Description : Stainless steel is usually made by alloying the steel with – (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper
Last Answer : (3) chromium and nickel Explanation: In metallurgy, stainless steel is defined as a steel alloy with a minimum of 10.5 per cent to 11 per cent chromium content by mass. There are ... virtually nonmagnetic and less brittle at low temperatures. For greater hardness and strength, more carbon is added.
Description : Which of the following are alloying materials used the manufacture of stainless steel? w) Limestone and carbon x) Calcium oxide and oxygen y) Oxygen and sulfur dioxide z) Chromium and nickel
Last Answer : ANSWER: Z -- CHROMIUM AND NICKEL
Description : Which of the following is not a principal alloying element for the structural steel? (A) Molybdenum (B) Nickel (C) Manganese (D) Chromium
Last Answer : (A) Molybdenum
Description : Alloying elements present in Haynes stellite, which has superior performance than high speed steel, are: (A) Nickel, cobalt & chromium (B) Tungsten, chromium & cobalt (C) Manganese, chromium & cobalt (D) Tungsten, molybdenum & nickel
Last Answer : Option B
Description : Explain the effects of alloying chromium and nickel in stainless steel.
Last Answer : Addition of nickel and chromium increases the tensile strength and increase in resistance to corrosion takes place.
Description : Explain The Effects Of Alloying Chromium And Nickel In Stainless Steel.?
Last Answer : The addition of nickel and chromium increases the tensile strength and increase in resistance to corrosion takes place.
Description : Stainless steel contains (A) Chromium and nickel (B) Copper (C) Aluminium (D) Vanadium
Last Answer : (A) Chromium and nickel
Description : Which of the following is an important element of stainless steel. w) chromium x) magnesium y) copper z) nickel
Last Answer : ANSWER: W -- CHROMIUM
Description : Pick out the correct statement. (A) Stainless steel is nothing but chromium coated steel (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal (C) ... its temporary distortion under the action of applied stress (D) Rusting of iron is not electrochemical in nature
Last Answer : (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal
Description : All of the following alloying elements of steel increases hardness but sacrifice ductility, except (A) Nickel (B) Vanadium (C) Molybdenum (D) Chromium
Last Answer : (A) Nickel
Description : Nickel and __________ are the alloying element added in steel to increase its toughness. (A) Molybdenum (B) Chromium (C) Vanadium (D) Silicon
Last Answer : Option D
Description : Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium (4) Nickel
Last Answer : (2) Tungsten Explanation: Stainless steel is defined as a steel alloy of iron with a minimum of 10.5% to 11% chromium content by mass. There are different types of stainless steels: ... stabilized. This crystal structure makes such steels virtually non-magnetic and less brittle at low temperatures.
Description : Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium(4) Nickel
Last Answer : Tungsten
Description : ________ is an alloy made from iron , chromium and nickel . a) stainless steel b)steel c)brass d)bronze
Last Answer : a) stainless steel
Description : Work hardenable alloy steel used to make the bucket wheel excavators, blades of bulldozers and other earth moving equipments contain iron, carbon and (A) Manganese (B) Silicon (C) Nickel (D) Chromium
Last Answer : (A) Manganese
Description : The yield strength and tensile strength of low carbon steel may be improved by the addition of (A) Manganese (B) Chromium (C) Nickel (D) Vanadium
Last Answer : Answer: Option D
Description : __________ is added in stainless steel to prevent inter crystal corrosion. (A) Vanadium (B) Niobium (C) Chromium (D) Nickel
Last Answer : (B) Niobium
Description : 18/8 stainless steel means, that it contains (A) 18% chromium and 8% nickel (B) 18% chromium and 8% molybdenum (C) 18% nickel and 8% chromium (D) 18% molybdenum and 8% chromium
Last Answer : (A) 18% chromium and 8% nickel
Description : For the manufacture of stainless steel, steel is mixed with (A) Chromium (B) Nickel (C) Tungsten (D) None of these
Last Answer : Answer: Option A
Description : Stainless steel contains (A) 18% of chromium and 8% nickel (B) 8% of chromium and 18% of nickel (C) 12% of chromium and 36% of nickel (D) 36% of chromium and 12% of nickel
Description : Principal alloying elements of cast tool alloys which have very high wear resistance & high temperature strength are (A) Cobalt, chromium & tungsten (B) Cobalt, chromium & nickel (C) Molybdenum, tungsten & chromium (D) Cobalt, zirconium & molybdenum
Last Answer : : Option A
Description : Tubes of multiple effect evaporator used for concentration of sugar cane juice are made of (A) Nickel (B) Copper (C) Stainless steel (D) Brass
Last Answer : (B) Copper
Description : Stainless steel contains which of the following? (a) Aluminium and Zinc (b) Chromium and Carbon (c) Zinc and Mercury (d) Copper and Cadmium
Last Answer : Ans:(b)
