ROM has a: a) Decoder followed by encoder b) Multiplexer followed by decoder c) Demultiplexer followed by an encoder d) None of the above

ROM has a: a) Decoder followed by encoder b) Multiplexer followed by decoder c) Demultiplexer followed by an encoder d) None of the above
by

1 Answer

Answer :

Ans: A  
by
selected by

Related questions

A device which converts BCD to Seven Segment is called (A) Encoder (B) Decoder (C) Multiplexer (D) Demultiplexer

Description : A device which converts BCD to Seven Segment is called (A) Encoder (B) Decoder (C) Multiplexer (D) Demultiplexer

Last Answer : Ans: B A device which converts BCD to Seven Segment is called DECODER. (A decoder coverts binary words into alphanumeric characters.)

Data transfers are done using: a. Multiplexer switching b. Demultiplexer switching c. Adder switching d. Subtractor switching

Description : Data transfers are done using: a. Multiplexer switching b. Demultiplexer switching c. Adder switching d. Subtractor switching

Last Answer : a. Multiplexer switching

A ________ is a repeater. A) regenerator B) ADM C) STS multiplexer/demultiplexer D) none of the above

Description : A ________ is a repeater. A) regenerator B) ADM C) STS multiplexer/demultiplexer D) none of the above

Last Answer : STS multiplexer/demultiplexer

The device which changes from serial data to parallel data is (A) COUNTER (B) MULTIPLEXER (C) DEMULTIPLEXER (D) FLIP-FLOP

Description : The device which changes from serial data to parallel data is (A) COUNTER (B) MULTIPLEXER (C) DEMULTIPLEXER (D) FLIP-FLOP

Last Answer : Ans: C The device which changes from serial data to parallel data is demultiplexer. (A demultiplexer takes in data from one line and directs it to any of its N outputs depending on the status of the select inputs.)

What is the difference between decoder and encoder ?

Description : What is the difference between decoder and encoder ?

Last Answer : Differences between decoders and encoders Differences between decoders A decoder is a logic circuit that decodes a code. Used in computer memory . It takes a maximum of 2n output from n input . The difference of ... Out of the maximum 2 inputs, 1 or 0 outputs are available in n output lines .

Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Description : Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Last Answer : B. The approximation of the quantized signal

Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Description : Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Last Answer : The approximation of the quantized signal

Quantization noise is caused by A. binary coding techniques B. serial transmission errors C. the synchronization between encoder and decoder D. the approximation of the quantized signal

Description : Quantization noise is caused by A. binary coding techniques B. serial transmission errors C. the synchronization between encoder and decoder D. the approximation of the quantized signal

Last Answer : D. the approximation of the quantized signal

How is selects the register that receives the information from the output bus. Decoder Encoder MUX

Description : How is selects the register that receives the information from the output bus. Decoder Encoder MUX

Last Answer : Decoder

It is used to encode the minimum amount of speech information necessary to reproduce a perceptible message with a fewer bits that those needed by a conventional encoder/decoder

Description : It is used to encode the minimum amount of speech information necessary to reproduce a perceptible message with a fewer bits that those needed by a conventional encoder/decoder

Last Answer : vocoders

The vehicle through which the coded message is transmitted from the source to the receiver is called a(n) A)coder. B)decoder. C)encoder. D)relay channel. E)medium of transmission.

Description : The vehicle through which the coded message is transmitted from the source to the receiver is called a(n) A)coder. B)decoder. C)encoder. D)relay channel. E)medium of transmission.

Last Answer : E)medium of transmission.

