Who uses screwdriver and a insulating tape?

Who uses screwdriver and a insulating tape?
by

1 Answer

Answer :

It is a ELECTRICIAN
by
selected by

Related questions

Which of the following statements best describes the material known as varnished cambric? A. Felted asbestos sealed with varnish. B. Cotton cloth coated with insulating varnish. C. Rubber insulation coated with a layer of tin. D. Paper impregnated with mineral oil, specially wrapped with nonmetallic tape, and coated with varnish.

Description : Which of the following statements best describes the material known as varnished cambric? A. Felted asbestos sealed with varnish. B. Cotton cloth coated with insulating varnish. C. Rubber ... Paper impregnated with mineral oil, specially wrapped with nonmetallic tape, and coated with varnish.

Last Answer : Answer: B

Lemon flavored vodka for screwdriver?

Description : Lemon flavored vodka for screwdriver?

Last Answer : I doubt that it would make much discernible difference in a screwdriver. Maybe a little more tart. The citron would be a nice punch to a Bloody Mary. Personally, I love lemon and think it would be a nice addition to most mixed vodka drinks. Better that the orange.

If you were to be personified as a hand tool, I.E. combination wrench, screwdriver, etc. what tool would you be?

Description : If you were to be personified as a hand tool, I.E. combination wrench, screwdriver, etc. what tool would you be?

Last Answer :

Is this oscillator adjustable with a screwdriver, and where is the link to prchase it?

Description : Is this oscillator adjustable with a screwdriver, and where is the link to prchase it?

Last Answer : answer:@XOIIO Probably a question you should direct to the company. The link below should help. http://www.vectron.com/contact/index.htm

Where can I get this unusual screwdriver?

Description : Where can I get this unusual screwdriver?

Last Answer : answer:Try this: http://www.mcmaster.com/#7266a29/=5z17i5 The other option would be to drill out the screws with something like this: http://www.mcmaster.com/#53405a41/=5z18pa

How do I release a screw whose head is flush with the surface and the notch is so worn down that the screwdriver can't make contact?

Description : How do I release a screw whose head is flush with the surface and the notch is so worn down that the screwdriver can't make contact?

Last Answer : Sometimes I have had success re- tapping the head of the screw. Using a hammer and screwdriver like a chisel. Also a but of wd-40 under the screw helps.

What is a round pattern screwdriver?

Description : What is a round pattern screwdriver?

Last Answer : A hand tool is any tool that is powered by hand

How to take out a broken screwdriver

Description : I ripped a screw in the hole. How do I take it out? You can't drill.

Last Answer : Drill only with a diamond drill.

The parkside PAS 7.2 A1 cordless screwdriver burned two resistors next to the Cˇ, C- inlet. Does anyone have the opportunity to read the values ​​on these resistors?

Description : For the parkside PAS 7.2 A1 cordless screwdriver, two resistors burned next to the C +, C- supply. Does anyone have the opportunity to read the values ​​on these resistors?

Last Answer : If the colors can be recognized, try the page with the possibility of entering the detected colors: Color marking of resistors, code marking of capacitors

Is a screwdriver a kind of wheel and axle?

Description : Is a screwdriver a kind of wheel and axle?

Last Answer : Need answer

Why is the best to use the right size of Philips type screwdriver?

Description : Why is the best to use the right size of Philips type screwdriver?

Last Answer : The wrong one won't engage the whole screw head, which increasesthe risk of stripping out the star pattern when you try totighten/undo the screw. And w/o the star pattern, tightening orremoving the screw becomes quite hard.

Why is the best to use the right size of Philips type screwdriver?

Description : Why is the best to use the right size of Philips type screwdriver?

Last Answer : The wrong one won't engage the whole screw head, which increasesthe risk of stripping out the star pattern when you try totighten/undo the screw. And w/o the star pattern, tightening orremoving the screw becomes quite hard.

What do you need a torx screwdriver for?

Description : What do you need a torx screwdriver for?

Last Answer : Torx screwdrivers are usually used in small electronics like computers and phones.

What is a good brand of screwdriver set for an auto mechanic?

Description : What is a good brand of screwdriver set for an auto mechanic?

Last Answer : Black & Decker is a good brand of screwdriver set for an auto mechanic.

Can you install a TV wall mount with just a screwdriver?

Description : Can you install a TV wall mount with just a screwdriver?

Last Answer : To install a TV wall mount, an electric screwdriver or drill is recommended in order to get through into the stud.

