How do I keep my cordless screwdriver from stripping screw heads?

How do I keep my cordless screwdriver from stripping screw heads?
by

1 Answer

Answer :

The best thing to do is to not drill the screw heads to far down, since it will have a tendency to strip the screw heads, you should also consider making sure you item is prefectly mounted due to the problems of the screw.
by

Related questions

The parkside PAS 7.2 A1 cordless screwdriver burned two resistors next to the Cˇ, C- inlet. Does anyone have the opportunity to read the values ​​on these resistors?

Description : For the parkside PAS 7.2 A1 cordless screwdriver, two resistors burned next to the C +, C- supply. Does anyone have the opportunity to read the values ​​on these resistors?

Last Answer : If the colors can be recognized, try the page with the possibility of entering the detected colors: Color marking of resistors, code marking of capacitors

How do I release a screw whose head is flush with the surface and the notch is so worn down that the screwdriver can't make contact?

Description : How do I release a screw whose head is flush with the surface and the notch is so worn down that the screwdriver can't make contact?

Last Answer : Sometimes I have had success re- tapping the head of the screw. Using a hammer and screwdriver like a chisel. Also a but of wd-40 under the screw helps.

What tool will help me remove screw with stripped heads?

Description : What tool will help me remove screw with stripped heads?

Last Answer : You need a screw extractor,but there are several different systems.Basically you drive something into the screwhead which grabs hold of it and allows you to turn it.

Setscrews are (A) Similar to tap bolts except that a greater variety of shapes of heads are available (B) Slotted for screw driver and generally used with a nut (C) Used to prevent relative motion between parts (D) Similar to studs

Description : Setscrews are (A) Similar to tap bolts except that a greater variety of shapes of heads are available (B) Slotted for screw driver and generally used with a nut (C) Used to prevent relative motion between parts (D) Similar to studs

Last Answer : (C) Used to prevent relative motion between parts

Lemon flavored vodka for screwdriver?

Description : Lemon flavored vodka for screwdriver?

Last Answer : I doubt that it would make much discernible difference in a screwdriver. Maybe a little more tart. The citron would be a nice punch to a Bloody Mary. Personally, I love lemon and think it would be a nice addition to most mixed vodka drinks. Better that the orange.

If you were to be personified as a hand tool, I.E. combination wrench, screwdriver, etc. what tool would you be?

Description : If you were to be personified as a hand tool, I.E. combination wrench, screwdriver, etc. what tool would you be?

Last Answer :

Is this oscillator adjustable with a screwdriver, and where is the link to prchase it?

Description : Is this oscillator adjustable with a screwdriver, and where is the link to prchase it?

Last Answer : answer:@XOIIO Probably a question you should direct to the company. The link below should help. http://www.vectron.com/contact/index.htm

Where can I get this unusual screwdriver?

Description : Where can I get this unusual screwdriver?

Last Answer : answer:Try this: http://www.mcmaster.com/#7266a29/=5z17i5 The other option would be to drill out the screws with something like this: http://www.mcmaster.com/#53405a41/=5z18pa

What is a round pattern screwdriver?

Description : What is a round pattern screwdriver?

Last Answer : A hand tool is any tool that is powered by hand

How to take out a broken screwdriver

Description : I ripped a screw in the hole. How do I take it out? You can't drill.

Last Answer : Drill only with a diamond drill.

Is a screwdriver a kind of wheel and axle?

Description : Is a screwdriver a kind of wheel and axle?

Last Answer : Need answer

Who uses screwdriver and a insulating tape?

Description : Who uses screwdriver and a insulating tape?

Last Answer : It is a ELECTRICIAN

Why is the best to use the right size of Philips type screwdriver?

Description : Why is the best to use the right size of Philips type screwdriver?

Last Answer : The wrong one won't engage the whole screw head, which increasesthe risk of stripping out the star pattern when you try totighten/undo the screw. And w/o the star pattern, tightening orremoving the screw becomes quite hard.

Why is the best to use the right size of Philips type screwdriver?

Description : Why is the best to use the right size of Philips type screwdriver?

Last Answer : The wrong one won't engage the whole screw head, which increasesthe risk of stripping out the star pattern when you try totighten/undo the screw. And w/o the star pattern, tightening orremoving the screw becomes quite hard.

