Explain The Effects Of Alloying Chromium And Nickel In Stainless Steel.?

Explain The Effects Of Alloying Chromium And Nickel In Stainless Steel.?
by

1 Answer

Answer :

The addition of nickel and chromium increases the tensile strength and increase in resistance to corrosion takes place.
by

Related questions

Explain the effects of alloying chromium and nickel in stainless steel.

Description : Explain the effects of alloying chromium and nickel in stainless steel.

Last Answer : Addition of nickel and chromium increases the tensile strength and increase in resistance to corrosion takes place.

Explain the effects of alloying chromium and nickel in stainless steel.

Description : Explain the effects of alloying chromium and nickel in stainless steel.

Last Answer : Addition of nickel and chromium increases the tensile strength and increase in resistance to corrosion takes place.

Stainless steel is usually made by alloying the steel with – (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper

Description : Stainless steel is usually made by alloying the steel with – (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper

Last Answer : (3) chromium and nickel Explanation: In metallurgy, stainless steel is defined as a steel alloy with a minimum of 10.5 per cent to 11 per cent chromium content by mass. There are ... virtually nonmagnetic and less brittle at low temperatures. For greater hardness and strength, more carbon is added.

Which of the following are alloying materials used the manufacture of stainless steel? w) Limestone and carbon x) Calcium oxide and oxygen y) Oxygen and sulfur dioxide z) Chromium and nickel

Description : Which of the following are alloying materials used the manufacture of stainless steel? w) Limestone and carbon x) Calcium oxide and oxygen y) Oxygen and sulfur dioxide z) Chromium and nickel

Last Answer : ANSWER: Z -- CHROMIUM AND NICKEL

Stainless steel is usually made by alloying the steel with (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper

Description : Stainless steel is usually made by alloying the steel with (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper

Last Answer : chromium and nickel 

Pick out the correct statement. (A) Stainless steel is nothing but chromium coated steel (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal (C) Plastic deformation of a material is its temporary distortion under the action of applied stress (D) Rusting of iron is not electrochemical in nature

Description : Pick out the correct statement. (A) Stainless steel is nothing but chromium coated steel (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal (C) ... its temporary distortion under the action of applied stress (D) Rusting of iron is not electrochemical in nature

Last Answer : (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal

Which of the following is not a principal alloying element for the structural steel? (A) Molybdenum (B) Nickel (C) Manganese (D) Chromium

Description : Which of the following is not a principal alloying element for the structural steel? (A) Molybdenum (B) Nickel (C) Manganese (D) Chromium

Last Answer : (A) Molybdenum

All of the following alloying elements of steel increases hardness but sacrifice ductility, except (A) Nickel (B) Vanadium (C) Molybdenum (D) Chromium

Description : All of the following alloying elements of steel increases hardness but sacrifice ductility, except (A) Nickel (B) Vanadium (C) Molybdenum (D) Chromium

Last Answer : (A) Nickel

Nickel and __________ are the alloying element added in steel to increase its toughness. (A) Molybdenum(B) Chromium(C) Vanadium(D) Silicon

Description : Nickel and __________ are the alloying element added in steel to increase its toughness. (A) Molybdenum (B) Chromium (C) Vanadium (D) Silicon

Last Answer : Option D

Alloying elements present in Haynes stellite, which has superior performance than high speed steel, are: (A) Nickel, cobalt & chromium (B) Tungsten, chromium & cobalt (C) Manganese, chromium & cobalt (D) Tungsten, molybdenum & nickel

Description : Alloying elements present in Haynes stellite, which has superior performance than high speed steel, are: (A) Nickel, cobalt & chromium (B) Tungsten, chromium & cobalt (C) Manganese, chromium & cobalt (D) Tungsten, molybdenum & nickel

Last Answer : Option B

Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium (4) Nickel

Description : Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium (4) Nickel

Last Answer : (2) Tungsten Explanation: Stainless steel is defined as a steel alloy of iron with a minimum of 10.5% to 11% chromium content by mass. There are different types of stainless steels: ... stabilized. This crystal structure makes such steels virtually non-magnetic and less brittle at low temperatures.

