__________ is added in low carbon steel to raise its yield point. (A) Sulphur (B) Phosphorous (C) Silicon (D) Manganese

__________ is added in low carbon steel to raise its yield point.
(A) Sulphur
(B) Phosphorous
(C) Silicon
(D) Manganese
by

1 Answer

Answer :

(D) Manganese
by

Related questions

Manganese is added in low carbon steel to A. Make the steel tougher and harder B. Raise the yield point C. Make the steel ductile and of good bending qualities D. All of the above

Description : Manganese is added in low carbon steel to A. Make the steel tougher and harder B. Raise the yield point C. Make the steel ductile and of good bending qualities D. All of the above

Last Answer : C. Make the steel ductile and of good bending qualities

The yield point phenomenon observed in annealed low carbon steel is due to the presence of the following element. (A) Silicon (B) Carbon (C) Phosphorous (D) Chromium

Description : The yield point phenomenon observed in annealed low carbon steel is due to the presence of the following element. (A) Silicon (B) Carbon (C) Phosphorous (D) Chromium

Last Answer : Option B

Which of the following exercises most powerful influence on the mechanical properties of steel? (A) Manganese (B) Carbon (C) Phosphorous (D) Silicon

Description : Which of the following exercises most powerful influence on the mechanical properties of steel? (A) Manganese (B) Carbon (C) Phosphorous (D) Silicon

Last Answer : (B) Carbon

Addition of __________ to steel does not help in improving its machinability. (A) Sulphur (B) Silicon (C) Lead (D) Phosphorous

Description : Addition of __________ to steel does not help in improving its machinability. (A) Sulphur (B) Silicon (C) Lead (D) Phosphorous

Last Answer : (B) Silicon

Addition of __________ to steel does not help in improving its machinability. (A) Sulphur (B) Silicon (C) Lead (D) Phosphorous

Description : Addition of __________ to steel does not help in improving its machinability. (A) Sulphur (B) Silicon (C) Lead (D) Phosphorous

Last Answer : Option B

__________ is the most important element, which controls the physical properties of steel. (A) Manganese (B) Silicon (C) Carbon (D) Vanadium

Description : __________ is the most important element, which controls the physical properties of steel. (A) Manganese (B) Silicon (C) Carbon (D) Vanadium

Last Answer : (C) Carbon

The yield strength and tensile strength of low carbon steel may be improved by the addition of (A) Manganese (B) Chromium (C) Nickel (D) Vanadium

Description : The yield strength and tensile strength of low carbon steel may be improved by the addition of (A) Manganese (B) Chromium (C) Nickel (D) Vanadium

Last Answer : Answer: Option D

Work hardenable alloy steel used to make the bucket wheel excavators, blades of bulldozers and other earth moving equipments contain iron, carbon and (A) Manganese (B) Silicon (C) Nickel (D) Chromium

Description : Work hardenable alloy steel used to make the bucket wheel excavators, blades of bulldozers and other earth moving equipments contain iron, carbon and (A) Manganese (B) Silicon (C) Nickel (D) Chromium

Last Answer : (A) Manganese

Which of the following gradients exerts maximum influence on properties of steel? (A) Iron (B) Carbon (C) Manganese (D) Sulphur

Description : Which of the following gradients exerts maximum influence on properties of steel? (A) Iron (B) Carbon (C) Manganese (D) Sulphur

Last Answer : Answer: Option B

The element used in the manufacture of safety matches is – (1) Phosphorous (2) Magnesium (3) Silicon (4) Sulphur

Description : The element used in the manufacture of safety matches is – (1) Phosphorous (2) Magnesium (3) Silicon (4) Sulphur

Last Answer : (1) Phosphorous Explanation: One end of a match is coated with a material that can be ignited by frictional heat generated by striking the match against a suitable surface. The coated end ... ," contains either phosphorus or phosphorus sesquisulfide as the active ingredient and gelatin as a binder.