What do you need a torx screwdriver for?

Description : What do you need a torx screwdriver for?

Last Answer : Torx screwdrivers are usually used in small electronics like computers and phones.

What is a good brand of screwdriver set for an auto mechanic?

Description : What is a good brand of screwdriver set for an auto mechanic?

Last Answer : Black & Decker is a good brand of screwdriver set for an auto mechanic.

Can you install a TV wall mount with just a screwdriver?

Description : Can you install a TV wall mount with just a screwdriver?

Last Answer : To install a TV wall mount, an electric screwdriver or drill is recommended in order to get through into the stud.

What are the recommended screwdriver types for furniture repair and construction?

Description : What are the recommended screwdriver types for furniture repair and construction?

Last Answer : Most types which would be appropriate for this purpose are familiar names. Phillips, Flat Head, Cabinet, Robertson, Star, Hex, Clutch Head and Nut Driver, for example. Get an interchangeable bit set ... the Tack Claw. However, which type you require will depend entirely on what you are building.

What is the best flat-head/phillip's head combonation screwdriver?

Description : What is the best flat-head/phillip's head combonation screwdriver?

Last Answer : The Ace Hardware store-brand combo screwdriver is excellent and durable.

Why brushless screwdriver is more preferred over brush screwdriver. From where we can buy best electric screwdriver.?

Description : Why brushless screwdriver is more preferred over brush screwdriver. From where we can buy best electric screwdriver.?

Last Answer : Brushless screwdriver has low noise low vibration and do not have the sparking issue . Brush screwdriver may give low torque after carbon brush damage.We can get best electric screwdriver from Microntech engineers . They provide kilews screwdriver

When replacing fuses, always make sure _______________. A. to stand on a rubber mat and use rubber gloves B. to use insulated pliers or screwdriver C. the fuse clips are straight, tight, and in good contact D. to increase the fuse rating 10% to guard against 'nuisance blowing'

Description : When replacing fuses, always make sure _______________. A. to stand on a rubber mat and use rubber gloves B. to use insulated pliers or screwdriver C. the fuse clips are straight, tight, and in good contact D. to increase the fuse rating 10% to guard against 'nuisance blowing'

Last Answer : Answer: C

Before touching a small capacitor connected to a de-energized circuit, or even one that is completely disconnected, you should ____________. A. gently tap the body with a screwdriver B. tag it with a de-energized tag C. be equipped with an insulated fuse puller D. short circuit the terminals to make sure that the capacitor is discharged

Description : Before touching a small capacitor connected to a de-energized circuit, or even one that is completely disconnected, you should ____________. A. gently tap the body with a screwdriver B. tag it ... insulated fuse puller D. short circuit the terminals to make sure that the capacitor is discharged

Last Answer : Answer: D

A tubular fuse should always be removed from a fuse panel with _____________. A. a screwdriver B. a pair of insulated metal pliers C. any insulated object D. fuse pullers

Description : A tubular fuse should always be removed from a fuse panel with _____________. A. a screwdriver B. a pair of insulated metal pliers C. any insulated object D. fuse pullers

Last Answer : Answer: D

Secondary tillage implements are and . A) Hammer and screwdriver. C) Tractor and bullock B) Lathe and drilling machines. D) All of the above

Description : Secondary tillage implements are and . A) Hammer and screwdriver. C) Tractor and bullock B) Lathe and drilling machines. D) All of the above

Last Answer : Tractor and bullock

Which screwdriver to choose?

Description : Which screwdriver to choose?

Last Answer : Which screwdriver to choose? As you know, the choice of a screwdriver is carried out based on its filling, as well as the needs of the buyer himself. Some of the most popular products in this area ... will be a poor and not very convenient solution, while a standard drill is the best one can offer.

To restore SOME color, can you dye your hair without stripping/bleaching it first?

Description : To restore SOME color, can you dye your hair without stripping/bleaching it first?

Last Answer : I don’t know your skill in doing it yourself, but some color could be streaked, no need to bleach.

Is the internet stripping us of humanity?

Description : Is the internet stripping us of humanity?

Last Answer : Finding joy in the suffering of others has been a near universal human core trait since the dawn of time.

why are crows stripping maytenus green showers tree

Description : why are crows stripping maytenus green showers tree

Last Answer : Need Answer

can I freeze corn on the cob without stripping the kernels?

