Tubes of multiple effect evaporator used for concentration of sugar
cane juice are made of
(A) Nickel
(B) Copper
(C) Stainless steel
(D) Brass

1 Answer

Answer :

(B) Copper

Related questions

Description : Evaporator used for concentrating tomato juice is made of (A) Nickel (B) Brass (C) Stainless steel-glass lined (D) Cast iron-rubber lined

Last Answer : (C) Stainless steel-glass lined

Description : The material of construction of pressure mills used for squeezing out the juice from sugar cane is (A) Stainless steel (B) Cast iron (C) Mild steel (D) Monel

Last Answer : (B) Cast iron

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

Description : Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in ... a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Last Answer : (C) Duhring's plot is used for calculating the concentration of solution

Description : Which of the following is the cheapest material of construction for the storage of sodium hydroxide upto a concentration of 75%? (A) Stainless steel (B) Plain carbon steel (C) Nickel (D) Copper

Last Answer : (B) Plain carbon steel

Description : Which of the following is the most suitable material of construction for evaporator & its tubes for concentrating NaOH solution to 70%? (A) Cast iron (B) Steel (C) Nickel (D) Karbate

Last Answer : (C) Nickel

Description : ________ is an alloy made from iron , chromium and nickel . a) stainless steel b)steel c)brass d)bronze

Last Answer : a) stainless steel

Description : SO2 is bubbled through hot sugar cane juice to (A) Act as an acidifying agent (B) Increase its concentration (C) Increase the amount of molasses (D) Increase the crystal size

Last Answer : (A) Act as an acidifying agent

Description : Heat exchanger tubes are never made of (A) Plain carbon steel (B) Stainless steel (C) Lead (D) Copper

Last Answer : (C) Lead

Description : For ammonia refrigerating systems, the tubes of a shell and tube condenser are made of (a) copper (b) aluminium (c) steel (d) brass

Last Answer : Ans: c

Description : Which of the following materials has the least scrap value? (A) Aluminium (B) Stainless steel (C) Brass (D) Copper

Last Answer : Option B

Description : Anodic material used for the cathodic protection of underground buried steel pipeline is (A) Nickel or copper (B) Zinc or magnesium (C) Bronze (D) Brass

Last Answer : (B) Zinc or magnesium

Description : Which of the following is the most suitable material of construction for the condenser tubes, where the cooling medium is brine (salty water)? (A) Aluminium (B) Copper (C) Titanium (D) Stainless steel

Last Answer : Option C

Description : Stainless steel is usually made by alloying the steel with – (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper

Last Answer : (3) chromium and nickel Explanation: In metallurgy, stainless steel is defined as a steel alloy with a minimum of 10.5 per cent to 11 per cent chromium content by mass. There are ... virtually nonmagnetic and less brittle at low temperatures. For greater hardness and strength, more carbon is added.

Description : Stainless steel is usually made by alloying the steel with (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper

Last Answer : chromium and nickel 

Description : Stainless steel contains (A) Chromium and nickel (B) Copper (C) Aluminium (D) Vanadium

Last Answer : (A) Chromium and nickel

Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon

Description : Steam condenser tubes are made of admiralty brass, in which percentage of zinc & copper are __________ respectively. (A) 70 & 30 (B) 30 & 70 (C) 50 & 50 (D) 90 & 10

Last Answer : (A) 70 & 30

Description : Vacuum is generally maintained in the vapour space of an evaporator mainly to (A) Get economical temperature difference by using moderate pressure steam (B) Facilitate forward ... (C) Concentrate heat sensitive materials (D) Achieve very high concentration of the final product

Last Answer : (A) Get economical temperature difference by using moderate pressure steam

Description : A multiple effect evaporator as compared to a single effect evaporator of the same capacity has (A) Lower heat transfer area (B) Lower steam economy (C) Higher steam economy (D) Higher solute concentration in the product

Last Answer : (C) Higher steam economy

Description : Which of the following is an important element of stainless steel. w) chromium x) magnesium y) copper z) nickel  

Last Answer : ANSWER: W -- CHROMIUM  

Description : Pick out the wrong statement. (A) Economy of a multiple effect evaporator is not influenced by the boiling point elevation (B) Two identical cubes of iron and copper will have the same heat ... in the field of refrigeration (D) Finned tube heat exchangers are suitable for heating air by steam

Last Answer : (B) Two identical cubes of iron and copper will have the same heat content under the same conditions of temperature

Description : . Sucrose content in the raw juice extracted from sugar cane is about __________ percent (B) 15 - 20 (A) 1 - 2285 (C) 50 - 60 (D) 80 - 85

Last Answer : (B) 15 - 20

Description : High magnesia lime is added to hot sugar cane juice (during the manufacture of sugar) to (A) Flocculate the impurities (B) Facilitate fast filtration (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin

Description : Dry chlorine can be handled in a vessel made of (A) Iron or steel (B) PVC (C) Nickel (D) Brass