What are the recommended screwdriver types for furniture repair and construction?

Description : What are the recommended screwdriver types for furniture repair and construction?

Last Answer : Most types which would be appropriate for this purpose are familiar names. Phillips, Flat Head, Cabinet, Robertson, Star, Hex, Clutch Head and Nut Driver, for example. Get an interchangeable bit set ... the Tack Claw. However, which type you require will depend entirely on what you are building.

How do I keep my cordless screwdriver from stripping screw heads?

Description : How do I keep my cordless screwdriver from stripping screw heads?

Last Answer : The best thing to do is to not drill the screw heads to far down, since it will have a tendency to strip the screw heads, you should also consider making sure you item is prefectly mounted due to the problems of the screw.

What is the best flat-head/phillip's head combonation screwdriver?

Description : What is the best flat-head/phillip's head combonation screwdriver?

Last Answer : The Ace Hardware store-brand combo screwdriver is excellent and durable.

Why brushless screwdriver is more preferred over brush screwdriver. From where we can buy best electric screwdriver.?

Description : Why brushless screwdriver is more preferred over brush screwdriver. From where we can buy best electric screwdriver.?

Last Answer : Brushless screwdriver has low noise low vibration and do not have the sparking issue . Brush screwdriver may give low torque after carbon brush damage.We can get best electric screwdriver from Microntech engineers . They provide kilews screwdriver

When replacing fuses, always make sure _______________. A. to stand on a rubber mat and use rubber gloves B. to use insulated pliers or screwdriver C. the fuse clips are straight, tight, and in good contact D. to increase the fuse rating 10% to guard against 'nuisance blowing'

Description : When replacing fuses, always make sure _______________. A. to stand on a rubber mat and use rubber gloves B. to use insulated pliers or screwdriver C. the fuse clips are straight, tight, and in good contact D. to increase the fuse rating 10% to guard against 'nuisance blowing'

Last Answer : Answer: C

Before touching a small capacitor connected to a de-energized circuit, or even one that is completely disconnected, you should ____________. A. gently tap the body with a screwdriver B. tag it with a de-energized tag C. be equipped with an insulated fuse puller D. short circuit the terminals to make sure that the capacitor is discharged

Description : Before touching a small capacitor connected to a de-energized circuit, or even one that is completely disconnected, you should ____________. A. gently tap the body with a screwdriver B. tag it ... insulated fuse puller D. short circuit the terminals to make sure that the capacitor is discharged

Last Answer : Answer: D

A tubular fuse should always be removed from a fuse panel with _____________. A. a screwdriver B. a pair of insulated metal pliers C. any insulated object D. fuse pullers

Description : A tubular fuse should always be removed from a fuse panel with _____________. A. a screwdriver B. a pair of insulated metal pliers C. any insulated object D. fuse pullers

Last Answer : Answer: D

Secondary tillage implements are and . A) Hammer and screwdriver. C) Tractor and bullock B) Lathe and drilling machines. D) All of the above

Description : Secondary tillage implements are and . A) Hammer and screwdriver. C) Tractor and bullock B) Lathe and drilling machines. D) All of the above

Last Answer : Tractor and bullock

Which screwdriver to choose?

Description : Which screwdriver to choose?

Last Answer : Which screwdriver to choose? As you know, the choice of a screwdriver is carried out based on its filling, as well as the needs of the buyer himself. Some of the most popular products in this area ... will be a poor and not very convenient solution, while a standard drill is the best one can offer.

A young woman owns two horses, a plane, a gun, a tape with many markings, and a machine with sharp teeth which she uses almost every day. She does not use any of these for transportation or for self-defense (although the gun is loaded), but she does rely on all of these items to meet her financial needs. What does this young woman do for a living, and why does she need this strange assortment of objects? -Riddles

Description : A young woman owns two horses, a plane, a gun, a tape with many markings, and a machine with sharp teeth which she uses almost every day. She does not use any of these for transportation or ... does this young woman do for a living, and why does she need this strange assortment of objects? -Riddles

Last Answer : The young woman is a carpenter. She uses her two sawhorses, her carpenter’s plane, her nail gun, her tape measure, and her circular saw almost every day as she works to earn a living.

Who uses a screw and an insulting tape beginning with e?

Description : Who uses a screw and an insulting tape beginning with e?

Last Answer : Feel Free to Answer

What are the primary uses of pinstripe tape?