Description : The substances used in the manufacture of stainless steel are 1. Chromium 2. Iron 3. Copper 4. Steel The correct answers are: (a) 1 and 4 (b) 1, 2, 3 and 4 (c) 2, 3 and 4 (d) 1, 2 and 4
Last Answer : Ans:(a)
Description : Which metal is added to steel to make it stainless steel? A. Chromium (Answer) B. Aluminium C. Carbon D. Copper
Last Answer : A. Chromium (Answer)
Description : Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon
Last Answer : : Option B
Description : Which of the following alloying elements is present in maximum percentage in high speed steel? (A) Molybdenum (B) Chromium (C) Tungsten (D) Vanadium
Last Answer : (C) Tungsten
Description : Entire cell is enclosed by a steel casing that is protected usually by _____ and _____. • Nickel, chromium • Chromium, molybdenum • Aluminium, molybdenum • Nickel, aluminium
Last Answer : • Chromium, molybdenum
Description : Weld decay is caused by the formation of a compound with carbon. The other element in this compound is: a) Manganese b) Sulphur c) Chromium d) Nickel
Last Answer : c) Chromium
Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin
Last Answer : (D) Brass, cast iron, mild steel and tin
Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel
Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon
Description : Which of the following is the cheapest material of construction for the storage of sodium hydroxide upto a concentration of 75%? (A) Stainless steel (B) Plain carbon steel (C) Nickel (D) Copper
Last Answer : (B) Plain carbon steel
Description : Softness of silver can be converted into hardness by alloying it with small quantity of (A) Copper & nickel (B) Zinc (C) Aluminium (D) Tin
Last Answer : (A) Copper & nickel
Description : Principal alloying element in Elinvar (used for making hair springs for watches) is (A) Copper (B) Aluminium (C) Nickel (D) Zinc
Last Answer : Option C
Description : Pick out the wrong statement (A) Hardening makes the steel more brittle (B) High alloy steels contain more than 50% alloying element (C) 18/8 stainless steel is a magnetic steel (D) Both (B) and (C)
Last Answer : (D) Both (B) and (C)
Description : Manganite is an ore/mineral of ______. (1) Beryllium (2) Chromium (3) Manganese (4) Copper
Last Answer : (3) Manganese Explanation: Manganite is an ore mineral of manganese. As a manganese ore, it ranks after pyrolusite and romanechite.
Description : The metals commonly used for electroplating are – (1) Gold, Sodium and Chromium (2) Chromium, Copper and Nickel (3) Nickel, Lead and Chromium (4) Gold, Sodium and Potassium
Last Answer : (2) Chromium, Copper and Nickel Explanation: The process of electroplating takes place as metals in ionic form move from a positive to negative electrode. An electric current passing through the ... ability of metal objects. Plating protects by one of two ways, either sacrificially or mechanically.
Description : Why for chromium plating iron is firstly platted by copper or nickel?
Last Answer : Ans: Because chromium metal doesn’t adhere directly to the iron properly so it is firstly plated with nickel or copper.
Description : The metals commonly used for electroplating are (1) Gold, Sodium and Chromium (2) Chromium, Copper and Nickel (3) Nickel, Lead and Chromium (4) Gold, Sodium and Potassium
Last Answer : Chromium, Copper and Nickel
Description : The important metal used with iron to produce stainless steel is – (1) Al (2) Chromium (3) Tin (4) Carbon
Last Answer : (2) Chromium Explanation: Stainless steel is an alloy of iron with chromium. Chromium prevents its from corrosion. Stainless steel differs from carbon steel by the amount of chromium present.
Description : Stainless steel is an alloy of - (1) chromium and carbon (2) chromium, carbon and iron (3) chromium and iron (4) carbon and iron
Last Answer : (2) chromium, carbon and iron Explanation: Steel is an alloy made by combining iron and other elements, the most common of these being carbon. When carbon is used, its content in the steel ... 11% chromium content by mass. Stainless steel differs from carbon steel by the amount of chromium present.
Description : The important metal used with iron to produce stainless steel is (1) Aluminium (2) Chromium (3) Tin (4) Carbon
Last Answer : Chromium
Description : Stainless steel is an alloy of (1) chromium and carbon (2) chromium, carbon and iron (3) chromium and iron (4) carbon and iron
Last Answer : chromium, carbon and iron
Description : Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron
Last Answer : (B) Manganese
Description : A fuse wire is made of: (1) an alloy of tin and copper (2) an alloy of tin and lead (3) an alloy of tin and aluminium (4) an alloy of nickel and chromium
Last Answer : (2) an alloy of tin and lead Explanation: Electric fuse wire is an alloy made of tin (63 % lead 37 %. The cross sectional area determines the melting point at a certain current. Alloys (e.g. ... resulting combination of good conductivity (due to the tin) with a low melting point due to the lead).
Last Answer : an alloy of tin and lead
Description : Bullet proof glass is made of thick glass sheet sandwiched by a layer of (A) Steel (B) Stainless steel (C) High test plastic (D) Chromium plate
Last Answer : Answer: Option C