Give classification of level measurement methods.

Give classification of level measurement methods.
by

1 Answer

Answer :

Classification of Liquid Level Measurement:

➢ Direct method

1. Hook type

2. Sight glass type

3. Float type

4. Dip stick

➢ Indirect method

1. Hydrostatic pressure type

2. Electrical type:

a) Capacitance level indicator

b) Radiation level detector

c) Ultrasonic level gauge

3. Radar type
by

Related questions

List any two direct methods of level measurement. Explain Hydrostatic method of level measurement. Give one advantage and one disadvantage of it.

Description : List any two direct methods of level measurement. Explain Hydrostatic method of level measurement. Give one advantage and one disadvantage of it.

Last Answer : ➢ Direct methods of level measurement Direct methods 1. Hook type 2. Sight glass type 3. Float type 4. Dip stick ➢ Hydrostatic method of level measurement. ➢ A liquid in ... - 1. Their calibration gets changed according to variations in product density. 2. Require compressed air.

List any two non-contact type level measurement methods.

Description : List any two non-contact type level measurement methods.

Last Answer : • The following are non-contact type level measurement methods 1. Ultrasonic type level measurement 2. Nuclear radiation type level measurement 3. Radar type level measurement 4. Capacitive level transducer. 5. Load cell type level transducer.

List any two advantages and applications of RADAR type level measurement.

Description : List any two advantages and applications of RADAR type level measurement.

Last Answer : ➢ Advantages: - 1. This is non-contact technology, 2. High accuracy for measurements in storage tanks and some process vessels. 3. Used on difficult hard-to-handle' applications 4. High accuracy 5. ... 6. Powders 7. Bulk solids 8. Ice cream "Premix" mixer 9. Storage tanks for toxic liquids

Compare Nuclear Radiation type and Ultrasonic level measurement.

Description : Compare Nuclear Radiation type and Ultrasonic level measurement.

Last Answer : Sr. No Nuclear Radiation Ultrasonic level  1 Can be installed in highly hazardous areas   Cannot be installed in highly hazardous areas 2 They can measure level in applications ... 7 Measurements can be skewed by density Measurements cannot be skewed by density

Explain calibration of capacitive type level measurement.

Description : Explain calibration of capacitive type level measurement.

Last Answer : ➢ Calibration of capacitance type level transmitter 1. Remove the level transmitter from the system(tank). 2. check whether transmitter shows zero reading by connecting with multimeter otherwise release the ... rotate the span screw to 20ma. 3. Repeat these steps and check all readings

Give classification of transducer on any two factors

Description : Give classification of transducer on any two factors

Last Answer : The transducers can be classified as: - 1. Active and passive transducers. 2. Analog and digital transducers. 3. On the basis of transduction principle used. 4. Primary and secondary transducer 5. Transducers and inverse transducers

Explain with neat labelled diagram measurement of flow using venturi meter

Description : Explain with neat labelled diagram measurement of flow using venturi meter

Last Answer : Explanation: It is a primary element of differential pressure Flow meters. 1) It consists of a straight inlet section, a converging conical inlet section, a cylindrical throat and diverging recovery ... abruptly, so permanent pressure loss or energy loss is very low as compared to orifice plate.

Draw and explain Doppler type flow measurement.

Description : Draw and explain Doppler type flow measurement.

Last Answer : Doppler type ultrasonic flow meter ➢ Explianation: The Doppler Effect Ultrasonic Flow meter use reflected ultrasonic waves to measure the fluid velocity. There is a change in ultrasonic ... , there will be a frequency shift at the receiver end which is protentional to the velocity

Related to ultrasonic flow meter: (i) Give any two types of it. (ii) Write any two specifications. (iii) Write two advantages over rotameter.

Description : Related to ultrasonic flow meter: (i) Give any two types of it. (ii) Write any two specifications. (iii) Write two advantages over rotameter. 

Last Answer : (i) Two types of ultrasonic flow meter:  ➢ Transit time flow meters (time differences) ➢ Doppler type. (ii) Write any two specifications: - 1. Accuracy 2. Linearity 3. Repeatability 4. ... for bidirectional flow 8. Excellent dynamic response 9. Good accuracy +-2% 10. o/p is electrical

State function of strain gauge. Give its types and explain working of any one type of it.

Description : State function of strain gauge. Give its types and explain working of any one type of it.

Last Answer : Function of strain gauge: - ➢ The strain gauge is a passive, resistive transducer which converts the mechanical elongation and compression into a resistance change. ➢ This change in ... change in resistivity. 3. Silicon and germanium are used as resistive material for semiconductor gauges

Give one application each of following transducer: (i) LVDT (ii) RVDT (iii) Capacitive (iv) Piezoelectric

Description : Give one application each of following transducer: (i) LVDT (ii) RVDT (iii) Capacitive (iv) Piezoelectric

Last Answer : i) LVDT ➢ LVDT used to measure force ➢ LVDT used to measure strain ➢ LVDT used to measure weight ➢ LVDT used to measure tension ➢ LVDT used to measure pressure ➢ The ... flow meters, non-destructive test (NDT) equipment's ➢ Piezoelectric materials are used in ultrasonic transducers.