__________ is added in stainless steel to prevent inter crystal corrosion. (A) Vanadium (B) Niobium (C) Chromium (D) Nickel

Description : __________ is added in stainless steel to prevent inter crystal corrosion. (A) Vanadium (B) Niobium (C) Chromium (D) Nickel

Last Answer : (B) Niobium

Stainless steel contains (A) Chromium and nickel (B) Copper (C) Aluminium (D) Vanadium

Description : Stainless steel contains (A) Chromium and nickel (B) Copper (C) Aluminium (D) Vanadium

Last Answer : (A) Chromium and nickel

18/8 stainless steel means, that it contains (A) 18% chromium and 8% nickel (B) 18% chromium and 8% molybdenum (C) 18% nickel and 8% chromium (D) 18% molybdenum and 8% chromium

Description : 18/8 stainless steel means, that it contains (A) 18% chromium and 8% nickel (B) 18% chromium and 8% molybdenum (C) 18% nickel and 8% chromium (D) 18% molybdenum and 8% chromium

Last Answer : (A) 18% chromium and 8% nickel

For the manufacture of stainless steel, steel is mixed with (A) Chromium (B) Nickel (C) Tungsten (D) None of these

Description : For the manufacture of stainless steel, steel is mixed with (A) Chromium (B) Nickel (C) Tungsten (D) None of these

Last Answer : Answer: Option A

Stainless steel contains (A) 18% of chromium and 8% nickel (B) 8% of chromium and 18% of nickel (C) 12% of chromium and 36% of nickel (D) 36% of chromium and 12% of nickel

Description : Stainless steel contains (A) 18% of chromium and 8% nickel (B) 8% of chromium and 18% of nickel (C) 12% of chromium and 36% of nickel (D) 36% of chromium and 12% of nickel

Last Answer : Answer: Option A

________ is an alloy made from iron , chromium and nickel . a) stainless steel b)steel c)brass d)bronze

Description : ________ is an alloy made from iron , chromium and nickel . a) stainless steel b)steel c)brass d)bronze

Last Answer : a) stainless steel

Which of the following is an important element of stainless steel. w) chromium x) magnesium y) copper z) nickel

Description : Which of the following is an important element of stainless steel. w) chromium x) magnesium y) copper z) nickel  

Last Answer : ANSWER: W -- CHROMIUM  

Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium(4) Nickel

Description : Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium(4) Nickel

Last Answer : Tungsten

Hydrogen Cannot Be Removed Easily From Molten Steel. What Harm Hydrogen Has On Property Of Steel?

Description : Hydrogen Cannot Be Removed Easily From Molten Steel. What Harm Hydrogen Has On Property Of Steel?

Last Answer : Excessive hydrogen in molten steel results in the formation of small fissures often described as hairline cracks or flakes in the steel. Large forgings an alloy steel are particularly sensitive to this phenomenon.

How Oxygen Gas Can Be Removed From Steel During Melting? What Are Fully Killed Steel?

Description : How Oxygen Gas Can Be Removed From Steel During Melting? What Are Fully Killed Steel?

Last Answer : Oxygen gas can be removed from steel during melting by adding elements such as manganese, silicon or aluminium which, because of their high affinity for oxygen, react with it to form non-metallic ... Steels in which have has most of their dissolved oxygen removed are called fully killed steels'.

Which Element Is Added In Steel To Increase Resistance To Corrosion?

Description : Which Element Is Added In Steel To Increase Resistance To Corrosion?

Last Answer : Chromium.

A Plain Carbon Steel Has Brinell Hardness Number (bhn) Of 180. What Are The Values Of Rc, Vhn And Ultimate Strength?

Description : A Plain Carbon Steel Has Brinell Hardness Number (bhn) Of 180. What Are The Values Of Rc, Vhn And Ultimate Strength?

Last Answer : Rc = BHN/10 = 18, VHN = BHN = 180 Ultimate strength = 3.48 × BHN MPa = 620 MPa.