Description : can I freeze corn on the cob without stripping the kernels?

Last Answer : How do I? ...Freeze Freezing Corn Preparation - Select only tender, freshly-gathered corn in the milk stage. Husk and trim the ears, remove silks and wash. Corn-on-the-cob - Water ... 11 minutes. Cool promptly and completely to prevent a "cobby" taste. Drain and package. Seal and freeze.

Bark is Stripping on Gardenia What could it be?

Description : Bark is Stripping on Gardenia What could it be?

Last Answer : Need Answer

design parking lot stripping

Description : design parking lot stripping

Last Answer : Depends on the state/town ordinance. Check with city/town hall.

What episode of Alfred Hitchcock presents features a stripping women at the monologue?

Description : What episode of Alfred Hitchcock presents features a stripping women at the monologue?

Last Answer : What is the answer ?

Varicose vein stripping?

Description : Varicose vein stripping?

Last Answer : DefinitionVein stripping is surgery to remove varicose veins in the legs.Alternative NamesVein stripping with ligation, avulsion, or ablation; Saphenous vein ligationDescriptionVaricose veins are swollen, ... either:General anesthesia and will be unconscious and unable to feel pain.Spinal anesthes

What are the best and where do I find more info on weather stripping?

Description : What are the best and where do I find more info on weather stripping?

Last Answer : A garage door is important for so many reasons. First of all, it protects your garage, and anything in it, from the elements. This allows you to park your valuable vehicles in your garage without having to worry that they will be affected by the weather.

In a 4 S diesel engine, the term ‘squish’ refers to the (a) Injection of fuel in the precombustion chamber (b) Discharge of gases from the precombustion chamber (c) Entry of air into the combustion chamber (d) Stripping of fuel from the core

Description : In a 4 S diesel engine, the term ‘squish’ refers to the (a) Injection of fuel in the precombustion chamber (b) Discharge of gases from the precombustion chamber (c) Entry of air into the combustion chamber (d) Stripping of fuel from the core

Last Answer : Ans :c

Natural gasoline is produced (A) From oil wells (B) In oil refineries (C) By natural gas stripping (D) None of these

Description : Natural gasoline is produced (A) From oil wells (B) In oil refineries (C) By natural gas stripping (D) None of these

Last Answer : (C) By natural gas stripping

As the reflux ratio in a distillation column is increased from the minimum, the (A) Slope of the operating line in stripping section decreases (B) Number of plates decreases very slowly first and then more and more rapidly (C) Total cost first decreases and then increases (D) Liquid flow increases while the vapor flow decreases for a system

Description : As the reflux ratio in a distillation column is increased from the minimum, the (A) Slope of the operating line in stripping section decreases (B) Number of plates decreases very slowly first ... decreases and then increases (D) Liquid flow increases while the vapor flow decreases for a system

Last Answer : (C) Total cost first decreases and then increases

The reciprocal of stripping factor is termed as (A) Selectivity index (B) Relative volatility (C) Absorption factor (D) Murphree efficiency

Description : The reciprocal of stripping factor is termed as (A) Selectivity index (B) Relative volatility (C) Absorption factor (D) Murphree efficiency

Last Answer : (C) Absorption factor

In McCabe-Thiele method of theoretical plate calculation for a distillation column, the operating lines of stripping and rectifying sections coincide with the diagonal at __________ reflux. (A) Total (B) Minimum (C) Operating (D) Maximum permissible

Description : In McCabe-Thiele method of theoretical plate calculation for a distillation column, the operating lines of stripping and rectifying sections coincide with the diagonal at __________ reflux. (A) Total (B) Minimum (C) Operating (D) Maximum permissible

Last Answer : (A) Total

Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio (above the minimum reflux ratio), the fixed cost of the distillation column first increases and then decreases (C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Description : Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio ( ... (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Last Answer : C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux

In stripping section of continuous distillation column, the (A) Liquid is stripped of high boiler (B) Liquid is enriched with high boiler (C) Vapour is stripped of low boiler (D) None of these

Description : In stripping section of continuous distillation column, the (A) Liquid is stripped of high boiler (B) Liquid is enriched with high boiler (C) Vapour is stripped of low boiler (D) None of these