Expressive communication is driven by (A) Passive aggression (B) Encoder’s personality characteristics (C) External clues (D) Encoder-decoder contract

Description : Expressive communication is driven by (A) Passive aggression (B) Encoder’s personality characteristics (C) External clues (D) Encoder-decoder contract

Last Answer : (B) Encoder’s personality characteristics

In circular communication, the encoder becomes a decoder when there is (A) noise (B) audience (C) criticality (D) feedback

Description : In circular communication, the encoder becomes a decoder when there is (A) noise (B) audience (C) criticality (D) feedback

Last Answer : Answer: D

Communication becomes circular when (A) the decoder becomes an encoder (B) the feedback is absent (C) the source is credible (D) the channel is clear

Description : Communication becomes circular when (A) the decoder becomes an encoder (B) the feedback is absent (C) the source is credible (D) the channel is clear

Last Answer : Answer: A Circular (contextual) Discussion is conducted in a circular manner, telling stories and developing a context around the main point, which is often unstated be cause the listener will get the point after I give them all the information. There is a high reliance on context.

In RISC architecture access to registers is made as a block and register file in a particular register can be selected by using: a. Multiplexer b. Decoder c. Subtractor d. Adder

Description : In RISC architecture access to registers is made as a block and register file in a particular register can be selected by using: a. Multiplexer b. Decoder c. Subtractor d. Adder

Last Answer : b. Decoder

Which of the following is a sequential circuit? (A) Multiplexer (B) Decoder (C) Counter (D) Full adder

Description : Which of the following is a sequential circuit? (A) Multiplexer (B) Decoder (C) Counter (D) Full adder

Last Answer : (C) Counter

What Is Encoder, How It Function?

Description : What Is Encoder, How It Function?

Last Answer : An encoder is a device used to change a signal (such as a bitstream) or data into a code. The code may serve any of a number of purposes such as compressing information for ... programmed algorithm, especially if any part is digital, while most analog encoding is done with analog circuitry.

A 1 to 16 demultiplexer has

Description : A 1 to 16 demultiplexer has (a) 2 select inputs (c) 4 select inputs, (b) 3 select inputs (d) 8 select inputs

Last Answer : 2ⁿ = 16 nlog 2=log 16 n = log 16/log 2 n = 4 select inputs

Why is Adobe Media Encoder soooo sloooow?

Description : Why is Adobe Media Encoder soooo sloooow?

Last Answer : Well xenons aren’t exactly made for video rendering, they are more for multiple things going on at once, not all being super intense. That video size is way to much though, just try googling “Adobe Premier Pro best rendering settings”, and you should come across some youtube videos and tutorials.

Where is the encoder ?

Description : Where is the encoder ?

Last Answer : An encoder is a composite circuit that converts our language into a comprehensible mechanical language of a computer. Encoders help convert any alphanumeric and numeric color to ASCII , ABSIDIC , BCD , ... is obtained by imagining the input lines of the decoder as output and the outlines as input.

What is Encoder ?

Description : What is Encoder ?

Last Answer : Encoder converts human comprehensible language into computer intelligible i.e. mechanical language. But if the computer's intelligible, i.e. mechanical language, is displayed on the monitor screen, ... it is decoder that translates this mechanical language into a language that people can understand.

How do you tighten mimaki jv 300 encoder strip

Description : How do you tighten mimaki jv 300 encoder strip

Last Answer : Need Answer

The circuit used to store one bit of data is known as_____ A. Encoder B. OR C. Flip Flop D. None of the Above

Description : The circuit used to store one bit of data is known as_____ A. Encoder B. OR C. Flip Flop D. None of the Above

Last Answer : C. Flip Flop

What is priority Encoder?

Description : What is priority Encoder?

Last Answer : A priority encoder is an encoder circuit that includes the priority function. In priority encoder, if 2 or more inputs are equal to 1 at the same time, the input having the highest priority will take precedence.

Define Encoder?

Description : Define Encoder?

Last Answer : An encoder has 2n input lines and n output lines. In encoder the output lines generate the binary code corresponding to the input value.

Data rate at which serial PCM bits are clocked out of the PCM encoder onto the transmission line.

Description : Data rate at which serial PCM bits are clocked out of the PCM encoder onto the transmission line.

