addition of silicon to cast iron (A) Promotes graphite module formation (B) Improves its ductility (C) Does not promote graphite flakes formation (D) Increases the fluidity of molten metal

Description : Addition of silicon to cast iron (A) Promotes graphite module formation (B) Improves its ductility (C) Does not promote graphite flakes formation (D) Increases the fluidity of molten metal

Last Answer : Option D

The elements known as primary nutrients for plants (1) Nitrogen, Phosphorus and Potassium (2) Nitrogen, Oxygen and Silicon (3) Potassium, Boron and Nitrogen (4) Nitrogen, Phosphorus and Iron

Description : The elements known as primary nutrients for plants (1) Nitrogen, Phosphorus and Potassium (2) Nitrogen, Oxygen and Silicon (3) Potassium, Boron and Nitrogen (4) Nitrogen, Phosphorus and Iron

Last Answer : (1) Nitrogen, Phosphorus and Potassium Explanation: Nitrogen (N), Phosphorus (P) and Potassium (K) are considered as the three essential or primary nutrients for plants. Together they make up ... need small quantities of iron, manganese, zinc, copper, boron and molybdenum, known as trace elements

Iron ore may contain (A) Carbon (B) Silicon (C) Phosphorus and manganese (D) All the above

Description : Iron ore may contain (A) Carbon (B) Silicon (C) Phosphorus and manganese (D) All the above

Last Answer : Answer: Option D

The elements known as primary nutrients for plants (1) Nitrogen, Phosphorus and Potassium (2) Nitrogen, Oxygen and Silicon (3) Potassium, Boron and Nitrogen (4) Nitrogen, Phosphorus and Iron

Description : The elements known as primary nutrients for plants (1) Nitrogen, Phosphorus and Potassium (2) Nitrogen, Oxygen and Silicon (3) Potassium, Boron and Nitrogen (4) Nitrogen, Phosphorus and Iron

Last Answer : Nitrogen, Phosphorus and Potassium

The type of liquor circulation system to be ' employed in evaporators (viz. natural or forced circulation) is determined mainly by the __________ of the liquid. (A) Viscosity (B) Density (C) Thermal conductivity (D) Corrosive nature

Description : The type of liquor circulation system to be ' employed in evaporators (viz. natural or forced circulation) is determined mainly by the __________ of the liquid. (A) Viscosity (B) Density (C) Thermal conductivity (D) Corrosive nature

Last Answer : (A) Viscosity

Cast iron contains phosphorus as impurity. In Bessemerisation of this cast iron the slag formed is

Description : Cast iron contains phosphorus as impurity. In Bessemerisation of this cast iron the slag formed is

Last Answer : Cast iron contains phosphorus as impurity. In Bessemerisation of this cast iron the slag formed is A. `FePO_(4)` B. ` ... (4)` D. `Zn_(3)(PO_(4))_(2)`

Sulphur melting pit in the sulphuric acid plant is made of (A) Lead lined stainless steel (B) Cast iron (C) Steel or cement-brick lined (D) Hard wood

Description : Sulphur melting pit in the sulphuric acid plant is made of (A) Lead lined stainless steel (B) Cast iron (C) Steel or cement-brick lined (D) Hard wood

Last Answer : (C) Steel or cement-brick lined

Minerals known to be required in large amounts for plant growth include (a) potassium, phosphorus, selenium, boron (b) magnesium, sulphur, iron, zinc (c) phosphorus, potassium, sulphur, calcium (d) calcium, magnesium, manganese, copper.

Description : Minerals known to be required in large amounts for plant growth include (a) potassium, phosphorus, selenium, boron (b) magnesium, sulphur, iron, zinc (c) phosphorus, potassium, sulphur, calcium (d) calcium, magnesium, manganese, copper.

Last Answer : (c) phosphorus, potassium, sulphur, calcium

Pig iron made from haematite ores free from sulphur, phosphorus and copper, is known as (A) Bessemer pig (B) Grey or foundry pig (C) White or forge pig (D) Mottled pig

Description : Pig iron made from haematite ores free from sulphur, phosphorus and copper, is known as (A) Bessemer pig (B) Grey or foundry pig (C) White or forge pig (D) Mottled pig

Last Answer : Answer: Option A

Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Description : Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Last Answer : (B) High vapour pressure

Which of the following is the most important rubber compounding ingredient which is used to improve wearing qualities of both natural rubber & SBR by imparting toughness? (A) Phosphorous (B) Carbon black (C) Pine oil (D) Rosin

Description : Which of the following is the most important rubber compounding ingredient which is used to improve wearing qualities of both natural rubber & SBR by imparting toughness? (A) Phosphorous (B) Carbon black (C) Pine oil (D) Rosin

Last Answer : (B) Carbon black

__________ is the process of coating the surface of steel with aluminium oxide, thereby imparting it increased resistance to corrosion & oxidation upto a temperature of 700°C. (A) Veneering (B) Galvanising (C) Electroplating (D) Calorising

Description : __________ is the process of coating the surface of steel with aluminium oxide, thereby imparting it increased resistance to corrosion & oxidation upto a temperature of 700°C. (A) Veneering (B) Galvanising (C) Electroplating (D) Calorising

Last Answer : (D) Calorising

Which of the following constituents of a fuel does not contribute to its calorific value on combustion? (A) Hydrogen (B) Sulphur (C) Carbon (D) None of these

Description : Which of the following constituents of a fuel does not contribute to its calorific value on combustion? (A) Hydrogen (B) Sulphur (C) Carbon (D) None of these