The element used in the manufacture of safety matches is (1) Phosphorous (2) Magnesium (3) Silicon (4) Sulphur

Description : The element used in the manufacture of safety matches is (1) Phosphorous (2) Magnesium (3) Silicon (4) Sulphur

Last Answer : Phosphorous

A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Description : A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Last Answer : (A) Sulphur & phosphorous content

Addition of small amount of __________ to grey cast iron is done to produce nodular grey cast iron. (A) Manganese (B) Phosphorous (C) Magnesium (D) Chromium

Description : Addition of small amount of __________ to grey cast iron is done to produce nodular grey cast iron. (A) Manganese (B) Phosphorous (C) Magnesium (D) Chromium

Last Answer : Option C

Nickel and __________ are the alloying element added in steel to increase its toughness. (A) Molybdenum(B) Chromium(C) Vanadium(D) Silicon

Description : Nickel and __________ are the alloying element added in steel to increase its toughness. (A) Molybdenum (B) Chromium (C) Vanadium (D) Silicon

Last Answer : Option D

High amount of sulphur and phosphorous in coke causes (A) Decrease in its calorific value (B) Increase in its strength(C) Brittleness of steel made by using it(D) None of these

Description : High amount of sulphur and phosphorous in coke causes (A) Decrease in its calorific value (B) Increase in its strength (C) Brittleness of steel made by using it (D) None of these

Last Answer : (C) Brittleness of steel made by using it

Silicon crystal can be converted to p-type semi-conductor by doping with (A) Phosphorous (B) Nitrogen (C) Carbon (D) Boron

Description : Silicon crystal can be converted to p-type semi-conductor by doping with (A) Phosphorous (B) Nitrogen (C) Carbon (D) Boron

Last Answer : Option D

The 'transition temperature' for ductile to brittle behaviour of steel increases with increase in the __________ content in steel. (A) Carbon (B) Manganese (C) Both 'a' nor 'b' (D) Neither 'a' nor 'b'

Description : The 'transition temperature' for ductile to brittle behaviour of steel increases with increase in the __________ content in steel. (A) Carbon (B) Manganese (C) Both 'a' nor 'b' (D) Neither 'a' nor 'b'

Last Answer : (A) Carbon

Brittleness induced due to the presence of sulphur in steel can be reduced by adding (A) Manganese (B) Magnesium (C) Vanadium (D) Copper

Description : Brittleness induced due to the presence of sulphur in steel can be reduced by adding (A) Manganese (B) Magnesium (C) Vanadium (D) Copper

Last Answer : (A) Manganese

Brittleness induced due to the presence of sulphur in steel can be reduced by adding (A) Manganese (B) Magnesium (C) Vanadium (D) Copper

Description : Brittleness induced due to the presence of sulphur in steel can be reduced by adding (A) Manganese (B) Magnesium (C) Vanadium (D) Copper

Last Answer : r: Option A

Yield of elemental phosphorous from rock phosphate is about __________ percent. (A) 1-2 (B) 15-25 (C) 40-45 (D) 60-65

Description : Yield of elemental phosphorous from rock phosphate is about __________ percent. (A) 1-2 (B) 15-25 (C) 40-45 (D) 60-65

Last Answer : (B) 15-25

Iron ore may contain (A) Carbon (B) Silicon (C) Phosphorus and manganese (D) All the above

Description : Iron ore may contain (A) Carbon (B) Silicon (C) Phosphorus and manganese (D) All the above

Last Answer : Answer: Option D

Weld decay occurs in which of the following steel types? a) Carbon/Manganese b) Low alloy c) Any stainless steel d) Austenitic stainless steels

Description : Weld decay occurs in which of the following steel types? a) Carbon/Manganese b) Low alloy c) Any stainless steel d) Austenitic stainless steels

Last Answer : d) Austenitic stainless steels

Which of the following finds the least commercial use? (A) Pure iron (B) High silicon iron (C) Low carbon steel (D) High carbon steel

Description : Which of the following finds the least commercial use? (A) Pure iron (B) High silicon iron (C) Low carbon steel (D) High carbon steel

Last Answer : (A) Pure iron

In a good rimming steel (A) Carbon and silicon should be low (B) Silicon should be low but carbon should be high (C) Both silicon & carbon should be high (D) Silicon should be high but carbon should be low

Description : In a good rimming steel (A) Carbon and silicon should be low (B) Silicon should be low but carbon should be high (C) Both silicon & carbon should be high (D) Silicon should be high but carbon should be low

Last Answer : (A) Carbon and silicon should be low

Ball bearings are normally made of __________ steel. (A) High speed (B) High carbon (C) Chrome (D) Silicon

Description : Ball bearings are normally made of __________ steel. (A) High speed (B) High carbon (C) Chrome (D) Silicon

Last Answer : (C) Chrome

Which one of the following nonmetals shows allotropy in the liguid state? (1) Carbon (2) Sulphur (3) Phosphorous (4) Bromine

Description : Which one of the following nonmetals shows allotropy in the liguid state? (1) Carbon (2) Sulphur (3) Phosphorous (4) Bromine

Last Answer : (2) Sulphur Explanation: Sulphur is a non-metal that shows allotropy in the liquid state. If sulphur is heated slowly the changes between the different forms can be observed. These changes are in the ... of cold water, plastic sulphur is formed. This is an elastic, rubber-like form of sulphur.

