What is a good brand of screwdriver set for an auto mechanic?

What is a good brand of screwdriver set for an auto mechanic?
by

1 Answer

Answer :

Black & Decker is a good brand of screwdriver set for an auto mechanic.
by

Related questions

To become a Ford mechanic, will I need to attend auto mechanic school?

Description : To become a Ford mechanic, will I need to attend auto mechanic school?

Last Answer : You must go through specific training approved by Ford Motor Comany to become a Ford Mechanic. Two options are to become a certified Ford mechanic through training at either a Ford Motor Company Training Center or at Ford approved training center.

If I get auto repair through an independent mechanic rather than the dealership, will it void my warranty?

Description : If I get auto repair through an independent mechanic rather than the dealership, will it void my warranty?

Last Answer : It really depends on what sort of work is being done on the car. If you go to a mechanic for a major engine, AC, or other issue, it can void the warranty, but as theMagnuson-Moss Warranty Act ... Also, minor work such as oil changes, belts, and smaller jobs like that are fine to have done elsewhere.

What class of auto mechanic do I need to repair a vintage Ford Mustang?

Description : What class of auto mechanic do I need to repair a vintage Ford Mustang?

Last Answer : There is no particular class in order to repair a Ford Mustang. If the mechanic have the experience then they are able to repair the vintage Ford Mustang.

Where can I find an online auto mechanic class?

Description : Where can I find an online auto mechanic class?

Last Answer : You can go to autotrainingcentre.com to receive auto mechanic training online. You can also go to ATICareerTraining.edu to check out what they offer.

What is the going hourly wage for a mechanic at an auto body shop?

Description : What is the going hourly wage for a mechanic at an auto body shop?

Last Answer : It ultimately depends on what state you are working in. Most mechanics get paid fourteen to fifteen an hour in a shop. Some places will take you if you have experience for nineteen to twenty dollars an hour.

How can I get auto mechanic training?

Description : How can I get auto mechanic training?

Last Answer : You can save a lot of money by becoming your own auto mechanic. You can get training at a vocational school like ITT Technical University and the Universal Technical Institute. You can also study at a garage, by asking knowledgeable or handy friends, and by attending community automotive classes.

What are the requirements needed to become an auto mechanic?

Description : What are the requirements needed to become an auto mechanic?

Last Answer : Yes, auto mechanics does have to finish schooling to be a licensed auto mechanic. You don't have to have schooling to work as a mechanic but if something goes wrong with someone's car then you would be liable like a licensed mechanic.

What are some questions to ask when choosing an auto mechanic?

Description : What are some questions to ask when choosing an auto mechanic?

Last Answer : There are many questions one should ask their mechanic prior to the mechanic doing any work on their vehicle. One of the top question is the potential cost, length of time the car will be in the shop and the exact repairs being completed.

how do i become an auto mechanic?

Description : how do i become an auto mechanic?

Last Answer : There are different schools and training programs you can attend to become an auto mechanic, but this is a field that you can also work your way up in if you are not willing to commit to school. There are different apprenticeships and opportunities out there for you to develop your skills.

Lemon flavored vodka for screwdriver?

Description : Lemon flavored vodka for screwdriver?

Last Answer : I doubt that it would make much discernible difference in a screwdriver. Maybe a little more tart. The citron would be a nice punch to a Bloody Mary. Personally, I love lemon and think it would be a nice addition to most mixed vodka drinks. Better that the orange.

If you were to be personified as a hand tool, I.E. combination wrench, screwdriver, etc. what tool would you be?

Description : If you were to be personified as a hand tool, I.E. combination wrench, screwdriver, etc. what tool would you be?

Last Answer :

Is this oscillator adjustable with a screwdriver, and where is the link to prchase it?

Description : Is this oscillator adjustable with a screwdriver, and where is the link to prchase it?

Last Answer : answer:@XOIIO Probably a question you should direct to the company. The link below should help. http://www.vectron.com/contact/index.htm

Where can I get this unusual screwdriver?

Description : Where can I get this unusual screwdriver?

Last Answer : answer:Try this: http://www.mcmaster.com/#7266a29/=5z17i5 The other option would be to drill out the screws with something like this: http://www.mcmaster.com/#53405a41/=5z18pa

How do I release a screw whose head is flush with the surface and the notch is so worn down that the screwdriver can't make contact?

Description : How do I release a screw whose head is flush with the surface and the notch is so worn down that the screwdriver can't make contact?

Last Answer : Sometimes I have had success re- tapping the head of the screw. Using a hammer and screwdriver like a chisel. Also a but of wd-40 under the screw helps.

What is a round pattern screwdriver?

Description : What is a round pattern screwdriver?

Last Answer : A hand tool is any tool that is powered by hand

How to take out a broken screwdriver

Description : I ripped a screw in the hole. How do I take it out? You can't drill.

Last Answer : Drill only with a diamond drill.

The parkside PAS 7.2 A1 cordless screwdriver burned two resistors next to the Cˇ, C- inlet. Does anyone have the opportunity to read the values ​​on these resistors?

