Describe rotary motion measurement using optical encoder.

Describe rotary motion measurement using optical encoder.
by

1 Answer

Answer :

image

An optical encoder is an electromechanical device which has an electrical output in digital form proportional to the angular position of the input shaft. Optical encoders enable an angular displacement to be converted directly into a digital form.

An optical encoder is an angular position sensor It has a shaft mechanically coupled to an input driver which rotates a disc rigidly fixed to it. A succession of opaque and clear segments are marked on the surface of the disc. Light from infrared emitting diodes reaches the infrared receivers through the transparent slits of the rotating disc. An analogue signal is created. Then electronically, the signal is amplified and converted into digital form. This signal is then transmitted to the data processor.

by

Related questions

What is encoder? Draw and explain an optical encoder operation for rotary motion measurement.

Description : What is encoder? Draw and explain an optical encoder operation for rotary motion measurement.

Last Answer : Definition: Digital encoders convert analog motion (rotary or linear) to a digital output form. An optical encoder is an electromechanical device which has an electrical output in digital form proportional to ... . In this way a train of pulses equivalent to the rotation is obtained as shown.

Explain working rotary encoder.

Description : Explain working rotary encoder. 

Last Answer : A rotary encoder, also called a shaft encoder, is an electro-mechanical device that converts the angular position or motion of a shaft or axle to an analog or digital code. There are ... lenses, computer input devices (such as opto-mechanical mice and trackballs), and rotating radar platforms.

What is optical encoder? List its types.

Description : What is optical encoder? List its types.

Last Answer : Optical Encoder : An optical encoder is an electromechanical device which has an electrical output in digital form proportional to the angular position of the input shaft. Optical encoders ... encoder 2) Absolute optical encoder: a)Single turn absolute optical encoder b)Multiturn absolute encoder

Explain how rotary motion can be measured

Description : Explain how rotary motion can be measured

Last Answer : LVDTs are also made in rotary models . Its core has specially shaped iron from it is shown in fig linear output is possible for only +/- 40 degree. Thus angular displacement can be measured. ... its direction may be ascertained from the magnitude and phase of output voltage of transducer. 

The motion of a bicycle wheel is a.Curvilinear b.Translatory c.Linear d.Rotary as well as translatory e.Rotary

Description : The motion of a bicycle wheel is a.Curvilinear b.Translatory c.Linear d.Rotary as well as translatory e.Rotary

Last Answer : d. Rotary as well as translatory

When a body moves round a fixed axis it will have a.A motion of rotation and translation b.A circular motion c.A rotary motion d.A translatory motion e.A swinging motion

Description : When a body moves round a fixed axis it will have a.A motion of rotation and translation b.A circular motion c.A rotary motion d.A translatory motion e.A swinging motion

Last Answer : b. A circular motion

Is an example of rotary motion?

Description : Is an example of rotary motion?

Last Answer : The rotational motion of an object on a fixed axis. IE - A Wheelon a car. Theoretically speaking, there is no such thing asrotational force. The molecules are trying to move in a straitline, but are being pulled back by the axis bond.

In compression ignition engines, swirl denotes a. Haphazard motion of the gases in the cylinder b. Rotary motion of the gases in the cylinder. c. Radial motion of the gases in the cylinder. d. None of the above

Description : In compression ignition engines, swirl denotes a. Haphazard motion of the gases in the cylinder b. Rotary motion of the gases in the cylinder. c. Radial motion of the gases in the cylinder. d. None of the above

Last Answer : ANSWER a. Haphazard motion of the gases in the chamber

Which kind of motion get with the help of prismatic joint in robotics. (A) Rotary motion (B) Linear motion

Description : Which kind of motion get with the help of prismatic joint in robotics. (A) Rotary motion (B) Linear motion

Last Answer : B

Which kind of motion get with the help of revolute joint in robotics. (A) Linear motion (B) Rotary motion

Description : Which kind of motion get with the help of revolute joint in robotics. (A) Linear motion (B) Rotary motion

Last Answer : B

Describe with neat labeled diagram measurement of flow using turbine flow meter.