Presently most used metal in the world (a) Aluminium (b) Gold (c) Steel (d) Silver

Description : Presently most used metal in the world (a) Aluminium (b) Gold (c) Steel (d) Silver

Last Answer : (c) Steel 

Pick the composite from the list (a) Wood (b) Steel (c) Nylon (d) Mica

Description : Pick the composite from the list (a) Wood (b) Steel (c) Nylon (d) Mica

Last Answer : (a) Wood 

Principal alloying elements of cast tool alloys which have very high wear resistance & high temperature strength are (A) Cobalt, chromium & tungsten (B) Cobalt, chromium & nickel (C) Molybdenum, tungsten & chromium (D) Cobalt, zirconium & molybdenum

Description : Principal alloying elements of cast tool alloys which have very high wear resistance & high temperature strength are (A) Cobalt, chromium & tungsten (B) Cobalt, chromium & nickel (C) Molybdenum, tungsten & chromium (D) Cobalt, zirconium & molybdenum

Last Answer : : Option A

Which of the following alloying elements is present in maximum percentage in high speed steel? (A) Molybdenum (B) Chromium (C) Tungsten (D) Vanadium

Description : Which of the following alloying elements is present in maximum percentage in high speed steel? (A) Molybdenum (B) Chromium (C) Tungsten (D) Vanadium

Last Answer : (C) Tungsten

Which of the following alloying elements is present in maximum percentage in high speed steel? (A) Molybdenum (B) Chromium (C) Tungsten (D) Vanadium

Description : Which of the following alloying elements is present in maximum percentage in high speed steel? (A) Molybdenum (B) Chromium (C) Tungsten (D) Vanadium

Last Answer : (A) Molybdenum

Explain The Difference Between Pear Lite And Cementite?

Description : Explain The Difference Between Pear Lite And Cementite?

Last Answer : Pearlite is a eutectoid mixture of ferrite and cementite. Cementide is a chemical compound of iron and carbon.

Pick out the wrong statement (A) Hardening makes the steel more brittle (B) High alloy steels contain more than 50% alloying element (C) 18/8 stainless steel is a magnetic steel (D) Both (B) and (C)

Description : Pick out the wrong statement (A) Hardening makes the steel more brittle (B) High alloy steels contain more than 50% alloying element (C) 18/8 stainless steel is a magnetic steel (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

When A Material Is Known As Allotropy Or Polytropic?

Description : When A Material Is Known As Allotropy Or Polytropic?

Last Answer : A material is known as allotropic aur polytropic if it exists in several forms at a different temperature.

What Is Allot Rope? In What Forms Of Cubic Pattern, Iron Exists?

Description : What Is Allot Rope? In What Forms Of Cubic Pattern, Iron Exists?

Last Answer : Some elements exist in more than one crystalline form. Each crystalline form is known as ‘allotrope’ of the element. Iron exists in two crystalline forms of cubic pattern, namely, bodycentered cubic (BCC) and face-centered cubic (FCC).

For Which Parts The Wahl Factor And Lewis Factor Is Used?

Description : For Which Parts The Wahl Factor And Lewis Factor Is Used?

Last Answer : Wahl factor and Lewis factor is used for springs and gears respectively.

Give One Example Each Of The Following Proportion Of Materials – Dimensional, Physical, Technological And Mechanical?

Description : Give One Example Each Of The Following Proportion Of Materials – Dimensional, Physical, Technological And Mechanical?

Last Answer : Roughness, enthalpy, toughness and hardness respectively.

What Is The Name Of Solid Solution Of Carbon In Alpha-iron And Delta Iron?

Description : What Is The Name Of Solid Solution Of Carbon In Alpha-iron And Delta Iron?

Last Answer : Ferrite and Austenite respectively.

Give One Example Of Metal Classified As Per Structure As Bcc, Fcc, Hcp And Ccp?

Description : Give One Example Of Metal Classified As Per Structure As Bcc, Fcc, Hcp And Ccp?

Last Answer : Examples of BCC, FCC, HCP and CCP structures: BCC (Body Centred Cubic) structure – molybdenum; FCC (Face Centred Cubic) structure – Aluminum; HCP (Hexagonal Close Packed) structure – Zinc; CCP (Cubic Close Packing) structure – Copper.

