Description : What is meant by the term modulation index? A. The processor index. B. The ratio between the deviation of a frequency modulated signal and the modulating frequency. C. The FM signal-to-noise ratio. D. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.
Last Answer : B. The ratio between the deviation of a frequency modulated signal and the modulating frequency.
Description : ECE Board Exam March 1996 The letter-number designation B8E is a form of modulation also known as ___________. A. pilot carrier system B. independent sideband emission C. lincomplex D. vestigial sideband transmission
Last Answer : B. independent sideband emission
Description : The carrier swing necessary to provide 80% modulation in the FM broadcasting band is __________. A. 150 kHz B. 120 kHz C. 60 kHz D. 75 kHz
Last Answer : B. 120 kHz
Description : Type of modulation used in TV broadcast visual transmitter. A. Pulse modulation B. DSBFC C. Vestigial sideband D. SSBFC
Last Answer : C. Vestigial sideband
Description : In the designation of bandwidth and emission, what letter in the first symbol represents a double-sideband type of modulation? A. A B. B C. C D. H
Last Answer : A. A
Description : For 100% modulation, power in each sideband is ________ of that of carrier? a) 50% b) 70% c) 60% d) 25%
Last Answer : Ans: D
Description : How many sidebands are present in the J3E mode? A. Two sidebands and a carrier B. One upper sideband C. One lower sideband D. Two carriers and one sideband
Last Answer : B. One upper sideband
Description : What is the emission designation of a single sideband reduced carrier signal? A. H3E B. J3E C. R3E D. B8E
Last Answer : C. R3E
Description : Refers to the first symbol in an emission designation with an amplitude modulated main carrier represented by letter H. A. Single sideband suppressed carrier B. Double sideband full carrier C. Independent sideband D. Double sideband
Last Answer : B. Double sideband full carrier
Description : A form of single sideband emission where the degree of carrier suppression enable the carrier to be reconstituted and be used for demodulation. A. Half carrier single sideband emission B. Full carrier single sideband emission C. Reduced carrier single sideband emission D. Double sideband emission
Last Answer : C. Reduced carrier single sideband emission
Description : A single sideband emission in which the degree of carrier suppression enables the carrier to be reconstituted and to be used for demodulation. A. Reduce carrier single sideband emission ... single sideband emission C. Full carrier single sideband emission D. Standard single sideband emission
Last Answer : A. Reduce carrier single sideband emission
Description : What is the deviation ratio for an FM-phone signal having a maximum frequency swing of plus or minus 5 kHz and accepting a maximum modulation rate of 3kHz? A. 60 B. 0.16 C. 0.6 D. 1.66
Last Answer : D. 1.66
Description : Both frequency and phase modulation utilize ________ modulation A. Phase B. AM and FM C. Digital D. Angle
Last Answer : D. Angle
Description : What is the channel number of an FM station with a carrier frequency of 99.5 MHz? A. 256 B. 258 C. 257 D. 259
Last Answer : B. 258
Description : What is the term used to describe a spread spectrum communications system where the center frequency if a conventional carrier is altered many time per second in accordance with a pseudo ... hopping B. Direct sequence C. Time-domain frequency modulation D. Frequency compandored spread spectrum
Last Answer : A. Frequency hopping
Description : What is meant by the term deviation ratio? A. The ratio of the carrier center frequency to the audio modulating frequency B. The ratio of the highest audio modulating frequency to the ... audio modulation frequency D. The ratio of the audio modulating frequency to the center carrier frequency
Last Answer : C. The ratio of the maximum carrier frequency deviation to the highest audio modulation frequency
Description : This is referred to a product of simultaneous frequency and amplitude modulation or a carrier frequency variation which produces unwanted distortion. A. Absorption modulation B. Simultaneous modulation C. Dynamic instability D. Series modulation
Last Answer : C. Dynamic instability
Description : It is an average power of a radio transmitter supplied to the antenna transmission line taken during a long sufficient interval of time and compared with the lowest frequency encountered in the modulation ... operating conditions. A. Carrier power B. Rated power C. Mean power D. Peak envelop power
Last Answer : C. Mean power
Description : Referred to as an average power from the radio transmitter supplied to the antenna transmission line taken during one radio frequency cycle under no modulation. A. Carrier power B. Rated power C. Peak envelop power D. Mean power
Last Answer : A. Carrier power
Description : Average power of a radio transmitter supplied to the antenna transmission line by a transmitter during one radio frequency cycle taken under the condition of no modulation. A. Peak envelop power B. Rated power C. Carrier power D. Mean power
Last Answer : C. Carrier power
Description : Compare narrow band FM with wide-band FM w.r.t. following points. (i) Modulation index (ii) Maximum deviation (iii)Range of modulating frequency (iv)Application
Last Answer : Sr. No Parameters Narrow band FM Wide band FM 1 Modulation index Less than or slightly greater than 1 Greater than 1 2 Maximum deviation ... like police wireless, ambulance etc. Entertainment broadcasting can be used for high quality music transmission
Description : An FM signal with modulation index mƒ is passed through a frequency tripler. The modulation index of the output signal will be (1) mƒ (2) 3mƒ (3) 9mƒ (4) 27mƒ
Last Answer : An FM signal with modulation index mƒ is passed through a frequency tripler. The modulation index of the output signal will be 3mƒ
Description : The modulation index of a FM Signal having modulating frequency 2 KHz and Max deviation is 10 KHz, is: - a) 2 b) 5 c) 3 d) 4