Last Answer : (B) Liquid is enriched with high boiler

In case of absorption & stripping, the interface of the liquid & gas phases are present in equilibrium, when the diffusional resistance of __________ is zero. (A) Interface (B) Gas phase (C) Liquid phase (D) All 'a', 'b' & 'c'

Description : In case of absorption & stripping, the interface of the liquid & gas phases are present in equilibrium, when the diffusional resistance of __________ is zero. (A) Interface (B) Gas phase (C) Liquid phase (D) All 'a', 'b' & 'c'

Last Answer : (A) Interface

Pick out the wrong statement (A) Co-current absorbers are usually used, when the gas to be dissolved in the liquid is a pure substance (B) In case of gas absorption, HETP is equal to HTU, when both the operating line & the equilibrium lines are parallel (C) Hatta number is important in case of gas absorption with chemical reaction (D) In actual practice, absorption is an endothermic process, while stripping is an exothermic process

Description : Pick out the wrong statement (A) Co-current absorbers are usually used, when the gas to be dissolved in the liquid is a pure substance (B) In case of gas absorption, HETP is ... reaction (D) In actual practice, absorption is an endothermic process, while stripping is an exothermic process

Last Answer : (D) In actual practice, absorption is an endothermic process, while stripping is an exothermic process

In gas-liquid contact operation, the number of ideal stages, N = (xa - xb )/(xb - x *b ). This is true when the stripping factor 'S' is (A) S > 1 (B) S < 1 (C) S = 1 (D) S = ∞

Description : In gas-liquid contact operation, the number of ideal stages, N = (xa - xb )/(xb - x *b ). This is true when the stripping factor 'S' is (A) S > 1 (B) S < 1 (C) S = 1 (D) S = ∞

Last Answer : (A) S > 1

For stripping of a gas in a counter current stripper, the operating line (A) Lies above the equilibrium curve (B) Lies below the equilibrium curve (C) Can lie above or below the equilibrium curve (D) Is always parallel to the equilibrium curve

Description : For stripping of a gas in a counter current stripper, the operating line (A) Lies above the equilibrium curve (B) Lies below the equilibrium curve (C) Can lie above or below the equilibrium curve (D) Is always parallel to the equilibrium curve

Last Answer : (C) Can lie above or below the equilibrium curve

In distillation where q is defined as the moles of liquid flow in the stripping section per mole of feed introduced, for saturated liquid feed (A) q > 1 (B) q < 1 (C) q = 1 (D) q = 0

Description : In distillation where q is defined as the moles of liquid flow in the stripping section per mole of feed introduced, for saturated liquid feed (A) q > 1 (B) q < 1 (C) q = 1 (D) q = 0

Last Answer : (C) q = 1

Stripping a thin layer of bark completely around a tree trunk will kill the tree, but a deep gouge along one side will not. Why?

Description : Stripping a thin layer of bark completely around a tree trunk will kill the tree, but a deep gouge along one side will not. Why? 

Last Answer : It must be remembered that the bark contains the phloem in its innermost region. The circumcision of even a thin layer of bark completely disrupts the movement of organic nutrients from the leaves and ... their strength, it does not reduce their ability to transport nutrients, and so they survive. 

The best method of milking is— (A) Knuckling method (B) Fisting method (C) Stripping method (D) None of these

Description : The best method of milking is— (A) Knuckling method (B) Fisting method (C) Stripping method (D) None of these

Last Answer : (D) None of these

The phenomenon occuring during pumping of a liquid solution containing dissolved gases, which may come out of the solution giving rise to gas pockets, is termed as (A) Evaporation (B) Cavitation (C) Sublimation (D) Stripping

Description : The phenomenon occuring during pumping of a liquid solution containing dissolved gases, which may come out of the solution giving rise to gas pockets, is termed as (A) Evaporation (B) Cavitation (C) Sublimation (D) Stripping

Last Answer : (B) Cavitation

Stripping of sugarcane leaves minimizes the attack of — a. Pyrillia b. Early shoot borer c. Top shoot borer d. Mealy bug

Description : Stripping of sugarcane leaves minimizes the attack of — a. Pyrillia b. Early shoot borer c. Top shoot borer d. Mealy bug

Last Answer : d. Mealy bug