Description : For the parkside PAS 7.2 A1 cordless screwdriver, two resistors burned next to the C +, C- supply. Does anyone have the opportunity to read the values ​​on these resistors?

Last Answer : If the colors can be recognized, try the page with the possibility of entering the detected colors: Color marking of resistors, code marking of capacitors

Is a screwdriver a kind of wheel and axle?

Description : Is a screwdriver a kind of wheel and axle?

Last Answer : Need answer

Who uses screwdriver and a insulating tape?

Description : Who uses screwdriver and a insulating tape?

Last Answer : It is a ELECTRICIAN

Why is the best to use the right size of Philips type screwdriver?

Description : Why is the best to use the right size of Philips type screwdriver?

Last Answer : The wrong one won't engage the whole screw head, which increasesthe risk of stripping out the star pattern when you try totighten/undo the screw. And w/o the star pattern, tightening orremoving the screw becomes quite hard.

Why is the best to use the right size of Philips type screwdriver?

Description : Why is the best to use the right size of Philips type screwdriver?

Last Answer : The wrong one won't engage the whole screw head, which increasesthe risk of stripping out the star pattern when you try totighten/undo the screw. And w/o the star pattern, tightening orremoving the screw becomes quite hard.

What do you need a torx screwdriver for?

Description : What do you need a torx screwdriver for?

Last Answer : Torx screwdrivers are usually used in small electronics like computers and phones.

Can you install a TV wall mount with just a screwdriver?

Description : Can you install a TV wall mount with just a screwdriver?

Last Answer : To install a TV wall mount, an electric screwdriver or drill is recommended in order to get through into the stud.

What are the recommended screwdriver types for furniture repair and construction?

Description : What are the recommended screwdriver types for furniture repair and construction?

Last Answer : Most types which would be appropriate for this purpose are familiar names. Phillips, Flat Head, Cabinet, Robertson, Star, Hex, Clutch Head and Nut Driver, for example. Get an interchangeable bit set ... the Tack Claw. However, which type you require will depend entirely on what you are building.

How do I keep my cordless screwdriver from stripping screw heads?

Description : How do I keep my cordless screwdriver from stripping screw heads?

Last Answer : The best thing to do is to not drill the screw heads to far down, since it will have a tendency to strip the screw heads, you should also consider making sure you item is prefectly mounted due to the problems of the screw.

What is the best flat-head/phillip's head combonation screwdriver?

Description : What is the best flat-head/phillip's head combonation screwdriver?

Last Answer : The Ace Hardware store-brand combo screwdriver is excellent and durable.

Why brushless screwdriver is more preferred over brush screwdriver. From where we can buy best electric screwdriver.?

Description : Why brushless screwdriver is more preferred over brush screwdriver. From where we can buy best electric screwdriver.?

Last Answer : Brushless screwdriver has low noise low vibration and do not have the sparking issue . Brush screwdriver may give low torque after carbon brush damage.We can get best electric screwdriver from Microntech engineers . They provide kilews screwdriver

When replacing fuses, always make sure _______________. A. to stand on a rubber mat and use rubber gloves B. to use insulated pliers or screwdriver C. the fuse clips are straight, tight, and in good contact D. to increase the fuse rating 10% to guard against 'nuisance blowing'

Description : When replacing fuses, always make sure _______________. A. to stand on a rubber mat and use rubber gloves B. to use insulated pliers or screwdriver C. the fuse clips are straight, tight, and in good contact D. to increase the fuse rating 10% to guard against 'nuisance blowing'

Last Answer : Answer: C

Before touching a small capacitor connected to a de-energized circuit, or even one that is completely disconnected, you should ____________. A. gently tap the body with a screwdriver B. tag it with a de-energized tag C. be equipped with an insulated fuse puller D. short circuit the terminals to make sure that the capacitor is discharged

Description : Before touching a small capacitor connected to a de-energized circuit, or even one that is completely disconnected, you should ____________. A. gently tap the body with a screwdriver B. tag it ... insulated fuse puller D. short circuit the terminals to make sure that the capacitor is discharged

Last Answer : Answer: D

A tubular fuse should always be removed from a fuse panel with _____________. A. a screwdriver B. a pair of insulated metal pliers C. any insulated object D. fuse pullers

Description : A tubular fuse should always be removed from a fuse panel with _____________. A. a screwdriver B. a pair of insulated metal pliers C. any insulated object D. fuse pullers

Last Answer : Answer: D

Secondary tillage implements are and . A) Hammer and screwdriver. C) Tractor and bullock B) Lathe and drilling machines. D) All of the above

Description : Secondary tillage implements are and . A) Hammer and screwdriver. C) Tractor and bullock B) Lathe and drilling machines. D) All of the above

Last Answer : Tractor and bullock

Which screwdriver to choose?

Description : Which screwdriver to choose?

Last Answer : Which screwdriver to choose? As you know, the choice of a screwdriver is carried out based on its filling, as well as the needs of the buyer himself. Some of the most popular products in this area ... will be a poor and not very convenient solution, while a standard drill is the best one can offer.

Do you have a favorite auto brand?