Last Answer : line speed

A Huffman encoder takes a set of characters with fixed length and produces a set of characters of A. fixed length B. constant length C. random length D. variable length

Description : A Huffman encoder takes a set of characters with fixed length and produces a set of characters of A. fixed length B. constant length C. random length D. variable length

Last Answer : D. variable length

At any given time, the output of an encoder depends on ______ a. Past input b. Present input c. Both a and b d. None of the above

Description : At any given time, the output of an encoder depends on ______ a. Past input b. Present input c. Both a and b d. None of the above

Last Answer : b. Present input

How many character an encoder reads and searches the dictionary to see if this input exists in the dictionary. a. 2 character b. 1 character c. 3 character d. Both (a) and (b)

Description : How many character an encoder reads and searches the dictionary to see if this input exists in the dictionary. a. 2 character b. 1 character c. 3 character d. Both (a) and (b)

Last Answer : a. 2 character

What is priority Encoder?

Description : What is priority Encoder?

Last Answer : A priority encoder is an encoder circuit that includes the priority function. In priority encoder, if 2 or more inputs are equal to 1 at the same time, the input having the highest priority will take precedence.

Define Encoder?

Description : Define Encoder?

Last Answer : An encoder has 2n input lines and n output lines. In encoder the output lines generate the binary code corresponding to the input value.

The three outputs x1x2x3 from the 8x3 priority encoder are used to provide a vector address of the form 101x1x2x300. What is the second highest priority vector address in hexadecimal if the vector addresses are starting from the one with the highest priority? (A) BC (B) A4 (C) BD (D) AC

Description : The three outputs x1x2x3 from the 8x3 priority encoder are used to provide a vector address of the form 101x1x2x300. What is the second highest priority vector address in hexadecimal if the vector addresses are starting from the one with the highest priority? (A) BC (B) A4 (C) BD (D) AC

Last Answer : Answer: B

Which circuit is used to store one bit of data ? (1) Register (2) Flip Flop (3) Vector (4) Encoder

Description : Which circuit is used to store one bit of data ? (1) Register (2) Flip Flop (3) Vector (4) Encoder

Last Answer : Flip Flop

Draw the block diagram of digital communication system.Explain the function of source encoder and channel encoder.

Description : Draw the block diagram of digital communication system.Explain the function of source encoder and channel encoder.

Last Answer : Source Encoder : The input to the source encoder (also referred to as the source coder) is a string of symbols occurring at a rate symbols/sec. The source encoder converts the ... it possible for the receiver to detect and/or correct some of the errors in the information bearing bits.

What is optical encoder? List its types.

Description : What is optical encoder? List its types.

Last Answer : Optical Encoder : An optical encoder is an electromechanical device which has an electrical output in digital form proportional to the angular position of the input shaft. Optical encoders ... encoder 2) Absolute optical encoder: a)Single turn absolute optical encoder b)Multiturn absolute encoder

Describe rotary motion measurement using optical encoder.

Description : Describe rotary motion measurement using optical encoder.

Last Answer : An optical encoder is an electromechanical device which has an electrical output in digital form proportional to the angular position of the input shaft. Optical encoders enable an angular ... amplified and converted into digital form. This signal is then transmitted to the data processor.

Explain working rotary encoder.

Description : Explain working rotary encoder. 

Last Answer : A rotary encoder, also called a shaft encoder, is an electro-mechanical device that converts the angular position or motion of a shaft or axle to an analog or digital code. There are ... lenses, computer input devices (such as opto-mechanical mice and trackballs), and rotating radar platforms.

What is encoder? Draw and explain an optical encoder operation for rotary motion measurement.

Description : What is encoder? Draw and explain an optical encoder operation for rotary motion measurement.

Last Answer : Definition: Digital encoders convert analog motion (rotary or linear) to a digital output form. An optical encoder is an electromechanical device which has an electrical output in digital form proportional to ... . In this way a train of pulses equivalent to the rotation is obtained as shown.

