Define modulation index of FM.

1 Answer

Answer :

Modulation index of FM is defined as the ratio of the frequency deviation to the modulating frequency.

image

Related questions

Description : Compare narrow band FM with wide-band FM w.r.t. following points. (i) Modulation index (ii) Maximum deviation (iii)Range of modulating frequency (iv)Application

Last Answer : Sr. No Parameters Narrow band FM Wide band FM 1 Modulation index Less than or slightly greater than 1 Greater than 1  2 Maximum deviation ... like police wireless, ambulance etc. Entertainment broadcasting can be used for high quality music transmission 

Description : Draw and label PLL based FM detector.

Last Answer : Draw and label PLL based FM detector.

Description : Write the IF value of (i) FM ratio recevier. (ii) MW band AM.

Last Answer : (i) 10.7 Mhz (ii) 455 Khz

Description : Define fading w.r.t. wave propagation. 

Last Answer : Fading: The fluctuation in signal strength at a receiver, which is mainly due to the interference of two waves which left the same source but arrived at the destination by different paths, is known as fading. 

Description : Define the term signal to noise ratio. 

Last Answer : Signal to Noise ratio: The ratio of the strength of an electrical or other signal carrying information to that of unwanted interference is called as signal to noise ratio. OR Signal to Noise Ratio is defined as ... the same point. S/N=Ps/Pn where,Ps=Signal Power Pn=Noise Power at the same point

Description : Draw the practical AM diode detector circuit. Sketch its input and output waveforms. 

Last Answer : Practical AM diode detector 1. Skip distance:-Skip distance is defined as the shortest distance from a transmitter, measured along the surface of earth at which a sky wave of fixed frequency ... had taken place from a surface located at a greater height, called Virtual height of this layer.

Description : Explain Tropospheric scatter propagation with sketch.

Last Answer : As the name implies, troposcatter uses the troposphere as the region that affects the radio signals being transmitted, returning them to Earth so that they can be received by the ... of "blurring" the overall received signal and this makes high speed data transmissions difficult.

Description : Write any one application of the following range. 1. Radio frequency 2. IR frequency 3. Medium frequency 

Last Answer : Application of 1. Radio Frequency- Radar signals and communication 2. IR Frequency- LED, Laser, TV remote, Used for directed links e.g. to connect different buildings via laser links. 3. Medium Frequency- AM broadcasting.

Description : A 400 W carrier is amplitude modulated to a depth of 75%.Calculate the total power in AM wave. (i) Explain the types of noise in a communication system. (ii) Compare simplex and duplex mode of communication.

Last Answer : (i) Noise: Noise is any spurious or undesired disturbances that mask the received signal in a communication system. a) Atmospheric Noise: Atmospheric Noise is also known as static noise which is the ... remote control ExamplesWalkytalky,telephone,mobile,Radar, FAX,Pager 4

Description : Derive a mathematical expression for AM wave.

Last Answer : Derive a mathematical expression for AM wave.

Description : Explain the working of half dipole antenna with its radiation pattern. 

Last Answer : Half wave dipole antenna diagram Explanation: 1. It is a resonant antenna 2. It is exact half wavelength (λ /2) long & open circuited at one end. 3. The dipole ... waves exist. Hence radiation pattern is bidirectional. The radiation pattern of half wave dipole antenna is -

Description : Compare sky wave and space wave propagation w.r.t. following points. (i) Frequency range (ii) Effect of fading (iii)Polarization (iv)Application

Last Answer : Sr. No  Parameters Sky Wave Propagation Space Wave Propagation 1 Frequency range 3 MHz to 30 MHz  Above 30 MHz 2 Effect of fading Problem of fading is ... horizontally Polarized 4 Application RadioBroadcasting (SW Range) Used for TV and FM broadcasting

Description : Draw the block diagram of AM. Super heterodyne ratio receiver and state the function of each block

Last Answer : AM super heterodyne receiver works on the principle of super heterodyning. In the super heterodyne receiver, the incoming signal voltage is combined with a Signal generated in the receiver. The ... constant output level at the speaker even though the signal strength at the antenna varies.

Description : Explain Electromagnetic spectrum. 

Last Answer : The information signal should be first converted into an electromagnetic signal before transmission because the wireless transmission takes place using electromagnetic waves. The electromagnetic waves are oscillations which ... This entire range of frequency of EM waves is called EM spectrum.