Description : BMW for me;)

Last Answer : Audi, but I like the zigzag? (chest)

What is the best brand of auto detailing products on the market?

Description : What is the best brand of auto detailing products on the market?

Last Answer : Chemicalguys supply some of the best auto detailing products check them out at www.chemicalguys.com

What is the best brand of auto paint?

Description : What is the best brand of auto paint?

Last Answer : If you want the best brand of auto paint for your old car, I would suggest buying Star Automobile Paint for your old car because it dries fast and easy. I think it is a good brand.

Smart link to your app should auto-redirect based on which of the following parameters? A. Device type & OS B. Screen size C. OEM Brand D. All of the above

Description : Smart link to your app should auto-redirect based on which of the following parameters? A. Device type & OS B. Screen size C. OEM Brand D. All of the above

Last Answer : A. Device type & OS

How would board games like Chess and Go change if you introduced the gameplay mechanic known as "fog of war"?

Description : How would board games like Chess and Go change if you introduced the gameplay mechanic known as "fog of war"?

Last Answer : Not sure how this would work if it was a real (physical) board game. How do you un-see the person's king if it's on the chessboard? If it's an electronic game, I think it would be pretty awful. ... , narrow decisions. I don't think chess would be a better game as a result of that. No more strategy.

What is the personality of a GM Mechanic?

Description : What is the personality of a GM Mechanic?

Last Answer : I would expect that the metaphor refers to a mechanic's ability to make logical, informed and accurate assessments and conclusions as to mechanical cause-and-effect, to have a no-nonsense approach to ... think mechanics in general or GM mechanics in particular are in any way rude as a class.)

My mechanic overfilled the motor oil; will this be a concern?

Description : My mechanic overfilled the motor oil; will this be a concern?

Last Answer : http://boards.straightdope.com/sdmb/showthread.php?t=692869

Is this an "quantum mechanic" example?

Description : Is this an "quantum mechanic" example?

Last Answer : Cute. He probably just has poor scheduling and management skills if he’s such a good mechanic.

Car people: Is this mechanic lying to me?

Description : Car people: Is this mechanic lying to me?

Last Answer : This screams scam artists! But they’re not very artsy, are they? I’d be worried about my car now…Did you take it to a full service repair shop? If so, they’re trying to fleece you for sure.

Is becoming a mechanic worth it?

Description : Is becoming a mechanic worth it?

Last Answer : answer:Our local auto mechanic is considered a genius; many of us choose him over our car brand dealership mechanics. i, for example, only go to my authorized Subaru dealer for the big ones waiting now ... auto-body shops in your hood. Ask them how long they have been working for the same person.

Would you let a quantum mechanic work on your car?

Description : Would you let a quantum mechanic work on your car?

Last Answer : I tried that once, but he told me that my battery was both dead and alive. So I told him that I payed him in an alternate universe.

Roughly, how much does it cost to replace a car's thermostat (by a mechanic)

Description : Roughly, how much does it cost to replace a car's thermostat (by a mechanic)

Last Answer : It depends on how long it will take the guy to do it. Some cars need to be extensively disassembled to do this.

Do I have a case against my mechanic?

Description : Do I have a case against my mechanic?

Last Answer : answer:No. I'm sorry. The warranty covers you against the engine being built wrong or installed wrong. If it ran for 18 months and then blew a head gasket that brings a lot of variables into it that ... the warranty period as the life expectancy and figure any extra time I get out of it is a bonus.

About how much do you think a mechanic would make at a Lexus dealership?

Description : About how much do you think a mechanic would make at a Lexus dealership?

Last Answer : About $30K per year or about $2500 a month.

Do you know a Reputable Mechanic in the Greater Los Angeles area?

Description : Do you know a Reputable Mechanic in the Greater Los Angeles area?

Last Answer : answer:Euro Tech Motors(Letter F in list) 11407 West Washington Boulevard LOS ANGELES, CA 90066 (310) 915-7600 http://maps.google.com/maps?client=safari&rls=en&oe=UTF-8&um=1&ie=UTF ... =X&oi=local_group&ct=more-results&resnum=1&ved=0CCgQtQMwAA Has a lot of reviews & appears to be good.

Mechanic Question: 96 VW Golf NO SPARK!

Description : Mechanic Question: 96 VW Golf NO SPARK!

Last Answer : not necessarily. I am not the best at this but I remember that the coil pack has 12v in and two wires that go to the crank sensor. the sensor usually has a ground that goes back to the ... is correct and make sure you look in the plugs and check those connections too- things come loose. .

Need someone who is a mechanic or is good with cars?

Description : Need someone who is a mechanic or is good with cars?

Last Answer : The car I'm driving now cost $13,000. The car I drove four years ago cost $1,500. Then it cost an average of $600 per month for repairs and towing. It was a $1,500 car that cost ... might aid you in your decision: Thousand Dollar Car : http://www.youtube.com/watch?v=i3H-1YQxiXU&feature=related

How do I get my car from my mechanic that is 50 miles away?

Description : How do I get my car from my mechanic that is 50 miles away?

Last Answer : Could you find someone to give you a ride? (I’m assuming that public transportation is out of the question).