The non-metal used in batteries is a) phosphorous b)nitrogen c) carbon d)sulphur

Description : The non-metal used in batteries is a) phosphorous b)nitrogen c) carbon d)sulphur

Last Answer : c) carbon

Which one of the following nonmetals shows allotropy in the liquid state? (1) Carbon (2) Sulphur (3) Phosphorous (4) Bromine

Description : Which one of the following nonmetals shows allotropy in the liquid state? (1) Carbon (2) Sulphur (3) Phosphorous (4) Bromine

Last Answer : Sulphur

Acid rain is caused due to pollution of atmosphere by (1) oxides of carbon and nitrogen (2) oxides of nitrogen and sulphur (3) oxides of nitrogen and phosphorous (4) None of these

Description : Acid rain is caused due to pollution of atmosphere by (1) oxides of carbon and nitrogen (2) oxides of nitrogen and sulphur (3) oxides of nitrogen and phosphorous (4) None of these

Last Answer : oxides of nitrogen and sulphur

Weld decay is caused by the formation of a compound with carbon. The other element in this compound is: a) Manganese b) Sulphur c) Chromium d) Nickel

Description : Weld decay is caused by the formation of a compound with carbon. The other element in this compound is: a) Manganese b) Sulphur c) Chromium d) Nickel

Last Answer : c) Chromium

Addition of lead, sulphur and phosphorus to low carbon steel helps in improving its (A) Corrosion resistance (B) Tensile strength (C) Machinability (D) Compressive strength

Description : Addition of lead, sulphur and phosphorus to low carbon steel helps in improving its (A) Corrosion resistance (B) Tensile strength (C) Machinability (D) Compressive strength

Last Answer : (C) Machinability

Solute atoms which cause yield point phenomenon in mild steel are/is (A) Aluminium (B) Boron (C) Carbon (D) Nitrogen

Description : Solute atoms which cause yield point phenomenon in mild steel are/is (A) Aluminium (B) Boron (C) Carbon (D) Nitrogen

Last Answer : (C) Carbon

Psychotic symptoms and parkinsonism like symptoms develop due to inhalation poisoning of (A) Manganese (B) Phosphorous (C) Magnesium (D) Zinc

Description : Psychotic symptoms and parkinsonism like symptoms develop due to inhalation poisoning of (A) Manganese (B) Phosphorous (C) Magnesium (D) Zinc

Last Answer : Answer : A

When the steel is subjected to normalising, its __________ decreases. (A) Yield point (B) Ductility (C) Ultimate tensile strength (UTS)

Description : When the steel is subjected to normalising, its __________ decreases. (A) Yield point (B) Ductility (C) Ultimate tensile strength (UTS)

Last Answer : (B) Ductility

Transformer cores are laminated with (A) Low carbon steel. (B) Silicon sheet steel. (C) Nickel alloy steel. (D) Chromium sheet steel.

Description : Transformer cores are laminated with (A) Low carbon steel. (B) Silicon sheet steel. (C) Nickel alloy steel. (D) Chromium sheet steel.

Last Answer : (B) Silicon sheet steel.

Bearings subjected to light load are made of (A) White metal (B) Phosphorous bronze (C) Monel (D) Silicon bronze

Description : Bearings subjected to light load are made of (A) White metal (B) Phosphorous bronze (C) Monel (D) Silicon bronze

Last Answer : (B) Phosphorous bronze

In low temperature carbonisation of coal as compared to high temperature carbonisation __________ produced is less. (A) Difference in gross & net calorific value of the coke oven gas (B) Free carbon content in tar (C) Yield percentage of coke (D) Yield of ammonia present in coke oven gas

Description : In low temperature carbonisation of coal as compared to high temperature carbonisation __________ produced is less. (A) Difference in gross & net calorific value of the coke oven gas (B) Free carbon content in tar (C) Yield percentage of coke (D) Yield of ammonia present in coke oven gas

Last Answer : (A) Difference in gross & net calorific value of the coke oven gas

Duralumin is an alloy of (A) Aluminium, copper and manganese (B) Aluminium, nickel and silicon (C) Aluminium and nickel (D) None of these