Description : What are the primary uses of pinstripe tape?

Last Answer : Duct Tape is a great to to seal off a HVAC duct. The tape is strong and works effectively for your needs. Duct tape can offer a tight seal for your duct.

An output device that uses words or messages recorded on a magnetic medium to produce audio response is A) Magnetic tape B) Voice response unit C) Voice recognition unit D) Voice band

Description : An output device that uses words or messages recorded on a magnetic medium to produce audio response is A) Magnetic tape B) Voice response unit C) Voice recognition unit D) Voice band

Last Answer : Answer : B

An output device that uses words or messages recorded on a magnetic medium to produce audio response is b. Magnetic tape c. Voice response unit d. Voice recognition unit e. Voice band

Description : An output device that uses words or messages recorded on a magnetic medium to produce audio response is b. Magnetic tape c. Voice response unit d. Voice recognition unit e. Voice band

Last Answer : Voice response unit

An output device that uses words or messages recorded on a magnetic medium to produce audio response is b. Magnetic tape c. Voice response unit d. Voice recognition unit e. Voice band

Description : An output device that uses words or messages recorded on a magnetic medium to produce audio response is b. Magnetic tape c. Voice response unit d. Voice recognition unit e. Voice band

Last Answer : d. Voice recognition unit

An output device that uses words or messages recorded on a magnetic medium to produce audio response is b. Magnetic tape c. Voice response unit d. Voice recognition unit e. Voice band

Description : An output device that uses words or messages recorded on a magnetic medium to produce audio response is b. Magnetic tape c. Voice response unit d. Voice recognition unit e. Voice band

Last Answer : b. Magnetic tape

Which insulation is best for insulating root cellar?

Description : Which insulation is best for insulating root cellar?

Last Answer : First, what part of the country are you in? In Utah (where I last saw a root cellar) had a dirt floor, so humidity from the ground could help keep the vegetables humidified. If you are ... but many enter from the outside. http://www.organicgardening.com/learn-and-grow/building-root-cellar-your-home

Does anyone here keep ferrets? I have a question about winter insulating?

Description : Does anyone here keep ferrets? I have a question about winter insulating?

Last Answer : Can you bring them into your home or basement at all? How cold does it get during your winters? Here in Wis I’d need a shed or hen house type structure to thoroughly keep them warm enough. (Personally if I had any they’d be indoors)

What is the effect of heat on insulating material ?

Description : What is the effect of heat on insulating material ?

Last Answer : With increasing temperature, the resistance of almost all solid insulators except Avro decreases. When the temperature drops again, the resistance increases.

Why glass is insulating ?

Description : Why glass is insulating ?

Last Answer : Glass is insulating so that electricity cannot flow through the glass

What are the benefits of insulating with foam board?

Description : What are the benefits of insulating with foam board?

Last Answer : Foam board is generally used for acoustic insulation. If you're doing something noisy such as playing band instruments in a residential area, the benefit is that the foam will let you do so without violating ... in the rest of the house. Some people put them in basements and practice with a band.

Biological functions of lipids include (A) Source of energy (B) Insulating material (C) Maintenance of cellular integrity (D) All of these

Description : Biological functions of lipids include (A) Source of energy (B) Insulating material (C) Maintenance of cellular integrity (D) All of these

Last Answer : Answer : D

In multi stage compressor, the isothermal compression is achieved by A. Employing intercooler B. By constantly cooling the cylinder C. By running compressor at very slow speed D. By insulating the cylinder

Description : In multi stage compressor, the isothermal compression is achieved by A. Employing intercooler B. By constantly cooling the cylinder C. By running compressor at very slow speed D. By insulating the cylinder

Last Answer : ANSWER : C

Which of the following statements, concerning the general maintenance of a brushless generator, is correct? A. Paint should be applied to insulating surfaces on an annual basis. B. Alcohol should be used to remove dust and grime from windings. C. High pressure air should be used to blow out carbon dust. D. Accessible generator parts should be wiped with a clean dry rag on a periodic basis.

Description : Which of the following statements, concerning the general maintenance of a brushless generator, is correct? A. Paint should be applied to insulating surfaces on an annual basis. B. Alcohol should be used to ... . D. Accessible generator parts should be wiped with a clean dry rag on a periodic basis.