Floppy disc is a: a) ROM b) Fast storage c) Flexible storage d) Permanent storage

Description : Floppy disc is a: a) ROM b) Fast storage c) Flexible storage d) Permanent storage

Last Answer : Ans: C

Central Processing Unit (CPU) of a computer consists of: a) Control and arithmetic logic unit and primary storage b) Control, clock and ROM c) Control, clock and RAM d) Control, ALU, RAM and ROM

Description : Central Processing Unit (CPU) of a computer consists of: a) Control and arithmetic logic unit and primary storage b) Control, clock and ROM c) Control, clock and RAM d) Control, ALU, RAM and ROM

Last Answer : Ans: A

An Arithmetic Logic Unit (ALU) normally contains a number of multiplexer circuits. How many of these might you expect to find in an ALU in a modern CPU chip, and what is their purpose?

Description : An Arithmetic Logic Unit (ALU) normally contains a number of multiplexer circuits. How many of these might you expect to find in an ALU in a modern CPU chip, and what is their purpose?

Last Answer : answer:FYI, We don’t do homework here. Hint: Realize that an ALU needs to be fed instructions (opcodes) and that they will need to be decoded. This question is also somewhat dated.

What circuit is responsible in activating and deactivating adjacent antenna elements in a mobile satellite array? A. Radial divider B. Divider/combiner C. Radial combiner D. Radial multiplexer

Description : What circuit is responsible in activating and deactivating adjacent antenna elements in a mobile satellite array? A. Radial divider B. Divider/combiner C. Radial combiner D. Radial multiplexer

Last Answer : A. Radial divider

Define multiplexer

Description : Define multiplexer

Last Answer : Multiplexer is a digital switch. If allows digital information from several sources to be routed onto a single output line.

Multiplexing in a time division multiplexer occurs based upon A. the position of a frame within the group of frames B. the positioning of data within a frame C. the priority assigned to a connected device D. the activity of a connected device

Description : Multiplexing in a time division multiplexer occurs based upon A. the position of a frame within the group of frames B. the positioning of data within a frame C. the priority assigned to a connected device D. the activity of a connected device

Last Answer : B. the positioning of data within a frame

A communications device that combines transmissions from several I/O devices into one line is a a. concentrator b. modifier c. multiplexer d. full-duplex line

Description : A communications device that combines transmissions from several I/O devices into one line is a a. concentrator b. modifier c. multiplexer d. full-duplex line

Last Answer : multiplexer

Which of the following does not allow multiple uses or devices to share one communication line? a. doubleplexer b. multiplexer c. concentrator d. controller

Description : Which of the following does not allow multiple uses or devices to share one communication line? a. doubleplexer b. multiplexer c. concentrator d. controller

Last Answer : concentrator

Which of the following might be used by a company to satisfy its growing communications needs? a. front end processor b. multiplexer c. controller d. concentrator e. all of the above

Description : Which of the following might be used by a company to satisfy its growing communications needs? a. front end processor b. multiplexer c. controller d. concentrator e. all of the above

Last Answer : all of the above

An add/drop multiplexer isa ______device. A) one-layerB)two-layerC)three-layerD)four-layer

Description : An add/drop multiplexer isa ______device. A) one-layer B) two-layer C) three-layer D) four-layer

Last Answer : three-layer

An STS multiplexer is a ______ device. A) one-layer B) two-layer C) three-layer D) four-layer

Description : An STS multiplexer is a ______ device. A) one-layer B) two-layer C) three-layer D) four-layer

Last Answer : two-layer

_______ allow insertion and extraction of signals. A) regenerators B) ADMs C) STS multiplexer/demultiplexers D) none of the above

Description : _______ allow insertion and extraction of signals. A) regenerators B) ADMs C) STS multiplexer/demultiplexers D) none of the above

Last Answer : regenerators