Description : Explain structure of rectangular microstrip patch antenna with its radiation pattern. 

Last Answer : In telecommunication, a microstrip antenna (also known as a printed antenna) usually means an antenna fabricated using microstrip techniques on a printed circuit board (PCB).It is a kind of ... microstrip transmission line with equivalent loads on either end to represent the radiation loss.

Description : Explain why reception for high frequency band is better during night time.

Last Answer : In sky wave propagation, the transmitted signal travels into the upper atmosphere where it is bent or reflected back to earth. This bending or reflection of signal takes place due to the presence ... reflected signal and hence the reception for high frequency band is better during night time.

Description : Sketch AM signal in (1)Time domain (2)Frequency domain.

Last Answer : AM in Time domain AM in frequency domain

Description : Explain the concept of De-emphasis with neat diagram. 

Last Answer : In the De-emphasis circuit, by reducing the amplitude level of the received high frequency signal by the same amount as the increase in pre-emphasis is termed as De-emphasis. The pre- ... de-emphasis circuit is a low pass filter or integrator which allows only low frequencies to pass. 

Description : Draw the basic block diagram of Electronic communication system. State the function of transmitter.

Last Answer : Block diagram: Transmitter The function of the transmitter is to process the electrical signal from different aspects. For example in radio broadcasting the electrical signal obtained from sound ... the message signal are done just to ease the transmission of the signal through the channel.

Description : Sketch the radiation pattern of Yagi-Uda antenna.

Last Answer : Sketch the radiation pattern of Yagi-Uda antenna.

Description : Define modulation index in FM. What is maximum value of deviation ratio.

Last Answer : Modulation Index of FM: It is defined as the ratio of Frequency Deviation (δ) to the modulating signal frequency (fm). (OR)  

Description : What is meant by the term modulation index? A. The processor index. B. The ratio between the deviation of a frequency modulated signal and the modulating frequency. C. The FM signal-to-noise ratio. D. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

Last Answer : B. The ratio between the deviation of a frequency modulated signal and the modulating frequency.

Description : Which determines the number of sideband components of FM? A. Modulation frequency B. Modulation index C. Carrier frequency D. All of these

Last Answer : B. Modulation index

Description : Give the expression for modulation index for AM and FM.

Last Answer : 1.Modulation index for AM ma=Vm / Vc Where Vm is modulating voltage Vc is the carrier voltage 2.Modulation index for FM mf=δ /fm where δ is the deviation fm is the modulating frequency

Description : Differentiate between AM and FM on the basis of: (i) Definition (ii) Bandwidth (iii) Modulation Index (iv) Application

Last Answer : Compare AM and FM on the basis of i)Definition ii)Bandwidth iii) Wave propogation iv)Number of sidebands

Description : Compare AM with FM with respect to following points: a) Definition. b) Modulation index. c) Bandwidth. d) Side band.

Last Answer : Parameters AM FM Definition It is the process in which the amplitude of carrier signal is varied in accordance with the instantaneous value of modulating signal keeping frequency and ... frequency deviation. Side band There are two sidebands Infinite number of sideband

Description : An FM signal with modulation index mƒ is passed through a frequency tripler. The modulation index of the output signal will be (1) mƒ (2) 3mƒ (3) 9mƒ (4) 27mƒ

Last Answer : An FM signal with modulation index mƒ is passed through a frequency tripler. The modulation index of the output signal will be 3mƒ

Description : The modulation index of a FM Signal having modulating frequency 2 KHz and Max deviation is 10 KHz, is: -  a) 2 b) 5 c) 3 d) 4

Last Answer : The modulation index of a FM Signal having modulating frequency 2 KHz and Max deviation is 10 KHz, is: - 5

Description : What modulation is normally used with digital data? A. AM B. FM C. SSB D. QPSK

Last Answer : D. QPSK

Description : What type of modulation is used on voice and video signals? A. AM B. FM C. SSB D. QPSK

Last Answer : B. FM

Description : What is the deviation ratio for an FM-phone signal having a maximum frequency swing of plus or minus 5 kHz and accepting a maximum modulation rate of 3kHz? A. 60 B. 0.16 C. 0.6 D. 1.66

Last Answer : D. 1.66

Description : Both frequency and phase modulation utilize ________ modulation A. Phase B. AM and FM C. Digital D. Angle

Last Answer : D. Angle

Description : The carrier swing necessary to provide 80% modulation in the FM broadcasting band is __________. A. 150 kHz B. 120 kHz C. 60 kHz D. 75 kHz

Last Answer : B. 120 kHz

Description : How is the degree of modulation expressed in an fm system?