Define Ceramic?

Description : Define Ceramic?

Last Answer : Ceramic is a solid formed by the combination of metallic and non-metallic elements.

What Does The Alloy Designation Fg 250 Indicate?

Description : What Does The Alloy Designation Fg 250 Indicate?

Last Answer : FG 250 alloy designation indicates Grey cast iron with a tensile strength of 250 MPa.

What Is The Common Element Between The Brass And Bronze Metal Alloys?

Description : What Is The Common Element Between The Brass And Bronze Metal Alloys?

Last Answer : Copper.

Which Theories Of Failure Are Used For? (a) Ductile Materials (b) Brittle Materials?

Description : Which Theories Of Failure Are Used For? (a) Ductile Materials (b) Brittle Materials?

Last Answer : For ductile materials, theories of failure used are maximum shear stress theory and maximum energy of distortion theory; For brittle materials, the theory of maximum principal stress and maximum strain are used.

List At Least Two Factors That Promote The Transition From Ductile To Brittle Fracture?

Description : List At Least Two Factors That Promote The Transition From Ductile To Brittle Fracture?

Last Answer : The manner of loading and the rate of loading promote the transition from ductile to brittle fracture. A machine member may have ductile failure under static loading but may fail in brittle fashion when the ... testing speed, but if the load is applied at a high velocity then failure may be brittle.

While Normal Carburizing And Nit Riding Surface Treatments Increase Fatigue Strength, Excessive Treatment May Decrease The Fatigue Strength. Why?

Description : While Normal Carburizing And Nit Riding Surface Treatments Increase Fatigue Strength, Excessive Treatment May Decrease The Fatigue Strength. Why?

Last Answer : Normal carburizes/nits riding treatments increases volume due to phase transformation at the surface and introduce residual compressive surface stress and thus increases fatigue strength. By excessive treatment, the ... in the regions of the high tensile stress and lead o early fatigue failure.

Distinguish Between Creep And Fatigue?

Description : Distinguish Between Creep And Fatigue?

Last Answer : Creep is low and progressive deformation of a material with time under a constant stress at high-temperature applications. Fatigue is the reduced tendency of material to offer resistance to applied stress under repeated or fluctuating loading condition.

Why Fatigue Strength Decreases As Size Of A Part Increases Beyond Around 10mm?

Description : Why Fatigue Strength Decreases As Size Of A Part Increases Beyond Around 10mm?

Last Answer : The perfection of material conditions is possible at lower sizes, and as size increases, it is not possible to attain a uniform structure of the material.

Why Is It That The Maximum Value Which The Residual Stress Can Reach Is The Elastic Limit Of The Material?

Description : Why Is It That The Maximum Value Which The Residual Stress Can Reach Is The Elastic Limit Of The Material?

Last Answer : A stress more than the elastic limit, with no external force to oppose it, we relieve itself by plastic deformation until it reaches the value of the yield stress.

Whether Individual Components In Composite Materials Retain Their Characteristics Or Not?

Description : Whether Individual Components In Composite Materials Retain Their Characteristics Or Not?

Last Answer : Yes.

What Is The Percentage Of Carbon In Cast Iron?

Description : What Is The Percentage Of Carbon In Cast Iron?

Last Answer : 2.5%.

Specific Strength Of Materials Is Very High When They Are In Fibre Size But Lower When They Are In Bar Form - Why?

Description : Specific Strength Of Materials Is Very High When They Are In Fibre Size But Lower When They Are In Bar Form - Why?

Last Answer : The crystal structure has ordered, repeating arrangement of atoms. Fibers are liable to maintain this and thus have high specific strength. As for size increases, the condition of ordered and ... because of several types of defects and dislocations, and thus the specific strength gets lower.

What Is Curie Point?

Description : What Is Curie Point?

Last Answer : Curie point is the temperature at which ferromagnetic materials can no longer be magnetized by outside forces.

What Are The Principal Constituents Of Brass?

Description : What Are The Principal Constituents Of Brass?

Last Answer : Principal constituents of brass are copper and zinc.