Draw symbol and characteristic of LDR. Give material used for it.

Description : Draw symbol and characteristic of LDR. Give material used for it.

Last Answer : Symbol of LDR: - ➢ Material used for LDR 1. Light Dependent Resistor (LDR) is made from a piece of exposed semiconductor material such as cadmium sulphide. 2. Materials used ... include, lead sulphide (PbS), lead selenide (PbSe), indium antimonide (InSb) which detect light in the

Compare orifice plate with venturi tube with reference to: (i) Working principle (ii) Construction (iii) Cost (iv) Pressure loss

Description : Compare orifice plate with venturi tube with reference to: (i) Working principle (ii) Construction (iii) Cost (iv) Pressure loss

Last Answer : Venturi Flow Meter vs Orifice Plate Meter

Explain the process of calibration of pressure gauge by Dead Weight Tester.

Description : Explain the process of calibration of pressure gauge by Dead Weight Tester.

Last Answer : Deadweight Testers (DWT) are the primary standard for pressure measurement. A dead weight tester is an instrument that calibrates pressure by determining the weight of force divided by the area the force ... at each gauge reading and ensure that it is within the acceptable accuracy limits.

What is piezo electric effect? Name two piezo electric materials.

Description : What is piezo electric effect? Name two piezo electric materials.

Last Answer : Piezoelectric Effect: - When pressure or force is applied on piezoelectric crystals such as quartz crystal then an electric charge is generated across that crystal. OR Piezoelectric Effect is the ability ... Topaz 5. Tourmaline 6. lead titanate 7. lead zirconate titanate 8. lithium sulphate

Draw constructional details of C-types Bourdon tube and explain its working

Description : Draw constructional details of C-types Bourdon tube and explain its working

Last Answer : Constructional details of C-types Bourdon tube :   Explanation:- 1. The Bourdon tubes are made out of an elliptically sectioned flat tube bent in such a way as to produce the above ... pressure. 8. The materials used for Bourdon tubes are brass, phosphor bronze, beryllium copper, and steel 

State the selection criteria for transducers

Description : State the selection criteria for transducers

Last Answer : 1. Operating range 2. Operating principle 3. Sensitivity 4. Accuracy 5. Frequency response and resonant frequency 6. Errors 7. Environmental compatibility 8. Usage and ruggedness. 9. ... . 10. Stability and Reliability 11. Loading effect 12. Static characteristics 13. Noise immunity

State any two advantages of ultrasonic flow meters.

Description :  State any two advantages of ultrasonic flow meters.

Last Answer : Advantages of ultrasonic level measurement: 1. Offer no obstruction to the flow 2. o/p is insensitive to variation in viscosity, density and temperature 3. No moving parts 4. Linear relationship between ... 8. o/p is electrical 9. It is used as non-contact method of flow measurement.

List any four units of pressure.

Description : List any four units of pressure.

Last Answer : • The following are units of Pressure 1. Pascals (Pa or N/m2)—N stands for newton which is SI unit of pressure 2. Psi - Pounds per square inch (PSI) 3. Bar – 105 Pascals 4. mm Hg-millimeters of Mercury 1mm of Hg = 1 Torr 5. Torr – 133.32 Pa 6. cm H2O – 1 cmH2O = 98.068 Pa

Define active and passive transducers.

Description : Define active and passive transducers. 

Last Answer : 1. Active Transducer: - These transducers do not need any external source of power for their operation. Therefore, they are also called as self-generating type transducers. The active ... need external source of power for their operation. So they are not self-generating type transducers. 

Draw and explain the construction and working of Dead Weight Tester.

Description : Draw and explain the construction and working of Dead Weight Tester.

Last Answer : Construction:- Deadweight Tester (DWT) is used for calibration of pressure gauges . A dead weight tester is an instrument that calibrates pressure by determining the weight of force divided by ... the error at each gauge reading and ensure that it is within the acceptable accuracy limits.

Draw optical type pyrometer and list its advantages.

Description : Draw optical type pyrometer and list its advantages. 

Last Answer : Diagram of optical pyrometer ➢ Advantages: - 1) Flexibility 2) Portability 3) Monitor the temperature of moving object 4) Simple assembling of the device enables easy use of it. ... without contacting the heated body. 7) Fast response. 8) High output signal and moderate cost. 

Draw neat sketch of Rotameter and explain its working principle.