Last Answer : (D) None of these

Which of the following is the most major constituents of air pollutants? (A) Oxides of sulphur (B) Oxides of nitrogen (C) Carbon monoxide (D) Hydrogen sulphide

Description : Which of the following is the most major constituents of air pollutants? (A) Oxides of sulphur (B) Oxides of nitrogen (C) Carbon monoxide (D) Hydrogen sulphide

Last Answer : (A) Oxides of sulphur

Which of the following statement is not correct with respect to alcohols as alternate fuel in IC engines a) anti-knock characteristics of alcohol is poor b) alcohol contains about half the heat energy of gasoline/litre c) alcohol does not vaporize as easily as gasoline d) alcohols are corrosive in nature

Description : Which of the following statement is not correct with respect to alcohols as alternate fuel in IC engines a) anti-knock characteristics of alcohol is poor b) alcohol contains about half the heat ... /litre c) alcohol does not vaporize as easily as gasoline d) alcohols are corrosive in nature

Last Answer : Answer: a Explanation: Anti-knock characteristics of alcohol is good.

Bitumen emulsion is (A) A liquid containing bitumen in suspension (B) A paint (C) Used as anti-corrosive paint (D) All the above

Description : Bitumen emulsion is (A) A liquid containing bitumen in suspension (B) A paint (C) Used as anti-corrosive paint (D) All the above

Last Answer : Answer: Option D

Major portion of the earth's crust is mainly constituted by – (1) Oxygen and Iron (2) Oxygen and Silicon (3) Silicon and Iron (4) Silicon and Aluminium

Description : Major portion of the earth's crust is mainly constituted by – (1) Oxygen and Iron (2) Oxygen and Silicon (3) Silicon and Iron (4) Silicon and Aluminium

Last Answer : (2) Oxygen and Silicon Explanation: Oxygen is the most abundant element in the earth's crust, comprising 46.6% or the crust by weight. Silicon 28%, aluminum 8.2%, iron 5.6%, calcium 4.2% ... Given the abundance of oxygen and silicon, the silicates are the most abundant minerals in the earth's crust.

Major portion of the earth’s crust is mainly constituted by - (1) Oxygen and Iron (2) Oxygen and Silicon (3) Silicon and Iron (4) Silicon and Aluminium

Description : Major portion of the earth’s crust is mainly constituted by - (1) Oxygen and Iron (2) Oxygen and Silicon (3) Silicon and Iron (4) Silicon and Aluminium

Last Answer : (2) Oxygen and Silicon Explanation: Oxygen is the most abundant element in the earth’s crust, comprising 46.6% or the crust by weight. Silicon 28%, aluminum 8.2%, iron 5.6%, calcium 4.2%, sodium 2.5%, magnesium 2.4%, potassium, 2.0%, and titanium 0.61% also comprise the crust.

Major portion of the earth’s crust is mainly constituted by (1) Oxygen and Iron (2) Oxygen and Silicon (3) Silicon and Iron (4) Silicon and Aluminium

Description : Major portion of the earth’s crust is mainly constituted by (1) Oxygen and Iron (2) Oxygen and Silicon (3) Silicon and Iron (4) Silicon and Aluminium

Last Answer : Oxygen and Silicon

The most distinguished property of malleable cast iron is its high (A) Ductility (B) Hardness (C) Malleability (D) None of these

Description : The most distinguished property of malleable cast iron is its high (A) Ductility (B) Hardness (C) Malleability (D) None of these

Last Answer : (A) Ductility

What was the dilemma that the French had regarding imparting education to Vietnamese? -SST 10th

Description : What was the dilemma that the French had regarding imparting education to Vietnamese? -SST 10th

Last Answer : French colonisation adopted the idea of a civilising mission'. They wanted to educate the native' to civilise them. They were also doing so because they required educated local labour ... educated Vietnamese.So they opposed policies that would give the Vietnamese full access to French education.

Suppose a child is devoid of social efficiency then what measures will you adopt to overcome this difficulty? Options: A) Imparting him training to overcome the difficulty B) Mentioning the positive aspects of it C) Giving threats of its deficiency D) Admitting the child in a clinic

Description : Suppose a child is devoid of social efficiency then what measures will you adopt to overcome this difficulty? Options: A) Imparting him training to overcome the difficulty B) Mentioning the positive aspects of it C) Giving threats of its deficiency D) Admitting the child in a clinic

Last Answer : Imparting him training to overcome the difficulty

Universities having central campus for imparting education are called (A) Central Universities (B) Deemed Universities (C) Residential Universities (D) Open Universities

Description : Universities having central campus for imparting education are called (A) Central Universities (B) Deemed Universities (C) Residential Universities (D) Open Universities

Last Answer : Answer: A A Central University or a Union University in India is established by Act of Parliament and are under the purview of the Department of Higher Education in the Union Human Resource ... list of central universities published by the UGC includes 46 central universities as on 20 May 2015.

Addition of lead, sulphur and phosphorus to low carbon steel helps in improving its (A) Corrosion resistance (B) Tensile strength (C) Machinability (D) Compressive strength

Description : Addition of lead, sulphur and phosphorus to low carbon steel helps in improving its (A) Corrosion resistance (B) Tensile strength (C) Machinability (D) Compressive strength

Last Answer : (C) Machinability

A good coking coal should have high __________ content. (A) Ash (B) Sulphur & phosphorus (C) Moisture (D) None of these

Description : A good coking coal should have high __________ content. (A) Ash (B) Sulphur & phosphorus (C) Moisture (D) None of these

Last Answer : (D) None of these