Description : Describe with neat labeled diagram measurement of flow using turbine flow meter.

Last Answer : Explanation: - Turbine flow meter s are volumetric flow meters and are available in wide ranges. The output is usually in the form of a digital electrical signal whose frequency is directly ... totalized by a counter to give the value of total flow over a particular interval of time.

Describe the instrumentation system used for temperature measurement using thermistor.

Description : Describe the instrumentation system used for temperature measurement using thermistor.

Last Answer : A thermistor is a type of resistor whose resistance is dependent on temperature. Thermistors are of two opposite fundamental types: With NTC, resistance Decreases with temperature to ... converted to Digital by ADC further given to multiplexer, then output is displayed on computer. 

A bolometer is (A) Used for the measurement of thermal radiation (B) An element which senses optical input and delivers thermal output (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : A bolometer is (A) Used for the measurement of thermal radiation (B) An element which senses optical input and delivers thermal output (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

When is an optical power meter measurement recommended for conducting field measurements on installed optical fiber cables or cable plants?

Description : When is an optical power meter measurement recommended for conducting field measurements on installed optical fiber cables or cable plants?

Last Answer : When an installed optical fiber cable or cable plant is less than 50 meters in length.

Why is Adobe Media Encoder soooo sloooow?

Description : Why is Adobe Media Encoder soooo sloooow?

Last Answer : Well xenons aren’t exactly made for video rendering, they are more for multiple things going on at once, not all being super intense. That video size is way to much though, just try googling “Adobe Premier Pro best rendering settings”, and you should come across some youtube videos and tutorials.

Where is the encoder ?

Description : Where is the encoder ?

Last Answer : An encoder is a composite circuit that converts our language into a comprehensible mechanical language of a computer. Encoders help convert any alphanumeric and numeric color to ASCII , ABSIDIC , BCD , ... is obtained by imagining the input lines of the decoder as output and the outlines as input.

What is the difference between decoder and encoder ?

Description : What is the difference between decoder and encoder ?

Last Answer : Differences between decoders and encoders Differences between decoders A decoder is a logic circuit that decodes a code. Used in computer memory . It takes a maximum of 2n output from n input . The difference of ... Out of the maximum 2 inputs, 1 or 0 outputs are available in n output lines .

What is Encoder ?

Description : What is Encoder ?

Last Answer : Encoder converts human comprehensible language into computer intelligible i.e. mechanical language. But if the computer's intelligible, i.e. mechanical language, is displayed on the monitor screen, ... it is decoder that translates this mechanical language into a language that people can understand.

How do you tighten mimaki jv 300 encoder strip

Description : How do you tighten mimaki jv 300 encoder strip

Last Answer : Need Answer

ROM has a: a) Decoder followed by encoder b) Multiplexer followed by decoder c) Demultiplexer followed by an encoder d) None of the above

Description : ROM has a: a) Decoder followed by encoder b) Multiplexer followed by decoder c) Demultiplexer followed by an encoder d) None of the above

Last Answer : Ans: A

The circuit used to store one bit of data is known as_____ A. Encoder B. OR C. Flip Flop D. None of the Above

Description : The circuit used to store one bit of data is known as_____ A. Encoder B. OR C. Flip Flop D. None of the Above

Last Answer : C. Flip Flop

What Is Encoder, How It Function?

Description : What Is Encoder, How It Function?

Last Answer : An encoder is a device used to change a signal (such as a bitstream) or data into a code. The code may serve any of a number of purposes such as compressing information for ... programmed algorithm, especially if any part is digital, while most analog encoding is done with analog circuitry.

Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Description : Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Last Answer : B. The approximation of the quantized signal

Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Description : Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Last Answer : The approximation of the quantized signal

What is priority Encoder?

Description : What is priority Encoder?

Last Answer : A priority encoder is an encoder circuit that includes the priority function. In priority encoder, if 2 or more inputs are equal to 1 at the same time, the input having the highest priority will take precedence.

Define Encoder?

Description : Define Encoder?

Last Answer : An encoder has 2n input lines and n output lines. In encoder the output lines generate the binary code corresponding to the input value.