Last Answer : Answer: D

On electrical generators one of the bearings is isolated from the bedplate. This insulating block should not be painted and must be kept clean to ___________. A. protect operating personnel from shock B. create an isolated ground for the instrumentation C. allow for the expansion of the generator away from the prime mover as it warms up D. eliminate shaft currents to prevent damaging the bearings

Description : On electrical generators one of the bearings is isolated from the bedplate. This insulating block should not be painted and must be kept clean to ___________. A. protect operating personnel from shock ... the prime mover as it warms up D. eliminate shaft currents to prevent damaging the bearings

Last Answer : Answer: D

If the bearings of an electrical generator are failing more frequently than expected and the lubricating oil is sludging then you should ______________. A. check the connections to the output leads B. check the bearing insulating block on one end of the unit C. replace the bearing with a sealed roller type D. replace the thrust bearing of the prime mover

Description : If the bearings of an electrical generator are failing more frequently than expected and the lubricating oil is sludging then you should ______________. A. check the connections to the output leads B. ... replace the bearing with a sealed roller type D. replace the thrust bearing of the prime mover

Last Answer : Answer: B

Routine maintenance of dry-type transformers should include ______________. A. preventing the entrance of water from broken pipe lines steam lines B. keeping protective surfaces and insulating bushings free of dirt and conductive debris C. periodic testing of insulation resistance with a megger D. all of the above

Description : Routine maintenance of dry-type transformers should include ______________. A. preventing the entrance of water from broken pipe lines steam lines B. keeping protective surfaces and insulating bushings free of ... debris C. periodic testing of insulation resistance with a megger D. all of the above

Last Answer : Answer: D

In addition to undercutting the mica, proper maintenance of a D.C. motor's commutator includes _______________. A. side-cutting the copper segments and insulating the slots B. coating the copper surface with light machine oil for the first four hours of operation C. baking the armature in an oven at a maximum of 95°C for not over 8 hours D. all of the above

Description : In addition to undercutting the mica, proper maintenance of a D.C. motor's commutator includes _______________. A. side-cutting the copper segments and insulating the slots B. coating the copper surface with light machine ... in an oven at a maximum of 95°C for not over 8 hours D. all of the above

Last Answer : Answer: A

Temporary repairs to an open DC propulsion armature coil can be made by _____________. A. connecting the coil ends directly to a pair of negative brushes B. disconnecting coil ends, insulating each, and short circuiting the two commutator bars C. grounding the coil ends and short circuiting the commutator bar D. removing the sparking brushes

Description : Temporary repairs to an open DC propulsion armature coil can be made by _____________. A. connecting the coil ends directly to a pair of negative brushes B. disconnecting coil ends, insulating ... C. grounding the coil ends and short circuiting the commutator bar D. removing the sparking brushes

Last Answer : Answer: B

Proper storage battery maintenance includes ____________. A. keeping connections tight and casing surfaces clean B. making sure electrolyte level is below the separator plates C. insulating the terminals with naval jelly D. maintaining a high charging rate at all times

Description : Proper storage battery maintenance includes ____________. A. keeping connections tight and casing surfaces clean B. making sure electrolyte level is below the separator plates C. insulating the terminals with naval jelly D. maintaining a high charging rate at all times

Last Answer : Answer: A

A circuit breaker differs from a fuse in that a circuit breaker _____________. A. melts and must be replaced B. is enclosed in a tube of insulating material with metal ferrules at each end C. gives no visual indication of having opened the circuit D. trips to break the circuit and may be reset

Description : A circuit breaker differs from a fuse in that a circuit breaker _____________. A. melts and must be replaced B. is enclosed in a tube of insulating material with metal ferrules at each end C. gives no visual indication of having opened the circuit D. trips to break the circuit and may be reset

Last Answer : Answer: D

Electrical leads and insulation on a motor should be painted with ____________. A. heat-resisting acrylic B. heat-resisting aluminum C. insulating varnish D. insulating white lead

Description : Electrical leads and insulation on a motor should be painted with ____________. A. heat-resisting acrylic B. heat-resisting aluminum C. insulating varnish D. insulating white lead

Last Answer : Answer: C

What is the Difference Between "Insulating", "Isolating", and "Shielded Winding" Transformers?

Description : What is the Difference Between "Insulating", "Isolating", and "Shielded Winding" Transformers?

Last Answer : Insulating and Isolating transformers are identical. These terms are used to describe the isolation of the primary and secondary windings, or insulation between the two. A shielded winding transformer, ... are connected to each other electrically, are not of the insulating or isolating variety.