Description : Is there anywhere in Edinburgh, Scotland, I can buy brushless motors?
Last Answer : It appears that Claremont Electric Motors and AD Auto Electrics are two places that would either carry brushless motors or at least provide you with information on where you can buy brushless motors.
Description : Where can I learn how to repair a brushless motor?
Last Answer : You can actually learn how to repair a brushless motor online. First for some background and tips read this message board string (http://www.rcgroups.com/forums/showthread.php?t=419334). There are also ... that show you how to begin fixing your motor (http://www.youtube.com/watch?v=I6GCyLm7mIw)
Description : Which of the following statements, concerning the general maintenance of a brushless generator, is correct? A. Paint should be applied to insulating surfaces on an annual basis. B. Alcohol should be used to ... . D. Accessible generator parts should be wiped with a clean dry rag on a periodic basis.
Last Answer : Answer: D
Description : Brushless generators are designed to operate without the use of ___________. A. brushes B. slip rings C. commutators D. all of the above
Description : What is brushless DC motor?
Last Answer : An inverter fed trapezoidal permanent magnet AC motor drive operating in self-controlled mode is called brushless dc motor.
Description : What are the parts of a brushless AC generator?
Last Answer : Yoke, armature, stator, rotor, primary exciter, main exciter, rotary diode rectifier assembly, impeller, bearing & housing, end cover, terminal block, AVR.
Description : State any two applications of brushless DC motor.
Last Answer : 1) Synthetic fibre drawing works. 2) Turn table drives in record players. 3) Spindle drives in hard disk circuits. 4) Computer peripheral equipments as plotters etc. 5) Gyroscope motors. 6) Biomedical machines as heart pumps.
Description : With the help of necessary sketch, explain in brief the working of brushless DC motor.
Last Answer : Constructional Diagram of Brushless DC Motor: Working of brushless DC motor: The brushless DC motor is the combination of a permanent excited synchronous motor and a frequency ... Suitable PWM techniques allow regenerative breaking, which increases dynamic and efficiency of the drive.
Description : What is Brushless DC Motor (BLDC) ?
Last Answer : Brushless DC Motor (BLDC) The motor is made up of rotor and stator . In BLDC motor the rotor is a ferromagnetic material (permanent magnet). The rotor may be ... winding gives low torque at low speed and start winding gives high torque at low speed.
Description : Advantages and Disadvantages of Permanent Magnet Brushless DC (PMBLDC) Motor
Last Answer : Advantages and Disadvantages of Permanent Magnet Brushless DC (PMBLDC) Motor
Description : Lemon flavored vodka for screwdriver?
Last Answer : I doubt that it would make much discernible difference in a screwdriver. Maybe a little more tart. The citron would be a nice punch to a Bloody Mary. Personally, I love lemon and think it would be a nice addition to most mixed vodka drinks. Better that the orange.
Description : If you were to be personified as a hand tool, I.E. combination wrench, screwdriver, etc. what tool would you be?
Last Answer :
Description : Is this oscillator adjustable with a screwdriver, and where is the link to prchase it?
Last Answer : answer:@XOIIO Probably a question you should direct to the company. The link below should help. http://www.vectron.com/contact/index.htm
Description : Where can I get this unusual screwdriver?
Last Answer : answer:Try this: http://www.mcmaster.com/#7266a29/=5z17i5 The other option would be to drill out the screws with something like this: http://www.mcmaster.com/#53405a41/=5z18pa
Description : How do I release a screw whose head is flush with the surface and the notch is so worn down that the screwdriver can't make contact?
Last Answer : Sometimes I have had success re- tapping the head of the screw. Using a hammer and screwdriver like a chisel. Also a but of wd-40 under the screw helps.
Description : What is a round pattern screwdriver?
Last Answer : A hand tool is any tool that is powered by hand
Description : I ripped a screw in the hole. How do I take it out? You can't drill.
Last Answer : Drill only with a diamond drill.
Description : For the parkside PAS 7.2 A1 cordless screwdriver, two resistors burned next to the C +, C- supply. Does anyone have the opportunity to read the values on these resistors?
Last Answer : If the colors can be recognized, try the page with the possibility of entering the detected colors: Color marking of resistors, code marking of capacitors
Description : Is a screwdriver a kind of wheel and axle?
Last Answer : Need answer
Description : Who uses screwdriver and a insulating tape?
Last Answer : It is a ELECTRICIAN
Description : Why is the best to use the right size of Philips type screwdriver?
Last Answer : The wrong one won't engage the whole screw head, which increasesthe risk of stripping out the star pattern when you try totighten/undo the screw. And w/o the star pattern, tightening orremoving the screw becomes quite hard.
Description : What do you need a torx screwdriver for?
Last Answer : Torx screwdrivers are usually used in small electronics like computers and phones.
Description : What is a good brand of screwdriver set for an auto mechanic?
Last Answer : Black & Decker is a good brand of screwdriver set for an auto mechanic.
Description : Can you install a TV wall mount with just a screwdriver?
Last Answer : To install a TV wall mount, an electric screwdriver or drill is recommended in order to get through into the stud.
Description : What are the recommended screwdriver types for furniture repair and construction?