Quantization noise is caused by A. binary coding techniques B. serial transmission errors C. the synchronization between encoder and decoder D. the approximation of the quantized signal

Description : Quantization noise is caused by A. binary coding techniques B. serial transmission errors C. the synchronization between encoder and decoder D. the approximation of the quantized signal

Last Answer : D. the approximation of the quantized signal

How is selects the register that receives the information from the output bus. Decoder Encoder MUX

Description : How is selects the register that receives the information from the output bus. Decoder Encoder MUX

Last Answer : Decoder

It is used to encode the minimum amount of speech information necessary to reproduce a perceptible message with a fewer bits that those needed by a conventional encoder/decoder

Description : It is used to encode the minimum amount of speech information necessary to reproduce a perceptible message with a fewer bits that those needed by a conventional encoder/decoder

Last Answer : vocoders

Data rate at which serial PCM bits are clocked out of the PCM encoder onto the transmission line.

Description : Data rate at which serial PCM bits are clocked out of the PCM encoder onto the transmission line.

Last Answer : line speed

A Huffman encoder takes a set of characters with fixed length and produces a set of characters of A. fixed length B. constant length C. random length D. variable length

Description : A Huffman encoder takes a set of characters with fixed length and produces a set of characters of A. fixed length B. constant length C. random length D. variable length

Last Answer : D. variable length

At any given time, the output of an encoder depends on ______ a. Past input b. Present input c. Both a and b d. None of the above

Description : At any given time, the output of an encoder depends on ______ a. Past input b. Present input c. Both a and b d. None of the above

Last Answer : b. Present input

How many character an encoder reads and searches the dictionary to see if this input exists in the dictionary. a. 2 character b. 1 character c. 3 character d. Both (a) and (b)

Description : How many character an encoder reads and searches the dictionary to see if this input exists in the dictionary. a. 2 character b. 1 character c. 3 character d. Both (a) and (b)

Last Answer : a. 2 character

What is priority Encoder?

Description : What is priority Encoder?

Last Answer : A priority encoder is an encoder circuit that includes the priority function. In priority encoder, if 2 or more inputs are equal to 1 at the same time, the input having the highest priority will take precedence.

Define Encoder?

Description : Define Encoder?

Last Answer : An encoder has 2n input lines and n output lines. In encoder the output lines generate the binary code corresponding to the input value.

The vehicle through which the coded message is transmitted from the source to the receiver is called a(n) A)coder. B)decoder. C)encoder. D)relay channel. E)medium of transmission.

Description : The vehicle through which the coded message is transmitted from the source to the receiver is called a(n) A)coder. B)decoder. C)encoder. D)relay channel. E)medium of transmission.

Last Answer : E)medium of transmission.

A device which converts BCD to Seven Segment is called (A) Encoder (B) Decoder (C) Multiplexer (D) Demultiplexer

Description : A device which converts BCD to Seven Segment is called (A) Encoder (B) Decoder (C) Multiplexer (D) Demultiplexer

Last Answer : Ans: B A device which converts BCD to Seven Segment is called DECODER. (A decoder coverts binary words into alphanumeric characters.)

Expressive communication is driven by (A) Passive aggression (B) Encoder’s personality characteristics (C) External clues (D) Encoder-decoder contract

Description : Expressive communication is driven by (A) Passive aggression (B) Encoder’s personality characteristics (C) External clues (D) Encoder-decoder contract

Last Answer : (B) Encoder’s personality characteristics

In circular communication, the encoder becomes a decoder when there is (A) noise (B) audience (C) criticality (D) feedback

Description : In circular communication, the encoder becomes a decoder when there is (A) noise (B) audience (C) criticality (D) feedback

Last Answer : Answer: D

Communication becomes circular when (A) the decoder becomes an encoder (B) the feedback is absent (C) the source is credible (D) the channel is clear

Description : Communication becomes circular when (A) the decoder becomes an encoder (B) the feedback is absent (C) the source is credible (D) the channel is clear

Last Answer : Answer: A Circular (contextual) Discussion is conducted in a circular manner, telling stories and developing a context around the main point, which is often unstated be cause the listener will get the point after I give them all the information. There is a high reliance on context.