Description : Draw neat sketch of Rotameter and explain its working principle.

Last Answer : Rotameter: - A variable-area flowmeter is one where the fluid must pass through a restriction whose area increases with flow rate. The height of the float is directly proportional to the flowrate ... on glass tube and the flow rate can be determined by direct observation of the metering tube  

Name the material used and the sensitivity of following thermocouple type: (i) J (ii) K (iii) R (iv) S

Description : Name the material used and the sensitivity of following thermocouple type: (i) J (ii) K (iii) R (iv) S

Last Answer : Material used and the sensitivity of following thermocouple:

State Seeback effect and Petlier effect.

Description : State Seeback effect and Petlier effect.

Last Answer : See back Effect: - When a pair of dissimilar metals are joined at one end (junction, J1) , and there is a temperature difference between the joined ends and the open ends ( junction , ... effect: Heat is given out or absorbed when an electric current pass across a junction between two materials.

List any two advantages and two applications of Bellows.

Description : List any two advantages and two applications of Bellows.

Last Answer : Advantages: - 1. It is used to measure absolute & differential pressure. 2. It is used to measure low or medium pressure rang. 3. Bellow joints do not require access; ... . 3. low pressure gauges are suitable for chemical, petrochemical, plant construction, and cleanrooms

Draw and explain filled system thermometer.

Description : Draw and explain filled system thermometer.

Last Answer : ➢ Filled system thermometer Explanation:- Many physical properties change with temperature, such as the volume of a liquid, the length of a metal rod, the electrical resistance of a wire, ... be in absolute units. As the temperature changes ,volume of liquid changes by following equation  

Compare U tube manometer and well type manometer

Description : Compare U tube manometer and well type manometer

Last Answer : U-tube and well type manometer Sr.No. U-tube manometer well type manometer 1 Both legs are having same cross section area Both legs are having different cross section area ... cross section area. 5 Difference in heights in measured. Single height is measured.

Compare Bellows and diaphragm w.r.to construction, sensitivity, working principle and application.

Description : Compare Bellows and diaphragm w.r.to construction, sensitivity, working principle and application.

Last Answer : Sr. No Points Bellows diaphragm 1 construction 2 sensitivity Less sensitive as compared to diaphragm  More sensitive as compared to diaphragm ... as well as for vacuum, compound and differential pressure applications. II. For corrosive gases and liquids

Convert 45°C into Farhenite.

Description : Convert 45°C into Farhenite.

Last Answer : For 45 into ℉

List any two specifications of electrical pressure transducer.

Description : List any two specifications of electrical pressure transducer.

Last Answer : Specifications of electrical pressure transducer: - 1. Root Sum Squares (RSS) 2. Non-Linearity 3. Hysteresis 4. Non-Repeatability 5. Long-Term Stability 6. Zero Offset 7. Span ... Size 10. associated circuit 11. sensitivity 12. self-generated or external power source 13. Miscellaneous

State necessity of instrument calibration.

Description : State necessity of instrument calibration.

Last Answer : Necessity of instrument calibration: - ➢ To ensure reading from an instrument are consistent with other measurements. ➢ To determine the accuracy of the instrument reading. ➢ To ... Calibration Keeps Processes Safe ➢ Calibration Maintains Certification ➢ Reduce Costs from Manufacturing Errors

What is need of level measurement? Give classification of level measurement methods with two examples of each.

Description : What is need of level measurement? Give classification of level measurement methods with two examples of each.

Last Answer : In almost all industries, vast quantities of liquid such as water solvents, chemicals etc. are used in number of processes. It is widely employed to monitor as well as measure quantitatively the ... a) Capacitance level indicator b) Radiation level detector c) Ultrasonic level gauge 3. Radar type

List the different level measurement methods.

Description : List the different level measurement methods. 

Last Answer : Liquid Level Measurement Direct method 1. Hook type 2. Sight glass gype 3. Float type 4. Dip stick Indirect method 1. Hydraustatic pressure type 2. Electrical type a) Capacitance level indicator b) Radiation level detector c) Ultrasonic level gauge 3. Radar type

Give meaning of the term defect. State effects of it. Also give classification of it and methods to eliminate them.

Description : Give meaning of the term defect. State effects of it. Also give classification of it and methods to eliminate them.

Last Answer : Ans: Defect - Failure in a general sense can be regarded as a defect   Effects of Defect -Defect results in the reduction of speed or load capacity of the locomotive or which detables the ... taken by manufacturer Defects(2) and (3) can be minimised by restoring to the ideal maintenance practice

Name two methods for measurement of low, medium and high resistance. Give one advantage and one limitation of V- I method.

Description : Name two methods for measurement of low, medium and high resistance. Give one advantage and one limitation of V- I method.