Last Answer : (A) Iron or steel

Description : Locomotive boiler tubes are made of __________ alloys. (A) Arsenic copper (B) Magnesium (C) Aluminium (D) Nickel

Last Answer : (A) Arsenic copper

Description : Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron

Last Answer : (B) Manganese

Description : Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Last Answer : (C) High corrosion resistance

Description : Beams of hyperbolic cooling towers are made up of a) Tungsten b) Iron c) Stainless steel d) Brass

Last Answer : c) Stainless steel

Description : Soap kettle used in the production of laundry soap is made of (A) Steel with top section nickel clad or stainless steel (B) Cast iron (C) Nickel (D) Concrete

Last Answer : (A) Steel with top section nickel clad or stainless steel

Description : Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Last Answer : (A) Stainless steel or glass lined steel

Description : Brass is an alloy of (A) Nickel and tin (B) Copper and zinc

Last Answer : (B) Copper and zinc

Description : Which of the following commonly used condenser tube materials has the lowest thermal conductivity? (A) Admiralty brass (B) Stainless steel (C) Aluminium brass (D) Titanium

Last Answer : (B) Stainless steel

Description : Brass is an alloy of - (1) Nickel and Copper (2) Copper and Silver (3) Nickel and Zinc (4) Zinc and Copper

Last Answer : (4) Zinc and Copper Explanation: Brass is an alloy of copper and zinc, in proportions which can be varied to achieve varying mechanical and electrical properties.

Description : Brass contains – (1) Copper and Zinc (2) Copper and Tin (3) Copper and Silver (4) Copper and Nickel

Last Answer : (1) Copper and Zinc Explanation: Brass is an alloy made of copper and zinc; the proportions of zinc and copper can be varied to create a range of brasses with varying properties. By comparison, bronze is principally an alloy of copper and tin.

Description : German silver is an alloy of (A) Zinc, lead and nickel (B) Silver, gold and lead (C) Copper, nickel and zinc (D) Copper, brass and zinc

Last Answer : Answer: Option C

Description : Brass is an alloy of (A) Copper and zinc (B) Zinc and lead (C) Tin and silver (D) Zinc and nickel

Last Answer : Answer: Option A

Description : Brass contains (1) Copper and Zinc (2) Copper and Tin (3) Copper and Silver (4) Copper and Nickel

Last Answer :  Copper and Zinc

Description : Alinco, which is a aluminium-cobalt-nickel steel, is used for making (A) Surgical instruments (B) Powerful magnets (C) Chemical equipments (D) Boiler tubes

Last Answer : (B) Powerful magnets

Description : Dip stick used for measuring the level of petro fuels (e.g. petrol, diesel, fuel oil etc.) in the storage tank is usually made of (A) Brass (B) Copper (C) High carbon steel (D) Aluminium

Last Answer : (A) Brass

Description : Temperature of hot gases flowing in a pipe is measured by a thermocouple inserted in the thermal well. The thermal well made of __________ will facilitate the most accurate measurement of the temperature. (A) Copper (B) Steel (C) Aluminium (D) Brass

Last Answer : Option A

Description : Temperature of hot gases flowing in a pipe is measured by a thermocouple inserted in the thermal well. The thermal well made of __________ will facilitate the most accurate measurement of the temperature. (A) Copper (B) Steel (C) Aluminium (D) Brass

Last Answer : Option A

Description : A suitable material of construction to use with fuming sulphuric acid is (A) Carbon steel (B) Stainless steel type 304 (C) Nickel (D) Monel

Last Answer : (D) Monel

Description : __________ is added in stainless steel to prevent inter crystal corrosion. (A) Vanadium (B) Niobium (C) Chromium (D) Nickel

Last Answer : (B) Niobium

Description : A steel alloy containing 36% nickel is called __________, which has a zero co-efficient of expansion. (A) Austenitic stainless steel (B) Heat resisting steel (C) Invar (D) High speed steel

Last Answer : (C) Invar

Description : For handling sulphuric acid of 95% strength, the suitable material of construction for pipes is (A) Stainless steel (B) Cast iron (C) Aluminium (D) Nickel

Last Answer : (B) Cast iron

Description : 18/8 stainless steel means, that it contains (A) 18% chromium and 8% nickel (B) 18% chromium and 8% molybdenum (C) 18% nickel and 8% chromium (D) 18% molybdenum and 8% chromium

Last Answer : (A) 18% chromium and 8% nickel

Description : Condenser tubes are not made of (A) Cartridge brass (B) Muntz brass (C) Wood metal (D) Aluminium brass alloy

Last Answer : (C) Wood metal

Description : Thermometer bulb & capillary in case of mercury filled pressure spring expansion thermometer is normally made of __________ as mercury does not amalgamate with it. (A) Copper (B) Copper alloys (C) Stainless steel (D) Monel

Last Answer : (C) Stainless steel