Last Answer : As the ratio of the frequency deviation to the maximum frequency deviation allowable.

Description : Define modulation? State the desirable value of modulation index of AM.

Last Answer : Modulation: It is the process in which any of these Parameters (Amplitude, Frequency, Phase) of high frequency signal (carrier signal) are varied in accordance with low frequency signal(modulating signal) For an AM, modulation index range is 0 to 1.

Description : Define modulation index in AM and give its formula.

Last Answer : In AM wave, the modulation index (m) is defined as the ratio of the amplitude of the modulating signal (Vm ) to the amplitude of carrier signal (Vc). m = Vm / Vc

Description : The antenna current is doubled when the modulation index is doubled in ______ AM system. A. A5C B. A3J C. A3 D. A3H

Last Answer : B. A3J

Description : If the modulation index of an AM wave is doubled, the antenna current is also doubled, the AM system being used is A. A5C B. A3J C. A3H D. A3

Last Answer : B. A3J

Description : What is the difference between phase and frequency modulation? A. Is purely theoretical because they are the same in practice B. Lies in poorer audio response of phase modulation C. Lies in the different definitions of the modulation index D. Is too great to make two systems compatible

Last Answer : C. Lies in the different definitions of the modulation index

Description : i) State the significance of modulation index in AM transmission. ii) Explain the effect of modulation index on AM wave with waveforms.

Last Answer : Significance of modulation index in AM transmission  It is used to determine the strength and quality of transmitted signal. If the modulation index is small, then the amount of variation in ... amplitude part of its information is lost in the process of modulation which is undesirable.

Description : In amplitude modulation AM, if modulation index is more than 100% then: (1) Power of the wave increases. (2) Efficiency of transmission increases. (3) The wave gets distorted. (4) Bandwidth increases

Last Answer : In amplitude modulation AM, if modulation index is more than 100% then: The wave gets distorted.

Description : If the radiated power of AM transmitter is 10 KW, the power in the carrier for modulation index of 0.6 is nearly:  (1) 8.24 KW (2) 9.26 KW (3) 8.47 KW (4) 9.6 KW

Last Answer : If the radiated power of AM transmitter is 10 KW, the power in the carrier for modulation index of 0.6 is nearly: 8.47 KW.

Description : Define Delta modulation. 

Last Answer : Delta modulation is a technique in which derivative of the signal is quantized. The delta modulation shows slope overload for fast input signals and their performance is dependent on input signal frequency.

Description : Define FSK modulation.

Last Answer : FSK is a type of frequency modulation ,in which the binary data or code is transmitted by means of a carrier frequency that is shifted between two fixed frequency namely mark(logic1) and space frequency(logic 0).

Description : Define modulation.

Last Answer : The process of varying one or more characteristics of an optical signal to encode and convey information.

Description : Define pulse modulation. State its types. 

Last Answer : Pulse Modulation - consists essentially of sampling analog information signals and then converting those samples into discrete pulses. OR It consists essentially of sampling analog information signals and then converting those ... PAM - PWM - PPM  ii) Digital Pulse Modulation - PCM - DM - ADM 

Description : Are your radio stations that FM is religious and country music and AM urban and rock and roll?

Last Answer : Just the opposite here. Music (top 40, oldies, etc.,) are all on FM because the sound is so much cleaner and immune to static. AM gets sports, preachers, and talk radio, because sound quality isn’t that important.

Description : Do you listen to free, over-the-airwaves, no internet required, FM radio, with your smartphone?

Last Answer : No, I don’t. I understand that they use your headphones (and more specifically the wire to the headphones) as an antenna, and I don’t use headphones. And I am never far from and FM radio; either in my house or my car.

Description : Can you suggest a good FM/AM radio?

Last Answer : Car radios are pretty good at picking up weak signals. In my house, I have a separate tuner and amplifier, and I can’t pick up signals that my car radio picks up with ease.

Description : Are you ready for the end of FM radio?

Last Answer : Absolutely. I am always surprised that it is still a thing.