Last Answer : Methods for measurement of low resistance:  1. Ammeter voltmeter method  2. Kelvin's bridge method  3. Ohm meter method  4. Potentiometer method  5. Digital/analog multi-meter ... must be infinity for perfectly accurate measurement which is not possible.  2. Connection errors.

According to the classification of hypertension diagnosed in the older adult, hypertension that can be attributed to an underlying cause is termed a) secondary. Secondary hypertension may be caused by a tumor of the adrenal gland (e.g., pheochromacytoma). b) primary. Primary hypertension has no known underlying cause. c) essential. Essential hypertension has no known underlying cause. d) isolated systolic. Isolated systolic hypertension is demonstrated by readings in which the systolic pressure exceeds 140 mm Hg and the diastolic measurement is normal or near normal (less than 90 mm Hg).

Description : According to the classification of hypertension diagnosed in the older adult, hypertension that can be attributed to an underlying cause is termed a) secondary. Secondary hypertension may be caused by a tumor of ... mm Hg and the diastolic measurement is normal or near normal (less than 90 mm Hg).

Last Answer : a) secondary. Secondary hypertension may be caused by a tumor of the adrenal gland (e.g., pheochromacytoma).

Explain different methods of classification.

Description : Explain different methods of classification.

Last Answer : Explain different methods of classification.

Which one of the following does not come under the methods of data classification? (A) Qualitative (B) Normative (C) Spatial (D) Quantitative

Description : Which one of the following does not come under the methods of data classification? (A) Qualitative (B) Normative (C) Spatial (D) Quantitative

Last Answer : (C) Spatial

Which one of the following methods is best suited for mapping the distribution of different crops as provided in the standard classification of crops in India? (A) Pie diagram (B) Chorochromatic technique (C) Isopleth technique (D) Dot method

Description : Which one of the following methods is best suited for mapping the distribution of different crops as provided in the standard classification of crops in India? (A) Pie diagram (B) Chorochromatic technique (C) Isopleth technique (D) Dot method

Last Answer : (B) Chorochromatic technique

List any two methods of reactive power measurement in 3 phase circuit.

Description : List any two methods of reactive power measurement in 3 phase circuit.

Last Answer : Methods of reactive power measurement in 3 phase circuit: (i) Two single phase wattmeter method (ii) One single phase wattmeter method

Give the classification of transformer based on: i) Construction ii) Voltage level iii) Number of phases iv) Applications

Description : Give the classification of transformer based on: i) Construction ii) Voltage level iii) Number of phases iv) Applications

Last Answer : Classification of transformer based on: i) Construction: Shell type, Core type, Berry type ii) Voltage level: Step-Up, Step-Down, iii) Number of phases: Single phase, Three phase iv) Applications: Power T/F, Distribution T/F

Draw and explain the working principle of ultrasonic level measurement system. Also give advantages, disadvantages and applications of it.

Description : Draw and explain the working principle of ultrasonic level measurement system. Also give advantages, disadvantages and applications of it.

Last Answer : Ultrasonic level detectors operate either by the absorption of acoustic energy as it travels from source to receiver or by the attenuation (frequency change) of a vibrating diaphragm face, oscillating at ... without making physical contact with the process material. 2. They have no moving parts.

What is the most general level in the hierarchical classification scheme.?

Description : What is the most general level in the hierarchical classification scheme.?

Last Answer : genus

What level of classification is higher than kingdom?

Description : What level of classification is higher than kingdom?

Last Answer : There isn't one.

The first step in derivatively classifying a new document is to determine the classification level based on existing classification guidance.?

Description : The first step in derivatively classifying a new document is to determine the classification level based on existing classification guidance.?

Last Answer : TRUE

What level of measurement is ethnicity?

Description : What level of measurement is ethnicity?

Last Answer : It is nominal.

What Blood alcohol concentration is a measurement of the level of alcohol in the bloodstream and is shown in milligrams of alcohol per how many milliliters of blood?

Description : What Blood alcohol concentration is a measurement of the level of alcohol in the bloodstream and is shown in milligrams of alcohol per how many milliliters of blood?

Last Answer : Need answer

What is the reference level for noise measurement, F1A weighted? A. -90 dBm B. -82 dBm C. -67 dBm D. -85 dBm

Description : What is the reference level for noise measurement, F1A weighted? A. -90 dBm B. -82 dBm C. -67 dBm D. -85 dBm

Last Answer : D. -85 dBm

A microarray differs from a gene fusion in that, it A- carries DNA segments from many different genes B- is not constructed by cloning C- gives direct measurement of mRNA level D- all of the above

Description : A microarray differs from a gene fusion in that, it A- carries DNA segments from many different genes B- is not constructed by cloning C- gives direct measurement of mRNA level D- all of the above

Last Answer : all of the above