Last Answer : The modulation index of a FM Signal having modulating frequency 2 KHz and Max deviation is 10 KHz, is: - 5
Description : What is the difference between phase and frequency modulation? A. Is purely theoretical because they are the same in practice B. Lies in poorer audio response of phase modulation C. Lies in the different definitions of the modulation index D. Is too great to make two systems compatible
Last Answer : C. Lies in the different definitions of the modulation index
Description : What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000
Last Answer : C. 125,000
Description : What modulation is normally used with digital data? A. AM B. FM C. SSB D. QPSK
Last Answer : D. QPSK
Description : What type of modulation is used on voice and video signals? A. AM B. FM C. SSB D. QPSK
Last Answer : B. FM
Description : In radio regulation, the first symbol in the designation of radio emission is ______. A. Bandwidth B. Nature of signal(s) modulation the main carrier C. Type of modulation of the main carrier D. Type of information to be transmitted
Last Answer : C. Type of modulation of the main carrier
Description : In amplitude modulation technique the unmodulated carrier is referred to as having ______. A. 100% modulation B. 0% modulation C. 50% modulated D. Over modulated
Last Answer : B. 0% modulation
Description : An AM transmitter is rated 100W at 100% modulation. How much power required for the carrier? A. 33.33 W B. 66.66 W C. 83.33 W D. 100 W
Last Answer : B. 66.66 W
Description : Modulation in which the modulated wave is always present. A. Carrier modulation B. Front-end C. Continuous modulation D. Log-periodic modulation
Last Answer : C. Continuous modulation
Description : The third symbol in the designation of radio emission under the ITU rules refers to A. Type of the modulation of the main carrier B. Bandwidth C. Nature of the signals modulating the main carrier D. Type of information to be transmitted
Last Answer : D. Type of information to be transmitted
Description : The first symbol in the designation of radio emission under the ITU rules to A. Nature of signals modulating the main carrier B. Type of information to be transmitted C. Bandwidth D. Type of modulation of the main carrier
Last Answer : D. Type of modulation of the main carrier
Description : Modulation means A. Varying of information B. Utilization of a single transmission channel to carry multiple signals C. Varying of some parameters of a carrier such as its amplitude to transmit information D. Transmit pulses in DC form on a copper wire
Last Answer : C. Varying of some parameters of a carrier such as its amplitude to transmit information
Description : At 100% modulation, the sum fo the effective voltages in both sidebands is equal to ______% of the unmodulated carrier voltage. A. 50 B. 71 C. 100 D. 25
Last Answer : B. 71
Description : Which of the following is not a baseband signal modulation? A. RF carrier B. Video System C. Audio signal D. Binary coded pulses
Last Answer : A. RF carrier
Description : If the percentage modulation of an AM amplifier is 88% and the modulating signal is 1 volt, the carrier has an amplitude of _______________. A. 1.14 volts B. 0.88 volt C. 1.88 volts D. 0.12 volt
Last Answer : A. 1.14 volts
Description : Three audio waves with 100,200 and 300 volts amplitude respectively, simultaneously modulate a 450 volts carrier. What is the total percent of modulation of the AM wave? A. 69 % B. 115.5 % C. 50% D. 83%
Last Answer : D. 83%
Description : Give the expression for modulation index for AM and FM.
Last Answer : 1.Modulation index for AM ma=Vm / Vc Where Vm is modulating voltage Vc is the carrier voltage 2.Modulation index for FM mf=δ /fm where δ is the deviation fm is the modulating frequency
Description : Differentiate between AM and FM on the basis of: (i) Definition (ii) Bandwidth (iii) Modulation Index (iv) Application
Last Answer : Compare AM and FM on the basis of i)Definition ii)Bandwidth iii) Wave propogation iv)Number of sidebands
Description : Define modulation index in FM. What is maximum value of deviation ratio.
Last Answer : Modulation Index of FM: It is defined as the ratio of Frequency Deviation (δ) to the modulating signal frequency (fm). (OR)
Description : Define modulation index of FM.
Last Answer : Modulation index of FM is defined as the ratio of the frequency deviation to the modulating frequency.
Description : Compare AM with FM with respect to following points: a) Definition. b) Modulation index. c) Bandwidth. d) Side band.
Last Answer : Parameters AM FM Definition It is the process in which the amplitude of carrier signal is varied in accordance with the instantaneous value of modulating signal keeping frequency and ... frequency deviation. Side band There are two sidebands Infinite number of sideband
Description : For AM, fc =500kHz , fm = 5 kHz Determine: (i) Upper and lower sideband frequencies (ii) Bandwidth
Last Answer : Given data fc = 500KHz , fm = 5KHz USB =fc+fm USB = 500+5 =505 KHz. LSB =fc – fm LSB = 500 – 5 =495 KHz Bandwidth = 2fm . = 2* 5 =10 KHz
Description : With a single modulating tone, what is the amplitude of the sideband frequencies at 100-percent modulation?
Last Answer : One-half the amplitude of the carrier.
Last Answer : In AM the amplitude of carrier components remains constant, while in FM it does not remain constant.
Description : The antenna current is doubled when the modulation index is doubled in ______ AM system. A. A5C B. A3J C. A3 D. A3H
Last Answer : B. A3J
Description : If the modulation index of an AM wave is doubled, the antenna current is also doubled, the AM system being used is A. A5C B. A3J C. A3H D. A3
Description : If the radiated power of AM transmitter is 10 KW, the power in the carrier for modulation index of 0.6 is nearly: (1) 8.24 KW (2) 9.26 KW (3) 8.47 KW (4) 9.6 KW
Last Answer : If the radiated power of AM transmitter is 10 KW, the power in the carrier for modulation index of 0.6 is nearly: 8.47 KW.
Description : Which transmit only one sideband? A. A3E B. 3AJ C. 11BE D. H3E
Last Answer : D. H3E