The three outputs x1x2x3 from the 8x3 priority encoder are used to provide a vector address of the form 101x1x2x300. What is the second highest priority vector address in hexadecimal if the vector addresses are starting from the one with the highest priority? (A) BC (B) A4 (C) BD (D) AC

Description : The three outputs x1x2x3 from the 8x3 priority encoder are used to provide a vector address of the form 101x1x2x300. What is the second highest priority vector address in hexadecimal if the vector addresses are starting from the one with the highest priority? (A) BC (B) A4 (C) BD (D) AC

Last Answer : Answer: B

Which circuit is used to store one bit of data ? (1) Register (2) Flip Flop (3) Vector (4) Encoder

Description : Which circuit is used to store one bit of data ? (1) Register (2) Flip Flop (3) Vector (4) Encoder

Last Answer : Flip Flop

Draw the block diagram of digital communication system.Explain the function of source encoder and channel encoder.

Description : Draw the block diagram of digital communication system.Explain the function of source encoder and channel encoder.

Last Answer : Source Encoder : The input to the source encoder (also referred to as the source coder) is a string of symbols occurring at a rate symbols/sec. The source encoder converts the ... it possible for the receiver to detect and/or correct some of the errors in the information bearing bits.

When calculating Newton's Second Law of Motion what is the resulting unit of measurement called?

Description : When calculating Newton's Second Law of Motion what is the resulting unit of measurement called?

Last Answer : hhhsgdhchjdhsnsjhjskhjsbsjnsbjsnhjhjdfsdgsjhshvbjhdhdvb

The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that A Its natural frequency is very low in comparison to the frequency of vibration B Its natural frequency is very high in comparison to the frequency of vibration C Its natural frequency is equal to the frequency of vibration D Measurement of vibratory motion is without any reference point

Description : The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that A Its natural frequency is very low in comparison to the frequency ... is equal to the frequency of vibration D Measurement of vibratory motion is without any reference point

Last Answer : C Its natural frequency is equal to the frequency of vibration

The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that a) its natural frequency is very low in comparison to the frequency of vibration b) its natural frequency is very high in comparison to the frequency of vibration c) its natural frequency is equal to the frequency of vibration d) measurement of vibratory motion is without any reference point

Description : The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that a) its natural frequency is very low in comparison to the frequency ... is equal to the frequency of vibration d) measurement of vibratory motion is without any reference point

Last Answer : c) its natural frequency is equal to the frequency of vibration

The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that ______. (A) its natural frequency is very low in comparison to the frequency of vibration (B) its natural frequency is very high in comparison to the frequency of vibration (C) its natural frequency is equal to the frequency of vibration (D) measurement of vibratory motion is without any reference poin

Description : The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that ______. (A) its natural frequency is very low in comparison to the ... is equal to the frequency of vibration (D) measurement of vibratory motion is without any reference poin

Last Answer : (C) its natural frequency is equal to the frequency of vibration

The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that a) its natural frequency is very low in comparison to the frequency of vibration b) its natural frequency is very high in comparison to the frequency of vibration c) its natural frequency is equal to the frequency of vibration d) measurement of vibratory motion is without any reference poin

Description : The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that a) its natural frequency is very low in comparison to the frequency ... is equal to the frequency of vibration d) measurement of vibratory motion is without any reference poin

Last Answer : c) its natural frequency is equal to the frequency of vibration

Briefly describe about ‘rotary compressor’?

Description : Briefly describe about ‘rotary compressor’?  

Last Answer : Rotary compressors have rotors in place of pistons and give a continuous, pulsation free discharge. They operate at high speed and generally provide higher throughput than reciprocating compressors. They are directly ... , vibrate less, and have a lower number of parts which are subject to wear. 

What is pyrometry? Describe working of optical pyrometer with neat diagram.

Description : What is pyrometry? Describe working of optical pyrometer with neat diagram.

Last Answer : Explanation- The working principle of optical pyrometer state that the brightness of light of a given color emitted by a hot source, gives an indication of temperature.  Working: It ... the source and brightness produced by the filament are equal, the outline of the filament disappear.