Last Answer : Most types which would be appropriate for this purpose are familiar names. Phillips, Flat Head, Cabinet, Robertson, Star, Hex, Clutch Head and Nut Driver, for example. Get an interchangeable bit set ... the Tack Claw. However, which type you require will depend entirely on what you are building.
Description : How do I keep my cordless screwdriver from stripping screw heads?
Last Answer : The best thing to do is to not drill the screw heads to far down, since it will have a tendency to strip the screw heads, you should also consider making sure you item is prefectly mounted due to the problems of the screw.
Description : What is the best flat-head/phillip's head combonation screwdriver?
Last Answer : The Ace Hardware store-brand combo screwdriver is excellent and durable.
Description : When replacing fuses, always make sure _______________. A. to stand on a rubber mat and use rubber gloves B. to use insulated pliers or screwdriver C. the fuse clips are straight, tight, and in good contact D. to increase the fuse rating 10% to guard against 'nuisance blowing'
Last Answer : Answer: C
Description : Before touching a small capacitor connected to a de-energized circuit, or even one that is completely disconnected, you should ____________. A. gently tap the body with a screwdriver B. tag it ... insulated fuse puller D. short circuit the terminals to make sure that the capacitor is discharged
Description : A tubular fuse should always be removed from a fuse panel with _____________. A. a screwdriver B. a pair of insulated metal pliers C. any insulated object D. fuse pullers
Description : Secondary tillage implements are and . A) Hammer and screwdriver. C) Tractor and bullock B) Lathe and drilling machines. D) All of the above
Last Answer : Tractor and bullock
Description : Which screwdriver to choose?
Last Answer : Which screwdriver to choose? As you know, the choice of a screwdriver is carried out based on its filling, as well as the needs of the buyer himself. Some of the most popular products in this area ... will be a poor and not very convenient solution, while a standard drill is the best one can offer.
Description : Why a cat becomes negative charge when it is brushed.how does the electric charge on the brush compare to the charge on the cat?
Last Answer : Because they become negative
Description : The insulation resistance of electric equipment and machinery should be tested for the lowest normal insulation values _____________. A. immediately after shutting down the machine B. every time the brush rigging is ... starting up the machine D. every 30 days whether the machine is in use or not
Last Answer : Answer: A
Description : On some diesel-electric ships, the DC propulsion motor will only attain half speed when the generator fields are fully excited. Speeds above this are obtained by _____________. A. rotating brush ... B. raising the generator engine speed C. lowering the generator engine speed D. decreasing excitation
Last Answer : Answer: B
Description : Is it a good idea to brush teeth exclusively with baking soda over the long term?
Last Answer : I’m not sure about this but I believe that it is too abrasive to use over the long term. It would wear down the enamel on your teeth. Once in a while is okay though.
Description : What is it called to brush or pour liquid over food as it cooks?
Description : If you are interested to buy a brush with toothpaste but shopkeeper denied selling toothpaste only. -SST 10th
Last Answer : In this case Right to choose is being violated by the seller.
Description : Do you know where I can buy a car wash brush?
Last Answer : You can purchase a car wash brush at almost any auto part store. Also, the big box department stores almost always have them in stock. The ones with soft bristles are best so you do not scratch your paint.
Description : Why don't we have to use a new toothbrush every time we brush?
Last Answer : answer:We can do anything we want. The germs are in your mouth and are happy and productive. Rinse the brush with warm water. Replace when the bristles get squishy. We don’t replace our hands but we do wash them regularly.
Description : Why do we brush our teeth?
Last Answer : To remove minute food particles,reduce the build-up of plaqueand freshen breath.
Description : So far I have known so, but a paint shop salesman says just less.
Last Answer : It's not a good idea to use a roller on a smaller surface because it absorbs a lot of paint that doesn't pay off on a small surface. On the other hand, from the point of view of ... loss that cannot be squeezed out of it is negligible. The surface painted with a roller is also more beautiful.
Description : Where can I find more information on brush hog?
Last Answer : Information on brush hogs can be found in many places on the internet. A brush hog is a mower tool, instead of the traditional fixed rigid blades these blades are attached to the back of a ... damaging the blades more information can be at the official Brush Hog website http://www.bushhog.com/
Description : For more complete vessel protection when using an impressed current cathodic system _____________. A. all ship's service alternators have additional temperature sensing devices and a thermal recorder ... with the hull and the propeller shaft is grounded through a slip ring/brush arrangement
Description : In a D.C. machine the current per brush arm should not be more than (a) 100 A (6) 200 A (e) 300 A (d) 400 A
Last Answer : (d) 400 A
Description : Is henna more preferred over chemical hair dye?
Last Answer : Henna is more gentle on the hair but smells awful and offers only a limited range of colors.
Description : Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the ... of liquid, problem of channelling, loading & flooding is generally encountered in packed towers
Last Answer : (C) Diameter of randomly packed tower is normally more than 1.2 metres
Description : Partial bearing is preferred over journal bearing. a) True b) No c) More friction losses d) Can’t be determined
Last Answer : a) True
Description : Which of the following is false? a) The more important the data, the greater the need for backing it up b) A backup is as useful as its associated restore strategy c) Storing the ... near to its original site is best strategy d) Automated backup and scheduling is preferred over manual operations
Last Answer : Storing the backup copy near to its original site is best strategy