Description : Duralumin is an alloy of (A) Aluminium, copper and manganese (B) Aluminium, nickel and silicon (C) Aluminium and nickel (D) None of these

Last Answer : (A) Aluminium, copper and manganese

Austenitic manganese steel used for making jaws of crushing machines contains about __________ percent manganese. (A) 1.5-2 (B) 3.5-4.5 (C) 7-9 (D) 12-14

Description : Austenitic manganese steel used for making jaws of crushing machines contains about __________ percent manganese. (A) 1.5-2 (B) 3.5-4.5 (C) 7-9 (D) 12-14

Last Answer : (D) 12-14

Diamond is an allotrope of (a) Tin (b) Silicon (c) Sulphur (d) Carbon

Description : Diamond is an allotrope of (a) Tin (b) Silicon (c) Sulphur (d) Carbon

Last Answer : Ans:(d)

In vulcanization, natural rubber is heated with- (1) Carbon (2) Sulphur (3) Silicon (4) Phosphorus

Description : In vulcanization, natural rubber is heated with- (1) Carbon (2) Sulphur (3) Silicon (4) Phosphorus

Last Answer : (2) Sulphur Explanation: Vulcanization of rubber is a process of improvement of the rubber elasticity and strength by heating it in the presence of sulfur, which results in three-dimensional crosslinking of the chain rubber molecules (polyisoprene) bonded to each other by sulfur atoms.

Brittleness of cold is due to an excess of (A) Sulphur (B) Carbon (C) Phosphorus (D) Silicon

Description : Brittleness of cold is due to an excess of (A) Sulphur (B) Carbon (C) Phosphorus (D) Silicon

Last Answer : Answer: Option C

Red short iron cracks when bent due to the presence of (A) Sulphur (B) Carbon (C) Phosphorus (D) Silicon

Description : Red short iron cracks when bent due to the presence of (A) Sulphur (B) Carbon (C) Phosphorus (D) Silicon

Last Answer : Answer: Option A

__________ is required more for leafy crops. (A) Nitrogen (B) Phosphorous (C) Potassium (D) Carbon

Description : __________ is required more for leafy crops. (A) Nitrogen (B) Phosphorous (C) Potassium (D) Carbon

Last Answer : (A) Nitrogen

Which of the following does not come under the category of ‘primary nutrient' for plant growth? (A) Potassium (B) Nitrogen (C) Phosphorous (D) Sulphur

Description : Which of the following does not come under the category of ‘primary nutrient' for plant growth? (A) Potassium (B) Nitrogen (C) Phosphorous (D) Sulphur

Last Answer : (D) Sulphur

Which of the following is not a measure component necessarily to be present in fertilisers? (A) Nitrogen (B) Potassium (C) Phosphorous (D) Sulphur

Description : Which of the following is not a measure component necessarily to be present in fertilisers? (A) Nitrogen (B) Potassium (C) Phosphorous (D) Sulphur

Last Answer : (D) Sulphur

________ content of the phosphate rock is the pollutant of primary interest in a phosphatic fertiliser plant. (A) Calcium (B) Fluorine (C) Phosphorous (D) Sulphur

Description : ________ content of the phosphate rock is the pollutant of primary interest in a phosphatic fertiliser plant. (A) Calcium (B) Fluorine (C) Phosphorous (D) Sulphur

Last Answer : (B) Fluorine

What is done to raise the dough while making bread? (a) Alcohol is added (b) yeast is added (c) Carbon dioxide is passed (d) Air is passed

Description : What is done to raise the dough while making bread? (a) Alcohol is added (b) yeast is added (c) Carbon dioxide is passed (d) Air is passed

Last Answer : Ans:(b)

Which material is suitable for shaft material? a. High speed steel b. Stainless steel or high carbon steel c. Grey cast iron d. Steel having approx. 0.4% carbon and 0.8% manganese

Description : Which material is suitable for shaft material? a. High speed steel b. Stainless steel or high carbon steel c. Grey cast iron d. Steel having approx. 0.4% carbon and 0.8% manganese

Last Answer : d. Steel having approx. 0.4% carbon and 0.8% manganese

Which of the following is used in pencils? A.Graphite B.Silicon C.Charcoal D.Phosphorous -Science

Description : Which of the following is used in pencils? A.Graphite B.Silicon C.Charcoal D.Phosphorous -Science

Last Answer : answer is A. Graphite